|
| 1 | Chair writing : Removing of the following old broken/unserviceable parts from the chair writing and S&F new parts made out of well seasoned 1st Class hard wood teak made to shpae and Size as per Drg complete all as specified and shown on Drg and as directed. |
| 2 | Front Leg |
| 3 | Rear Leg |
| 4 | Arm Rest |
| 5 | Removing of Old existing Cane and Supply and weaving cane 2mm wide, half round white colour and border shall be weaved with 4mm semi round cane of approved quality as per Godrej pattern, as per shape and size given in Drg complete all as pecified and directed |
| 6 | M& L for prepartion of old polished wooden surfaces by scraping and filling canties, if any with filler/putty to achieve even and smooth surface, Sand papered and applying two coats of readymade french polish of approved brand by GE to achieve glossy finish to the entire satisfaction complete all as pecified and directed |
| 7 | Chair Dining : Removing of the following old broken/unserviceable parts from the chair Dining and S&F new parts made out of well seasoned 1st Class hard wood teak made to shpae and Size as per Drg complete all as specified and shown on Drg and and as directed. |
| 8 | Front Leg |
| 9 | Rear Leg |
| 10 | Removing of Old existing Cane and Supply and weaving cane 2mm wide, half round white colour and border shall be weaved with 4mm semi round cane of approved quality as per Godrej pattern, as per shape and size given in Drg complete all as pecified and directed. |
| 11 | M& L for prepartion of old polished wooden surfaces by scraping and filling canties, if any with filler/putty to achieve even and smooth surface, Sand papered and applying two coats of readymade french polish of approved brand by GE to achieve glossy finish to the entire satisfaction complete all as pecified and directed. |
| 12 | Chair Easy : Removing of the following old broken/unserviceable parts from the Chair Easy and S&F new parts made out of well seasoned 1st Class hard wood teak made to shpae and Size as per Drg complete all as specified and shown on Drg and and as directed. |
| 13 | Front Leg |
| 14 | Rear Leg |
| 15 | Arm Rest |
| 16 | Removing of Old existing Cane and Supply and weaving cane 2mm wide, half round white colour and border shall be weaved with 4mm semi round cane of approved quality as per Godrej pattern, as per shape and size given in Drg complete all as pecified and directed. |
| 17 | M& L for prepartion of old polished wooden surfaces by scraping and filling canties, if any with filler/putty to achieve even and smooth surface, Sand papered and applying two coats of readymade french polish of approved brand by GE to achieve glossy finish to the entire satisfaction complete all as pecified and directed. |
| 18 | Bed Plywood Top : Removing of the following old broken/unserviceable parts from the Bed Plywood Top and S&F new parts made out of well seasoned 1st Class hard wood teak made to shpae and Size as per Drg complete all as specified and shown on Drg and as directed. |
| 19 | Removing of old unsv existing Plywood Top from the item and S&F new top made of 12mm thick plywood commercial exterior grade of relevant IS of shape and size as per Drg complete all as pecified and directed |
| 20 | Removing of old unsv existing unsv teak face plywood 4mm thick from the head board and S&F new 4 mm thick one side teak face on both side of head board with 4mm thick teak wood beading around the head board after repairing the complete head board as per shape and size given in the Drg complete all as pecified and directed. |
| 21 | Removing of old unsv existing unsv teak face plywood 4mm thick from the foot board and S&F new 4 mm thick one side teak face on both side of Foot board with 4mm thick teak wood beading around the Foot board after repairing the complete Foot board as per shape and size given in the Drg complete all as pecified and directed |
| 22 | M& L for prepartion of old polished wooden surfaces by scraping and filling canties, if any with filler/putty to achieve even and smooth surface, Sand papered and applying two coats of readymade french polish of approved brand by GE to achieve glossy finish to the entire satisfaction complete all as pecified and directed. |
| 23 | Table Centre : Removing of the following old broken/unserviceable parts from the Table Centre and S&F new parts made out of well seasoned 1st Class hard wood teak made to shape and Size as per Drg complete all as specified and shown on Drg and and as directed. |
| 24 | Removing of old unsv existing Top from the item and S&F new top made of 18mm Thick Prelaminated board exterior grade of relevant IS of shape and size as per Drg with 4mm teak wood edging all around edge should be polish complete all as pecified and directed. |
| 25 | M& L for prepartion of old polished wooden surfaces by scraping and filling canties, if any with filler/putty to achieve even and smooth surface, Sand papered and applying two coats of readymade french polish of approved brand by GE to achieve glossy finish to the entire satisfaction complete all as pecified and directed. |
