Tender For Special Maintenance & Repair Of Iiird And Equivalent Type Residences Of Obra Colony, Obra, Sonebhadra.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
03 Aug 2026
2 days left
EMD
10 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Prayagraj → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender for Special Maintenance & Repair Of Iiird And Equivalent Type Residences Of Obra Colony, Obra, Sonebhadra.
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 22-Jun-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 25-Jun-2026 |
| 2 | 25-Jun-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 29-Jun-2026 |
| 3 | 22-Jun-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 25-Jun-2026 |
| 4 | 25-Jun-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 29-Jun-2026 |
| 5 | 22-Jun-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 25-Jun-2026 |
| 6 | 29-Jun-2026 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 02-Jul-2026 |
| 7 | 14-Jul-2026 | 2nd Manual Extension of Bid Submission and Opening Date | Date | 24-Jul-2026 |
| 8 | 24-Jul-2026 | 3rd Manual Extension of Bid Submission and Opening Dates | Date | 03-Aug-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Grand Total From Detailed Price Bid BILL OF QUANTITIES Name of Works: “Special Maintenance & Repair of IIIrd and equivalent type residences of Obra Colony, OBRA, Sonebhadra\\" NOTE: (1) Bidder shall quote Premium Percentage \\"Excess\\" or \\"Less\\" or \\"At Par\\" on Total Overall Amount (Excluding GST) only. Provision of the same is avaiable at Last Line of this Sheet pertaining to \\"Select Bidder Input\\" (2) Bidder shall quote Rate of GST for Individual BOQ Items from corresponding Drop Down and mention SAC/HSN Code in correpsonding Cell. (3) Any other Cells / Columns / Rows shall not be modified / revised / tempered. (4) Evlaution shall be done on \\"Lump-Sum\\" basis on Total Quoted Price (Including GST). For detailes, Condition No. 22 of Section-III (Bid Data Sheet) of Tender Document may please be referred. Sr. No. DESCRIPTION UNIT QTY RATE (Rs.) AMOUNT (Rs.) Amount After quoted Excess/Less/At Par HSN / SAC Code GST in % Amount Including quoted Excess/Less/At Par and GST |
| 2 | R&M Type-III Qtr Obra Sch Civil (Scheduled Item) |
| 3 | DSR 2.8.1 Earthwork <1.5Mtr dep lead 50M2.8.1 Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. |
| 4 | DSR 2.25 Filling <20cm in depth lead 50M2.25 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to1.5 m. |
| 5 | DSR 2.9.1 Excavwork <1.5Mtr wid lead 50M2.9.1 Excavation work in ordinary rock by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a lead of 50 m. |
| 6 | DSR 6.3.2 B/W (modular)cement mortar 1:66.3.2 Brick work with common burnt clay machine moulded perforated modular bricks of class designation 12.5 conforming to IS: 2222 in superstructure above plinth level up to floor five level in cement mortar 1:6 (1 cement : 6 coarse sand). |
| 7 | DSR 6.1.2 B/W F.P.S(non modular)C: M 1:66.1.2 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 8 | DSR 4.1.10 P&L Cement Concrete of 1:5:104.1.10 Providing and laying in position cement concrete of 1:5:10 (1 cement : 5 coarse sand (zone-III): 10 graded stone aggregate 40 mm nominal size) excluding the cost ofcentering and shuttering - All work up to plinth level. |
| 9 | DSR 4.1.3 P&L W up to plinth level 1:2:44.1.3 Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering # All work up to plinth level 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). |
| 10 | DSR 5.1.3 P&L up to plinth level 1:2:45.1.3 Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement -All work up to plinth level with 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size). |
| 11 | DSR 11.3.1 40 mm thik 1:2:4 cement concr11.3.1 40mm thick 1:2:4 plain cement concrete floor with approved coarse sand and 20mm gauge graded stone ballast laid in panels finished with 3mm floating coat of net cement and marble dust in 5:1 as specified and removing any overlapping mortar at the joints of panels and giving them uniform finish including supply of all materials, labours, T&P etc. require for proper completion of work. |
