|
| 1 | Taking down cement plaster on brick or concrete surfaces, parapets including raking out joint, hacking for key, scrubbing down with water, at any description with necessary scaffolding of max height for G+2 Bldgs etc complete all as specified and as directed. |
| 2 | Demolition of brick work built in cement mortar including all quions, arches, pillars etc but excluding ashlar facings dressed stone work and precast concrete articles complete all as specified and as directed. |
| 3 | M&L Brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and as directed. |
| 4 | M&L for rendering 15mm thick in cement mortar 1:4 in layer ( 10 mm + 5mm ) mixed with PD proof 101 LW (OR +) of Dr fixit integral WP admixture (or equivalent from list of makes) @ 200 ml/bag of cement over two coats of super latex 302 of Dr Fixit (or equivalent from list of makes) in the ration 1:4:7 (one part super latex 302, 4 part water and 7 part cement) @ 1050 kg of homogeneous mixture per sqm in two coats and finished the surface even and fair without using extra cement complete all as specified and as directed.Note : Water Proofing compound shall be measured and paid separately |
| 5 | Supply only SBR based Latex for waterproofing complete all as specified and as directed. |
| 6 | M&L for rendering 10 mm thick in CM ( 1:6 ) on wall/ concrete surfaces finish even and smooth without using extra cement complete all as specified and directed. |
| 7 | M & L for rendering 15mm thick in two layer (10mm+5mm) in cement mortar 1:4 on fair faces of brick work / concrete surfaces finished even and smooth without using extra cement with WPC complete all as specified and as directed. Note:- (i) Water proofing compound on only top layer of plaster (ie 5mm thick)(ii) Qty of WPC 200ml per cement bag as per manufacturer instructions (iii) WPC shall be measured and paid separately) |
| 8 | M&L for rendering 5mm thick in ceiling cement mortar 1:3 on concrete surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 9 | Supply only Liquid water proofing compound complete all as specified and directed. |
| 10 | M & L for preparation of new plastered surface of wall and applying two coats of oil emulsion distemper over a coat of primer over a coat of wall care putty 3mm thick complete all as specified and directed. Note : (i) The entire stock of material / distemper will be kept at a storeroom provided to the contractor. Two lock system for the storeroom will have one key with the contractor and the other with Engr-in-charge.(ii) The painting is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 11 | M&L for preparation of new plastered/unplastered surface and finishing walls with Acrylic Smooth exterior paint of required shade as approved by GE with two or more coats applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) on walls over 3mm thick plaster of paris putty including necessary scaffolding for max height of G+2 bldg with parapet, etc complete all as specified and directed.Note:- (a) Each stage i.e. preparation of surfaces, application of primer, application of first coat, application of second coat will be got passed from Engr-in -Charge.(b) The acrylic emulsion paint work shall be carried out by using smart painting tools and techniques as specified in Particular Specifications and Contractor will have to produce necessary documents for purchase of smart painting tools or rent receipt of these tools along with bill/RAR.The bidders are requested take this aspect in consideration before quoting their rate and no claim on account of misunderstanding or otherwise shall be admissible on this account. (c) The painting is to be done in one or more shades as approved by GE.(d) The entire stock of paint will be kept at a storeroom provided to the contractor. Two lock system for the storeroom will have one key with the contractor and the other the user, either PMG rep/user unit rep will be present when the storeroom will be opened for the issue of paints for specific work. |
| 12 | M & L for preparing new plastered surfaces of ceiling and applying two coats of oil emulsion distemper complete all as specified and directed. Note : (i) Entire stock of material / distemper will be kept at a storeroom provided to the contractor. Two lock system for the storeroom will have one key with the contractor and the other with Engr-in-charge.(ii) The painting is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 13 | M&L for preparation of old decorated plastered or unplastered surface including complete removal by brooming down with steel wire brushing, scraping down smoke soot, moulded, moss, efflorscent salt, trading oil and greasy spots and finishing walls with Acrylic Smooth exterior paint of required shade as approved by GE with two or more coats applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) on walls over 3mm thick plaster of paris putty including necessary scaffolding for max height of G+2 bldg with parapet, etc complete all as specified and directed.Note:- (a) Each stage i.e. preparation of surfaces, application of primer, application of first coat, application of second coat will be got passed from Engr-in -Charge.(b) The acrylic emulsion paint work shall be carried out by using smart painting tools and techniques as specified in Particular Specifications and Contractor will have to produce necessary documents for purchase of smart painting tools or rent receipt of these tools along with bill/RAR.The bidders are requested take this aspect in consideration before quoting their rate and no claim on account of misunderstanding or otherwise shall be admissible on this account. (c) The painting is to be done in one or more shades as approved by GE.(d) The entire stock of paint will be kept at a storeroom provided to the contractor. Two lock system for the storeroom will have one key with the contractor and the other the user, either PMG rep/user unit rep will be present when the storeroom will be opened for the issue of paints for specific work. |
