|
| 1 | Dismantling brick work tile, masonry or tile lining in cement |
| 2 | Dismantling Reinforced cement concrete |
| 3 | Dressing side slopes and preparation of sub grade for lining. |
| 4 | Putting 1:3 (Cement:water) cement slurry with cement @ 2.25 kg per sqm on prepared bed and side slopes before laying concrete on bed and side slopes |
| 5 | Cement concrete lining 75mm. thick or less laid manually for irrigation channels, using cement concrete M-15 with cement content 325 kg/cum mixed in an automatic computerized Batching & Mixing Plant and transported to the site in transit mixers with an average lead of 1 Km(FOR TRAPEZOIDAL SECTION AND CUP SECTION OF ALL RADII) |
| 6 | Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. PCC Grade M15 |
| 7 | Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications. RCC Grade M25 With Batching Plant, Transit Mixer and Concrete Pump |
| 8 | Pointing with cement mortar (1:3 ) on brick work in substructure as per Technical Specifications |
| 9 | Plastering with cement mortar (1:3 ) on brick work in sub-structure as per Technical Specifications |
| 10 | Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications. RCC Grade M-30, Height upto 5m Using Batching Plant, Transit Mixer and Concrete Pump |
| 11 | Supplying, fitting and placing HYSD bar reinforcement in sub-structure complete as per drawing and Technical Specifications. |
| 12 | Applying priming coat with metal primer on new steel or iron work including preparation of surface. |
| 13 | Finishing with epoxy paint two or more coat at all locations prepared and applied as per manufacturer specifications complete. |
| 14 | Providing skin plate of Gates of desired shape and size complete in all respect and to entire satisfaction of engineer in-charge. |
| 15 | Providing & fixing of Galvanized nut & bolts of all size & length required. |
| 16 | Providing and Fixing in Position of flat/wedge seal including preparion of surfacecomplete in all respects and to entire satisfaction of Engineer-in-charge size75x12mm |
| 17 | Providing of hollow bulb seal( Side Seal ) and fixing of position including prepration of the surface complete in all respect and entire satisfaction of engineer in charge |
| 18 | M.S Spindle with double start or triple start threading 11‘ Height 1/3/4\\" dia. (i) up to 1.50 ton capacity |
| 19 | Providing chequred plate thick of desired shape and size complete in all respect and to entire satisfaction of engineer in-charge. |
| 20 | Providing and fixing GI pipe of dia complete in all respect and to entiresatisfaction of engineer incharge |
| 21 | CI Housing Cover with WORM AND worm wheel assembly shaft ,Handle GM Bust with triple start threading inside for spindle complete including labour charges |
| 22 | Fillet Welding with high strength steel rods complete in all respects and to entire satisfaction of enginer incharge (i) 6 mm wide. |
| 23 | Supply and fixing of common shaft duly machined at site complete in all respect |
| 24 | Fixing of coupling for common shaft with supply of spindle shaft coupling rods and cover complete in all respect |
| 25 | Commissing and testing of gates at site complete in all respects and to entire satisfaction of enginer incharge |
| 26 | Grease (1kg packing) |
| 27 | mobile oil (1 Ltr packing) |
| 28 | Drilling/Boring hole including rimming complete in all respects and to entire satisfaction of Engineer in chief |
| 29 | First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth |
| 30 | Structural steel work in angles, tees, flats, riveted, including cutting, fixing all gusset plates, bolts, nuts, rivets etc. with hoisting and erecting in position. For roof truss, well curbs, plate girders etc. of any span for building for bridges upto 15M span |
| 31 | 10mm thick Cement Plaster 1:4 |
| 32 | Any Other Item Please Enable Macros to View BoQ information |