| 26 | Table Peg : Removing of the following old broken/unserviceable parts from the Table Peg and S&F new parts made out of well seasoned 1st Class hard wood teak made to shape and Size as per Drg complete all as specified and shown on Drg and and as directed. |
| 27 | Removing of old unsv existing Top from the item and S&F new top made of 18mm Thick Prelaminated board exterior grade of relevant IS of shape and size as per Drg with 4mm teak wood edging all around edge should be polish complete all as pecified and directed. |
| 28 | M& L for prepartion of old polished wooden surfaces by scraping and filling canties, if any with filler/putty to achieve even and smooth surface, Sand papered and applying two coats of readymade french polish of approved brand by GE to achieve glossy finish to the entire satisfaction complete all as specified and directed |
| 29 | Teapoy : Removing of the following old broken/unserviceable parts from the Teapoy and S&F new parts made out of well seasoned 1st Class hard wood teak made to shape and Size as per Drg complete all as specified and shown on Drg and and as directed. |
| 30 | Removing of old unsv existing Top from the item and S&F new top made of 18mm Thick Prelaminated board exterior grade of relevant IS of shape and size as per Drg with 4mm teak wood edging all around edge should be polish complete all as pecified and directed. |
| 31 | M& L for prepartion of old polished wooden surfaces by scraping and filling canties, if any with filler/putty to achieve even and smooth surface, Sand papered and applying two coats of readymade french polish of approved brand by GE to achieve glossy finish to the entire satisfaction complete all as specified and directed. |
| 32 | Table Bed Side Size 450 x 450 x 500mm FD/E6/MAP/15(R) S&F of following parts of Table Peg including dismanting of old unserviceable parts without disturbing the other parts, made to shape & size as shown on drawing no FD/E6/MAP/15R complete all as pecified and directed |
| 33 | Top of 450x450 mm of pre laminated MDF board 18 mm thick, exterior grade with 4 mm thick Teak wood beading duly French polish of Asian/Bergered as per existing pattern complete all as pecified and directed |
| 34 | Sides of 450x450 mm of Pre laminated MDF board, 18 mm thick, exterior grade with 4 mm thick Teak wood beading duly French polish of Asian/Bergered complete as per existing complete all as pecified and directed. |
| 35 | Back 450x450 mm made out of 6 mm thick ply wood BWR Grade of as per existing complete all as pecified and directed. |
| 36 | Body drawer with telescopic channal of 350x450x450 mm made out of 18 mm thick Pre-laminated MDF board exterior grade finishing with PVC edging 1.5 mm thick as per existing complete all as pecified and directed. |
| 37 | Handle of 100 mm long chrome plated non ferrous mettal alloy as per existing complete all as pecified and directed. |
| 38 | PVC shoes superior quality complete all as pecified and directed |
| 39 | Removing an scratching of old paint and repainting the Table Bed Side completely with spray painting one coats of paint white synthetic enamel over a coat of primer all as specified and directed. |
| 40 | TABLE DRESSING LADIES WITH MIRRORS&F of follwing parts of table dressing ladies including dismantling of old unserviceable parts without disturbing the other parts, made to shape & size as shown on drawings,complete all as specified and directed. |
| 41 | 5mm thick mirror of 1220x366 mm shall be fixed along with suitable beading support and back ply 12mm of mirror complete all as pecified and directed. Make: Modiguard/Atul/Saint Gobbain. |
| 42 | Top shall be made of 18/19 mm thick prelaminated MDF Board of 980x380 mm (Make: Greenlam/Century/Kitply) ISI marked confirming to IS-14587 Grade-I,Type-II of shade as approved by GE. |
| 43 | Replacement of unserviceable drawers side with new drawer side of 18/19 mm thick Pre-laminated MDF board of 450x300x190 mm exterior grade and plywood top BWR grade ISI marked all as specified and shown in drg complete all as pecified and directed. |
| 44 | Bottom of 980x380 mm shall be made of 18/19 mm thick prelaminated MDF Board (Make: Greenlam/Century) ISI marked confirming to IS-14587 Grade-I,Type-II of shade as approved by GE. |
| 45 | Sides of 570x380 mm shall be made of 18/19 mm thick prelaminated MDF Board (Make: Greenlam/Century) ISI marked confirming to IS-14587 Grade-I,Type-II of shade as approved by GE. |
| 46 | Back of box of size 900x570 mm shall be 12mm thick plywood complete all as pecified and directed.(Make: Greenply/Century/Archid) of BWR Grade ISI Marked confirming to IS-303. |
| 47 | Replacement of unserviceable Handle of shutter of 100 mm with new Handle of good quality all as per drg complete and directed. |
| 48 | NOTE APPLICABLE FOR ALL ITEMS :- If rate quoted for similar/identical items in same part of Sch ‘A’ is at variance, the lowest rate quoted shall only be considered for payment to the contractor. Please Enable Macros to View BoQ information |
