Tender For Refurbishment Such As Repair/ Renovation To Physical Health Infrastructure At Chc Mandasahi In The District Of Jagatsinghpur For The Year 2025-26 For Implementation Of Ama Hospital(2Nd Phase), Jagatsinghpur-Odisha

TDR : 55743400

Tender Notice
BOQ

10 Days Left

Jagatsinghpur , Odisha

Tender Brief : Tender For Refurbishment Such As Repair/ Renovation To Physical Health Infrastructure At Chc Mandasahi In The District Of Jagatsinghpur For The Year 2025-26 For Implementation Of Ama Hospital(2Nd Phase)

Document Fees
₹ 10000 /-

EMD
₹ 300800.0 /-

Tender Value
₹ 3 Crore /-

Submission Date
09-06-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Civil work - Scraping Old paint with scraper including cost of all materials and labour etc complete as per specification and direction of Engineer in charge-Ground floor
2	1st floor
3	Dismantling and removing old lime or cement concrete under 3m height including stacking the useful materials for reuse and removing the debries with 50m lead etc complete as per specification and direction of Engineer in charge
4	Dismantling and removing doors, windows and ventilators including stacking the useful materials for reuse and removing the debries within 50m lead etc complete as per specification and direction of Engineer in charge
5	Dismantling GCI sheet or A.C. sheet roofing including stacking the useful materials for reuse and removing the debries within 50m lead etc complete as per specification and direction of Engineer in charge
6	Dismantling wrought and framed timber in roof frame work or floors including stacking the useful materials for reuse and removing the debries within 50m lead etc complete as per specification and direction of Engineer in charge
7	Dismantling brick or stone masonry in lime or cement mortar under 3m height including stacking the useful materials for reuse and removing the debries with 50m lead etc complete as per specification and direction of Engineer in charge
8	Dismantling and removing RCC Chajja, Shelves, fins and parapet including stacking the useful materials for reuse and removing the debries within 50m lead etc complete as per specification and direction of Engineer in charge
9	Carriage of surplus earth by mechanical means upto 5km lead including cost of all labour for loading and unloading chargeRCC s, transportation and spreading in layers at the dumping area etc complete as per specification and direction of Engineer in charge
10	Supplying and engaging 1 No. Hydraulic excavator 1 cum bucket capacity for levelling the bed including cost of labour, T&P etc. required for the work as per direction of Engineer in charge
11	Dismantling & removing 2.5 thick grading concrete including stacking the useful materials for reuse and removing the debries with 50m lead etc complete as per specification and direction of Engineer in charge
12	Construction of single under reamed bored compaction pile foundation of 300mm dia and 7.0m long with RCC M-25 using crushed broken hard granite chips of 20mm and down graded with required design with cost conveyance taxes cost of all materials and labour etc complete as per specification and direction of Engineer in charge
13	Earth work in excavation of foundation trenches in hard soil including dressing of sides and levelling the bed up to the required depth and depositing the excavated materials away from the work site within 50m initial lead & 1.5m initial lifts with sundries & T&P required for the work complete including cost of all labour,labour cess,T&P,sundries etc. as directed by the Engineer in charge.
14	Filling foundation and plinth with excavated earth well water and rammed in layers not exceeding 23cm in depth with all leads and lifts including cost conveyance taxes cost of all materials and labour etc complete as per specification and direction of Engineer in charge
15	Supplying of filling sand in foundation and plinth including watering,ramming, consolidating and dressing, labours, tools, taxes etc., all complete as per the specification and direction of Engineer-In-Charge.
16	Providing and laying plain cement concrete 1:3:6 (1 cement : 3 sand : 6 stone agregate 40mm nominal size) as levelling course in floor and plinth including tempering, curring, shuttering etc. complete all depth and height including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge.
17	Providing and laying plain cement concrete 1:2:4 in floor and plinth including tempering, curring, shuttering etc. complete all depth and height including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge.
18	1st class Fly ash Brick masonry using bricks of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per. Sqr. Cm. in cement mortar of mix( 1:6) with ordinary Portland slag cement(PSC) and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Foundation & Plinth including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-Charge.