| 12 | DSR 6.13.2 B/W F.P.S. Cement mortar 1:46.13.2 Half brick masonry with F.P.S. bricks of class designation 75 in superstructure above plinth level up to floor V level Cement mortar 1:4 (1 cement :4 coarse sand) |
| 13 | DSR 5.3 Reinforced cement concrete 1:2:45.3 Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). |
| 14 | DSR 5.22.1 Steel reinforcement for RCC.5.22.1 Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 15 | DSR 13.1.1 12 mm cement plaster mix 1:413.1.1 12 mm cement plaster of mix : 1:4 (1 cement: 4 fine sand) up to height of 10 M from ground level. |
| 16 | DSR 13.1.2 12 mm cement plaster mix 1:613.1.2 12 mm cement plaster of mix : 1:6 (1 cement: 6 fine sand) up to height of 10 M from ground level. |
| 17 | DSR 13.7.2 neat cement of mix : 1:413.7.2 12 mm cement plaster finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand). |
| 18 | DSR 11.13.1 P&F glass Strips in joints11.13.1 Providing and fixing glass strips in joints of terrazzo/cement concrete floors 40 mm wide and 4 mm thick. |
| 19 | DSR 12.21.1 P&F Gola 75x75mm deep chase12.21.1 Providing & laying Gola 75x75mm deep chase cement concrete in 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 10 mm & down gauge) including finishing with cement mortar 1:3 (1 cement: 2 fine sand) as per standard design |
| 20 | DSR 10.1 Structural steel work in S-Sec10.10 Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 21 | DSR 10.22 Welding by gas or electric pla10.22 Welding by gas or electric plant including transportation of plant at site etc. complete. |
| 22 | DSR 9.53 S/F 300x40x6mm M.S. hold-fast9.53 S/F of 300x40x6mm M.S. hold-fast including 10mmx10mm long bolt and nut its grouting with C.C. 1:2:4 of size 300x230x150mm and also including cost of all material, labour, T&P. |
| 23 | DSR 9.62.2 P&F ISI marked oxidised M.S.9.62.2 Providing and fixing ISI marked oxidised M.S. sliding door bolts of size 250x16 mm with nuts and screws etc. complete. |
| 24 | DSR 9.63.1 P&F M.S. tower bolt 250x10 mm9.63.1 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) of size 250x10 mm with necessary screws etc. complete. |
| 25 | DSR 9.66.1 P&F ISI oxidised M.S. handles9.66.1 Providing and fixing 125 mm ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete |
| 26 | DSR 9.1.2 P&Fwood work in frames of D&W9.1.2 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length ( hold fast lugs or dash fastener shall be paid for separately) Sal wood. |
| 27 | DSR 9.20.1 P&F ISI flush door shutters9.20.1 Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws |
| 28 | DSR 9.9.2.2 P&F glazed shutters for door9.9.2.2 Providing and fixing glazed shutters for doors, windows and clerestorywindows using 4 mm thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screwsKiln seasoned and chemically treated hollock wood30 mm thick. |
| 29 | DSR 9.51.1 P&F fly proof galvanized M.S.9.51.1 Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete.With 2nd class teak wood beading 62X19 mm |
| 30 | DSR 9.57.1 P&F butt hinges 125x65x2.12mm9.57.1 Providing and fixing ISI marked oxidised M.S. pressed butt hinges of size 125x65x2.12 mmwith necessary screws etc. complete |
| 31 | DSR 15.7.1 Demolishing B/W in mud mortar15.7.1 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge. In mud mortar. |
| 32 | DSR 15.7.4 Demolish B/W in cement mortar15.7.4 Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge. In cement mortar. |
| 33 | DSR 15.2.1 Demolish cement concrete1:3:615.2.1 Demolishing nominal cement concrete 1:3:6 or richer mix (i/c equivalent designmix) manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer- in -charge. |
| 34 | DSR 15.56 Dismantling old plaster or ski15.56 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meters lead. |
| 35 | DSR 15.4 Demolishing R.B. manually/mech.15.4 Demolishing R.B. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in- charge. |
| 36 | DSR 0114 Maintenance work With one Belda0114 Maintenance work With one mason/Carpenter /Plumber and one helper. Beldar |
| 37 | DSR 0155 Maintenance work With one Mason0155 Maintenance work With one mason/Carpenter /Plumber and one helper. Mason |
| 38 | DSR 0139 Mainte work With skilled Beldar0139 Maintenance work With one mason/Carpenter /Plumber and one helper. Skilled Beldar |
