|
| 1 | Supplying and filling in foundation and basement with Well Gravel in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification. |
| 2 | Plain Cement Concrete 1:2:4 (one cement, two Crushed Stone Sand (M- Sand) and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification |
| 3 | Wiring with 2 x 1.5 Sqmm. (22 / 0.3) PVC insulated SC unsheathed copper conductor cable of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with TW switch box inflush with wall with 5A FT switch covered with hylum sheet of 3mm thick with painting of suitable colour with continuous earth wire connection of 14 SWG TC wire for open PVC light point / fan point (for electronic regulator) (SD-19) |
| 4 | Supplyandfixingof4FeetLED18WFittingwithLED18Wtube(HigherEnd)completewithTWroundblockson wall or ceiling with PVC unsheathed FRLS Copper leads from terminals to the fitting SD 441 |
| 5 | Supply and Fixing of 1200 mm Ceiling fan includingn cost and conveyance of all materials and labour cherges etc complete.(SD-106) |
| 6 | Supply and fixing of 18W LED 3000K Square Type Recessed Fitting with LED M-1285 |
| 7 | Supplying and delivery of following Electrical items |
| 8 | 6Amps Switch |
| 9 | 6Amps Socket |
| 10 | Supply and fixing of PVC Pipe and specials including cost and conveyance of standard specification |
| 11 | 20mm Tap |
| 12 | 110mm PVC Pipe |
| 13 | 110mm PVC Tee |
| 14 | 110mm PVC Elbow |
| 15 | 40mm PVC Pipe |
| 16 | 40mm PVC Elbow |
| 17 | 40mm PVC Tee |
| 18 | 32mm CPVC Pipe |
| 19 | 32mm UPVC Elbow |
| 20 | 32mm UPVC Bend |
| 21 | 32mm UPVC TEE |
| 22 | 32mm GATe Valve |
| 23 | Supplying and delivery of FRP transparent sheets 4mm Thickness M-2949 |
| 24 | Painting two coats for Exterior surface with approved Exterior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. |
| 25 | Painting Old iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with Two coats of best approved first quality and colour of synthetic enamel paint in all floors etc., complete complying with standard specification and as directed by the departmental officers.(The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.) |
| 26 | Supplying and painting the walls with two coats of wall putty as instructed by the departmental officers including preparation of surface curing, etc., complete in all floors complying with standard specifications and as directed by the departmental officers. (The wall putty shall be got approved by the Executive Engineer before use of work). |
| 27 | Supplying and fixing in position of Kitchen Vessells including all cost of loading and unloading charges etc., complete |
| 28 | Silver bucket - No.8 |
| 29 | Silver bucket - No.10 |
| 30 | Water Mug |
| 31 | SS 'D' mug for rise |
| 32 | Tumbler |
| 33 | SS Plate |
| 34 | 5Kg Silver Kunda |
| 35 | Basin Plate |
| 36 | Rise Thuduppu |
| 37 | Knife |
| 38 | Silver Muram |
| 39 | D' Kunda |
| 40 | Mini Plate |
| 41 | Silver Tray Small size |
| 42 | Silver Cup |
| 43 | Spoon |
| 44 | 25Kg Big size Aluminium Kunda |
| 45 | 10Kg Aluminium Kunda |
| 46 | 5Kg Aluminium Kunda |
| 47 | Aluminium Milk Kunda |
| 48 | 6 Lit Aluminium Kunda |
| 49 | Big size Basin |
| 50 | Small size Basin |
| 51 | Aluminium Plate |
| 52 | Vada satty |
| 53 | Aruval manai |
| 54 | Chinese Spoon1 |
| 55 | 20 Lit Dimond Cooker |
| 56 | Mixer Grinder |
| 57 | 105 Nos. Idly Pan |
| 58 | 25 Lit R.O. System |
| 59 | Construction of sump and drain |
| 60 | Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand,silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering, ,and baling out water and cleaning and levelling the site etc.,complete 10 m3 |
| 61 | Supplying and filling in foundation and basement with Crushed Stone Sand (M- Sand) in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification. |
| 62 | Plain Cement Concrete 1:4:8 (one cement four fine aggregates and Eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying water carrying with all leads of good water compacting and labour charges and all incidential charges such as water providing etc., complete as per standard specification |
| 63 | Centering for soffits of RCC slabs of plane surface like lintels, beams ,etc.,including strutting 3m high using mild steel sheets of size 90cm X 60cm X and B.G 10 stiffened with M.S angles of size 25mm X 25mm X 3mm laid over silver Oak (C.W) joists of size 10cm X 6.5cm (spaced at about 90cm c/c )and supported dy casurina props of 10cm to 13cm dia (spaced of 75cm C/C) complying with standard specification and directed - 10 m 2 (P & D)Data 38 |
| 64 | Providing and laying in position, standardised concrete Mix M-20 Grade in accordance with IS 456 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 Cum.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 Cum.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 Cum) 7670 kg. of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials). |
| 65 | Suppling and fabricating and placing in position MS (or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost of steel and binding wire also in all floors. |
| 66 | Brick work in cement mortar 1:5 mix using Fly Ash bricks of 230x110x70mm (8 3/4\\" x 41/4\\" x 23/4\\") including cost of materials and labour charges etc. as per std. specification - 1m3 |
| 67 | Plain Cement Concrete 1:2:4 (one cement two fine aggregates and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying water carrying with all leads of good water compacting and labour charges and all incidential charges such as water providing etc., complete as per standard specification |
| 68 | Plastering with cement mortar (1:3),20 mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications |
| 69 | Plastering with cement mortar (1:5),12 mm ,thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications (S.I.306) |
| 70 | Supplying and fixing in position of FALSE CEILING ARRANGEMTNS with aluminium anodised T section and L angle frame work of grid size 60x60cm with aluminium T section and L angle of size 25x25x2mm thick and the same is supported at suitable intervals adjustable type 6mm dia MS road with suitable threaded nuts suspended roads hung from celing at 100cm c/c in both directions and fixing 60x60cm10mm thick Zib board in grid so as to give a seat to false ceiling including painting the 6 mm dia MS road etc complete complying with standard specification necessary opening and arrangments for fixing electrical fittings should be provided with suitable frame work etc complete |
| 71 | Repairs to the Old Stove (2Burner) set including all labour charges etc., |
| 72 | Supplying and fixing in position of 1.0 HP monoblock motor including all cost of labour charges etc., |
| 73 | Supplying and delivery of 1.0 HP DOL Strater including all cost etc., . Please Enable Macros to View BoQ information |
