Tender For Special Repair To Bldg No P-118 Under Age B/R-I Of Ge Saugor
Tender Value
47 Lakhs
Estimated cost
Bid Submission
18 Jul 2026
11 days left
EMD
94000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Saugor → Madhya Pradesh
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repair To Bldg No P-118 Under Age B/R-I Of Ge Saugor
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 12-Jun-2026 | Corrigendum No. 01 | Date | 27-Jun-2026 |
| 2 | 12-Jun-2026 | Corrigendum No. 01 | Date | 27-Jun-2026 |
| 3 | 19-Jun-2026 | Corrigendum No. 02 | Date | 04-Jul-2026 |
| 4 | 19-Jun-2026 | Corrigendum No. 02 | Date | 04-Jul-2026 |
| 5 | 25-Jun-2026 | Corrigendum No. 03 | Date | 11-Jul-2026 |
| 6 | 03-Jul-2026 | Corrigendum No. 04 | Date | 18-Jul-2026 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 2 | S&F roof trusses ( framed), trused, purlin, crane gantries, raills and fastenings and heavy braket framing (beams, tee, angle, channel or flat sections) including distance pices, cleats etc (welded/reviting) conforming to Fe 410-W (Gde-E250) quality 'A' complete all as specified and directed. |
| 3 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 4 | M&L for two coats of synthetic enamel paint over a coat of red oxide primer on steel surfaces over 10cm width or girth including preparation of new steel surfaces complete all as specified and directed. |
| 5 | Demolition of cement concrete (reinforced) below or above the ground floor, not exc 15cm thickness (reinforcement cut as required to faciliate demolition) such as in cooking platform, chajja etc complete all as specified and directed. |
| 6 | M&L for pre-cast Reinforced Cement Concrete 1:2:4, type B-1 (using 20mm graded stone aggregates) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces incl formwork, set in cement mortar 1:6 complete all as specified and directed. Note - Reinforcement shall be measured and paid seperately. |
| 7 | M&L for use & waste wooden form work to soffits of suspended flat slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (horizontal/ sloping), rough finished concrete surface, complete all as specified and directed. |
| 8 | M&L for mild steel TMT bars 10 mm dia and above cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed |
| 9 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles complete all as specified and directed |
| 10 | M&L for Brick work with sub- class ‘B’ old size bricks, straight or curved on plan exc 6m mean radius, built in cement mortar (1:6) complete all as specified and directed |
| 11 | M&L for Brickwork with sub- class ‘B’ old size bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar (1:4) complete all as specified and directed |
| 12 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed |
| 13 | M&L for rendering cement plaster, 10mm thick on fair faces of brick work or concrete surfaces of wall in cement mortar 1:6, finishing surfaces even and smooth without using extra cement complete all as specified and directed |
| 14 | M&L for rendering cement plaster, 15mm thick on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing on wall in cement mortar 1:4 with mixed with liquid integral water proofing compound @ 200ml/50 Kg cemnt weight, finished surface even and smooth without using extra cement complete all as specified and as directed. Note: - Water proofing compound shall be measured and paid for separately as 'Supply only'. |
| 15 | M&L for rendering cement plaster, 5mm thick on fair faces of brick work or concrete surfaces on ceilings in cement mortar 1:3 finished surface even and smooth without using extra cement complete all as specified and directed. |
| 16 | Supplying only liquid water proofing compound, ISI marked complete all as specified and directed. |
| 17 | M&L for two coats of cement base wall care putty in two coats @ 1Kg/Sqm (0.5Kg in each coat) on new plastered surface of wall/ceiling as preparatory work to painting including cleaning surface before application of putty and necessary rubbing of puttied surface with appropriate size of sand paper so as to make the surface truly smooth, free from all dirt/ dust and made ready to receive the finishing coat of paint complete all as specified and directed.Make : Birla white / JK putty/ Burger |