| 39 | DSR 15.3 Demolishing R.C.C manually/mech15.3 Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 40 | DSR 11.36/8.31 P&F ceramic wall tiles11.36 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of] any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 41 | DSR 11.37 P&F Ceramic glazed floor tile11.37 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory , Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc., complete. |
| 42 | DSR 11.46.2 Vitrified tiles of 600x600mm11.46.2 Providing and laying Vitrified tiles of 600x600 mm size (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @3.3kg/sqm including grouting the joint with white cement & matching pigments etc. complete. |
| 43 | DSR 22.8.1 P&F courses water proofing22.8.1 Providing and laying four courses water proofing treatment with bitumen felt over roofs consisting of first & third courses of blown bitumen 85/25 or 90/15 conforming to IS:702 applied hot @ 1.45 KG per square meter of area of each courses, second coarse of roofing felt type 3 grade I conforming to IS: 1322 (Hessian based self finished bitumen felt) and fourth and final course of stone grit 6 mm and down size or pea sized gravel spread at 6 cubic dm per sqm including preparation of surface but excluding grading complete. |
| 44 | DSR 18.12.1 P&F G.I. pipes 15mm dia nom18.12.1 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 15mm dia nominal bore |
| 45 | DSR 18.12.2 P&F G.I. pipes 20mm dia nomi18.12.2 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 20mm dia nominal bore |
| 46 | DSR 18.46.1 G .I. Union in 15mm dia G.I.18.46.1 Providing and fixing G .I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (Newwork). 15mm dia nominal bore |
| 47 | DSR 18.46.2 G .I. Union in 20mm dia G.I.18.46.2 Providing and fixing G .I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (Newwork). 20mm dia nominal bore |
| 48 | DSR 18.46.3 G .I. Union in 25mm dia G.I.18.46.3 Providing and fixing G .I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (Newwork). 25mm dia nominal bore |
| 49 | DSR 18.15.1 P&F 15mm nominal brass bibDSr 18.15.1 Providing and fixing 15 mm nominal bore brass bib cock of approved quality. |
| 50 | DSR 18.16.1 P&F 15mm nominal brass stopDSR 18.16.1 Providing and fixing 15 mm nominal bore brass stop cock of approved quality. |
| 51 | DSR 18.51.1 P&F 15mm nominal C.P. brassDSR 18.51.1 Providing and fixing 15 mm nominal bore C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gm. |
| 52 | DSR 18.52.1 P&F 15mm nominal C.P. brasDSR 18.52.1 Providing and fixing 15 mm nominal bore C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:893. |
| 53 | DSR 18.56.2 P&F PTMT pillar cock 15mm noDSR 18.56.2 Providing and fixing PTMT pillar cock 15 mm nominal bore, 125 mm long foam flow, weighing not less than 120 gmsof approved quality and colour |
| 54 | DSR 18.64 PTMT swivelling shower, 15 mmDSR 18.64 Providing and fixing PTMT swivelling shower, 15 mm nominal bore, weighing not less than 40 gms |
| 55 | DSR 17.32.2 P&F mirror superior glassDSR 17.32.2 Providing and fixing mirror of superior glass (of approved quality) and of rectangular shape 453x357 mm size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing. |
| 56 | DSR 17.20.1 P&F white solid plastic seatDSR 17.20.1 Providing and fixing white solid plastic seat with lid for pedestal type W.C. pan complete. |
| 57 | DSR 17.18.1 P&F 10 lit. capacity whiteDSR 17.18.1 Providing and fixing 10 lit. capacity white P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 58 | DSR 17.13.2 P&F Orissa pattern W.C. panDSR 17.13.2 Providing and fixing white vitreous china water closet squatting pan (Indian type) : Orissa pattern W.C. pan of size 580x440 mm |
| 59 | DSR 17.2.1 P&F white vitreous china pedeDSR 17.2.1Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : 17.2.1 W.C. pan with ISI marked white solid plastic seat and lid |
| 60 | DSR 12.41.2 P&F on wall face single sockDSR 12.41.2 Providing and fixing on wall face single socketed 110 mm diameter unplasticised Rigid PVC rain water pipes conforming to IS : 13592 TypeA, including jointing withsealring conforming to IS : 5382, leaving 10 mm gap for thermal expansion |