| 14 | M&L for preparation of old decorated plastered or unplastered surface including complete removal by machinary only, scraping down smoke soot, moulded, moss, efflorscent salt, trading oil and greasy spots and applying two coat of Oil emulsion distemper on walls as complete all as specfied and directed.Note : (i) Entire stock of material / distemper will be kept at a storeroom provided to the contractor. Two lock system for the storeroom will have one key with the contractor and the other with Engr-in-charge.(ii) The painting is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 15 | M&L for preparation of old decorated plastered or unplastered surface and applying one coat of Oil emulsion distemper on walls complete all as specified and directed. Note : (i) Entire stock of material / distemper will be kept at a storeroom provided to the contractor. Two lock system for the storeroom will have one key with the contractor and the other with Engr-in-charge.(ii) The painting is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 16 | M&L for preparation of old plastered surfaces of ceiling and applying one coat of oil emulsion distemper over a coat of primer complete all as specified and directed. Note : (i) Entire stock of material / distemper will be kept at a storeroom provided to the contractor. Two lock system for the storeroom will have one key with the contractor and the other with Engr-in-charge.(ii) The painting is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 17 | M&L 3mm thick wall care putty on wall complete all as specfied and directed.Note: The putty is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 18 | M&L 3mm thick wall care putty on ceiling complete all as specfied and directed.Note: The putty is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 19 | Preparation of old decorated plastered or unplastered surfaces of walls by brooming down or by steel wire brushes, scraping down smoke spot, moulds, moss and efflorescent salts, trading oil, greasy spots etc and applying with applicator one coat of white wash on walls after filling any hole with putty complete all as specified and directed. |
| 20 | All as per above ser item No 19 but applying with applicator one coat of white wash on ceiling complete all as specified and directed. |
| 21 | All as per above ser item No 19 but applying with applicator one coat of cement base paint on walls (upto three storeyed bldgs) complete all as specfied and directed.Note: The painting is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 22 | All as per above ser item No 19 but applying with applicator two coat of cement base paint on walls (upto three storeyed bldgs) complete all as specfied and directed.Note: The painting is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 23 | M&L for proper cleaning of suface of chequered tile, paver block, nanital pattern roof sheet etc and applying two coats of terracota paint of required shade complete all as specified and directed. |
| 24 | Extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirtings, drip moulds and similar work exc 15 cm but n exc 30 cm in width or girth; including cutting to edges, all mitres and stopped ends, etc. complete all as specified and directed. |
| 25 | Extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirtings, drip moulds and similar work exc n exc 15 cm in width or girth; including cutting to edges, all mitres and stopped ends, etc. complete all as specified and directed. |
| 26 | Complete removal of existing treatment and applying two coat of synthetic enamel paint on wooden surfaces of any description over 10 cm width or girth complete all as specified and as directed. Note : (a) Entire stock of material / distemper will be kept at a storeroom provided to the contractor. Two lock system for the storeroom will have one key with the contractor and the other with Engr-in-charge. |
| 27 | Complete removal of existing treatment and applying two coats of synthetic enamel paint on steel surfaces of any description over 10 cm width or girth complete all as specified and as directed. Note- (a) Entire stock of material / distemper will be kept at a storeroom provided to the contractor. Two lock system for the storeroom will have one key with the contractor and the other with Engr-in-charge. |
| 28 | Complete removal of existing treatment and Finishing walls with textured interior/exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm complete all as specified and as directed. Note- (a) Entire stock of material / distemper will be kept at a storeroom provided to the contractor. Two lock system for the storeroom will have one key with the contractor and the other with Engr-in-charge. |
| 29 | Demolition of cement concrete including floor tiles or stone in any description and any position etc removal from site up to 500 m complete all as specified and directed |
| 30 | M&L plain cement concrete 1:3:6, type B1( using 20mm graded crushed stone aggregate) 75mm thick as in plinth protection complete all as specified and directed . |
| 31 | S&F for in repair 110mm dia SWR (PVC) pipes single socket in any length with rubber ring joints fixed to wall with stack clamp, etc complete all as specified and directed. |
| 32 | S&F for in repair 75mm dia SWR (PVC) pipes single socket in any length with rubber ring joints fixed to wall with stack clamp, etc complete all as specified and directed. |
| 33 | S&F for in repair PVC (SWR) bends any radius for 110mm dia pipe complete all as specified and directed. |
