|
| 1 | (A) Removal of following unserviceable parts of existing furniture items of various MES F/DB/FD/MAP drgs carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, screwing, weldging, glueint, providing hinges, denting applying putty for levelled surface, placing every part in-tact and painting/polishing the disturbed portion, as applicable as per drgs, all as specified and directed by Engr-in-Charge.(B) Work will be executed where the furniture exist in JCOS/ OR Md Accn of GE(West) including BSO'S Furniture Yard all as specified and directed by Engr-in-Charge. |
| 2 | Charpoy Steel (MAP): Drg No FD/MAP-II/01: Removing the existing unserviceable part and S&F following similar new part as per Drg and as directed by Engr-in-Charge. |
| 3 | Stiffener |
| 4 | Long rail |
| 5 | Short Rail |
| 6 | Plywood and nut & bolt with washers for plywood |
| 7 | Hard Rubber Shoe |
| 8 | Preparing steel surface and applying two coats of Anti Rust PU eanmel paints over one coat of primer including scrapping old paints and applying putty to steel surfaces in the furniture (Charpoy steel MAP) as per Drg No - FD/MAP-II/01. |
| 9 | Charpoy GI Pipe FD-220/Similar pattern: Removing the existing unserviceable part and S&F following similar new part as per Drg and as directed by Engr-in-Charge. |
| 10 | Removing the exisiting all unsv ply wood from frame of charpoy, tightening/refixing the serviceable loose parts of frame supply & fixing 1948 mm long x 912 mm wide single piece fresh new plywood 12mm thick BWP Grade 1 along with flush/ countersunk bolt (06 nos in Qty) of dia 10mm, length 50mm and bolt top must be flat and of dia 25mm Each bolt must be consist of two cup washers & one nut, Hole on ply for fixing bolt must be made at a distance of two inch from centre of long rail and two coats of paint emanl of furniture Paint. |
| 11 | MS Cleats of size 60 mm x 30 mm x 5 mm |
| 12 | MS angles of 25 mmx 25 mm having 5 mm |
| 13 | Long rail |
| 14 | Short rail |
| 15 | Elbow |
| 16 | Check nut |
| 17 | Hard Rubber Shoe |
| 18 | Preparing steel/ GI surface and applying two coats of Anti rust PU enamel paints over one coat of primer including scrapping old paint, sanding in the furniture (Carpoy GI Pipe) as per drawing No FD 220/ Similar pattern. |
| 19 | Chair Verandah FD 250/19/259/ 333/356: Removing the existing unserviceable part and S&F following similar new part as per Drg and as directed by Engr-in-Charge. |
| 20 | Canning of Seat |
| 21 | Canning of Back |
| 22 | Rubber Shoe |
| 23 | M&L for running welding (not exc 1 inch) of steel items including scraping, preparing surface of welded portion, grinding all as specified and as directed. |
| 24 | M&L for Painting of all steel surfaces by coating white paint after rusting/ grinding the steel surfaces of chair Verandah. |
| 25 | Rack Shoe FD |FD/EG/MAP/02(R) : Removing the existing unserviceable part and S&F following similar new part as per Drg and as directed by Engr-in-Charge. |
| 26 | Shelves |
| 27 | M&L for running welding (not exc 1 inch) of steel items including scraping, preparing surface of welded portion, grinding all as specified and as directed. |
| 28 | M&L for Painting of all steel surfaces by coating black paint after rusting/ grinding the steel surfaces of Rack Shoe. |
| 29 | Table Dining Steel 3' x 3' FD 1009: Removing the existing unserviceable part and S&F following similar new part as per Drg and as directed by Engr-in-Charge. |
| 30 | Table Top along with teak wood beading |
| 31 | Top Long Rail |
| 32 | Top Short Rail |
| 33 | Hard rubber Shoe |
| 34 | M&L for running welding (not exc 1 inch) of steel items including scraping, preparing surface of welded portion, grinding all as specified and as directed. |
| 35 | M&L for Painting of all steel surfaces by coating paint as colour approved by GE after rusting/ grinding the steel surfaces of Table Dining Steel 3' x 3'. |
| 36 | CHAIR SCHOOL WITH HAND BOARD |
| 37 | Removal of unsv / broken Top of the chair with iron streep and S&F New top of size 585mmx 300mm made up of 18mm thick plywood BWP Gde A IS: 710 and laminated sheet of approved shade and 4mm with teak wood beading with semi round shape all round the top of table. |
| 38 | Removal of unsv / broken seat & back of the chair and S&F New one piece PVC seat & back as shown on drg. |
| 39 | Removing existing unserviceble rubber shoes and replace with new 25mm dia hard rubber shoe for legs as approved by Engg-in-Charge. |
| 40 | M&L for Preparation of old painted steel surfaces of chair school with hand board by removing all dents, filling with putty and spray painting with 2 coats of white synthetic enamel paint. |
| 41 | Table Computer (FD /E6/MAP/03): Removing the existing unserviceable part and S&F following similar new part as per Drg and as directed by Engr-in-Charge. |
| 42 | Table Top |
| 43 | Legs with Nylon Buffers |
| 44 | Drawer with Telescopic Channels |
| 45 | Key Board Tray with Telescopic Channels |
| 46 | Wood Beading |
| 47 | Pre-laminated particle Board Shelf |
| 48 | Pre-laminated particle Board Mouse Tray with Telescopic Channels |
| 49 | Pre-laminated particle Board Bottom Shelf |
| 50 | Pre-laminated particle board Verticals |
| 51 | 25 mm thick square MS Pipe |
| 52 | 25 x 50 mm MS Rect MS Pipe |
| 53 | M&L for running welding (not exc 1 inch) of steel items including scraping, preparing surface of welded portion, grinding all as specified and as directed. |
| 54 | M&L for Painting of all steel surfaces by coating black paint after rusting/ grinding the steel surfaces of Table computer and laminited part shall be french polished till to achive glossy finish to Table Computer. Please Enable Macros to View BoQ information |
