|
| 1 | Upgradation of LabarotariesBasic Engineering |
| 2 | Digital Electronic Balance/Analytical balanceLoad Capacity: Minimum 500 gReadability: 0.01 gLinearity: 0.02gDisplay: LCD/LEDTare Function: RequiredTop pan typePower Supply: 220–240 V AC, 50 Hz |
| 3 | Laboratory Heating Mantle (Knitted Glass Yarn)Capacity: 500mlTemperature Range: Ambient to 350°CEnergy regulator/control knob: RequiredPower Supply: 220-240 V AC, 50 Hz |
| 4 | Joule calorimeterCopper vessel, Battery eliminator-3A, (2,4,6,8,10,12 V), Tubular rheostat 20-3.3A, one way plug key, Analog type DC ammeter (0-2A), voltmeter (0-5V), Thermometer (alcohol), stop clock |
| 5 | HOT PLATETop Plate material: Cast ironPlate Size: Minimum 8 inch diameterPower Rating: 2000 WTemperature Range: Ambient to 200°C minimumThermostatic temperature control: RequiredPower Supply: 220–240 V AC, 50 Hz |
| 6 | Electric Bunsen burnerElectrically operatedEnergy regulator/ Control knobOperating Temperature 800°CBody: Stainless SteelPower Supply Source: Corded Electric, supplied with aheavy-duty, heat-resistant,earth-grounded, 3-pin power cord (minimum length 1.2 meters).Power Consumption: Between 350 and 500WPower Supply: 220-240 V AC, 50 Hz |
| 7 | Water Distillation UnitOutput Capacity: 4 Litres Per Hour (LPH)pH Value: 5.5 to 7.0Conductivity (Raw water Distillation):3.0 – 4.0 μS/cm or lessGlassware Material: Borosilicate 3.3 Glass (Pyrex/Duran equivalent)Heating Elements: Silica-enclosed Quartz Heaters or chromium-plated element variantsPower Supply: 220–240 V AC, 50 Hz / 60 Hz, Single PhaseAutomatic water level cut-off |
| 8 | IC regulated battery Eliminator2V to 12 VIC Regulated, Input: 230V AC; Output: 0-12V DC in steps of 2V; Capacity: 1A or 2A. |
| 9 | Voltmeter0 To 5 Volt 0 To 5 ampDC voltmeter; range 0–10 V, Analog |
| 10 | Ammeter0 To 5 Volt 0 To 5 ampDC (0 - 2 Amp) |
| 11 | Rheostat50 ohms 2.8 amperes High-grade ceramic tube, oxidized resistance wire, 0.5A–5A, range 10Ω–100Ω. |
| 12 | Solar cell kitcharacterstic study kit with solar panelThe apparatus consist of variable DC power supply, LED, solar cell and two multimeters (or an ammeter and a voltmeter). A variable DC power supply of 0-5V. Light source is provided by LED. The illumination intensity of the LED can be controlled |
| 13 | Wheatstone bridge kittypically 0.001 ohm to 11.11 Mohm with inbuilt 4.5V/9V battery Series Arm: Four decade dials in steps of thousands, hundreds, tens, & units of Ohm's.Ratio Arm: The ratio arm of the bridge is capable of selecting multiplying factor of 0.001, 0.01, 0.1, 1, 10, 100, 1000 for resistance measurements. Two press keys are provided, one marked B is for battery & one marked G is for Galvanometer One toggle switch is provided for internal battery A sensitive galvanometer is provided in the bridge. Please Enable Macros to View BoQ information |