19	Fly Ash. brick masonry of size 25 cm. x 12 cm. x 8 cm. having crushing strength not less than 75 kg. Per Sqr. Cm. in cement mortar of mix (1:6) with approved grade cement and screened & washed sand for mortar after immersing the bricks for 6 (Six) hours in water before use in Superstructure including splays cutting, circular moulding, corbelling, chamfering and similar such type of works, watering and curing etc. including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge-Ground floor
20	1st floor
21	2nd Floor
22	Brick work with Fly ash Bricks 25cm x 12cm x 8cm size having crushing strength not less than 75Kg/cm2 with dimensional tolerance ±2 percent in cement mortar (1:4) in Superstructure including watering curing, cost of carriage and royalty of all materials, taxes of all materials, cost of all labour, scaffolding, sundries, T&P required for the works etc. complete in all respect as directed by the Engineer-in-charge- Ground floor
23	RCC work M-25 grade as per approved designs and drawings having a minimum compressive strength (in work test) 25 N. / Square mm. in 15 cm. cubes at 28 days after mixing and test conducted in accordance with I.S. 456 and I.S. 516 using 12 mm. to 20 mm. size black hard crusher broken granite stone chips and screened and washed sharp sand for mortar of approved quality from approved quarry, washed and cleaned (20 mm. size chips not to exceed 25 % ) to be mixed in concrete mixture with approved grade cement including hoisting, lowering, laying and compacting concrete by using vibrators, watering and curing for 28 days, centring and shuttering and finishing the exposed surface smooth providing grooves or beads wherever necessary including cost, conveyance, loading, unloading, royalties and taxes of all materials and cost of all labours, sundries, T&P, required for the work etc. complete in all respect but excluding cost and conveyance of M.S. rods or Tor steel and binding wires and labour charges for straightening, cutting, bending etc. of M.S. rods or Tor steel tying the grills and placing in proper position as per direction of the Engineer in charge.-Pile cap
24	Plinth Beam
25	Column
26	1st floor
27	2nd floor
28	Lintel -Ground floor
29	1st floor
30	Chajjas- Ground floor
31	1st floor
32	Shelves- Ground floor
33	Roof beam -Ground floor
34	1st floor
35	2nd floor
36	Roof slab -Ground floor
37	1st floor
38	2nd floor
39	Staircase -Ground floor
40	1st floor
41	RCC drain bed
42	RCC wall
43	Cutting, straightening coiled or bent up M.S. Rod or tor steel of SAIL/ TATA / RINL (VIZAG) make including bending, binding, welding and joining if necessary and tying the grills and placing in position as required for R.C.C. Work and for providing fan hooks as required, hoisting, lowering, laying including cost, conveyances, taxes of M.S. Rod or tor steel and binding wires of 18 to 20 gauge and labour required for the work for bending, binding and tying the grills in all floors (Linear measurement will be taken and quantity will be calculated basing on the standard weight of B.I.S. for M.S. Rods or tor steel only. Wastage if any, including weight of binding wire will not be considered for measurement) etc. complete as per specification & direction of Engineer-in-charge.-Ground Floor.
44	1st floor
45	2nd floor
46	Providing 12 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface of walls(Outside wall) in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge. -Ground floor
47	1st floor
48	2nd floor
49	Providing 16 mm thick cement plaster with cement mortar of mix (1:6) with screened and washed sharp sand for mortar and finished smooth to the rough surface(Inside wall) of walls in all heights after racking out joints including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties of all materials with cost of all labour,labour cess, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.
50	1st floor
51	2nd floor
52	Providing 6 mm thick cement plaster with cement mortar of mix (1:4) with screened and washed sharp sand for mortar and finished smooth to R.C.C. work after closed deep chipping & slurry treatment including watering and curing, rounding of corners, providing grooves where ever necessary with cost, conveyance, royalties and taxes of all materials with cost of all labour, T&P, and scaffolding required for the work etc. complete in all respect as directed by the Engineer in charge.-Ground floor
53	1st floor
54	2nd floor
55	Supplying, fitting and fixing of Granite tiles upto 0.10 sqm 10 mm thick of approved make in floors on 20mm thick bed of C.M. (1:4)(1cement:4course sand) and filling the joint with white cement mixed with pigment to match the shades of the tileincluding cost of all materials, labour, labour cess, T&P etc. required for the work complete in all respect as directed by the Engineer in charge.-Ground floor
56	Supplying, fitting and fixing of Vitrified tiles of premium grade having thickness 8mm to 10mm confirming to IS 13756 of size 600mm x 600mm Plain (Ivory) of approved make in floors on 20mm thick bed of C.M. (1:4)(1cement:4course sand) and filling the joint with white cement mixed with pigment to match the shades of the tileincluding cost of all materials, labour, labour cess, T&P etc. required for the work complete in all respect as directed by the Engineer in charge.-Ground floor
57	1st floor
58	Providing, fitting, fixing vitrified tiles of premium grade having thickness 8mm to 10mm confirming to IS 13756 of size 600mm x 600mm Plain (Ivory) of approved make as directed by Engineer-in-charge in dados skirting and risers of steps on 12mm thick cement plaster (1:3) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties of all materials all labour,labour cess complete in all respects.-Ground floor
59	Providing fitting and fixing of Ceramic glazed tiles in wall of approved make over12mm thick bed of cement mortar(1:3) jointed with neat cement slurry mixed with pigment to match the shades of tiles including cost, conveyances, royalties of materials and cost of all labour with T&P required for the work etc, complete as per specification & direction of the Engineer-in-charge -GF
60	1st floor
61	Providing, fitting, fixing vitrified industrial tiles of premium grade having thickness 8mm to 10mm confirming to IS 4457 of size 300mm x 300mm in floor on 20mm thick cement plaster (1:4) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including rubbing and polishing etc. complete with cost, conveyance, royalties of all materials all labour,labour cess complete in all respects.-Ground floor
62	1st floor
63	Supplying, fitting and fixing in position chequered tile of approved make and quality, colour and size in all floors at all height on 20mm thick bed of cement mortar of mix (1:4) laid in proper slope and gradient with screened and washed sharp sand for mortar and with Portland Slag Cement (PSC) grouted with neat white cement slurry with required quantities of pigments of approved marks watering and curing for 21 days, including cost, conveyance, loading, unloading, royalties and taxes of all materials, cost of all labour, sundries, T&P required for the work complete in all respect as directed by the Engineer-in-charge
64	Finishing plastered surfaces of walls with cement based wall putty (Water based) of approved make and finishing the surface smooth and even by sand papering to receive painting in walls, at all heights with staging wherever necessary with cost, conveyance, cost of all labour,labourcess, all T&P etc. required for the work complete in all respect as per the direction of the Engineer-in-charge. -Ground floor
65	1st floor
66	2nd floor
67	Wall painting two coats with Antifungal weather coat paint (1st quality) exterior grade of approved make & approved shade over a coat of primer to make an even finished surface in all floors and heights with all scaffolding and staging charges including cost, conveyance, cost of all labours, T & P, sundries etc. as required for the work complete in all respect as per the direction of the Engineer-in-Charge.-Ground floor
68	1st floor
69	2nd floor
70	Painting two coats with plastic emulsion paint with a approved quality primer to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, cost of all labour,labour cess, T&P etc. complete as per the direction of the Engineer-in-charge.-Ground floor
71	1st floor
72	2nd floor
73	Painting two coats with distemper with a approved quality primer to make an even finished surface in all floors and heights to wall surface of approved make and shade including sand papering, applying putty wherever necessary & cost of scaffolding, staging charges with cost, conveyance, cost of all labour,labour cess, T&P etc. complete as per the direction of the Engineer-in-charge.-Ground floor
74	Painting two coat with approved synthetic enamel paint to new iron/wood work over a coat of Red oxide primer including cost, conveyances, royalties, taxes of all materials and cost of all labour with T&P required for the work etc. complete as per specification & direction of Engineer in charge.-Ground floor
75	1st floor
76	2nd floor
77	Supplying, fitting and fixing of 32mm thick flush door shutter with approved quality of 30mm thick BWR block board pasted with 1mm thick sunmica on both side of approved design and quality including cost of all door fittings and fixtures etc. complete in all respect as per the direction of the Engineer-in-Charge.
78	Providing and fixing of factory made 100% solid WPC (Wood Polymer Composite) Door frame of frame size 65x125mm single Rebeted, made from Wood Polymer Composite (Single extracted process) material comprising of virgin PVC polymer of K Value 57-60 (Suspension Grade), Calcium Carbonate and Natural Fibers (Wood powder / Rice Husk / Wheat Husk) and Non tosxic additives fabricated with meter joints after applying PVC solvent Cement & screwed with full body treaded star headed screws having minimum frame density of 780 kg./cbm & an ISO 9001 -2015 certified company, having good screw holding capacity (screw withdrawal strength of (Min 990 N), Minimum Compressive strength of 58 N/mm2, Modulus of elasticity 900N/mm2 and resistance to spread of flame of class. A category with property of being termite / borer proof, water / moisture proof & fire retardant & fixed in position with SS Dash Fasteners / Hold fast of required dia and length all as per specifications drawings of approved quality including cost, conveyance etc complete as per specification and direction of Engineer in charge. Material test certificate and authentication should be compulsory provided by the manufacturing company
79	Supplying , fitting and fixing of two track UPVC sliding window of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures in all respect including cost of materials, conveyance, loading & unloading and taxes of all materials and cost of all labour, sundries, T & P etc. required for all the work complete as per the directions of Engineer -in-charge.
80	Supplying fitting and fixing of UPVC (FENESTA/ NCL/VEKALTD casement window with top fixed 60 series duly manufactured using UPVC reinforced profile of 60mmx55mmx2.5mm for outer frame 75mmx60mmx2.25mm for casement window sash profile and 74mmx60mmx2.5mm mullian profile capable of mounting single glazing system etc complete as per direction and specification of Engineer in charge
81	Supplying , fitting and fixing of two track UPVC door of approved make with 6mm thick glass of approved quality complete with frame, shutters and all fitting and fixtures in all respect including cost of materials, conveyance, loading & unloading and taxes of all materials and cost of all labour, sundries, T & P etc. required for all the work complete as per the directions of Engineer -in-charge.
82	Supplying fitting and fixing of UPVC (FINESTA/ NCL/VEKALTD casement door 60 series duly manufactured using UPVC reinforced profile of 60mmx55mmx2.5mm for outer frame 102mmx60mmx2.25mm for casement door sash profile and 74mmx60mmx2.5mm mullian profile capable of mounting single glazing system etc complete as per direction and specification of Engineer in charge
83	Supplying, fitting & fixing in all floors of M.S. grills, grill gates, M.S. gates, garage door, collapsible gates with top and bottom rails, steel windows, critical frames for windows, stair case and parapet railing made out of M.S Square bar/ flat including stair case hand railing with 40mm. dia G.I.pipe etc. including painting two coats over a coat of redoxide primer as per approved drawing and design with cost of all materials & labour, labour cess, T&P, sundries etc. complete in all respect as per specification & direction of the Engineer-in-Charge.
84	Supplying, fitting and fixing of stainless steel of 304 grade in hand railing using 50 mm dia of 2 mm thick circular pipe with Balustrade of size 32 mm x 32mm x 2mm @ 0.90 mtr C/C and stainless aquare pipe bracing of size case as per approved design and specification, buffing, polishing etc. with the cost, conveyance taxses of all material, cost of all labour etc. complete in all respect as per specification & direction of Engineer in charge.
85	Providing average 25mm thick grading Concrete with (1:2:2) using 6mm hard granite chips using 2% water proofing cement compound of approved quality over top of Roof, Terrace, including cost of scaffolding, scraping and cleaning the roof surface, plastering and finishing smooth to proper slope and gradient including cost of all materials, conveyance, taxes and sundries, T&P etc. All complete in all respect as per direction of the Engineer -in-charge.
