|
| 1 | Taking down cement plaster on brick or stone surfaces etc. including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed. |
| 2 | 15mm thick plastering in CM 1:4 on stone surfaces (EXTERNAL), surface finished even and smooth without using extra cement, complete all as specified and directed. |
| 3 | 10mm thick plastering in CM 1:6 on stone surfaces (INTERNAL), surface finished even and smooth without using extra cement complete all as specified and directed. |
| 4 | M&L for Rendering 5 mm thick in CM (1:3) on ceiling finished even and smooth without using extra cement including two coat of white wash on ceiling including preparation of surface complete all as specified and directed. |
| 5 | M&L for preparation of newly plastered surface of wall and applying three coats of white wash surfaces complete all as specified and directed. |
| 6 | Preparation of old decorated plastered or unplastered surface including cleaning by brooming down with steel wire brushing, scraping down smoke soot, moulded, moss, efflorscent salt, trading oil and greasy spots and applying with applicator one coat of white wash on walls complete all as specified and directed. |
| 7 | All as per item No 6 here-in-before but one coat of oil bound distemper on ceiling complete all as specified and directed.Note: The painting is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 8 | All as per item No 6 here-in-before but applying one coat of oil bound distemper on walls complete all as specified and directed.Note: The painting is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 9 | All as per item No 6 here-in-before but applying two coat of oil bound distemper on walls complete all as specified and directed.N+B21ote: The painting is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 10 | All as per srl item No 6 here in before but applying with applicator one coat of cement base paint on walls (upto three storeyed bldgs) complete all as specified and directed.Note: The painting is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 11 | All as per srl item No 6 here in before but applying with applicator two coat of cement base paint on walls (upto three storeyed bldgs) complete all as specified and directed.Note: The painting is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 12 | Preparation of old plastered surfaces of ceiling and applying two coat of white washing, complete all as specified and directed. |
| 13 | Two coats of oil bound distemper on newly plastered surface over a coat of chalk whiting, on plastered surfaces, preparatory to distemping including preparation of surface complete all as specified and directed.Note: The painting is to be done using smart painting tools and technique as mentioned in Particular specification. Tenderer shall take this aspect in consideration before quoting his rates and no claim on account of misunderstanding or any thing else shall be admissible/acceptable at any later stage. |
| 14 | M&L for preparation of old decorated plastered or unplastered surface including complete removal by brooming down with steel wire brushing, scraping down smoke soot, moulded, moss, efflorscent salt, trading oil and greasy spots and finishing walls with Acrylic Smooth exterior paint of required shade as approved by GE with two or more coats applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) on walls over 3mm thick plaster of paris putty complete all as specified and directed.Note:- (a) Each stage i.e. preparation of surfaces, application of primer, application of first coat, application of second coat will be got passed from Engr-in -Charge.(b) The acrylic emulsion paint work shall be carried out by using smart painting tools and techniques as specified in Particular Specifications and Contractor will have to produce necessary documents for purchase of smart painting tools or rent receipt of these tools along with bill/RAR.The bidders are requested take this aspect in consideration before quoting their rate and no claim on account of misunderstanding or otherwise shall be admissible on this account. (c) The painting is to be done in one or more shades as approved by GE. |
| 15 | M&L for preparation of new plastered/unplastered surface and finishing walls with Acrylic Smooth exterior paint of required shade as approved by GE with two or more coats applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) on walls over 3mm thick plaster of paris putty complete all as specified and directed.Note:- (a) Each stage i.e. preparation of surfaces, application of primer, application of first coat, application of second coat will be got passed from Engr-in -Charge.(b) The acrylic emulsion paint work shall be carried out by using smart painting tools and techniques as specified in Particular Specifications and Contractor will have to produce necessary documents for purchase of smart painting tools or rent receipt of these tools along with bill/RAR.The bidders are requested take this aspect in consideration before quoting their rate and no claim on account of misunderstanding or otherwise shall be admissible on this account. (c) The painting is to be done in one or more shades as approved by GE. |
| 16 | Preparation of old painted wooden surfaces of any description and otherwise described over 10 CM width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 17 | Preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying with applicator one coat of synthetic enamel paint complete all as specified and directed. |
| 18 | Demolition of cement concrete in ground floor and paving n.exc 15cm thickness (below & above GL) unreinforced complete all as specified and directed. |
| 19 | Demolition of cement concrete in ground floor and paving exc 15cm thickness (below & above GL) unreinforced complete all as specified and directed. |
