|
| 1 | Dismantling brick work tile, masonry or tile lining (b) In cement |
| 2 | Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with excavated surplus soil. (Depth upto 3 m) |
| 3 | Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days. (M-10) |
| 4 | Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications F RCC Grade M-25 Height upto 5m (i) Using Concrete Mixer |
| 5 | Cement concrete 1:4:8 with stone ballast 20mm gauge mixing by mechanical means |
| 6 | Cold twisted deformed (Ribbed/ Tor Steel Bar) Bars Fe-500 grade as per IS 1786-1985, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position complete. |
| 7 | Reinforced cement concrete M-20 mechanically batchmixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth. |
| 8 | Dismantling concrete (d) cement concrete plain 1:2:4 mix |
| 9 | Cement concrete lining 75mm. thick or less laid manually for irrigation channels, using cement concrete M_15 with cement content 325 kg/cum mixed in an automatic computerized Batching & Mixing Plant and transported to the site in transit mixers with an average lead of 1 Km(FOR TRAPEZOIDALSECTION AND CUP SECTION OF ALL RADII) |
| 10 | Putting 1:3 (Cement:water) cement slurry with cement @ 2.25 kg per sqm on prepared bed and side slopes before laying concrete on bed and side slopes. |
| 11 | Earth work for lip cutting for lining of irrigation channels inclusive of all allowances, lead and dressing :-(a) 0 to 1.5 m depth |
| 12 | Dressing of Side Slopes and prepration of sub grade for lining complete in all respect as per pwd specification. |
| 13 | Providing skin plate of Gates (8mm) of desired shape and size complete in all respect and to entire satisfaction of engineer in-charge. |
| 14 | Providing and fixing Structural Steel work complete in all respects and to entire satisfaction of Engineer-in-charge |
| 15 | Providing & Fixing MS Plate of various sizes complete in all respect and to entire satisfaction of engineer in-charge. |
| 16 | Steel casting as per I.S. specification & grade complete in all repects and to entire satisfaction of engineer-in-charge. |
| 17 | Providing & Fixing MS J -Bolt with nut and washer dia 20mm complete in all respect and to entire satisfaction of engineer in-charge. |
| 18 | Brass Casing as per IS specification & grade complete in all respect and to entire satisfaction of engineer in-charge. |
| 19 | Providing chequred plate 8mm thick of desired shape and size complete in all respect and to entire satisfaction of engineer in-charge. |
| 20 | Drilling/Boring hole including rimming complete in all respects and to entire satisfaction of Engineer-in-charge |
| 21 | Providing of hollow bulb seal (Side Seal) and fixing of position including prepration of the surface complete in all respect and entire satisfaction of engineer in charge |
| 22 | Providing and Fixing in Position of flat/wedge seal including preparion of surface complete in all respects and to entire satisfaction of Engineer-in-charge size 75x10mm. |
| 23 | Providing and Fixing MS Nut and Bolts of all Sizes and length required and to entire satisfaction of Engineer-in-charge. |
| 24 | Supply of Multipurpose synthetic Grease Complete in all respects and to entire satisfaction of engineer-in-charge. |
| 25 | Supply of Multigrade Mobile oil 10w-40 or 10w-50 Complete in all respects and to entire satisfaction of engineer-in-charge. |
| 26 | Providing High Speed Diesel |
| 27 | Labour for Oiling and greasing of gates |
| 28 | Applying priming coat with metal primer on new steel or iron work i/c preperation of surface. |
| 29 | Finishing with epoxy paint two or more coat at all locations prepared and applied as per manufacturer specifications complete. |
| 30 | Fillet Welding with high strength steel rods complete in all respects and to entire satisfaction of enginer incharge (i) 6 mm wide. |
| 31 | CI Housing Cover with worm & worm wheel assembly shaft ,Handle GM Bust with triple start threading inside for spindle complete including labour charges |
| 32 | Providing and Fixing MS Spindle of 0.75 Ton Capacity |
| 33 | Commissing and testing of gates at site complete in all respects and to entire satisfaction of enginer incharge |
| 34 | Providing and Fixing GI pipe of 1.5\\" dia complete in all respects and to entire satisfaction of Engineer-in-charge |
| 35 | Any Other Item Please Enable Macros to View BoQ information |
