|
| 1 | Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. Note - item to be applicable in urban areas having directions for restricted hours for movement/plying of load carrying motor vehicle of 3.5 cum or more. DAR-1.1.18, |
| 2 | Providing and fixing G.I. Union in existing G.I. pipe line, cutting and inclulding threading the pipe and making long screws, including excavation, refilling the earth or cutting of wall and making good the same complete wherever required ( 20 mm nominal bore ) 18.47.2 |
| 3 | Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4mm wide aperture with matching wood beading DSR 9.7.8 |
| 4 | Providing and fixing C.P. Brass bib cock of approved quality conforming to IS: 8931 15 mm nominal bore ( 18.49.1) |
| 5 | Providing and fixing C.P. Brass long nose bib cock of approved quality conforming to IS Standerd and weighing not less 810 gms. 15 mm nominal bore ( 18.50.1) |
| 6 | Providing and fixing C.P. Brass Angle Valve for basin mixer and geyser points of approved quality conforming to IS:8931. 15 mm nominal bore ( 18.53.1) |
| 7 | Providing and fixing C.P. Brass extentsion nipple (Size-15x50mm) of approved make and quality as per direction of engineer-in-charge. ( 18.53A) |
| 8 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. 20 mm nominal bore, 120 mm long, weighing not less than 198 gms DSR NO-18.62.2 |
| 9 | Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour.15 mm nominal bore with 45 cm length DSR NO-18.74.2 |
| 10 | Cutting holes up to 30x30 cm in walls including making good the same With common burnt clay F.P.S. (non modular) bricks DSR NO-18.76.1 |
| 11 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS: 13592 Type A, including jointing with seal ring conforming to IS: 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes 110 mm diametar DSR NO-12.41.2 |
| 12 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.DAR NO-15.56 |
| 13 | 15 mm cement plaster on rough side of single or half brick wall of mix :1:4(1 cement: 4 coarse) (dar 13.5.1) |
| 14 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. DSR NO-13.92 |
| 15 | Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.(D.S.R Item-13.80) |
| 16 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour Old work (one or more coats) 13.81.1 |
| 17 | Finishing walls with Acrylic premium Smooth exterior paint with Silicon additives of required shade: New work ( Two or more coats applied @ 1.43ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm) (apex Ultima, weather coat All guard) asian, berger. ( D.S.R Item 13.47.1 ) |
| 18 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade Old work ( Two or more coats applied @ 1.43 ltr/10sqm) over existing cement paint surface (apex Ultima, weather coat All guard).13.112.1 |
| 19 | Providing and fixing 10 mm thick acid and/or alkali resistant tiles of approved make and colour using acid and/or alkali resisting mortar bedding, and joints filled with acid and/or alkali resisting cement as per IS : 4457, complete as per the direction of Engineer-in-Charge.In dado/skirting on 12 mm thick mortar 1:4 (1 acid proof cement: 4 coarse sand)Acid and alkali resistant tile DSR NO-11.21.2.1 |
| 20 | Providing and laying vitrufied floor tile in different sizes ( thickness to be specified by the manufacturer)with water absorption less than 0.08% and comferming to IS :15622 , of approved make in all colour and shade , laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand ) jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigment etc complete (ch-13- ref- 11.41.2) ( size of tile 600x600 mm ) |
| 21 | Providing and fixing 6 mm thick both sides Pre-laminated cement bonded wood particle board as per IS: 15786:2008 of approved brand and shade with suitable full threaded steel screws etc. on the backing of racks, drawer, cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of Engineer-in-charge.DSR NO-9.167 Please Enable Macros to View BoQ information |