| 20 | M&L for 50mm thick cement concrete M-10 nominal mix type C2 using 20mm graded crushed stone Agg as in plinth protection and similar works finished even and smooth without using extra cement complete all as specified and directed. |
| 21 | M&L PCC 75mm thick 1:4:8 type D 2(40mm graded crushed stone aggregate ) as in sub base complete all as specified and directed. |
| 22 | M&L for Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 23 | M&L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness with grey cement and pigment, M-40 Grade etc complete all as specified and directed. |
| 24 | M&L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness with grey cement and No pigment, M-40 Grade etc complete all as specified and directed. |
| 25 | M&L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness with grey cement and pigment, M-40 Grade etc complete all as specified and directed. |
| 26 | M&L for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness with grey cement and No pigment, M-40 Grade etc complete all as specified and directed. |
| 27 | M & L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed. |
| 28 | Dismantling floor,hearth or wall tiling including cement mortar bedding(but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 29 | Demoltion of Stone slabs and tiles of any description or thickness in floors, aprons etc. Laid or laid bedded or laid bedded dry and pointed in any in any mortar complete all as specified and directed. |
| 30 | M & L for Glazed ceramic colored tiles 300mmx600mmx 6 to 7mm thick,as in patches in vertical surfaces such as dado, skirting, wall etc set & jointed in neat cement slurry and pointed with coloured cement to match with tiles in over and including 10mm thick cement plaster in cement mortar 1:4 complete all as specified and as directed. |
| 31 | Machine cut kota stone flooring 18-20 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone including grinding and polishing (mirror finish) (Each stone not less than 55 cms x 55 cms) over and including 25mm thick PCC (1:2:4) type B1 using 20 mm graded crushed stone aggregate over and including 15mm thick screed bed in CM ( 1:4) as in floor finished rough and applying a coat of cement slurry @ 03 Kg/Sqm of surface complete all as specified and directed. |
| 32 | Machine cut kota stone slab 18-20mm thick in skirting, dado and pillar laid and jointed with grey cement slurry mixed with pigment to match the shade of the stone including grinding and polishing ( mirror finish) over 15 mm thick rendering in CM ( 1:4) including taking out of existing dado complete all as specified and directed. |
| 33 | M&L Makrana white marble 18- 20mm thick machine cut, bedded jointed and pointed with white cement slurry including cutting and polishing types (mirror finish) over 15mm thick screed bed in CM ( 1:6) as in floor finished, complete all as specified and directed. |
| 34 | Taking down chowkat or frames with shutter (without taking off shutter from the frame)area exc 1.5 Sqm but n.exc 4.0 Sqm each complete with hold fasts etc complete all as specified and directed. |
| 35 | Taking down chowkat or frames with shutter (without taking off shutter from the frame) area n exc 1.5 Sqm each complete with hold fasts etc complete all as specified and directed. |
| 36 | Taking down shutter of any description area exc 1.0 Sqm but n.exc 2.0 Sqm complete all as specified and directed. |
| 37 | S&F pressed steel frame for door with two rebate incl necessary fixing lugs,hings,lock strike plate complete al as specified of size 105x60mm complete all as specified and directed. |
| 38 | S&F pressed steel frame size 125x60mm. for door with two rebate incl necessary fixing lugs,hings,lock strike plate complete all as specified and directed. |
| 39 | S & F for 40mm thick 2nd class H.W plain framed, panelled shetter(any number of panels ) with panels of timber flat on both sides (feather edged) or of veneered particle board 9mm or 12mm thick medium density , wood particle board with commercial face veneers supplied and fitted to chowkhats complete all as specified and directed. |
| 40 | S & F for 35mm thick 2nd class H.W wire/ glazed door shutter edged of frame plain chamfered or rounded fitted with cut and mitred beads for securing glass/gauge etc size of members of shutters as specified and fitted to chowkat complete all as specified and directed. |
| 41 | M& L for two coats of synthetic enamel paint on New wooden surface over a coat of Pink Primer incl preparation of surface area over 10cm width or girth complete all as specified and directed. |
| 42 | S&F in Repair 1mm thick of lath in Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type complete all as specified and directed. |
| 43 | Hacking out old broken glass of any thickness ,size, quality or description n exc 1.5 sqm from wooden /metal frames including punching or drilling out old glazing pins/spring clips and providing and fixing new ones etc complete all as specified and directed. |
| 44 | S& F 3 mm thick sheet glass, ordinary quality type and glazing with oil putty in squares n exc 0.50 Sqm in each pane complete all as specified and directed. |
| 45 | S & F galvanised mild steel wire cloth 0.56 mm nominal dia of wire and average width of aparture 1.18mm fixed with tinned tacks or galvanised wire stapple complete all as specified and directed. |
| 46 | S & F Box type Steel windows and ventilator with double shutters (inside for wiremesh & out side for glass), incl guard bar,hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded including a coat of red oxide after preparation of surface before fixing.Steel window shall be conforming to relevant IS complete all as specified and directed. |