| 18 | M&L for complete removal of existing treatment and applying two coats of cement base wall care putty (approx thickness 1mm) on newly plastered surface of wall as preparatory work to painting including brooming down with steel wire brushes scraping down moulds moss and efflorescent salts and treating oil and greasy spots, removing of nails, making good holes , cracks etc cleaning surface before application of putty and necessary rubbing of puttied surface with appropriate size of sand paper so as to make the surface truly smooth, free from all dirt/ dust and ready to receive the finishing coat of paint complete all as specified and directed.Make : Birla white / JK putty/ Berger |
| 19 | M &L for applying three coats of white wash on newly plastered ceiling surfaces including preparation of these surfaces complete all as specified and directed. |
| 20 | M&L for two coat of acrylic interior emulsion paint over and including one coat of interior primer on prepared surfaces of wall complete all as specified and directedMake : Asian (Apcolite)/ Berger(self breath easy)/ Nerolac(nerolac Impression HD)Note : (i) The emulsion used shall be of approved colour by GE diluted as per manufacturer's instructions(ii) Contractor shall ensure washing floors, cleaning glass , joinery , electric fitting, etc after painting work with entire satisfaction of Engg-in-charge. |
| 21 | M&L for two coats of acrylic exterior emulsion paint over and including one coat of exterior primer on prepared surfaces of wall complete all as specified and directed.Make : Asian (Appex Altima)/ Berger(weather coat all Guard)/ Nerolac(Excel total)Note : (i) The emulsion used shall be of approved colour by GE diluted as per manufacturer's instructions(ii) Contractor shall ensure washing floors, cleaning glass , joinery , electric fitting, etc after painting work with entire satisfaction of Engg-in-charge. |
| 22 | M&L for applying two coats of white wash on old decorated ceiling surfaces including prepration of old surfaces complete all as specified and directed. |
| 23 | M&L for nonskid coloured ceramic tiles in floors, 7 to 8 mm thick, area of each tile exc 0.11 Sqm but not exc 0.18 sqm, set and jointed in neat cement slurry and pointed in white or coloured cement to match tile coiour/shade over and including 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 24 | M&L for glazed ceramic coloured tiles on vetical surfaces, 8 to 10mm thick, area of each tiles exceeding 0.36 sqm but not exceeding 1.60 sqm (square/ rectangular), fixed with costra tile adhesive cosmic silvwe type 1T (EN-STD C1TE) over and including 10mm thick rendering in CM 1:4 as beding layer complete all as specified and directed. |
| 25 | M&L for glazed ceramic coloured tiles in floors etc, 8 to 10mm thick, area of each tiles exc 0.36 sqm but n'exc1.60 sqm (square/ rectangular) tiles, set and jointed in neat cement slurry and pointed in white or coloured cement to match tile coiour/shade over and including 15mm thick screed bed layer in CM 1:6 complete all as specified and directed. |
| 26 | Demolition of concrete (unreinforced) in ground floors and pavings (below or above ground level), n exc 15cm thickness (below or above ground level) complete all as specified and directed. |
| 27 | M&L for 25mm thick PCC (1:2:4) type B-0 (using12.50mm graged stone aggregate) as in leveling course to sub base, finished surface rough to receive the tiles complete all as specified and directed. |
| 28 | M&L for PCC 1:4:8 type D-2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete complete all as specified and directed. |
| 29 | M&L for 75mm thick PCC 1:3:6 type C-2, (using 40mm graded stone aggregates) as in plinth protection finishing surface surface even and smooth without using extra cement including providing construction joint (at an interval not more than 3.0m) and filled with bitumen and sand mortar in 1:3 complete all as specified and directed. |
| 30 | S&F 80mm thick Machine pressed precast cement concrete coloured chemically treated rubber moulded interlocking paver block with grey cement and no pigment, any shape and size confirming to IS- 15658-2006 of M-40 grade, laid on 50mm thick sand cusion complete all as specified and directed.Note: The cost of sand cusion shall be deemed included in quoted unit rates. |
| 31 | M&L for Dismantling floor, hearth or wall tiling, including cement mortar bedding (but notbacking), any diacription including removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 32 | M&L for 16 to 18mm thick Granite slab of any shade (table rubbed and polished), machine cut for floor / shelves in steps, jambs, pillars, window cills & cooking plateforms laid over and including 15 mm thick cement mortor 1:4 bedding, pointing in white cement 1:2 using marble dust with admixture of pigment to match shade of the slabs, complete all as specified and directed |
| 33 | M&L for rounding to the edge of stone slabs one edges such as in steps, cooking plateform and other similar situations complete all as specified and as directed. |
| 34 | M&L for Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, girth not exc 10 cm complete all as specified and directed. |
| 35 | Taking down chowkhat or frame (without taking off shutter from the frame), area of opening n'exc 1.5 Sqm each, removing from the site complete all as specified and directed.Note:- In order to facilitate the taking down of chowkhat or frame with holdfasts, the cost of cutting holes or dismantling of brick/stone/concrete masonry work of any description in Jambs of existing opening or removing any other fixing arrangement and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, type B-1 as required so as to re-fix the holdfasts of new chowkhat or frame shall deemed included in quoted unit rates.(ii) Hold fast / fasteners shall be measured and paid separately in respective item hereunder. |
| 36 | S&F factory made solid PVC Door Frame of size 50mm x 47mm made out of 5mm single sideprelam colour PVC sheet, reinforced with M.S. Square tube including painting edges to match with prelam sheet, fxed in opening as per specification & drawing complete all as specified and directed. |
| 37 | S&F Factory made 30mm thick (stiles), Solid PVC Moulded Door Shutter with wood free EPS, with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, fixed in frame at site as per specification & drawing complete all as specified and directed. |
| 38 | S&F Factory made uPVG white colour Sliding window(area not exceeding 2.00 sqm each), Three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware.EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. complete all as specified and directed.Note : Net Opening will be measured lor payment purpose.) |
| 39 | Taking down chowkhat or frame (without taking off shutter from the frame), area of opening exc 1.5 sqm and n'exc 4.00 sqm each, removing from the site complete all as specified and directed.Note:- In order to facilitate the taking down of chowkhat or frame with holdfasts, the cost of cutting holes or dismantling of brick/stone/concrete masonry work of any description in Jambs of existing opening or removing any other fixing arrangement and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, type B-1 as required so as to re-fix the holdfasts of new chowkhat or frame shall deemed included in quoted unit rates.(ii) Hold fast / fasteners shall be measured and paid separately in respective item hereunder |
| 40 | S&F 105 mm X 60 mm size pressed steel frames for door with one or more rebates including necessary lugs, hinges, lock strike plate etc, one shop coat of red oxide primer, filing PCC (1:3:6), type C-0 (using 12.5 mm graded store aggregate) in hollow portion of frame and two coat of synthetic enamel paint after preparation of primed surface complete all as specified and directed.Note: The cost of lugs, hinges, lock strike plate etc, shop coat, synthetic enamel paint and PCC filling work shall be deemed included in quoted unit rates. |
| 41 | Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and as directed. |
| 42 | S&F 35mm thick factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and as directed.Note: stainless steel butt hinges and necessary S.S screws shall be paid separately. |
| 43 | S&F 1st class hardwood small fitting such as brackets of any type, latch and hinge blocks, shaped door stopper, shaped door and window stops and the like, including all necessary' labours; articles n- exc 200 cu. cm each complete all as specified and asdirected |
| 44 | S&Falluminium wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.45mm and fixed with stainless steel staples complete all as specified and directed. |
| 45 | M&L for repair of RCC structure like slab, beam, colomn, chajja, paprapit, landing etc in following steps complete all as specified and directed:-Step 1 : scrapping, cutting, chiseling, derusting and clearing exposed reinforcement, surfaces of damages, loose RCC surfaces and applying one coat of rust remover by brushing to rusted reinforcement to remove loose rust particles and allow to dry it for 2 to 3 hrsStep 2 : insert / fix new reinforcement to damaged portion by drilling holes at required distance, fill the epoxy into the all holes and insert the reinforcement in the hole and binding the reinforcement at rusted portion of reinforcement.Step 3 : applying cement slurry at entire damaged area and plaster the surface with cement and sand mortar 1:3 mixed with polyner liquid @ 15% of cement weight and water as required, mixing properly and plaster the surface inished even and smooth by making the edge water dropping groves Note - Cost of formwork/ scafolding and polyner liquid shall be deemed included in quoted unit rate. |
| 46 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around theopening, all complete as per requirement and direction of Engineer in-charge. |
| 47 | S&F 3mm thick sheet glass ordinary quality and glazing with oil putty in square, nexc 0.5 sqm in each pane complete all as specified and as directed.. |
| 48 | S&F100mm long stainless steel butt hinges, 303 grade, heavy-duty, corrosion-resistant (rust preventive), polished / Bright (e.g., #8 Mirror Finish), fixed with stainless steel screws complete all as specified and directed. |
| 49 | S&F 200mm long stainless steel barrel tower bolt, 303 grade, heavy-duty, corrosion-resistant (rust preventive), polished / Bright (e.g., #8 Mirror Finish), fixed with stainless steel screws complete all as specified and directed. |
| 50 | S&F 150mm size stainless steel handle, 303 grade, heavy-duty, corrosion-resistant (rust preventive), polished / Bright (e.g., #8 Mirror Finish), fixed with stainless steel screws complete all as specified and directed. |
| 51 | S&F 300mm long stainless steel, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, 303 grade, heavy-duty, corrosion-resistant (rust preventive), polished / Bright (e.g., #8 Mirror Finish), fixed with stainless steel nut & bolts and fixed complete all as specified and directed. |
| 52 | M&L for water proofing roof treatment to accessible RCC roof with approved modified membrane (MHMDPE film type) of weighing not less than 3 kg/sqm comprising the following items and all as specified:-(i) The surface of roof, parapet and gutters drain mouths etc over which water proofing treatment is to be applied shall be cleaned of all foreign matter such as fungus, mass dust etc by wire brushing and dusting. For cast iron drain outlets a groove shall be cut as specified and directed.(ii).Oil based Bitumen primer conforming to IS-3384-1986 @ 0.3 kgs per sqm to be applied on prepared surface till the surface is properly impregnated.(iii).Applying one coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqm (iv).Laying of APP membrane with side laps 75 mm ^ end lap 100 mm as per manufacture instruction etc.(v).Applying one coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqm over the membrane (vi) A fillet of PCC (1:2:4) of 100x100mm shall be provided at all junctions of vertical and horizontal surfaces and wherever there is a change of direction. The membrane should not be taken over at any steep turns and hence all corners/timers should be rounded.Note : For technical specification/ properties of APP membrane, workmanship and application process related clause in Particular specification shall be referred. |
| 53 | M&L rendering 10mm thick in cement mortar 1:4 mixed with and including liquid water proofing compound @ 200ml per 50 kg bag of cement applied over roof slab ,complete all as specified and directed.Note : Water roofing compound shall be measured and paid separately in respective item of this BOQ |
| 54 | S&F in repair PVC Wall Lining consisting of 25mm thick lnsulated PVC Panels having expanded polystyrene (EPS) stuck to 2mm thick with wood grain printed PVC sheet duly fitted on PVC frame made of 35x5mm PVC fillets fixed properly in to wall as per manufactureor's instructions and all other assessories required to complete the job as per specifications, drawing, manufaccturer's instructions to th e entire setisfection of Engr-in-Charge. |
| 55 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed |
| 56 | M&L for Putty/POP work in multi layer (total thicknes not less than 10mm) as in plaster of Paris (gypsum board) false ceiling of any shape (Square/Circular/Semi circular etc), design and pattern as approved by Engr-in-Charge including required GI frame work and Fibre mesh/ reinforcement (Horizontal & Vertical) fixed properly with walls/ceiling as per manufacturer's instructions, finishing Putty/POP surface even and smooth, painting two or more coat with Premium quality plastic emulsion paint over one coat primer over smooth finish POP surface, making provn for spot lighting/ceiling light as required and all other accessaries/fixture/ material required to complete the job in all respect as specified and directed by Engr-in-Charge.Note : (i) The work may be exicuted up to a height of 5.00 m above floor level.(ii) light fittings and wiring work shall be measured and paid seperatly. |
| 57 | S&F fixed type ventilators aluminium powder coated of frame size 50.80X 25.40mm,1.5 mm thick half portion will be fixed with 4mm thick frosted glass and half portion will be fixed with louvers with 4mm thick frosted glass with rubber gasket and aluminium beading ,aluminium wire mess 0.36 mm dia and width of aperture 1.45mm to be fixed over louvers portion only including necessary cutting holes on wall and fixing arrangements complete all as specified and directed.Note : Aluminium section(s) thickness shall not be not less than 1.50 mm. |
| 58 | S&F 12 mm thick toughened as in glass partition / Fixed glass/ door (shutter ) with hydraulic floor spring and top pivot and with set of new SS hydraulic floor spring & top pivot sufficient to operate for the glass doors with weight of 120-150 Kg incl cutting to shape, drilling holes required incl figured/ frosted glass film of required pattern/ logo/ shape on one side and incl fixing on Aluminium / WPC Frame (As per site requirement) incl all required accessories rubber beading, silicon, SS Handle 600mm Long of required design and shape etc Colour as approved by engr-in-Charge Complete all as specified and directed. |
| 59 | S&F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed. |
| 60 | S&F in repair 25mm dia stainless steel (202 Grade) curtain rod not less than 0.70mm thick with decorative end caps (Latoo) and brackets complete all as specified and directed.Note : In openings exceeding 1.2m wide, additional brackets shall be provided so as the distance between two consecutive brackets shall not exceed 1.2m. |
| 61 | S&F rotational moulded poly-ethylene water storage tanks (cylindrical vertical with closed top), 1000 litres capacity, triple layer in construction white in colour hoisted and fixed in position including 20mm PTMT float valve assembly including accessories and dismantling of old tank ( any description and capacity) complete all as specified and directed.Make : Sintex / Supreme(Siltank) / Plasto |
| 62 | Taking down of old damaged roof treatment of any description including mud phushka, lime, concrete, tiles, cement plaster, padding from roof surfaces (total thickness n;exc30cm), preparing roof, parapet and gutters, drain mouth etc cleaning by brooming, brushing and watering to make the surface free from all foreign matters such as fungi, moss, dust etc and throw the same to a distance beyond MOD land or as directed by Engineer-in-charge complete all as specified and directed.Note : The work may be ordered in three story buildings. |
| 63 | S&F in repairs of 75mm dia PVC (SWR) multi floor trap with Hinge type SS grating including jointing with solvent cement complete all as specified and directed.. |
| 64 | S&F in repairs 20mm dia bore Gun metal, Globe or gate valves, with iron head or lever screwed both ends for iron pipe complete all as specified and directed. |
| 65 | M&L for GI tubing 15 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors including taking down existing tubing of any description complete all as specified and directedNote : Cutting chases and making good shall be measured and paid separately under respective item here-in-after. |
| 66 | M&L for GI tubing 20 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors including taking down existing tubing of any description complete all as specified and directedNote : Cutting chases and making good shall be measured and paid separately under respective item here-in-after. |
| 67 | S&F Antique Copper Towel Rack 600mm long with Lower Hangers, Stainless Steel including taking down existing towel rod/rack of any description, complete all as specified and directed.Make : Jaquar- ( Cat Part No AKP-ACR-35781)PS or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 68 | S&F in repair purposely moulded looking mirror 5mm thick glass fixed with studs complete all as specified and directed.Make : Saint-Goblin/Modi Guard/Asahi India (AIS) |
| 69 | S&F Vitreous china white Rimless Blind Installation Wall Hung WC With UF Soft Close Slim Seat Cover, Hinges And Accessories Set, Single Piece Slim Concealed Cistern Body With Installation Kit and Control Plate (Blush Gold Bright PVD), ‘P’ or ‘S’ traps, fixing as per manufacture's instructions making all connections (to trap and to cistern) including dismantling / taking down existing WC, cistern etc of any description, complete all as specified and directed.Make : Jaguar {(EWC-Cat Part No SLS-WHT-6953BIUFSMN), (Control plate -JCP-BGP-352415PD) & (Cistern-JCS-WHT-2400)} or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 70 | S&F in repair Thin Rim Table top wash hand basin, white, round in shape with 32 mm size full thread 130 mm in height Click clack waste (Blush Gold Bright PVD) and Single Lever Basin Mixer without Popup Waste with 450mm Long Braided Hoses incl fixing on platform with all required accessories/ fixtures complete in all respect as specified and directed.Make : Jaguar {(WHB-SLS-WHT-6905), (waste -ALD-BGP-727L130) & (Basin mixer-KUP-BGP-35011BPM)} or equivalent of Kohler/Hans Grohe/ Villeroy and boch |
| 71 | S&F Vitreous China half stall type Urinal With Spreader And Fixing Accessories Set, fixing plugs, bedding urinal on wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed. Make : Jaquar Code: ALD-BGP-769L300X190 or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 72 | S&F in repair Bottle Trap with 300mm & 190mm Long Wall Connection Pipes- Blush Gold Bright PVD for wash basins/urinals with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed in all respect complete all as specified and directed. Make : Jaquar Code: ALD-BGP-769L300X190 or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 73 | S&F BIB COCK WITH WALL FLANGE ( BLUSH GOLD PVD - KUBIX PRIME RANGE), Long Body With Wall Flange including taking down existing towel rod/rack of any description, complete all as specified and directed.Make : Jaquar- ( Cat Part No SKU: KUP-BGP-35037PM) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 74 | S&F in repair 15mm dia SS-304 Heavy Duty Connection Pipe for Wash Basin, Geyser, Hot & Cold Water, Basin Mixer | Leak Proof Flexible Tap Connector Pipe | Rust Free, Durable, Long Life ,,450 mm long, complete all as specified and directed. |
| 75 | S&F 15mm bore 2 Way Bib Cock with Wall Flange (Blush Gold Bright PVD) including taking down existing tap of any description, complete all as specified and directed.Make : Jaquar- ( Cat Part No KUP-BGP-35041PM) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 76 | S&F in repair 15mm bore dia single lever basin mixer wall mounted consisting of operating lever, cartridge sleeve, nipple & spout, including all required accessories/ fixture complete in all as specified and directed.Make : Jaquar Code: KUP-BGP-35233NKPM / Cera Code : F1021474RG / Kohler Code : K-73061T-7-RGD |
| 77 | S&F Hand Shower (Health Faucet)- Blush Gold Bright PVD with 8mm Dia, 1 Meter Long Flexible Tube & Wall Hook including taking down existing towel rod/rack of any description, complete all as specified and directed.Make : Jaquar- ALD-BGP-573PD or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 78 | S&F 15mm bore Angular stop cock with Wall Flange (BLUSH GOLD PVD) including taking down existing tap of any description, complete all as specified and directed.Make : Jaquar- ( Cat Part No KUP-BGP-35053PM) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 79 | S&F 15mm bore Exposed part kit concealed stop cock with Wall Flange (BLUSH GOLD PVD) with regular body of concealed stop cock including taking down existing tap of any description, complete all as specified and directed.Make : Jaquar- (Cat Part No KUP-BGP-35083KPM & Cat part : ALD-CHR-083R) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 80 | S&F Toilet Roll Holder with Stainless Steel Flap-Blush Gold Bright PVD including taking down existing towel rod/rack of any description, complete all as specified and directed.Make : Jaquar- AKP-BGP-35753PS or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 81 | S&F Towel Ring Square Antique Copper Towel Rack 600mm long with Lower Hangers, Stainless Steel including taking down existing towel rod/rack of any description, complete all as specified and directed.Make : Jaquar- ( Cat Part No AKP-BGP-35721P) or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 82 | S&F Soap Dispenser with glass bottle-Blush Gold Bright PVD complete in all respect complete as specified and directed by Engr-in-Charge. Make : Jaquar Code: AKP-BGP-35735PPD or equivalent in Kohler/Hans Grohe/ Villeroy and boch |
| 83 | S&F in repair 110mm dia PVC(SWR) vent cowl, complete all as specified and directed. |
| 84 | S&F in repairs 110mm dia PVC (SWR) pipes single soketed in any length with rubber ring jointed laid in trenches or in floors omplete all as specified and directed. |
| 85 | S&F in repairs 75mm dia PVC (SWR) pipes single soketed in any length with rubber ring jointed laid in trenches or in floors complete all as specified and directed. |
| 86 | S&F PVC (SWR) bends, 110 mm bore dia with access door complete all as specified and directed. |
| 87 | S&F PVC (SWR) bends, 75 mm bore dia complete all as specified and directed. |
| 88 | S&F 110mm dia PVC(SWR) junction, single (single T/Y ) equal or unequal any radius , with access door, complete all as specified and directed. |
| 89 | S&F 75 mm dia PVC(SWR) junction, single (single T/Y ) equal or unequal any radious. with access door, complete all as specified and directed. |
| 90 | Taking down carefully copper/aluminium point wiring (light fan, socket or power) complete including fittings such as switches, sockets, c/roses, lamp holders, tube light fittings, sketch fittings, wooden boards, bell push, call bell, MCBs & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall/floor etc complete all as specified and directed. |
| 91 | Taking down main switch, DB/Change over/VTPN, AC box from wall/ wooden board etc , any description and any capacity with MCB(s) / MCCB(s) including disconnection of electric connections complete all as specified and directed |
| 92 | M&L for concealed point wiring for one light point or fan/exhaust point controlled by one switch with 1.5 Sqmm PVC insulated FRLSH, unsheathed, copper conductor (stranded) 1100 volt wiring cable in & including ISI marked PVC conduit of size not less than 20mm, ivory/white in colour with all accessories (such as tee, bend, joint cover etc) including suitable size modular metal boxes with cover plate along with frame for mounting of switches/sockets/ regulator etc and continuous earth lead cable wire of similar description of wiring cable complete all as specified and directed. Note:-(i) Wiring cable shall be provided using colour coding such as Phase - Red, Neutral – Black, and Earth – Green or as approved by Engr-in-charge .(ii) Cutting, chasing in walls (brick or stone) shall be measured and paid separately under respective item here-in-before. |
| 93 | All as per item No. 92 above but point wiring for one 5 Amp socket point on independent board controlled by one switch and with 2.5 Sqmm wiring cable. |
| 94 | All as per item No. 92 above but point wiring for one 3 pin ,5 Amp socket point on the same board with other switch and 2.5sqmm wiring cable. |
| 95 | All as per item No. 92 above but point wiring for 15/16A socket outlet with 2.5 Sqmm wiring cable. |
| 96 | S&F Modular switch, one way, 5/6 Amp 230, 1 module complete all as specified and directed. |
| 97 | S&F Modular socket outlet, 5/6 Amp-2/3 pin combined, 2 module complete all as specified and directed. |
| 98 | S&F switch Modular, single pole, one way,15/16 Amp ,1 module 230 Volt complete all as specified and directed. |
| 99 | S&F socket outlet modular 15/16 Amp, 5/6 pin combined ,2 module 230 Volt complete all as specified and directed. |
| 100 | S&F ceiling rose, surface backlite, three terminal complete all as specified and directed. |
| 101 | S&F modular lamp holder insulated with back plate suitable for Angle/Batten fitting complete all as specified and directed. |
| 102 | S&F modular fan step regulator 60/80W, 2 module complete all as specified and directed. |
| 103 | S&F Tube light fitting 20/18 watt for surface and wall mounted LED batten with ultra slim polycarbonate LED lighting fixture with high lumen output environmental friendly energy efficient complete all as specified and directedMake : Havells - Cat no LHEXAPP7PN1W020/ Bajaj - Beam Pro Batten 830412/ Philips -Ujjwal/ slimline Batten 919515814053 / Orient - LBLN -18-C-SQ |
| 104 | S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver, holder & connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.Make : Havells - cat no RUGBYGENXFTS10WLED865SSYMBOPC / Bajaj - BIBWP10WLED/ Orient - LIBHP-10-C |
| 105 | S&F LED bulb 9/10 watt suitable for angle / batten holder fitting complete all as specified and directed.Make\\" havells/ Philips/Bajaj |
| 106 | Disconnection all electric connections and taking down carefully existing ceiling fan (any description and size and capacity), desmantling blades and deposited to AGE E/M store yard complete all as specified and directed. |
| 107 | S&F ceiling fans with brushless direct current motor (BLDC),1200 mm sweep, 230 V, 5 star rated, having minimum air delivery 210 CFM with service value 6.00 BEE along with remote control, canopy, down road (not les than 250mm), hanging clip, rubber real, nut bold and washer, locking pin, connecting cable etc) including taking down existing ceiling fans of any description, type a and size including disconnection of electric connections and deposited to AGE E/M store yard complete all as specified and directed.Make : Havells Modle-Festiva Prime BLDC / Crompton: Model-Energion Groove Regulator/ equivalent make in bajaj / philips |
| 108 | S&F in repair exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 250MM including taking down existing exhaust fans of any description, type a and size including disconnection of electric connections and deposited to AGE E/M store yard complete all as specified and directed.Make : Havells Model -Thrill Air DX HS / Crompton: model- BRISK AIR NEO /equivalent make in bajaj / philips |
| 109 | S&F in repair 2' X 2' ultra slip recess mounted luminaire with high brightness 36 Watt LED package and Unique pattern acrylic de-glaring diffuser sheet for glare-free uniform light distribution suitable for armstrong/grid ceiling complete all as specified and directed. Make : Havells - cat no. PLANO2X2PLR36WLED840S or equvalent of Bajaj / Philips / CROMPTON |
| 110 | M&L concealed sub main wiring with two single core 6.0 Sqmm PVC FRLSH insulated unsheathed stranded copper cable (Phase & neutral) and one single core cable of same description as continuous earth wire, drawn in & incl medium grade, ISI marked PVC conduit of suitable size (not less than 20mm dia) with all accessories (such as tee, bend, joint cover, round / square blocks at junctions as required) complete all as specified and directed.Note: (i) The cost of cutting chaging pinning for concealed PVC conduit, making good in CM 1:3 and painting so as to match with the adjoining existing surface finish shall be measured and paid separately under respective item of BOQ in this contract)(ii) Proper colour coding of wiring cables (as approved by Engg-in-charge) shall be used/ ensured(iii) Two runs of single core cable (Phase and neutral) and one run of single core cable (earth continuity conductor) & one run of PVC casing -n-caping/pvc conduit shall be measured as one unit length. |
| 111 | S&F in replair modular sheet metal enclosure with socket plug top, single pole and neutral enclosure with two pin and earth plug and socket, and one No MCB, SP, 20 Amps, 230 Volts, 10KA 'C' series, flush mounting complete complete all as specified and directed. |
| 112 | S&F MCB SP 240 volt 6 Amp to 32 Amp 10 KA capacity having C-curve characteristics complete all as specified and directed. |
| 113 | S&F MCB SPN 240 volt 40 Amp 10 KA capacity having C-curve characteristics complete all as specified and directed. |
| 114 | S&F MCB SP 240 volt 63 Amp 10 KA capacity having C-curve characteristics complete all as specified and directed. |
| 115 | S&F sheet metal enclosure distribution board (DB) double door, IP-43, SPN, 12 way, 240 V with 120-160 Amps rated bus bar of suitable size, including taking down existing DB with MCB and bus bars complete all as specified and as directed. Please Enable Macros to View BoQ information |
| 116 | S&F sheet metal enclosure distribution board (DB) double door, IP-43, SPN, 12 way, 240 V with 120-160 Amps rated bus bar of suitable size, including taking down existing DB with MCB and bus bars complete all as specified and as directed. Please Enable Macros to View BoQ information |
AI Tender Summary
Tender Timeline
Jul 03, 2026
11:30 IST
Tender Published
Tender notice published.
Completed
Jun 27, 2026
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jun 27, 2026
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jul 04, 2026
18:00 IST
Corrigendum-3 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jul 04, 2026
18:00 IST
Corrigendum-4 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jul 11, 2026
18:00 IST
Corrigendum-5 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 4 days
Jul 18, 2026
18:00 IST
Corrigendum-6 Issued
Clarifications on tender conditions and amendments issued.
Upcoming · 11 daysJul 18, 2026
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
Upcoming · 11 daysJul 20, 2026
Bid Opening Date
Technical bids will be opened and evaluated.
Upcoming · 13 daysTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender