Defence Statutory Bodies & Commissions/Committees Closing in 5 days TDR #55752833

Tender For Special Repairs To Certain Buildings At Dagshai Under Ge Kasauli

Issued by Statutory Bodies & Commissions/Committees · Dagshai, Himachal Pradesh
Tender Value
4.50 Crore
Estimated cost
Bid Submission
13 Jul 2026
5 days left
EMD
5.25 Lakhs
Bank guarantee accepted
Document Fee
2000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
Dagshai → Himachal Pradesh
EMD Exemption
Available
Quantity
Not Available

Project Description

Tender For Special Repairs To Certain Buildings At Dagshai Under Ge Kasauli

Corrigendum

Sr No Corrigendum Date Corrigendum Type New Submission Date
1 19-Jun-2026 CORRIGENDUM NO 01 Date 07-Jul-2026
2 29-Jun-2026 CORRIGENDUM NO 02 Date 13-Jul-2026
3 29-Jun-2026 CORRIGENDUM NO 02 BOQ 13-Jul-2026

BOQ

Name of Work:- SPECIAL REPAIRS TO CERTAIN BUILDINGS AT DAGSHAI UNDER GE KASAULI
Sl. No. Item Description
1Demolition of brick or stone masonary built in cement mortar including all quoins arches pillars, roof chimneys at height upto 15 mtr and similar work etc but excluding ashlars facing dressed stone work, precast concrete block etc. and removing debris/ rubbish etc out of MoD land, complete all as specified and as directed.
2Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern as in roof coverings, claddings in any position or slope upto 15.00 meter height, complete all as specified and as directed.
3Dismantling wrought iron, mild steel work (framed or unframed), hard drawn steel wire fabric etc of any description and in any position upto 15.00 meter height not otherwise provided for, complete all as specified and as directed.
4Taking down eaves gutters and rain water pipes (any size or pattern) including all fitting heads shoes bends swan necks etc, including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fitting and accessories), complete all as specifed and directed.
5Plain cement concrete (1:2:4), type B1 (using 20mm graded mechanically crushed stone aggregate) as in copings to stone masonary, roof kerbs or mud stops, rounded or chamfered on edges, cills, steps, seismic and other similar bands, plinths courses, parapets, bed plates, kerbs slightly rounded or chamfered angles and throating, fixing MS hold fast, filling gaps/spaces between wooden/ mild steel member embedded in stone/ brick masonry wall etc. at height upto 10.00 meter, complete all as specified and directed.
6Pre painted galvalume aluminium “zinc coating trapozoidal steel sheet 0.60mm (TCT) of approved colour having tensile strength of 550 MPa as in roof covering, cladding, in any position or slope upto 15.00 meter height, fixed with self tapping screws, complete all as specified and directed.
7Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.60mm (TCT) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws, complete all as specified and as directed.
8Bitumastic gola, with 80/25 bitumen and coarse sand mixture 1:3 by weight, 8cm x 8cm at the junction of roofing to vertical surfaces etc complete all as specified and as directed.
9Mild steel works for bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165, complete all as specified and directed.
10Plain mild steel sheeting 1.00 mm thick, in valley gutters, drip and straight flashings (length and girth as fixed ), ridges, hips, chimney flashings and similar work etc fixed as welded or soldered joints, reveting are provided etc at height upto 15 mtrs complete all as specified and directed.Note : Rates are included for providing nozzles, stop ends, drop ends made of mild steel sheeting 1.00 mm thick with necessary fixing arrangement/ jointing with rubber sealant for PVC downwater pipes, factory made profiling of flashings.
11160 mm dia PVC (SWR) pipes, single or double socketed, in any length with rubber ring joints fixed to wall including necessary heavy duty MS clamps, nuts & bolts, complete all as specified and as directed.
12160 mm dia PVC (SWR ) bends (with or without door), elbow etc. with rubber ring joints, fixed to wall, complete all as specified and as directed.
13Dismantling boarding or wooden planks, any description, fixed in any position or in any slope or height with nails or screws etc including fillets, complete all as specified and as directed. Please Enable Macros to View BoQ information SCHEDULE OF CREDIT Notes:-(a) The items and quantities given under in the respective columns are provisional; however, the rates inserted for credit are firm. The recovery for the credit shall be made for the actual quantities ordered and retrieved from the demolition/dismantling /taking down under respective items of BOQ. Contractor shall be permitted to remove the materials indicated in this credit schedule only after affecting the recovery for the same from the RAR/Final bill asapplicable and after written permission is obtained by the contractor from the Engineer-in-Charge. (b) Tenderers are advised to visit the site to ascertain the worth value, prevailing conditions of the existing materials for which credit is to be afforded. No claim whatsoever on account of above shall however be entertained at any stage whether the contractor (s) inspected the site or not. (c) The old materials obtained will not be allowed to be re-used in the work unless it is specifically mentioned in the description of relevant items of BOQ. All other serviceable/ salvage value materials obtained from the site other than those considered in this schedule shall be Govt. property and contrator’s quoted rates shall be deemed inclusive of removing such material to MES store yard of the Engineer-in-Charge, who will take such material on charge. In case of the dispute related to the interpretation of the provision with regard to the credit schedule, the decision of the Accepting Officer shall be final & binding. Ser No. Description of item A/U Qty Rate Amount REMARK
14Dismantling boarding or wooden planks, any description, fixed in any position or in any slope or height with nails or screws etc including fillets, complete all as specified and as directed. Please Enable Macros to View BoQ information SCHEDULE OF CREDIT Notes:-(a) The items and quantities given under in the respective columns are provisional; however, the rates inserted for credit are firm. The recovery for the credit shall be made for the actual quantities ordered and retrieved from the demolition/dismantling /taking down under respective items of BOQ. Contractor shall be permitted to remove the materials indicated in this credit schedule only after affecting the recovery for the same from the RAR/Final bill asapplicable and after written permission is obtained by the contractor from the Engineer-in-Charge. (b) Tenderers are advised to visit the site to ascertain the worth value, prevailing conditions of the existing materials for which credit is to be afforded. No claim whatsoever on account of above shall however be entertained at any stage whether the contractor (s) inspected the site or not. (c) The old materials obtained will not be allowed to be re-used in the work unless it is specifically mentioned in the description of relevant items of BOQ. All other serviceable/ salvage value materials obtained from the site other than those considered in this schedule shall be Govt. property and contrator’s quoted rates shall be deemed inclusive of removing such material to MES store yard of the Engineer-in-Charge, who will take such material on charge. In case of the dispute related to the interpretation of the provision with regard to the credit schedule, the decision of the Accepting Officer shall be final & binding. Ser No. Description of item A/U Qty Rate Amount REMARK
15Old unserviceable brick/ stone masonery
16Old unservicesable 0.63mm thick CGI Sheet
17Old unservicesable 0.63mm thick PGI Sheet
18Old unserviceable steel scrap
19Old unserviceable 0.80mm sheet gutter
20Old unserviceable false ceiling other than AC board any description any type
21Old unserviceable wooden boarding/ particle board/ weather boarding/ prelaminated PB of thickness over 30mm
22Old unserviceable wooden boarding/ particle board/ weather boarding/ prelaminated PB of thickness upto 25mm
23Old unserviceable timber scantling 40 sqcm and over in section
24Old unserviceable timber scantling under 40 sqcm in section
25Old unserviceable chowkhat with shutters n exc 1.5 sqm with any type of mongries
26Old unserviceable chowkhat with shutters exc 1.5 sqm but n exc 4 sqm with any type of mongery
27Old unserviceable shutter n exc 1 sqm with any type of mongery
28Old unserviceable shutter exc 1 sqm but n exc 2 sqm with any type of mongery
29Old unserviceable MS barrel tower bolt/butt hinges/handle of any size
30Old unserviceable MS sliding door bolt of any size
31Old unserviceable MS wire cloth (any description)
32Old unserviceable wooden boarding/ particle board/ weather boarding/ prelaminated PB of thickness upto 25mm
33Old unserviceable granite, Kota & marble any type and any thickness
34Old unserviceable PVC water tank of capacity exc 250 ltrs n exc 500 ltrs
35Old unserviceable PVC water tank of capacity exc 500 ltrs n exc 1000 ltrs
36Old unserviceable float valve including fitting 15/20mm
37Old unserviceable Gate valve 15mm bore
38Old unserviceable Gate valve 20mm bore
39Old U/S GI tubing 15mm bore
40Old U/S GI tubing 20m bore
41Old unserviceable CI pipe of dia 75mm
42Old unserviceable CI pipe of dia 100mm
43Old unservicable PVC bend/Tee/Junctio/trap of 75mm dia
44Old unservicable PVC bend/Tee/Junctio/trap of 110mm dia
45Old U/S 15 dia bib taps/stop cock/pillar tap of cast copper,CP
46Old unserviceable SS sink
47Old unserviceable wash basin including bracket
48Old unserviceable flushing cistern of any capacity
49Old unserviceable PVC connection of 15mm dia of any length
50Old unserviceable bevelled edge mirror
51Old unserviceable towel rail any description
52Old unserviceable soap dish
53Old aluminium scrap
54Old unserviceable air termination rod retrieved
55Old unserviceable test point terminal block any type any size
56Old unserviceable aluminium strip any type any size retrieved
57Old unserviceable GI strip any type any size retrieved
58Old unserviceable Earthing plate retrieved
59Old unserviceable GI tubing 40mm retrieved
60Old unsv point wiring Complete with accessories retrieved
61Old unsv submain wiring of any size retrieved
62Old unsv switches, sockets, switch socket combined,Bell/Bell Push lamp holders, ceiling roses etc retrieved
63Old unsv tube light /mirror light/security light/Bulk head light/ceiling light fittings retrieved
64Old unsv bulbs retrieved
65Old unsv DBs of any type retrieved
66Old unsv MCCB any type retrieved
67Old unsv MCB/Isolator any type any size
68Old unsv earthing material retrieved from
69Old Unsv Light Fittings of any type and model
70Old unsv LT cables of any size and type retrieved
71Old GI tubing of any size retrieved
72Old unsv HDPE pipe of any size retrieved Total 1252342.0 Signature of Contractor For Accepting officer