| 47 | Solid PVC Door Frames of size 50mm X47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 48 | Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 49 | S & F mild steel works as in bands, straps, supports or stays for rainwater, ventilating pipes incl bolts if required, hooks, hasp and staple, clamps, hold fasts , wall ties, hooks for hanging fans, plain angle cleats etc and similar works complete all as specified and directed. |
| 50 | M&L PCC 1:3:6 type C1 in hold fast etc incl all necessary formwork complete all as specified and directed. |
| 51 | S & F MS butt hinges 100mm medium weight cold rolled complete all as specified and directed. |
| 52 | S & F MS butt hinges 75mm medium weight cold rolled complete all as specified and directed. |
| 53 | S & F 150mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 54 | S & F 100mm Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 55 | S & F Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed. |
| 56 | S & F Aluminium anodised handle 150mm cast type complete all as specified and directed. |
| 57 | S & F Aluminium anodised handle 100mm cast type complete all as specified and directed. |
| 58 | S & F MS helical door spring 300mm ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed. |
| 59 | Taking up or down GI tubing 15mm bore with all connection complete all as specified and directed. |
| 60 | S&F 15mm bore GI tubing medium grade galvanized with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and directed. |
| 61 | Fixing only 15mm bore GI tubing medium grade galvanized with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and directed. |
| 62 | Taking up or down GI tubing 20mm bore with all connection complete all as specified and directed. |
| 63 | S&F 20mm bore GI tubing medium grade galvanized with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and directed. |
| 64 | Fixing only 20mm bore GI tubing medium grade galvanized with all fittings and fixed complete to walls and ceiling or laid in floor complete all as specified and directed. |
| 65 | S&F CP bib tap 15 mm bore with crutch or butterfly handle screwed down for iron pipe or for brass ferrule fixed in repair complete all as specified and directed. |
| 66 | S&F in repairs Fancy cromium plated stop cock Angle valve 15 mm dia cast copper alloy screwed down light pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed. |
| 67 | S&F in repairs Fancy stop cock 15 mm dia (Concealed Type)cast copper alloy screwed down light pressure with crutch or butterfly handle screwed both ends for iron pipe or for union complete all as specified and directed. |
| 68 | S&F vitreous china wash down water closet pan(pedestal pattern) white/coloured match to the tiles (excluding flushing cistern) fixed in repairs complete all as specified and directed. |
| 69 | S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed. |
| 70 | S&F vitreous china squatting pan Orrisa pattern 580x440mm white with integral foot rest (excluding flushing cistern) fixed in repairs complete all as specified and directed. |
| 71 | S&F Plastic water closet seat cover, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device fixed in repair complete all as specified and directed. |
| 72 | S&F 10 Ltr PVC valve less symphonic action type flushing cistern low level white/coloured with inlet ball valve float , handle, PVC pipe to WC and incl PVC connection 600mm long complete fixed in repairs complete all as specified and directed. |
| 73 | S & F in Repair vitreous china wash basin , white flat back of size 550x400mm fixed in repair including cutting for and pining in ends of brakets including 15mm dia piller tap cast copper alloy with capstan head cromium plated screwed down high pressure with or without lettred hot or cold with long screw shanks and fly nuts screwed for iron pipe complete all as specified and directed. |
| 74 | S&F in Repair Vitreous China Urinal, Half stall type, white with PTMT waste fitting, PVC waste pipe, brass CP urinal spreader including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws complete all as specified and directed. |
| 75 | S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed. |
| 76 | S&F in Repair Vitreous china urinal partition white of size 310x700 mm complete all as specified and directed. |
| 77 | S & F 15mm bore Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed in repair complete all as specified and directed. |
| 78 | S&F in repair Towel Rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats(Minimum weight 190gms) complete all as specified and directed. |
| 79 | S&F Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) with Shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour complete all as specified and directed. |
| 80 | S&F PVC (SWR) floor trap with grating including jointing to waste pipe in solvent for 75mm bore including CP grating cover with or without hole complete all as specified and directed. |
| 81 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers as fixed in repairs complete all as specified and directed. |
| 82 | Dismantling water tank and removing to stores exc 500ltr n.exc 1000ltr complete all as specified and directed. |
| 83 | Dismantling water tank and removing to stores exc 250ltr n.exc 500ltr complete all as specified and directed. |
| 84 | S&F 1000 litres capacity rotational moulded polyethylene water storage tanks in double layer (Cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed. |
| 85 | S&F 500 litres capacity rotational moulded polyethylene water storage tanks in double layer (Cylindrical vertical with closed top), hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed. |