| 61 | DSR 12.41.1 P&F on wall face unplasticisDSR 12.41.1 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.75 mm diameter |
| 62 | DSR 12.42.3.2 P&F wall face110x110x110mmDSR 12.42.3.2 Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 110x110x110 mm |
| 63 | DSR 12.42.3.1 P&F wall face 75x75x75mmDSR 12.42.3.1 Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 75x75x75 mm |
| 64 | DSR 4.12 Extra for P&M water proofingDSR 4.12 Extra for providing and mixing water proofing material in cement concrete work in doses by weight of cement as per manufacturer#s specification |
| 65 | DSR 5.9.16.2 Centering & shuttering etc.DSR 5.9.16.2 Centering and shuttering including strutting, propping etc. and removal of form for all heights Edges of slabs and breaks in floors and walls Above 20 cm wide. |
| 66 | DSR 15.60 Disposal of building rubbishDSR 15.60 Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading as approved by Engineer-in-charge, within 3 km distance beyond 50 m initial lead, for all leads including all lifts involved. |
| 67 | DSR13.61.1 Painting with synthet enamelDSR13.61.1 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
| 68 | DSR13.87.1 White washing with lime on olDSR13.87.1 White washing with lime on old work (two or more coats) to give an even shade. |
| 69 | DSR 13.109.2 Finishing walls with waterDSR 13.109.2 Finishing walls with water proofing cement paint of required shade on old work (one or more coats @ 2.20 kg/10 sqm) complete. |
| 70 | DSR 13.41.1 Distempering with oil boundDSR 13.41.1 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade :New work (two or more coats) over and including water thinnable priming coat with cement primer |
| 71 | DSR14.54.1/13.99 Painting synthet enamelDSR 14.54.1 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade one or more coats on old work. |
| 72 | DSR 13.50.1 mixed pink or Grey primerDSR 13.50.1 Applying priming coat with ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood). |
| 73 | DSR13.50.3 mixed red oxide zinc chromateDSR13.50.3 Applying priming coat with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works. |
| 74 | DSR13.91Removing dry&oil bound distemperDSR13.91 Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 75 | DSR 13.44.1 Finishing wall with waterDSR 13.44.1 Finishing wall with water proofing cement paint of required shade new work (two or more coats applied) @ 3.84 kg /10sqm) complete |
| 76 | DSR13.80 Apply white cement based puttyDSR 13.80 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete |
| 77 | DSR 16.18.1 Fencing with G.I. barbedDSR 16.18.1 Fencing with G.I. barbed with angle Iron post palced at required distance embedded in ciment concrete blocks , every 15 th post, las but one end pos &corner post shall be strutted on both side &end post on one side only and provded with horizontal lines and two diagonals interwoven with horizontal wires, of barbe wire weighing 9.38 kg per 100 m(Minimum), between the two posts fitted and fixed with G. I. staples, turn buckles etc. complete.(Cost of post, struts, earth work and concrete work to be paid for separtely):-Payment to made per metre cost of total of barbed wire used. |
| 78 | DSR 24.2 P&F double scaffolding systemDSR 24.2 Providing and fixing double scaffolding system (cup lock type) on the exterior side of building/structure, upto 25 metre height, above ground level, including additional rows of scaffolding in stepped manner as per requirement of site, made with 40mm dia M.S. tube, placed 1.5 metre centre to centre, horizontal & vertical tubes joint with cup & lock system with M.S. Tubes, M.S. tube challis, M.S. clamps and staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for execution of work of cleaning and/ or pointing and/ or applying chemical and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connecting with the building etc, wherever required, if feasible, for inspection of work at required locations with essential safety features for the workmen etc., complete as per directions and approval of Engineer-in-charge. Note:- (1) The elevational area of the scaffolding shall be measured for payment purpose. (2) The payment will be made once only for execution of all items for such works. |