AI Tender Summary

OUR REF NO 55752833
AUTHORITY Statutory Bodies & Commissions/Committees
TENDER VALUE 4.50 Crore
LAST DATE 13-07-2026
Authority
Authority Name Military Engineer Services
Work Description Tender For Special Repairs To Certain Buildings At Dagshai Under Ge Kasauli
Basic Detail
Tender No CE CHZ/CHM/T-03/2026-27
Bidding Type Tender
Location
City Dagshai
State Himachal Pradesh
Key Dates
Publish Date 29 Jun 2026
Submission Date 13 Jul 2026
Open Date 15 Jul 2026
Finance
Tender Value 4.50 Crore
Tender Fee 2000
EMD 5.25 Lakhs
Exemption Available
Document List
44b3d683-e4c4-4dd1-85a1-c89f612a9dfb.html
Tendernotice_1 (2).pdf
BOQ_861036.xls
Tender.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Jun 29, 2026
11:30 IST

Tender Published

Tender notice published.

Completed
Jul 07, 2026
18:00 IST

Corrigendum-1 Issued

Clarifications on tender conditions and amendments issued.

Completed
Jul 13, 2026
18:00 IST

Corrigendum-2 Issued

Clarifications on tender conditions and amendments issued.

Upcoming · 5 days
Jul 13, 2026
18:00 IST

Corrigendum-3 Issued

Clarifications on tender conditions and amendments issued.

Upcoming · 5 days
Jul 13, 2026
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Upcoming · 5 days
Jul 15, 2026

Bid Opening Date

Technical bids will be opened and evaluated.

Upcoming · 7 days

Tender Documents

Download All (ZIP) ↓
html

44b3d683-e4c4-4dd1-85a1-c89f612a9dfb.html

pdf

Tendernotice_1 (2).pdf

xls

BOQ_861036.xls

pdf

Tender.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders