|
| 1 | Contract Details |
| 2 | (i) Sr Executive Medium Back Chair (Steel) (TP) M & L for taking out oldbroken/unserviceable of back portion providing S&F new cushion of 32 density cool foam of Sr Executive Medium Back Chair (Stee) 24\\"x30\\" and frame with plastic/Rubber Strip with 2\\" screw complete all as specifed and directed. |
| 3 | (ii) All as per item No 1 (i), above M & L for taking out old broken/unserviceable and S&F for providing new cushion of 32 density cool foam base of seat of Sr Executive Medium Back Chair (Stee) 18\\"x24\\" base frame complete all as specifed and directed. |
| 4 | (iii) All as per item No 1 (i) M & L for providing new tapestry cloth cover for seat foam and back foam of Sr Executive Medium Back Chair (Stee) of approved shade & quality to cover the of Size 24\\"x30\\" of back portion and 18\\"x24\\" thick portion of seat cost of tapestry cloth shall not be less than Rs 260.00 per running meter. |
| 5 | (iv) All as per item No 1 (i) above Sr Executive Medium Back Chair (Steei) Wheel 60 mm dia Castors complete all as specfied and directed. |
| 6 | (v) All as per item No 1 (i) above S & F new steel five star base fitted base as per trade pattern complete all as specified and directed |
| 7 | (vi) All as per item No 1 (i) above S&F new hand rest handle of black integral skin polyure them reinforced with M S insert with arms complete all as specified and directed. |
| 8 | (vii) All as per item No 1 (i) above S&F new lifting Hydralic system of suitable size and design as per original pattern with pushing handle nut/bolt with washer complete all as specfied and directed. |
| 9 | (viii) All as per item No 1 (i) above S&F new back ith 12 mm thick plywood back portion and seat base size 18\\"x30\\" and 18\\"x24\\"(Make BWR Ply : Archidlam/Centary), complete all as specfied and directed. |
| 10 | Steel Book Shelf of Size 1980x840x300mm (TP) :- (i) M & L for taking out old broken/unserviceable of four compartments each fitted with top hung and S&F providing new compartment for each with screw complete all as specifed and directed. (Make Hettich, Godraj) |
| 11 | (ii) All as per item No 9 (i) above S&F new fitted in 4 compartments is glass 6mm thick all as specified directed. (Make Hettich, Godraj). |
| 12 | (iii) All as per item No 9 (i) above S&F new fitted in lock 6 lever with duplicate keys 4 compartments 04x lock is steel book case, (Make of Lock Harison or Godrej) all as specified directed. |
| 13 | (iv) All as per item No 9 (i) above S&F new fitted in Handle steel 100 mm 4 compartments 04x handle is steel book case, (Make of handle Harison or Godrej) all as specified directed. |
| 14 | (v) All as per item No 9 (i) above S&F new fitted in Leg of 1.25mm thick mild steel sheet duly gas welded/riveted all as specified directed. |
| 15 | (vi) All as per item No 9 (i) above S&F new fitted in Shelves of 1.25mm thick mild steel sheet duly nut/bolt with washer all as specified directed. |
| 16 | (vii) All as per items No 9 (i) M&L for one coat to old and two coats to new surfaces of synthetic enamel red-oxied of approved shade and quality over a coat of red-oxide primer by means of spray painting (internally & externally complete) |
| 17 | (viii) All as per items No 9 (i) M&L for two coat including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling with putty. After thoroughly preparing the surfaces of the Almirah steel, paint them through a spray machine to obtain a high gloss finish similar to new furniture (Make of Paint: Asian/Berger/Nerolac, Drak ovile Green). |
| 18 | ALMIRAH STEEL LARGE : FD-67(M), FD-351, FD-1031 S & F following components of almirah including dismantling taking out carefully & replace old components of almirah. Complete all as shown on drg, specified and directed by the Engineer-in-Charge. (i) Dismantling, taking out carefully old existing broken U/S Locks with key cover of any description & replacement of the same with S&F new Locks six levers, with double key including new key cover complete on external face of Almirah & suitable 4mm dia screws complete machine all as shown on drg specified and directed. (Make :- Godraj/ Harrison/ Nova) |
| 19 | (ii) All as per items No 17 (i) above Replacement of Handle with S&F new handle shall be of non-ferrous alloy with CP Godrej patten as per sample and complete with nuts and pins all as shown on drg and specified and directed by E-in-C and GE. (Make :- Godraj/ Harrison/ Nova) |
| 20 | (iii) All as per items No 17 (i) above Replacement of three way locking device with S&F new three way locking device complete with fixing accessories for steel almirah large. |
| 21 | (iv) All as per items No 17 (i) above Replacement of legs of steel almirah large with S&F new legs complete all as shown on drg, specified and directed. |
| 22 | (v) All as per items No 17 (i) above Replacement of shelf of steel almirah large with S&F new shelf complete all as shown on drg, specified and directed . |
| 23 | (vi) All as per items No 17 (i) Replacement of door shutter of steel almirah large with S&F new door shutter complete all as shown on drg, specified and directed . |
| 24 | (vii) All as per items No 17 (i) Replacement of hinges of steel almirah large with S&F new hinges SS (Make :- Hettich/ Ozone/ Epco) complete all as shown on drg, specified and directed. |
| 25 | (viii) All as per items No 17 (i) Replacement with S&F new SS conduit pipe 20 mm dia for Almirah steel or sorts complete all as shown on drg, specified and directed . |
| 26 | (ix) All as per items No 17 (i) Replacement with S&F Chromium plated safety type hasp & staples complete all as shown on drg, specified and directed. |
| 27 | (x) M&L for one coat to old and two coats to new surfaces of synthetic enamel red-oxied of approved shade and quality over a coat of red-oxide primer by means of spray painting (internally & externally complete) |
| 28 | (xi) M&L for two coat including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling with putty. After thoroughly preparing the surfaces of the Almirah steel, paint them through a spray machine to obtain a high gloss finish similar to new furniture (Make of Paint: Asian/Berger/Nerolac, Drak ovile Green). |
| 29 | (xii) Welding work wherever required as directed by EIC |
| 30 | Chair Verandh (FD-256)(i) M&L of the following components of Chair verandah including dismantling of old unservicabe and S & F recaning the chair fully both seat and back with new plastic cane, white, half round 4mm wide of 1 st quqlity, white colour in pure godrej pattern. The canning of chair shall only be carried out after complete all as specified, directed :- |
| 31 | (ii) All as per item No 29 (i) above M&L for one coat to old and two coats to new surfaces of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting (internally & externally complete) including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling with putty. After thoroughly preparing the surfaces of the Chair Varandah paint them through a spray machine to obtain a high gloss finish similar to new furniture (Make of Paint: Asian/Berger/Nerolac). |
| 32 | (iii) All as per item No 29 (i) M&L for two coat including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling with putty. After thoroughly preparing the surfaces of the Chair verandah, white paint them through a spray machine to obtain a high gloss finish similar to new furniture (Make of Paint: Asian/Berger/Nerolac, Drak ovile Green). |
| 33 | (iv) All as per item No 29 (i) above removing the existing U/S/broken PVC seat and back from the chair verandah MAP, S & F new PVC seat and back 4mm thick to the chair verandah MAP after providing flat iron 20mmx4mm support in centre of seat only by proper welding for support of PVC seat.The PVC seat shall got approved from GE before supply. MAKE OF PVC SEAT –AMKO/ COMFO/ HARMONY |
| 34 | (iv) All as per item No 29 (i) above Replacement of legs of chair varandah with S&F new legs made out of 16 Gauge MS sheet complete all as shown on drg, specified and directed. |
| 35 | (v) All as per item No 29 (i) Welding work wherever required as directed by EIC |
| 36 | (vi) All as per item No 29 (i) above Replacement the old broken shoes of chairs and S & F best quality new PVC shoes to the legs of chair. |
