|
| 1 | SUPPLYING 80 MM DIA P.V.C. HOSE PIPE OF APPROVE MAKE AND BRAND. |
| 2 | SUPPLYING 80 MM DIA HEAVY DUTY HOSE CLAMP |
| 3 | PLUMBING WORKS (A)-(II) G.I. PIPE WORKS AND FITTINGS 11. Supplying, fitting and fixing C.I. tail pieces in pair conforming to I.S. specifications.(ii) 80 mm |
| 4 | MATERIALS AND LABOUR ETC.(C)-(II) COST OF MATERIALS 15. Supply of G.I. short piece of TATA make (Above 50mm & upto150 mm long) (viii) 80 mm |
| 5 | PLUMBING WORKS (A)-(II) G.I. PIPE WORKS AND FITTINGS 1. Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of allnecessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately)(A) For Exposed Work (h) (ii) 80 mm dia. medium quality |
| 6 | PLUMBING WORKS (A)-(II) G.I. PIPE WORKS AND FITTINGS 9. C.I. sluice valve with flanged ends drilled to as per I.S. 1358/62 and having all cast iron components as per I.S. 780/71 solid forged bronze inside screw spindle having ultimate tensile strength not less than 4.72 MT per sq. cm. Spindle nut valve and seat faces of hard wear resisting, manufactured from best quality gunmetal conformingto I.S. 780/71, painted black all over with asphalt base paint tested to 21 kg (hydraulic pressure) per sq. cm., valve opening to anticlockwise direction, fitted and fixed complete. (iii) 100mm |
| 7 | PLUMBING WORKS (A)-(II) G.I. PIPE WORKS AND FITTINGS 1. Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of allnecessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (A) For Exposed Work (i) (i) 100 mm dia. medium quality |
| 8 | MATERIALS AND LABOUR ETC.(C)-(II) COST OF MATERIALS 2 Supply of galvanised iron socket with I.S.I. mark. (viii) 80 mm dia. |
| 9 | CHAPTER - VIII SUPPLYING OF MATERIALS F. MS FLANGE 8.17Supply of M.S. Flange (slipper type) as per IS-6392 TABLE 17 Thickness 12mm NB Diameter in mm 100 |
| 10 | CHAPTER - II LAYING & JOINTING PIPES, SPECIALS ETC.2.1 C.I. / D.I. Pipe & Specials 2.1 C.I. / D.I. Pipe & Specials 2.4Valves 2.4.1 Lowering, fitting and fixing of all types of valves in proper position and alignment using chain pully block or crane(for diameter above 250 mm) by providing temporary support,as required,gaskets,nuts& bolts etc.all cornplete as per specification and direction of the Engineer-in-Charge.[The rate Includes cost of flange joints]50mm dia. |
| 11 | BUILDING WORKS (F) STRUCTURAL STEEL WORKS, GRILLS, GATES ETC. A. ORIGINAL WORKS 3. Cutting to requisite length or shape departmental R.S. joists, channels, angles, tees, plates etc. (Payment to be made on area of cut surface) |
| 12 | BUILDING WORKS (F) STRUCTURAL STEEL WORKS, GRILLS, GATES ETC. B. REPAIRING 2. Welding in M.S. structural work with gas or electric: (a) Tack weld |
| 13 | GATES ETC. B. REPAIRING 2. Welding in M.S. structural work with gas or electric:(b) Continuous weld |
| 14 | Estimated amount |
| 15 | 9 % CGST |
| 16 | 9 % SGST |
| 17 | 1% CESS Please Enable Macros to View BoQ information |