| 86 | S&F in repairs 20 mm dia Ball valve PTMT valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule complete all as specified and directed. |
| 87 | Demolition of cement concrete (unreinforced) as in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed. |
| 88 | M&L Providing, cement concrete 1:2:4 type B-0 (12.5mm graded aggregate ) as in roof kerbs or mud stops, rounded or chamfered on edges or as in padding concrete complete all as specified and as directed. |
| 89 | M&L for 10 mm rendering in CM 1:4 including water proofing compound @2% of cement over roof surfaces finished even and smooth without using extra cement Complete all as specified and as directed.Note:- WPC Mesured and Paid Separately. |
| 90 | Applying evenly a tack coat of induatrial bitumen 85/25 grade @ 1.2 Kg/Sqm complete all as specified and directed. |
| 91 | One layer of APP based polymeric membrane of approved manufacturer, 3mm thick, weight not less than 3.50 Kgs per Sqm , reinforced with non woven polyester fabric or weight not less than 150 gms per Sqm . Polymeric membrane shall be taken to a height 60 cm (minimum) and then inserted inside the groove of parapet wall and shall be finished by a membrane flashing complete all as specified and directed.Note (i) Laying of APP based polymeric membrane shall be done by torch on method or as per manufacturers instructions (ii) A Minimum overlap of 100 mm and 75 mm should be made in the end and sides of the polymeric membrane respectively and sealed all overlaps and joints as manufacturers instructions (iii) Fixing of APP based polymeric membrane procured from any approved manufacturer will be done by authorised persons of the same manufacturer as per provns of relevent IS. |
| 92 | Supply only integral water proofing compound complete all as specified and directed. |
| 93 | Demolition of brick work, stone/boulder masonry built in cement mortar complete all as specified and directed. |
| 94 | M&L for PCC 1:3:6 Type C-2 (using 40mm graded crushed stone Agg) as in foundations, filling and mass concrete complete all as specified and directed. |
| 95 | M&L Brickwork with subclass ‘B’ bricks old size, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 CM complete all as specified and directed. |
| 96 | All As per Item No 95 But Except Brick complete all as specified and directed. |
| 97 | M&L Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:4 complete all as specified and as directed. |
| 98 | M&L Walling of random rubble, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:4 except stone complete all as specified and as directed. |
| 99 | Rendering 15mm thick in cement mortar 1:4 on stone masonry surfaces or surface other than fair face of brick-work or on one side of lathing, finished even and smooth without using extra cement complete all as specified and as directed. |
| 100 | Providing, cement concrete Type B-0 1:2:4 (12.5mm graded crushed stone aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed. |
| 101 | M&L Cement concrete Type C2 (1:3:6) using 40 mm graded aggregate in surface channels and drains complete all as specified and directed. |
| 102 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided complete all as specified and directed. |
| 103 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed. |
| 104 | Reinforced cement concrete (M-25 design mix) in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies,canopies, deck slabs and in shelves and the like (20 mm graded aggregate) complete all as specified and directed. |
| 105 | Per- cast cement concrete M-15 (1:2:4 nominal mix ) type B-I, (Using 20mm grade stone agg) set in cement mortar 1:4 as in manhole cover complete all as specified and directed. |
| 106 | TMT MS bars 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns ends and binding with mild steel wire (annealed ) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 107 | Mild steel framed work such as grills, gratings etc with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to E-165 (Fe-290) complete all as specified and directed. |
| 108 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion from cement concrete and making good disturbed ground complete all as specified and directed. |
| 109 | Excavation for post holes in any type of soil (or in similar hole ) each n.exc 0.50 Cum including dismantling PCC including disposal of surplus n.exc 50m complete all as specified and directed. |
| 110 | M&L for PCC 1:3:6 type C-2 (20mm graded aggts) in foundation filling and mass concrete complete all as specified and directed. |
| 111 | M&L for posts and struts in fencing of angle, tee including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or FE 310-0 complete all as specified and directed. |
| 112 | Fixing chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc including provision of binding wire complete all as specified and directed. |
| 113 | Supply only PVC coated MS Chain link fencing with line wires,any type and mesh size and any type of standards and dia of wire ( as directed by Engineer-in-charge) fixed with rails, staining bolts etc including provision of binding wire including dismantling existing unserviceable fencing complete all as specified and directed.(Note: rails, staining bolts will be measured in seperate Item) |
| 114 | Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long and 5 to 10mm dia of shank complete all as specified and directed |
| 115 | S&F, TMT steel bars 10mm dia and over, cut to length bent to shape required including cranking bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 116 | Preparation new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified and directed. |
| 117 | M&L Galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc as complete all as specified and directed. Please Enable Macros to View BoQ information |