| 34 | S&F for in repair PVC (SWR) bends any radius for 75mm dia pipe complete all as specified and directed. |
| 35 | Taking up or down 15 mm dia old serviceable / unserviceable steel tubing any grade and connections cleaning for re-fixing or removal to store complete all as specified and directed . |
| 36 | All as per above Ser item no 35 above but 20mm bore complete all as specified and as directed. |
| 37 | S&F steel tubing medium grade ,galvanized with all fitting such as bend ,elbow, socket,tees,and fixed complete to wall or in ceiling or in floors including cutting threading and making forged bends on pipes MS hooks etc ,for 15mm bore pipes complete all as specified and as directed. |
| 38 | All as per above Ser item no 37 above but 20mm bore complete all as specified and as directed. |
| 39 | S& F in repair Rotational moulded Polyethylene three layer white in colour water storage tank 500 liters capacity (cylidrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I complete all as specified and as directed.. |
| 40 | S& F in repair Rotational moulded Polyethylene three layer water storage tank 1000 liters capacity (cylidrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I complete all as specified and as directed.. |
| 41 | S & F 20 mm bore ball brass valves high pressure with polythelene float and fly nut complete screwed for iron pipe and shelf of PTMT fixed length and complete all as specified and as directed. |
| 42 | S&F of stop valves fancy type chromium plated with long shanks fixed with 15 mm dia bore pipes complete all as specified and as directed. |
| 43 | Disconnecting existing tanks capacity of tanks exe 250 ltr and n.exe 500 ltr setting aside (or lowering if required) for repair, cleaning etc and hoisting if required reconnecting and re-fixing in position including Cleaning & removing all dirt and scale from tank and also from mouth of pipe complete all as specified and directed. |
| 44 | Disconnecting existing tanks capacity of tanks exe 500 ltr and n.exe 1000 ltr setting aside (or lowering if required) for repair, cleaning etc and hoisting if required reconnecting and re-fixing in position including Cleaning & removing all dirt and scale from tank and also from mouth of pipe complete all as specified and directed. |
| 45 | S&F 3.00 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beading in square not exceeding 0.50 sqm in each panes including hacking out old broken glass (any tickness size ,quality or description ) from wooden frame or steel frame etc and complete all as specified and directed. |
| 46 | S&F 3.00 mm thick sheet glass figured glass pin head type and glazing with oil putty or wooden beading in square not exceeding 0.50 sqm in each panes including hacking out old broken glass (any tickness size ,quality or description ) from wooden frame or steel frame etc and complete all as specified and directed. |
| 47 | S&F 5.50 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beading/rubber gasket in square not exceeding 0.50 sqm in each panes including hacking out old broken glass (any tickness size ,quality or description ) from wooden frame or steel/aluminium frame etc and complete all as specified and directed. |
| 48 | S&F in repair Aluminium Composite Panel (ACP) 6mm thick any colour fixed to aluminium frame with rubber beading/gaskit or aluminium glazing clip from both sides complete all as specified and directed. |
| 49 | S&F in repair Door closer hydraulically regulated aluminium (extruded section) body, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. |
| 50 | S&F in repair Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed including taking down of exiting glass/aluminium door and refixing in same position complete all as specified and directed. |
| 51 | S & F MS framed work as in frame work water tank or other section with gusset plate, etc complete, drilled for fixing of steel sheeting or other covering etc, to prepared for hanging or sliding with including either hooks and hinges also fastening grills, grating,and similar work confirming to fe 290 Gde E-165 complete all as specified and as directed. |
| 52 | Preparation of newly steel surfaces, of any description, over 10 cm width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide complete complete all as specified and as directed. |
| 53 | Providing and applying camouflage pattern painting on existing surfaces (concrete/brick/steel/wood) using approved quality exterior acrylic emulsion paint of required shade including complete removal of existing paint/coating/treatment by scraping, wire brushing, sanding, chemical treatment or mechanical means as required; thorough surface cleaning; application of primer where necessary; and applying approved multi-tone camouflage pattern and colors using brush/roller/spray, complete in all respects as per manufacturer's, specifications, and complete all as specified and directed.Note : (i) Entire stock of material / distemper will be kept at a storeroom provided to the contractor. Two lock system for the storeroom will have one key with the contractor and the other with Engr-in-charge.(ii) The painting is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 54 | M&L for writing letters or figures (Block. Roman. Italic or Indian) to building with synthetic enamel paint 65mm long and 10mm wide in words and figures such as (PN-10,TN-27,T-123 & T-81/2 etc) over black synthetic enamel painted ground of 150mm dia incl obliterating old writting of any description n exc 0.10 sqm with paint to match existing work complete all as specified and as directed. Note- considering PN-10/TN-27/T-123/T-81/2 No as unit. Please Enable Macros to View BoQ information |
