Name of Work:- Supply of ELECTRICAL AND ELECTRONICS ENGINEERING DEPARTMENT LAB EQUIPMENTS ARE REQUIRED AS PER NEW SYLLABUS
Sl. No.
Item Description
1
Upgradation of LabarotariesECE DEPARTMENT
2
8051 Micro controller Kit• Operating voltage: +5 V dc.• Flash memory: 4 kB (AT89C51) / 8 kB (AT89S52).• RAM: 128 bytes internal RAM.• 16 × 2 alphanumeric LCD display.• Push buttons / tactile switches.• DIP switches for digital input.• Inbuilt ADC interface: LDR, potentiometer.• Inbuilt DAC interface.• Inbuilt stepper motor driver with stepper motor.• Inbuilt DC motor driver with DC motor.• 1 × 4 LED array, 1 × 4 keypad, 1 × relay.• 1 × buzzer, 16 × 2 LCD display, 1 × PWM driver.• 1 × hardware interrupt key, inbuilt RTC.• Inbuilt EEPROM and UART module.• 4 × 7-segment display.• Supports both Assembly and C language programming.• PC interfaceable.
3
Single phase induction motor1 HP, 230 V ac, 1500 RPM with loading arrangement – 1 No.Voltmeter: (0–300) V ac, 96 × 96 mm with input terminals – 1 No.Ammeter: (0–10) A ac, 96 × 96 mm with input terminals – 1 No.Wattmeter: 2 kW, 96 × 96 mm with input terminals – 1 No.Power factor meter: 96 × 96 mm with input terminals – 1 No.Auto transformer: 0–300 V, 1ϕ variac – 1 No.MCB: 2-pole, 40 A / 230 V ac – 1 No.Digital RPM indicator with proximity sensor – 1 No.Aluminium brake drum: 230 mm diameter – 1 No.Spring balance: (0–25) kg – 02 Nos.Circuit diagram printed on front panel with instruments and connecting terminals.Motor and loading arrangement mounted on rigidchannel frame with anti-vibration mounting pads, M12 × 1.5 bolt & nut, 85 mm dia – 4 Nos.Mild steel powder-coated electrical panel tablesetup.
4
Auto TransformerInput: 230–240 V ac, 50 Hz.Output: Variable (0–270) V ac.Rating: 1 kVA.Insulation Class: Class F / Class H.Construction: Copper winding with carbon brush arrangement.Mounting: Bench-top / panel type.Protection: Suitable fuse / overload protection.
5
DTH trainer kitPower Supply:• 200 V to 240 V ac, 50 Hz. Dish Antenna: • 1.5 ft aluminium steerable dish antenna.LNB (Low Noise Block Down Converter):• Input frequency: Ku-band. • Output frequency: 950 MHz to 1450 MHz.• Conversion gain: 65 dB. • Noise temperature: 35 K (max).Set-Top Box Receiver in Trainer Form:• IF frequency: 70 MHz. • Video bandwidth: 50 Hz to 5 MHz.• Video output level: 1 Vpp at 75 Ω load.• Video polarity: Normal/Inverted, switch selectable.• Audio subcarrier frequency:Tunable from 5.0 MHz to 8.0 MHz.• Remote control provided. • HDMI cable: 10 m. Controls:• Channel selection. • Volume control. Fault Simulation:• Five built-in simulated faults for troubleshooting experiments.• IF signal disconnected. • Video output fault.• Audio mute fault. • Tuner misalignment.• RF output interruption. PCB Size:• 15\\" × 12\\" with multicolour section-wise block diagram.Standard Accessories:• 1.5 ft dish antenna.• LNB. • Trainer PCB. • Dish connecting wire.• Audio-video cable. • User manual.• Acrylic cover.• Hardware materials for assembly of dish antenna. Additional Features:• DTH subscription connection with Doordarshanfree channels.
6
SIM reader trainer kitPower Supply:• Operates on 230 V ac ±10%, 50 Hz mains supply.• Built-in regulated SMPS power supply.• Operating DC supply: 5 V / 12 V with overload and short-circuit protection.SIM Card Interface:• Supports GSM SIM cards compatible with 2G / 3G / 4G / 5G networks.• SIM card read/write interface.• Supports SIM card initialization, authentication, and communication functions.• Compatible with standard 6-pin / 8-pin SIM card sockets.Communication Interface:• USB 2.0 interface for PC communication.• RS-232 serial communication interface.• UART communication facility for embedded system interfacing.SIM Operating Parameters:• Selectable SIM clock frequencies:• 3.579 MHz • 7.159 MHz • 14.318 MHz• SIM supply voltage selection facility.• SIM reset and activation control. Supported Protocols and Standards:• GSM ETSI 07.07 and ETSI 07.05 AT command support.• ISO/IEC 7816 smart card communication support.• SIM communication command monitoring facility. Hardware Features:• On-board SIM card socket.• LED indication for:• Power status • SIM detection • Reset activity • Data transmission/reception • Built-in keypad for standalone operation. • LCD display module (128 × 64) for menu and status display.• On-board microcontroller -based control section.Software Support: • AT command execution and monitoring software.• SIM manager utility software.• Data logging and communication terminal utility.• PC -based GUI software for SIM data communication experiments. Trainer Features:• Fault simulation facility for troubleshooting experiments. • Simulation of faults such as:• SIM not detected • Clock failure • VCC failure • Reset failure• Multiple on -board test points for signal observation.• Test points for: • SIM_RST • SIM_CLK • SIM_IO • VCC • UART TX/RX• Suitable for CRO/DSO signal monitoring.• Glass epoxy PCB with educational block diagram layout. • Compact tabletop enclosed cabinet design. Construction: • Front panel with printed block diagram.• Banana test points and patching facility. Standard Accessories: • GSM SIM trainer unit. • USB communication cable.• RS-232 communication cable. • Power cord. • User manual. • Utility software CD / downloadable software package.
7
FPGA Trainer Kit• Must use industry-standard mid-range FPGA device• USB-JTAG programmable, compatible with Vivado ISE (WebPACK).• Power supply: 5 V DC through USB or external adapter.• On-board peripherals: LEDs, switches, push buttons, 7-segment display,clock source, GPIO / Pmod expansion ports, UART, VGA / HDMI, USB-UART bridge, USB cable.•User manual. Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