| 79 | DSR 18.8.1 P&F (CPVC)pipes 15mm nominalDSR Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the wall 18.8.1 (15 mm nominal outer dia Pipes) |
| 80 | DSR 18.8.2 P&F (CPVC)pipes 20mm nominalDSRProviding and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the wall 18.8.2 (20 mm nominal outer dia Pipes) |
| 81 | DSR 18.8.3 P&F (CPVC) pipes 25mm nominalDSR Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge.Concealed work, including cutting chases and making good the wall 18.8.3 (25 mm nominal outer dia Pipes) |
| 82 | DSR17.10.2.1 P&F kitchen sink 610x510mmDSR17.1 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required :17.10.2.1 610x510 mm bowl depth 200 mm |
| 83 | DSR 17.7B P&F wash basin with C.I. brackDSR 17.7B Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock |
| 84 | DSR 17.28.2.1 P&F 32mm dia P.V.C. wasteDSR 17.28 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 17.28.2.1 32 mm dia |
| 85 | DSR18.48 Providing & placing on terraceDSR18.48 Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 86 | DSR11.55 P&L flamed finish Granite stoneDSR 11.55 Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : 11.55.1 Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent |
| 87 | HDSR 2.34 P&L Sc. NO 1 grass turf with eDSR HORTICULTURE 2.34 Providing & laying Selection NO 1 grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with required tools wooden and than rolling the surface with light roller make the surface smoothen and light watering the same maintenance for 30 days or more till the grass establish properly,as per direction of officer in charge. |
| 88 | DSR 18.12.3 GI PIPE, 25MM NOMINAL BOREDSR 18.12 Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc.18.12.3 25mm dia nominal bore |
| 89 | R&M Type-III Qtr Non Sch Civil |
| 90 | NS:1 B/W F& plinth in Cement mortar 1:6NS:1 Brick work with modular bricks of class designation 75 in foundation and plinth in Cement mortar 1:6 (1 cement : 6 coarse sand). with old and dismantled bricks also to be supplied by the deptt. free of cost. |
| 91 | NS:2 Painting of name plate/numbe plateNS:2 Painting of name plate/number plate with paint of approved quality including painting of name/quarter number & painting of base etc.. with black and yellow/white paint respectively as per direction of Engineer-in-charge. |
| 92 | NS:3 Fixing of door, wooden shutters incNS:3 Fixing of door, wooden shutters including loading, unloading and cartage of shutter from civil store to site and also including adjustment of fittings such as hinges, Tower,bolt, L-drops, handles and shakal-kunda etc. |
| 93 | NS:4 Repair of wooden shutter such asNS:4 Repair of wooden shutter such as repair of replacement of top, bottom and intermediate rails part of style, only panels including dismantling and repairing the repaired shutter in proper position and fixing and adjustment of oxidized Iron fittings. |
| 94 | NS:5 P&F following 12 mm plywood sheetNS:5 Providing & fixing following plywood sheet wherever needed with fevicol, screws nails etc. including cost of all materials labours T&P etc., complete. 12 mm ply |
| 95 | NS:6 P&F following 6 mm plywood sheetNS:6 Providing & fixing following plywood sheet wherever needed with fevicol, screws nails etc. including cost of all materials labours T&P etc., complete. 6 mm Ply |
| 96 | NS:7 S/F of welded mesh 10SWG of75x25mmNS:7 S/F of welded mesh 10SWG of size 75x25mm including cutting and welding over existing angle/pipe frames including supply and welding of 20x5mm M.S. flat over weld mesh. |
| 97 | NS:8 Scraping & removing old & torn outNS:8 Scraping & removing old & torn out tar felts / R.P. Tissues and grit, A.C/G.C sheet, flat roofs of all elevation as and where required including cleaning the surface properly so as to make it free from foreign material and disposal of the free foreign material and disposal of the same in dust bin as directed by Engineer-in-Charge including cost of all materials, labour, T&P etc required for proper completion of work. |
