|
| 1 | Safe carriage of following materials from Store centre or any other place to the respective site of work through the Kachha/Pacca road including loading, unloading at the respective ends and erection of same including the work of dragging as per site requirement, jumphering, Cost of labour, T&P carrier etc. required for proper completion of work as per RESPO Norms is included in the work. |
| 2 | 33 KV RING MAIN UNIT 4 WAY MOTRIZED OUT DOOR TYPE 630 |
| 3 | 33 KV XLPE CABLE 3*300 SQ MM |
| 4 | 33 KV CABLE JONTIG KIT OUTDOOR |
| 5 | 33 KV CABLE JONTIG KIT INDOOR |
| 6 | STP POLE 13 METER LONG SP 70 |
| 7 | DISC INSULATOR B & S TYPE 7000 KG |
| 8 | DISC FITTING FOR DOG 7000 KG |
| 9 | 33 KV PIN INSULATOR |
| 10 | 33 KV PIN WITH N&B |
| 11 | STAY SET COMPLETE |
| 12 | EARTHING COMPLITE |
| 13 | ACSR DOG CONDUCTOR FOR JUMFARING |
| 14 | LINE ISOLATER 800 A 33 KV |
| 15 | 33KV V Type Cross Arm |
| 16 | 11KV VCB I/C 800/400/5A, 24 Volt. (1250Amp) |
| 17 | 11KV VCB O/G 400/200/5A, 24 Volt. (1250Amp) |
| 18 | Supply, fixing and erection of following materials as per site requirement as per RESPO Norms:- |
| 19 | STONE PAD |
| 20 | M.S. ANGLE 65X65X6X3800 MM. FOR BRACING SET WITH 04 NO CLAMPS |
| 21 | TOP CHANNEL (125X65X3200 MM.) WITH CLAMP |
| 22 | DROPPER CHANNEL |
| 23 | CLAMP WITH NUT & B |
| 24 | P.G. CLAMP FOR DOG CONDUCTOR |
| 25 | NUMBER PLATE WITH CLAMP FOR 33 KV |
| 26 | DANGER BORD WITH CLAMP FOR 33 KV |
| 27 | E BRACKAT FOR 33 KV |
| 28 | BARBED WIRE |
| 29 | M.S. NUT BOLT & WASHERS ALL SIZE |
| 30 | ALLUMINIUM PAINT |
| 31 | RED OXIDE PAINT |
| 32 | Cross Arm Holding Clamp |
| 33 | Concreting of the support by a mixture of 1:4:8 (by volume). The size of the pole plinth is kept as 450x450 mm and height 300 mm above ground level as per drawing. The top 100 mm is kept tapered so that no rainwater gets accumulated on the top. The underground portion of the concreting shall be 450 mm x 450 mm x depth of plantation of support. |
| 34 | Concreting of Stay |
| 35 | Plinth for 11 KV RMU as per RESSPO Norms |
| 36 | Neutral & Body earthing at 11KV RMU by digging of pit upto water level depth and then inserting 1-¼” dia GI pipe of ‘A’ grade, conforming to the requirement of IS specification and then connecting the top of the inserted pipe and transformer body through GI strip of size 40x6 mm with the help of nut and bolt or through gas welding, as per direction of supervising engineer. It includes the cost of all material labour, T&P, carrier etc. required for proper completion of work. The aforesaid work shall be carried out as per RESSPO norms. |
| 37 | Providing and fixing of welded wire mesh fencing around 11KV RMU with M.S. Angle of size 35X35X6 mm. length and 1.20 Meters height, such panels shall be supported on M.S. Angle from of size 40X40X6 mm. having 04 Nos. corner supports of height 1.65 Meters including extended legs for grouting which will be used as a door for entry of the personnel or removal/shifting of transformer with welded hinges, sliding belt etc. for locking the arrangement as per drawing and specifications the fencing will be painted one coat of red oxide primer and then two coats of bus green synthetic enamel paint. The rates should be inclusive of all materials required for proper completion of above work (length of each fencing approx. 11 Meters) |
| 38 | Dismantling and removal of following material from the existing line and then stacking in the respective JE’s (Store) as per direction of Supervising Engineer. It includes the work of cartage, cost of labour, T&P carrier etc. required for proper completion of work. |
| 39 | ST Pole Scrap (04 Nos.) |
| 40 | Iron Scrap |
| 41 | 11KV VCB I/C & O/G |
| 42 | Copper Busbar Please Enable Macros to View BoQ information |