| 37 | Chair C B Steel With Arms (FD-75M)S & F of the following components of Chair steel tubular with arms made out of shisham wood french polished duly plastic canned in \\"Godrej\\" pattern with plastic cane 2 mm width and borders with 4 mm wide plastic cane fixed with screw 7.5 cm long (04 Nos, duly fitted one nut and one washer) to fixed the chair frame complete all as specified, directed and showm on drawings includings dismantling of old inservicable one:-(i) Replacement of legs frame of Chair Steel Tublar With Arms S&F new legs frame made out of 20 Gauge MS pipe complete all as shown on drg, specified and directed. |
| 38 | (ii) All as per item No 36 (i) above Replacement of Seat frame of Chair Steel Tublar With Arms S&F new seat frame complete all as shown on drg, specified and directed. |
| 39 | (iii) All as per item No 36 (i) above Replacement of Back frame of Chair Steel Tublar With Arms S&F new Back frame complete all as shown on drg, specified and directed. |
| 40 | (iv) All as per item No 36 (i) above Replacement of Handle made of shisham wood duly french polished and fixed to the chair with arms screw of suitable size. |
| 41 | (v) All as per item No 36 (i) above Replacement of 50 mm long flat iron piece made of 25 x 4 mm flat duly Gas welding at four corner of seat and back to supprt and screwed with the seat at two. |
| 42 | (vi) All as per item No 36 (i) above Welding work wherever required as directed by EIC |
| 43 | (vii) All as per item No 36 (i) above Replacement the old broken shoes of chairs and S & F best quality new PVC shoes to the legs of chair. |
| 44 | (viii) All as per item No 36 (i) above M&L for one coat to old and two coats to new surfaces of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting (internally & externally complete) including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling with putty. After thoroughly preparing the surfaces of the Chair steel tubular with arms paint them through a spray machine to obtain a high gloss finish similar to new furniture (Make of Paint: Asian/Berger/Nerolac). |
| 45 | (ix) M&L for two coat including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling with putty. After thoroughly preparing the surfaces of the Chair verandah, paint them through a spray machine to obtain a high gloss finish similar to new furniture (Make of Paint: Asian/Berger/Nerolac, Drak ovile Green). |
| 46 | Chair C B Steel With/Out Arms (FD-75)S & F of the following components of Chair steel tubular with out arms made out of shisham wood french polished duly plastic canned in \\"Godrej\\" pattern with plastic cane 2 mm width and borders with 4 mm wide plastic cane fixed with screw 7.5 cm long (04 Nos, duly fitted one nut and one washer) to fixed the chair frame complete all as specified, directed and showm on drawings includings dismantling of old inservicable one:-(i) Replacement of legs frame of Chair Steel Tublar With out Arms S&F new legs frame made out of 20 Gauge MS pipe complete all as shown on drg, specified and directed. |
| 47 | (ii) All as per item No 45 (i) above Replacement of Seat frame of Chair Steel Tublar With/out Arms S&F new seat frame complete all as shown on drg, specified and directed. |
| 48 | (iii) All as per item No 45 (i) above Replacement of Back frame of Chair Steel Tublar With out Arms S&F new Back frame complete all as shown on drg, specified and directed. |
| 49 | (iv) All as per item No 45 (i) above Replacement of Handle made of shisham wood duly french polished and fixed to the chair with arms screw of suitable size. |
| 50 | (v) All as per item No 45 (i) above Replacement of 50 mm long flat iron piece made of 25 x 4 mm flat duly Gas welding at four corner of seat and back to supprt and screwed with the seat at two. |
| 51 | (vi) All as per item No 45 (i) above Welding work wherever required as directed by EIC |
| 52 | (vii) All as per item No45 (i) above Replacement the old broken shoes of chairs and S & F best quality new PVC shoes to the legs of chair. |
| 53 | (viii) All as per item No 45 (i) above M&L for one coat to old and two coats to new surfaces of synthetic enamel paint of approved shade and quality over a coat of red-oxide primer by means of spray painting (internally & externally complete) including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling with putty. After thoroughly preparing the surfaces of the Chair steel tubular with out arms paint them through a spray machine to obtain a high gloss finish similar to new furniture (Make of Paint: Asian/Berger/Nerolac). |
| 54 | (ix) M&L for two coat including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling with putty. After thoroughly preparing the surfaces of the Chair steel tubular with out arms, paint them through a spray machine to obtain a high gloss finish similar to new furniture (Make of Paint: Asian/Berger/Nerolac, Drak ovile Green). |
| 55 | (i) Computer Chair Revolving (TP) M & L for taking out old broken/unserviceable of back portion providing S&F new cushion of 32 density cool foam of Computer chair 18\\"x24\\" and frame with plastic/Rubber Strip with 2\\" screw (Make of foam Godrej, Supreme) complete all as specifed and directed. |
| 56 | (ii) All as per item No 54 (i), M & L for taking out old broken/unserviceable and S&F for providing new cushion of 32 density cool foam base of seat of Computer chair 18\\"x18\\" base frame with plastic/Rubber Strip 1\\" and with 2\\" screw (Make of foam Godrej, Supreme) complete all as specifed and directed. |
| 57 | (iii) All as per item No 54 (i) M & L for providing new tapestry cloth cover for seat foam and back foam of Computer chair of approved shade & quality to cover the of Size 18x24\\" of back portion and 18\\"x18\\" thick portion of seat cost of tapestry cloth shall not be less than Rs 200 per running meter. |
| 58 | (iv) All as per item No 54 (i) above Computer chair Wheel 50 mm dia complete all as specfied and directed. |
| 59 | (v) All as per item No 54 (i) above S & F with new PP leg base (Make of Godrej, Geeken) as per trade pattern complete all as specified and directed |
| 60 | (vi) All as per item No 54 (i) above S&F new with arms handle (Make of Godrej, Geeken) complete all as specified and directed. |
| 61 | (vii) All as per item No 54 (i) above S&F new lifting Hydralic with pushing handle nut/bolt with washer (Make of Godrej, Geeken) complete all as specfied and directed. |
| 62 | (viii) All as per item No 54 (i) above S&F new plywood 12 mm thick back portion and seat base ( make BWR Ply Archidlam/Centary) complete all as specfied and directed. |
| 63 | (ix) All as per item No 54 (i) above S&F new plywood 12 mm thick back portion and back seat base ( make BWR Ply Archidlam/Centary) complete all as specfied and directed. |
| 64 | (x) M&L for two coat including preparation of steel/iron surface by removing of old paint by using grinding machine, taking out dents & filling with putty. After thoroughly preparing the surfaces of the Computer Chair , paint them through a spray machine to obtain a high gloss finish similar to new furniture (Make of Paint: Asian/Berger/Nerolac, Drak ovile Green).NOTES:-(i) Painting work shall be carried out all around on the complete exposed suraface including internal parts like shelves, drawers, stiffners, partions etc, with spray painting process.(ii) Newly reaplced parts shall be traeted with one coat of red oxide primer before painting work and cost of the same deemed included in the rate of these items.(iii) Cost of removing of all dent and correcting of deshaped profiles shall deemed to be included in the unit rate of these items.(iv) Surface and site shall be made neat and clean by the contractor.(v) Work Shall be carried out within the areas of AGE (I) R&D Haldwani, DIBER (A Cell of DIPAS) Haldwani or in the furniture yard of BSO as Specified and directed. (vi) Contractor has to visit at site before quopting tender, Tenders may be noted that amount of credit will be deducted from the total amount arived, at the time of Acceptance of contract. |
| 65 | Note :-Tenderers may be noted that amount of credit will be deducted from the total amount arrived, at the time of Acceptance of contract. Please Enable Macros to View BoQ information |