| 98 | NS:9 Providing ,laying & jointing glazedNS:9 Providing ,laying and jointing glazed stoneware pipes grade'A' of 150 mm diameter with stiff mixture of cement mortar in the proportion of 1:1 ( 1 cement : 1 fine sand ) including testing of joints etc. complete.Laying of S.W pipe line including its all fitting like bend, tee etc in proper slope over a concrete bed of 1:5:10 and joints fixed with 1:2 cement sand mortar including dismantling of chocked damaged S.W. Pipe, bend, tee . |
| 99 | NS:10 P&L of 26 SWG chicken mesh of GINS:10 Providing & laying of 26 SWG chicken mesh of G.I wire @ 10x10mm c/c laid down on roof in one layer with the help of mails @ 0.50M c/c including side overlapping not less then 100mm The mesh should be tightened on wire mails on roof with clear gap between roof and layer of mesh not less then 5mm including cost of all material, labour, T&P etc. required for proper completion. |
| 100 | NS:11 Trimming of branches of treesNS:11 Trimming of branches of trees of different type of species standing in colony area using Hydra, expert labours, Saw, Rope, Axe and other T&P's required for completion of work including all safety majours for the workers and stacking of branches of trees properly as per the direction of Engineer-in-charge. Work also including cleaning the site of debris and remain the trees. |
| 101 | NS:12 S&F of AC/GC sheet roofing fixedNS:12 Supplying and fixing of AC/GC sheet roofing fixed with J-hook or U-bolts 8 mm dia, GI limpet and bitumen washer complete including cost of all material, labour, T&P etc. required for proper completion of work but excluding cost of J hook or U bolts CI limpet and bitumen washer which shall be paid in respective item. |
| 102 | NS:13 P&M treatment of expansion jointNS:13 Providing and making treatment of expansion joint as per drawing and designed as directed by Engineer-In-Charge including supply of all materials, labour, T&P etc. required proper completion of work. |
| 103 | NS:14 S&F of GI hook with nut,limpet&bitNS:14 Supply & fixing of GI hook with nut, limpet and bitumen washer 8 mm dia |
| 104 | NS:15 S&F of U hook with nut,limpet&bituNS:15 Supply & fixing of U hook with nut, limpet and bitumen washer 8 mm dia |
| 105 | NS:16 S&F of limpet and bitumen washerNS:16 Supply & fixing of limpet and bitumen washer with nut |
| 106 | NS:17 S&F of 3 mm thick commercial plyNS:17 Supplying and fixing of 3mm thick commercial ply in false ceilling including cost of nails, screw etc required for proper completion of work including cost of all materials, Labour, T&P's etc required for proper completion of work. |
| 107 | NS:18 S&F of seasoned country wood beadNS:18 supply and fixing of seasoned country wood beads of size 40x12 mm nails over false ceilling including cost of all material, Labour, T&P's etc required for proper completionof work. |
| 108 | NS:19 Country wood wrought framed &fixedNS:19 country wood wrought framed and fixed plain wood in roof, trusses, purlines, ceilling etc including cost of all materials, labour, T&P;s etc required for proper completion of work. |
| 109 | Type-III Electrical |
| 110 | HOPD-1 All wiring & Fixture 73 Type-IIIComplete new electrical wiring and fixing off all the required fixtures in 73 type-III quarters (with 01 No. of additional room plus washroom) of Obra Project Colony, Obra |
| 111 | HOPD-2 All wiring & Fixture 6 Type-IIIComplete new electrical wiring and fixing off all the required fixtures in 06 type-III quarters of Obra Project Colony, Obra |
| 112 | HOPD-3 G.I. Earth pipe 2.5 meter longEarthing with G.I. Earth pipe 2.5 meter long, 40 mm dia including accessories and providing masonary enclosure etc. with charcoal/coke and salt as per IS3043/1987 revised up to date. |
| 113 | CEMD-1 1.5mm2 PVC insul single core/REDSUPPLY 1.5mm2 PVC insulated single core , Red Colour,Copper conductor cable |
| 114 | CEMD-2 1.5mm2 PVC insul single co/BLACKSUPPLY 1.5mm2 PVC insulated single core , Black Colour,Copper conductor cable |
| 115 | CEMD-3 1.5mm2 PVC Insu single cor/BLUESUPPLY 1.5 mm2 PVC insulated single core , Blue Colour,Copper conductor cable |
| 116 | CEMD-4 1.5mm2 PVC Insu single cor/greeSUPPLY 1.5 mm2 PVC insulated single core , Green Colour,Copper conductor cable |
| 117 | CEMD-5 2.5mm2 PVC insulated single coreSUPPLY 2.5mm2 PVC insulated single core, Red Colour, Copper conductor cable |
| 118 | CEMD-6 2.5mm2 PVC insulated single coreSUPPLY 2.5mm2 PVC insulated single core, Black Colour, Copper conductor cable |
| 119 | CEMD-7 7\\"x4\\" Board with sunmica topSUPPLY OF 7\\"x4\\" Board with sunmica top |
| 120 | CEMD-8 Ceiling rose 3pin, 5 Amp.SUPPLY OF Ceiling rose 3pin, 5 Amp. |
| 121 | CEMD-9 30mm PVC Casing caping of lengthSUPPLY OF 30mm PVC Casing caping of length 2mtr |
| 122 | CEMD-10 8\\"x10\\" Board with sunmica topSUPPLY OF 8\\"x10\\" Board with sunmica top |
| 123 | CEMD-11 4\\"x4\\" Board with sunmica topSUPPLY OF 4\\"x4\\" Board with sunmica top |
| 124 | CEMD-12 PVC gulli (38mm length, 50Nos)Supply of PVC gulli (38mm length, 50Nos) |
| 125 | CEMD-13 PVC Batton HolderSupply of PVC Batton Holder |
| 126 | CEMD-14 5Amp Switch piano typeSupply of 5Amp Switch piano type |
| 127 | CEMD-15 15Amp Switch piano typeSupply of 15Amp Switch piano type |
| 128 | CEMD-16 5Amp SocketSupply of 5Amp Socket |
| 129 | CEMD-17 15Amp SocketSupply of 15Amp Socket |
| 130 | CEMD-18 Ding-dong bellSupply of Ding-dong bell |
| 131 | CEMD-19 Bell push piano typeSupply of Bell push piano type |
| 132 | CEMD-20 S.S. Screw 6mmx38mm(100 No. PerSupply of S.S. Screw 6mmx38mm(100 No. Per pkt.) |
| 133 | CEMD-21 100W mini fan regulatorSupply of 100W mini fan regulator |
| 134 | CEMD-22 16A MCBSupply of 16A MCB |
| 135 | CEMD-23 32A MCBSupply of 32A MCB |
| 136 | CEMD-24 2+4 way SPN single door MCB DBSupply of 2+4 way SPN single door MCB DB |
| 137 | CEMD-25 2+2 way SPN single door MCB DBSupply of 2+2 way SPN single door MCB DB |
| 138 | CEMD-26 Junction box for PVC casing andSupply of Junction box for PVC casing and caping |
| 139 | CEMD-27 Internal angle for 30mm PVC casiSupply of Internal angle for 30mm PVC casing and caping |
| 140 | CEMD-28 External angle for 30mm PVC casiSupply of External angle for 30mm PVC casing and caping |
| 141 | CEMD-29 T for 30mm PVC casing and capinSupply of T for 30mm PVC casing and caping |
| 142 | CEMD-30Coupler for 30mm PVC casing and cSupply of Coupler for 30mm PVC casing and caping |
| 143 | CEMD-31 LED Tube light 20WSupply of LED Tube light 20W |
| 144 | CEMD-32 PVC TapeSupply of PVC Tape |
| 145 | CEMD-33 S.S. Screw 6mmx13mm(100 No. PerSupply of S.S. Screw 6mmx13mm(100 No. Per pkt.) |
| 146 | CEMD-34 LED with complete fitting 70WSupply of LED with complete fitting 70W |
| 147 | CEMD-35 2CX6mm2 Aluminium CableSupply of 2CX6mm2 Aluminium Cable |
| 148 | CEMD-36 32A 2pole isolatorSupply of 32A 2pole isolator |
| 149 | CEMD-37 63A 2pole isolatorSupply of 63A 2pole isolator |
| 150 | CEMD-38 LED Bulb 9WSupply of LED Bulb 9W |
| 151 | CEMD-39 Exhaust FanSupply of Exhaust Fan |
| 152 | CEMD-40 Button Pin (100 No. Per pkt.)Supply of Button Pin (100 No. Per pkt.) |
| 153 | CEMD-41 2CX10mm2 Aluminium CableSupply of 2CX10mm2 Aluminium Cable |
| 154 | HOPD4 42 GI Earthing with GI PipeSupply of Material for earthing with G.I. earth Pipe 2.5 meter long, 40mm dia including accessories and providing masonry enclosure etc. with charcoal/coke and salt as per IS3043/1987 revised upto date. TOTAL 61297553.67 0.0 0.0 TOTAL 61297553.67 INR Six Crore Twelve Lakh Ninety Seven Thousand Five Hundred & Fifty Three and Paise Sixty Seven Only SELECT BIDDER INPUT : EXCSS(+), LESS(-), ATPAR Legends of Unit of Mesurement Sr. No Short Text UOM Long Text UOM |
| 155 | P Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 24, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jun 25, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jun 29, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jun 25, 2026
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jun 29, 2026
18:00 IST
Corrigendum-4 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jun 25, 2026
18:00 IST
Corrigendum-5 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jul 02, 2026
18:00 IST
Corrigendum-6 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jul 24, 2026
18:00 IST
Corrigendum-7 Issued
Clarifications on tender conditions and amendments issued.
Completed
Aug 03, 2026
18:00 IST
Corrigendum-8 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 2 daysAug 03, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 2 daysAug 04, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 3 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender