|
| 1 | Taking down chowkhats or frames not exc 1.5 sqm each(without taking off shutters from the frames), etc complete all as specificed and as per directed by Engineer-in-Charge. |
| 2 | Taking down, Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each but with shutters (without taking off shutters from the frame), etc complete all as specificed and as per directed by Engineer-in-Charge. |
| 3 | Taking down, Shutters of any description exc 1sqm but n.exc 2 sqm each, etc complete all as specificed and as per directed by Engineer-in-Charge. |
| 4 | S&F pressed steel door frame 165 x 60mm with one or more rebats including fixing lugs, hinges, lock strike plate etc complete all as specified and directed |
| 5 | S&F pressed steel door frame 105 x 60mm with one or more rebats including fixing lugs, hinges, lock strike plate, complete all as specified and directed by Engineer-in-Charge. |
| 6 | M&L for PCC 1:3:6 type C-1 (using 20 mm graded rushed stone aggregate) as in coping, filling in door frame etc. complete all as specifed and directed. |
| 7 | M&L for Solid PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube suppling and fixing in opening as per specification and drawing, etc complete all as specificed and as per directed by Engineer-in-Charge. |
| 8 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing in SSR complete all as specified and directed by Engineer-in-Charge. |
| 9 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with fullbody threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid forseparately). ® Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensionson plus side shall be acceptable but no extra payment on this account shall be made |
| 10 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 11 | S&F factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sashextruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy bodywith single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profiledimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 12 | M&L for 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercials type on both sides complete all a specified and directed. |
| 13 | S&F 2nd class hardwood 35mm thick glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads of securing glass, gauze etc and fitted to chowkats, etc complete all as specificed and as per directed by Engineer-in-Charge. |
| 14 | S&F 2nd class hard wood 35mm thick, plain, framed, panelled shutter (any number of panels) with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, the sizes of members of shutters shall be, etc complete all as specificed and as per directed by Engineer-in-Charge. |
| 15 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire & average width of aperature 1.40mm & fixed with stainless steel wire staples , etc complete all as specificed and as per directed by Engineer-in-Charge. |
| 16 | S&F SS hinges, stain less steel alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, size of hinges in 100mm, etc complete all as specificed and as per directed by Engineer-in-Charge. |
| 17 | S&F 250mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed, etc complete all as specificed and as per directed by Engineer-in-Charge. |
| 18 | S&F 150mm long aluminium anodised, barrel tower bolts of extruded section, etc complete all as specificed and as per directed by Engineer-in-Charge. |
| 19 | S&F aluminium handles 150mm long fabricated type anodised, etc complete all as specificed and as per directed by Engineer-in-Charge. |
| 20 | S&F MS helical door spring 300 mm long with roller and roller plate complete all as specified. |
| 21 | M&L for preparation of new or previously untreated surface of wood or wood based surfaces of any description over 10cm width or girth and applying two coats of synthetic enemal paint over a coat of pink primer, etc complete all as specificed and as per directed by Engineer-in-Charge. |
| 22 | S&F steel window/ventilator factory made, made out of mild steel box type and shutter suitable for double shutter i.e. glazed and gauged shutter. Glazed shutter made out of hollow section with sash bar and gauged shutter made out of hollow section without sash bar including hinges, tower bolt, handle, grill 10mm sq bar including two coat of synthetic enamel paint over one coat of red oxide primer, atrred hold fasts, PCC bed blocks for fixing hold fast, including plain/ figured glass and stainless steel wire cloth 0.36mm nominal dia of wire & average width of aperture 1.18mm & fixed with stainless steel wire staples etc complete all as per drg No CEPZ/ TD-245/01 Sheet No 1/1 & CEPZ/ TD-246/01 sheet No 1/2 & 2/2 including taking down old windows/ventilators, complete all as specified and directed. |
| 23 | Dismantling timber scantling as in fillets, rails etc under 40 sqcm in section and fixed in any position complete all as specified |
| 24 | M&L for 2nd class hard wood plain fillets sectional area exc 13 sqcm but n. exc 25 sqcm square(as in chowkats of CBs) , rectangular in section, wrought and smooth finish, secured with nails or brads complete incl polishing all as specified |
| 25 | M&L for 2nd class hard wood fillets sectional area exc 6 sqcm but n. exc 13 sqcm square , rectangular in section, Wrought and smooth finish complete all as specified |
| 26 | M&L for 18 to 20 mm thick PVC prelaminated solid board with one side decoration choice laminated and other side balancing white including 3 mm thick lipping and equal to thickness of board as in kitchen cabinet , cupboard etc fixed with screws to steel /timber frame work including taking out old u/s board etc complete all as specified and directed. |
| 27 | S&F continuous (Piano ) Hinges 30 mm width of flaps, mild steel bright finish or elecrogalvanised complete all as specified |
| 28 | S&F 150 mm long stainless steel (Fancy type) door handles for CBs of selected quality complete all as specified |
| 29 | S&F 100mm aluminium barrel tower bolts, , with bright bolt and fixed complete all as specified. |
| 30 | S&F 100 mm size Hasp and staple, Aluminium anodised, wire type, including bolt to hinge plate and fixed with screws complete all as specified and as directed. |
| 31 | S&F 40mm dia, cupboard knobs fixed with nut, screw and washer of brass, polished all as specified and as directed. |
| 32 | M&L for mild steel Mortice locks 65 mm size 4 lever type for cupboards , grade- 1 vertical type complete all as specified |
| 33 | S&F 50 mm long Magnet ball catcher made out of PVC fixed to shutter and chowkhats with SS screw all as specified and directed by Engr-in-Charge. |
| 34 | S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 sqm in each pane including hacking out old broken glass (any thickness, size, quality or description) from metal frames metal frame including punching or drilling out old glazing pins/ spring clips and providing and fixing new ones, etc complete all as specified and as per directed by Engineer-in-Charge.(Note : Work to be carried out from ground floor to fourth floor of bldg height) |
| 35 | S&F Figured glass, 4mm thick pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane including hacking out old broken glass (any thickness, size, quality or description) from metal frames metal frame including punching or drilling out old glazing pins/ spring clips and providing and fixing new ones, etc complete all as specified and as per directed by Engineer-in-Charge.(Note : Work to be carried out from ground floor to fourth floor of bldg height) complete all as specified and as directed. |
| 36 | S&F in repairs stainless steel wire cloth 0.36mm nominal dia of wire and average widthof aperture 1.40mm and fixed with stainless steel wire staples, etc complete all as specified and as per directed by Engineer-in-Charge. |
| 37 | Demolition of brick work of any description andy in any position not othterwise specifically provided for, etc complete all as specificed and as per directed by Engineer-in-Charge. |
| 38 | M&L for brick work with fly ash, modular bricks straight or curved on plan exc 6m mean radius built in CM 1:6, etc complete all as specificed and as per directed by Engineer-in-Charge. |
| 39 | M&L for rendering 10mm thick cement plaster in CM 1:6, on fair faces of brick work or concrete surfaces and finishing the surface even and smooth without using extra cement including taking down cement plaster of any description incl raking out joints, hacking for key, scrubbing down with water, etc complete all as specificed and as per directed by Engineer-in-Charge. |
| 40 | M&L for rendering 15mm thick rendering in two layers (5mm thick in CM 1:4 with using water proofing compound over 10mm thick in CM 1:6) on external surfaces of brick work or concrete surfaces even and smooth without using extra cement, including taking down cement plaster of any description incl raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and as per directed by Engineer-in-Charge. |
| 41 | M&L for rendering 10mm thick cement plaster in CM 1:6, on fair faces of brick work or concrete surfaces and finishing the surface even and smooth without using extra cement , etc complete all as specificed and as per directed by Engineer-in-Charge. |
| 42 | Supply only Integral water proofing compound, etc complete all as specificed and as per directed by Engineer-in-Charge. |
| 43 | M&L for preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer, etc complete all as specificed and as per directed by Engineer-in-Charge. |
| 44 | M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistant paint , etc complete all as specificed and as per directed by Engineer-in-Charge. |
| 45 | Dismantling floor hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, etc complete all as specificed and as per directed by Engineer-in-Charge. |
| 46 | M&L for Glazed ceramic coloured tiles 450x300x7mm thick, vertical surfaces such as dados, incl 10mm thick rendering in CM 1:4 to receive tiles set and jointed in neat cement slurry and pointed in white or coloured cement to match, etc complete all as specificed and as per directed by Engineer-in-Charge. |
| 47 | M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry incl 15mm thick screed bed of CM 1:6 and pointed in white or coloured cement to match the colour of tiles complete all as specified and as directed by Engineer -in-Charge. |
| 48 | M&L for Vitrified Ceramic coloured tiles, light shade, 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry incl 15mm thick screed bed of CM 1:6 and pointed in white or coloured cement to match etc. complete all as directed. |
| 49 | M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry incl 15mm thick screed bed of CM 1:6 and pointed in white or coloured cement to match the colour of tiles complete all as specified and as directed by Engineer -in-Charge. |
| 50 | S&F SS curtain rod 20 mm dia of approved pattern along with decorative SS brackets of approved quality and pattern fixed with screws, etc complete all as specified and as per directed by Engineer-in-Charge. |
| 51 | M&L for powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors,windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainlesssteel screws, complete all as directed by Engr-in-Charge |
| 52 | M&L for powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions of Engineer-in-charge. |
| 53 | S&F in repair aluminium extruded section body door closer Hydraulically regulated designed No 3 universal type suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 kg complete all as directed. |
| 54 | S&F powder coated butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, size of hinges in 100 mm, etc complete all as specificed and as per directed by Engineer-in-Charge. |
| 55 | S&F 5.5 mm thick tinted sheet glass ordinary quality and glazing with powder coated aluminium beading in square exc 0.5 sqm in each pane including punching or drilling out old glazing pins/ spring clips and providing and fixing new ones, etc complete all as specified and as per directed by Engineer-in-Charge. |
| 56 | S&F 5.5 mm thick tinted sheet glass ordinary quality and glazing with powder coated aluminium beading in square n.exc 0.5 sqm in each pane including punching or drilling out old glazing pins/ spring clips and providing and fixing new ones, etc complete all as specified and as per directed by Engineer-in-Charge. |
| 57 | S&F prelaminated particle board, exterior grade prelaminated both sides with decorative choice laminations , fixed with screws to timber frame work/aluminium frarme work complete all as specified |
| 58 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin- charge |
| 59 | Note:-The accepted amount will be arrived after deducting the Sch of credit i.e. Rs 46,960.00 and any other reduction if any from quoted amount. Please Enable Macros to View BoQ information |