86	Providing fitting fixing of false ceiling with Aluminium anodised T section No.3215 with 2'0\\" center to center, L section No.1705 on 4 walls to be fixed by means of steel screw and P.V.C. plug and the Aluminium grid 2'0\\"x2'0\\" with 12mm thick Prelaminated Particle Board suspended from ceiling including cost of all materials, labour T&P etc required for the work all complete as per direction of the Engineer-in-charge
87	Supplying, fitting and fixing of G.I.Pipes including cost of all materials, labour, conveyance, taxes, loading, unloading, T&P, etc. all complete as per direction and specification of Engineer in charge
88	EI works - Recessed wiring to light point/Fan point/ Exhaust fan point/Call bell point with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked with 20 mm dia non-metallic PVC flexible conduit with 5Amp, 250V Modular type switch ISI marked and ceiling rose ISI marked mounted on MS box having front bakelite cover of suitable size, MS box with 1.5 sq.mm FR PVC insulated single core multistrand copper conductor as earth wire including all accessories and connection (Make of wire FRLS-Finolex/L&T/Anchor/Havells/V-Guard/HPL)Group A L.P.-21
89	Group B L.P.-40 F.P-80
90	Group C L.P.-49 F.P-40 E.F.P-10
91	Supply and fixing of 6Amp plug with 6Amp switch on existing board( Legrand mylinc/ Schneider clipsal/Hager insysta/Anchor Dura/ or equivalent)
92	Supply and fixing of Modular metal box on surface or in recess with suitable size of Modular cover in front including providing and fixing of 6Amp and 6Amp Modular switches connection ( Legrand mylinc/ Schneider clipsal/Hager insysta/Anchor Dura/ or equivalent )
93	Supply and fixing of Modular metal box on surface or in recess with suitable size of Modular cover in front including providing and fixing of 6pin 6amp, 16Amp socket outlet and 16Amp Modular switches connection ( Legrand mylinc/ Schneider clipsal/Hager insysta/Anchor Dura/ or equivalent)
94	S/F of Multipurpose board consisting 3nos. 6Amp plug and switch and 15/16amp plug and switch Modular on metal box and Modular cover with all connections( Legrand mylinc/ Schneider clipsal/Hager insysta/Anchor Dura/ or equivalent)
95	S/F of Multipurpose board consisting 3nos. 6Amp plug and switch Modular on metal box and Modular cover with all connections ( Legrand mylinc/ Schneider clipsal/Hager insysta/Anchor Dura/ or equivalent)
96	Ac Point with 20A Plug and socket with provision for mounting of 20A SP MCB for flush mounting and surface mounting including SP MCB (Legrand/ or equavalent)
97	S/F of electronic step type modular Fan Regulator capacitor control ISI Marked with all connection complete in all respect as per direction of Engineer in charge(Make-Usha/Anchor/Cona)
98	Recessed wiring to submain in the following sq.mm FR PVC insulated single core multistrand copper conductor of ISI marked conforming to IS-694/1990 in the following mm dia non-metallic heavy duty flexible conduit 1.6 mm thick along with the following sq.mm FR PVC insulated single core multistrand copper conductor as earth wire as required FRLS.(Make of wire-Finolex/L&T/Anchor/Havells/V-Guard//HPL)2 X 1.5 sq.mm +1 X 1.5 sq.mm 20 mm dia
99	2 X 2.5sq.mm +1 X 1.5 sq.mm 20 mm dia
100	2 X4 sq.mm +1 X 1.5 sq.mm -do-
101	2 X6 sq.mm +1 X 2.5 sq.mm -do-
102	4 X10 sq.mm +2 X4 sq.mm -do-
103	4x16sq.mm+2x10sq.mm
104	Supply and fixing of following way single pole and neutral sheet steel MCB distribution board 250V on surface/recess complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, detachable gland plate, interconnections, phosphatized and powder painted including earthing etc. as required (but with out MCB/ RCCB/ Isolator) make-HPL/ Havells/ Legrand /L&T/C&S.) (8+24)way TPN Double door DB
105	(4+12)way TPN Double door DB
106	Supply and Fixing of 8 way, DD DB ( Make-Havells/ L&T/Legrand)
107	63A FP MCB \\"C\\" Series
108	40Amp.DP MCB C series
109	25 A SP MCB C Series (make-Legrand/Havells/ L & T)
110	16A SP MCB C Series (make-Legrand/Havells/ L & T)
111	S/F of 20Watt LED tube light Fitting(4ft) (Make-Havells/ Philips/Bajaj/Crompton/panasonic
112	S/F of (2''x2'') square ceiling light( Make- Bajaj/ Havells/ Crompton/ Philips/Orient)
113	S/F of 60 Watt street light with GI Bracket (Make-Havells/ Philips/Bajaj/Crompton/panasonic/orient)
114	Supply & Fixing of A.C Ceiling fan 48\\" size. (Make-Havells-BLDC)
115	Supply Fixing of Exhaust fan 10/12\\" size(make-/ Havells/Usha/almonard)
116	Fixing of Exhaust fan10\\"/ 12\\" size
117	Supply/ Fixing of 16'' wall mounted Fan High speed(Make-Usha-Striker/Havels Platina)
118	Supply and fixing of 3 module Cover
119	Supply and fixing of 5 Amp Modular switch ( Make- Anchor/ cona/Havells)
120	Supply and fixing of 5 Amp Modular socket ( Make- Anchor/ cona/Havells)
121	Supply and fixing of 16 Amp Modular switch ( Make- Anchor/ cona/Havells)
122	Supply and fixing of 16 Amp Modular socket ( Make- Anchor/ cona/Havells)
123	S/F of 2.5MFD Fan Capacitor( Make-Havells)
124	Supply of 95 sq.mmx3.5core Alluminium Armoured Cable (Make-Glowstar/ Polycab/ Nicco/KEI/HPL/ Mescab)
125	Supply of 50 sq.mmx3.5core Alluminium Armoured Cable (Make-Glowstar/ Polycab/ Nicco/KEI/HPL/ Mescab)
126	Laying of cable on surface and fixing of one number of PVC insulated and PVC sheathed/ XLPE power cable of 1.1KV grade of size exceeding 25 sq.mm on surface as required.
127	Supply and fixing copper plate earthing 600 mm X 600 mm X 3.15 mm thick ISI marked including accessories and providing masonary with charcoal and salt as required.
128	Supply and laying 25mm×5mm copper earth strip in recess for connection etc as required
129	Supply and Fixing of Copper Earth Busbar
130	Supply of 25 KVA, single phase DG set with AMF pannel (Make-Kirloskar/Cummins/Volvo/Mahindra)
131	Installation , Testing and Commissiong of DG Set including 90 mtr cable, Changeover, Foundation, Earthing & shed of DG Set
132	Supply of 09 mtr. HDG Octagonal G.I. Pole at resist the basic wind speed upto 160 Km / hr. Top dia 70 mm, bottom 175mm thick 3mm . The base plate dimension is 275 size(4x24dia), Pitch size 275mm ( Make- Utkarsh/ Consoul/ Bajaj/ Valmont/Lyshat/Jaquar)
133	Supply of four arms G.I Structure welded with top canopy at an angle of 90 degree suitable for the above pole. the outer diameter of arms are of 75 mm G.I nut bolts are to provitded on canopy to fix the arm rigidly on 9 Mtr. galvanized Octagonal Pole ( Make- Consoul/Utkarsh/ Bajaj/ Valmont/Lyshat/Jaquar)
134	Supply of Pannel Box with 6 Amp.to 10Amp. SP MCB incomer and connector with busbar, incoming 2.5sq.mm three copper Flexible cable.
135	Supply & fixing of 150 watt LED Flood light ,made up of pressure Dia-cast housing with toughned glass and individual high power LEDs with secondary optics , Ingress Protection, ( Make-Havells/Philips/Bajaj/ Orient /Crompton/ Jaquar)
136	S/F service connection wire with 4mmsq twin core unbound aluminium wire with G.I wire 10/12 SWG with G.I hook from pole to Junction Box
137	Supply of 2.5sqmm x 3 core multistrand ISI marked copper Unarmoured cable for connection of street light to junction box Make-polycab/Havells)
138	S/F of Earthing with medium class 40mm 3Mtr. Long ISI marked GI Earth pipe including accessories and providing Masonary enclosure with cover plate locking arrangement and watering pipe etc. with25mmx5mm G.I earth strip as per Govt. Spcn.
139	Construction of foundation with M20 grade concrete for the mini Highmast considering the safe soil bearing capacity at site as 10 T/sqmtr at 1.5mtr./2mtr. Depth with all materials and labour. Depth and concrete base is (2x2)ft. with all materials and labour ,base plate size(750mmx750mmx15mm)
140	Erection of the high mast with the help of suitable equipments and wiring of luminaires with all wiring materials and labour.
141	Supply of 1.5 Ton 3 Star 18K Split type AC machine (Make:-Voltage/ Carrier/Blue Star/ Hitachi)
142	Supply and Fixing of 4KVA Voltage Stabilizerfor AC (130V-290V)Make-V-Guard/ Microtech/Autotech)
143	S/F of Nylon Netted Drain Pipe with C clamp
144	S/F of extra copper cooling pipe with insulation packing and flexible cord for power supply to outdoor unit complete in all respect as per direction of engineer in Charge
145	S/F of Powder Coated wall Stand for outdoor Unit Anchor Fastener (for 1.5 Ton/ 2 Ton)
146	Cost of 16/ 18 SWG panel box 2x(36x10)+(10x48)+(36x48) sq. inch for single door made out of CR sheet of 16/ 18 SWG and boarder angle frame to provide above pannel with proper space ,hinges, and other accessories , hinged door etc.
147	Provision of internal wiring to equipment installed in the pannel board with required size of copper multistrand single core cables duly crimped with copper lugs and all connections 2x(Lxb)+(bxh)+(Lxh) including cost of copper conductor and other fittings like gasket ,screw , nut and bolt , insulating materials etc.
148	Cost of Powder Coating 4 x (Lxb)+(bxh)+(Lxh)
149	S/F of bus bar 50 x 5 mm with required size of insulating material and nut and bolts.
150	S/F of bus bar 35 x 5 mm with required size of insulating material and nut and bolts.
151	S/F of 315 amp 36KA MCCB 4 pole (Make-Havells/L&T/or equivalent)
152	S/F of 125 amp 25KA 4 pole MCB (Make-Havells/L&T/or equivalent)
153	S/F of 100 amp changeover (Make-Havells/L&T/or equivalent)
154	s/F of 100 Amp 4 way Busbar chamber with copper strip(Make-Havells/L&T/or equivalent)
155	Supply and fixing of Ammeter with selector switch including all connections (0A-500A)
156	Supply and fixing of voltmeter with selector switch including all connections (0-500V)
157	Supply and fixing of Indicator lamp with toggler switch and fuse
158	Supply and fixing of C.T coil upto 400Amp including all connections
159	Installation, testing and commissioning of above MCCB pannel board with danger board and Shifting
160	Supply & Fixing of 43\\" LED TV Unit(Make- SONY/LG/SAMSUNG)
161	PH works - Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor c-pvc pipes and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge. In Ground Floor20mm dia 'C' PVC pipe
162	25mm dia C-PVC Pipes
163	40mm dia C-PVC Pipes
164	50mm dia C-PVC Pipes
165	25mm dia HDPE pipe
166	Supplying all materials, labour, T&P and providing and fixing to wall or ceiling and floor pvc pipes conforming to ASTM-D-1785/89 (Sch-80) and pipe fittings of the following nominal bore with clamps including making good the wall, ceiling and floor all complete as per specification and direction of the Engineer in charge.In ground floor25mm dia UPVC ASTM-D Pipes
167	40mm dia UPVC ASTM-D Pipes
168	50mm dia UPVC ASTM-D Pipes
169	Supplying all materials, labour, T&P and cutting holes through existing brick work including making good the damages in cement mortar (1:4) for taking GI pipes and fittings/ PVC pipes and fittings etc all complete as per PH specification and direction of the Engineer in charge.250mm thick wall In Ground Floor
170	Supplying all materials, labour, T&P and cutting grooves in pucca floors and walls for taking GI/ PVC pipes and making good the damages as per the direction of the Engineer in charge.In Ground Floor floor
171	Supplying all materials, labour, T&P and fitting and fixing brass/CP fittings of the following nominal bore with supply of all jointing materials complete as per specification and direction of the Engineer in charge.15mm dia CP two way bib cock(CON-CHR-041KN)
172	15 mm dia CP S.B. Bib cock(CON-CHR-037KN)
173	15 mm dia CP L.B. Bib cock(CON-CHR-107KN)
174	15mm dia CP angle stop cock(CON-CHR-053KN)
175	20mm dia CP Con. stop cock (CON-CHR-089KN)
176	15 mm dia CP Elbow Action Bib cock (Plaza/Aquiatic/Amber)
177	Pillar Cock with Lev. Handle for Elbow Ope. (FLR-CHR-5031)
178	15mm dia C.P Pillar cock(CON-CHR-021KN)
179	15mm dia CP flange
180	15mm Cp extention piece
181	25mm brass full way valve
182	40mm brass full way valve
183	50mm brass full way valve
184	125mmdia C.P.grating
185	Over Head Shower 100mm dia round with Arm (OHS-CHR1999) + (SHA-CHR-477)
186	15mm dia CP hand shower with reebit cleaning system (ABC chrome plated-Jaquar make-HSH-CHR-85537)
187	600mm X 125mm C.P glass shelf (ACN -CHR-1171N)
188	CP towel rail (25 mm)(ACN-CHR-1111N)
189	C.P towel ring(ACN-CHR-1121NMI)
190	CP Soap dish Holder (ACN-CHR-1131N)
191	Supplying all materials, labour, T&P and providing & electrification to submerssible pump sets and service connection including fitting fixing of electric board & Switch etc all complete as per direction of the Engineer in charge.
192	Matrix Set -1 (WB 65 x 35 with one pair mounting brackets, EWC & Cistern complete with fittings & seat cover, one no hinged rail 76 cm and five nos of grab rails 60 cm)
193	Supplying all materials, labour, T&P and fitting and fixing 10 litres capacity low level flushing cistern with a pair of cast iron or M.S brackets complete with fittings such as siphonic arrangements 15mm nominal size brass/pvc ball valve with polythene float CP brass handle, unions and couplings for connection with inlet, outlet and overflow pipes,32mm dia CP flush bend,15mm dia pvc inlet connection pipe including cutting holes and making good the same and connecting the flush bend with cistern and closet and connecting the inlet pipe with supply main etc all complete as per specification and direction of the Engineer in charge.10 litres capacity pvc low level cistern (Slimline-white)
194	Supplying all materials,labour,T&P and fixing Rotational moulded polyethylene cylindrical vertical water storage tanks including cutting holes through the tank and fixing mild steel tubes and fittings and providing extra sockets and jam nuts, fixing ball valve etc, including hoisting upto a height of 5 metres above ground level and placing the tank to the required position and providing 1st class K.B brickwork in cement mortar (1:6) of 0.46m height in staging and in circular protection wall to support the tank, 12mm thick cement plaster (1:6) over brickwork, R.C.C slab of size 1.60mx1.60m and 0.10m thick, R.C.C beam of 0.25mx0.30m and 3.18m average length in cement concrete(1:2:4) using 12mm size h.g chips including centering and shuttering, watering, curing, conveyance of all materials to worksite etc all complete as per specification and direction of the Engineer in charge2000litre capacity water storage tanks(Sintex make) (In 1st Floor)
195	1000litre capacity water storage tanks(Sintex make) (In 1st Floor)
196	Supplying all materials, labour, T&P and providing fitting and fixing Aquaguard PRO Thermapure 120 PSS RO ACH which gives you Hot,Cold & Ambient purified water.Aquaguard PEO Thermapure 120 PSS RO has built-in-3 stage combinations,Tank Capacity 120Ltr.,Cold Water-80 Ltrs,Hot water-20 Ltrs.,Ambient water-2- Ltrs.,Cooling capacity-60 LPH,Refrigerant-HFC R134a,Cold water temperature-15 Deg.C+/-1,Heating coil wattage-2000W,Hot water temperature-50 Deg C+/-1,Thermal insulation-PUF,No of Faucets-1 Hot,1 Cold,1 Ambient,Tank,front panel and drain tray MOC-SS304,Other body panels-Powder coated CRCA Steel,No of filtration stages-7,RO Capacity-50 LPH,RORecovery%-50%,TDS Reject-90%,Dimentions(WxDxH)cm-75x72x144,Net weight-92 Kg.etc.all complete as per direction of the Engineer-in-charge.
197	Supplying all materials, labour, T&P and providing fitting and fixing (Aqua guard) Pure Chill 120 PSS UV of size 750x570x1350mm height with water storage capacity 120 liters along with 3 nos of faucets 2 for cold water and 1 for normal water including a flow of 1.5 ltr per minute etc all complete as per approved drawing,specification and direction of the Engineer in charge.
198	Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer’s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge110mm dia U-PVC SWR pipes(Supreme/Ashirvad)
199	110mm U-PVC door Tee
200	110mm U-PVC door cross Tee
201	110mm U-PVC plain Tee
202	110mm U-PVC door bend
203	110mm U-PVC plain bend
204	110mm dia U-PVC off set
205	110mm dia U-PVC 'P' trap
206	110mm dia U-PVC cowl
207	110mm dia U-PVC clamp
208	50mm dia UPVC class-IV pipes
209	Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking HCI/PVC SWR pipes and fittings including making good the damages etc all complete as per PH specification and direction of the Engineer in charge250mm to 375mm thick wall
210	Supplying all materials, labour, T&P and fixing vitreous china water closet, squatting pan (Indian type W.C pan/Orissa pattern squatting pan) duly embedded in cement concrete (1:5:10) using 4cm size hard granite metal including fixing a pair of vitreous china 250mm x 130mm x 30mm footrest, fixing 100mm dia HCI ‘P’ or ‘S’ trap (with/without 50mm dia horn) for water closet squatting pan including jointing the trap with pan in cement mortar (1:1), cutting the floor and mending good the damages etc all complete as per specification and direction of the Engineer in charge580mm size Orissa pan (Parryware/Cera/ Nycer Make)
211	Supplying all materials, labour, T&P and fixing the following vitreous china Wash Down Water Closet (European type W.C pan) with integral ‘P’or ‘S’ trap to the floor with wooden plug and chromium plated pedestal screws including jointing the trap with soil pipe in cement mortar (1:1), fixing plastic seat and cover for wash down water closet with chromium plated brass hinges and rubber buffers including polishing etc all complete as per specification and direction of the Engineer in chargea.European water closet with ‘S’ trap plain (Parrywere/Hindware/Nicer Make)
212	Supplying all materials, labour, T&P and fixing glazed earthenware squatting plate with integral longitudinal flushing pipe including embedding the plate in 25mm cement mortar (1:8) laid over 150mm cement concrete (1:5:10) using 40mm hard granite metal all complete as per specification and direction of the Engineer in chargeSquatting urinal (Parryware make)
213	Supplying all materials, labour, T&P and fixing bowl pattern urinal of the following sizes including connecting the urinal with 32mm dia pvc waste pipe 910mm long by means of white lead mixed with chopped hemp, fixing 32mm dia CP dome waste, 15mm dia CP spreader including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc all complete as per specification and direction of the Engineer in charge.Half stall urinal (Jaquar)URS-WHT-13261
214	15mm CP spreader
215	32mm CP doom waste
216	Supplying all materials, labour, T&P and fixing wash kitchen sink/laboratory sink with outlet at end and weir overflow including fitting and fixing a pair of cast iron or MS brackets painted white, fixing 50mm/40mm dia CP brass waste, fixing 50mm/40mm dia PVC waste pipe 910mm long with supply of wooden plugs, screws and cement etc including cutting holes in walls and making good the damages etc all complete as per specification and direction of the Engineer in charge600x450x250 mm stainless steel kitchen sink-glossy-IS:13983 - 1994 (Jayna make)
217	600mmx450mmx250mm size porcelain Sink
218	Supplying all materials, labour, T&P and fixing wash basins with hole for pillar taps with cast iron or M S brackets painted white including cutting holes in walls and making good the damages with supply of wooden plugs, screws and cement etc, fixing pedestal for wash basin recessed at the back for the reception of pipes and fittings, fixing PVC waste pipe of 32mm nominal diameter for wash basin including brass check nut complete, fixing pillar taps(Plaza make) capstan head screw down high pressure lettered ‘Hot’ and ‘Cold’ with long screws, shanks and back nuts of 15mm dia nominal bore, fixing 15mm dia PVC inlet connection pipe and making connection with pillar cocks and supply mains for wash basin, fixing 32mm dia CP brass waste, etc all complete as per specification and direction of the Engineer in charge550mmx400mm size wash hand basin with Pedestall (Parryware)
219	Supplying all materials, labour, T&P and fixing mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with CP screws and washers complete as per specification an direction of the Engineer in charge600mmx450mm size B.E mirror
220	Supplying all materials,labour,T&P and dismantling the damaged squatting type water closet and urinal plates etc and mending good the damages to the floors and removing the debris at a safe distance as per direction of the Engineer in chargeSquatting type water closet
221	Damaged EWC, AIWC, basin, cistern
222	Dismantling and removing doors, windows and ventilators including removal of frame, hinges, fastening and stacking of the useful materials for reuse and removing the debris within 50 m lead etc all complete as per specification and direction of the Engineer in charge
223	Dismantling and removing old tile flooring including stacking the useful materials for reuse and removing the debris within 50 m lead etc all complete as per specification and direction of the Engineer in charge.
224	Dismantling and removing old tile dado from walls including racking out joints 12mm deep and removing the debris within 50 m lead etc all complete as per specification and direction of the Engineer in charge
225	Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc.all complete as per direction of the Engineer in charge.
226	Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
227	Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in chargeIn ground floor
228	Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge12mm thick CP (1:4) on bw- In Gf(inside/outside)
229	Fitting and fixing vetrified tiles Kajaria on floors or steps & landing on 25mm. thick bed of cement mortar (1:1) jointed with neat cement slurry mixed with pigment to match the shades of the tiles including cost conveyance, royalities and taxes etc. all complete as per direction of Engineer in charge. (Ceramic floor tiles of premium grade Kajaria / Jonshon/Somany make of size 600x600mm to be pre-approved by the Engineer in charge) In Ground Floor
230	Fitting and fixing vetrified tiles of Kajaria to dados skirting & risers of steps on 12mm. thick C.P (1:3) jointed with neat cement slurry mixed with pigments to match the shade of tiles including cost conveyance, royalities and taxes etc. all complete as per direction of Engineer in charge. (Ceramic wall tiles of Size 600x300mm premium grade Kajaria / Somany make special plain / printed series to be pre-approved by the Engineer in charge)In Ground Floor
231	Supplying and fitting-fixing of Un-plasticised Poly Vinyl Chloride (UPVC) (FENESTA / NCL VEKA LTD) Casement Toilet Door – 60- Series duly manufactured using UPVC reinforced profiles of 60 mm x 55 mmx2.5 mm for outer frames, 102 mm x 60 mm x 2.25 mm for casement Door Sash Profile and 74 mm x 60 mm x 2.5mm mullion profile capable of mounting single glazing system, structurally reinforced with hot dip galvanised up to 50 microns of minimum thickness of 2.0 mm prefabricated & welded through fusion welding.The Door sash shall be fitted with 12mm thick WPC Board of Greenply/Rajshree make duly fixed with EPDM weathering seal resistant accessories like Bathroom locking system made of aluminium 1 No., per set of sashes and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges. The materials and product confirming to ASTM D 638-14, EN-477-95 and other applicable codes and standards
232	Providing fitting, fixing of Al. door with OEL anodized Al. door section of 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member and 12mm thick pre-laminated board fixed on door frame by means of tapered clip No. 4660 and the frame to be completed by means of jointing angle No. 1855 including all cost of labour,T&P , hire charges of drilling machine,labour charges etc. complete.
233	Supplying all materials, labour, T&P and distempering two coats to walls with distemper of approved shade on new work to give an even shade etc all complete as per specification and direction of the Engineer in charge
234	Supplying all materials, labour, T&P and constructing gully trap chamber of the following inside size with 8cm thick R.C.C precast cover slab in cement concrete (1:1.5:3) mix using 12mm size h.g chips, foundation concrete (1:4:8) using 40mm size hard granite metal on bed and around trap, fly ash bricks in cement mortar (1:6) in F&P and inside 12mm thick cement plastering (1:3) finished with a floating coat of neat cement including fixing 100mmx100mm size HCI/P-trap gully trap,150mmx150mm size CI grating etc all complete as per approved drawing, specification and direction of the Engineer in chargeInside size 250mmx250mm
235	Supplying all materials, labour, T&P and constructing inspection chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips, 12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in chargeInside size 760mmx760mmx460mm
236	Reconstruction of Inspection chamber
237	Supplying all materials, labour, T&P and constructing man hole chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class K.B brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips,12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, R.C.C cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in chargeInside size 910mmx910mmx910mm
238	Supplying all materials, labour, T&P and constructing soakway pit of the following size with precast RCC rings joined loose, gravel backing in the rear of well steining, precast RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including cutting hole in the rings for inlet pipe,earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge 1.22m dia x 2.10m deep soakway pit
239	Supplying all materials, labour, T&P and providing 450mm dia x 50mm thick RCPC man hole cover in cement concrete (1:2:4) using 12mm size h.g chips, placing the cover on the man hole/ inspection chamber and finishing smooth all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification and direction of the Engineer in chargeR.C.P.C. Cover(20\\"/22\\" round Man hole cover)
240	Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge.110mm dia u-pvc pipe alround concrete
241	160mm dia u-pvc pipe alround concrete
242	Supplying all materials, labour, T&P and cleaning choked inspection chamber/man hole chamber/sewer line/septic tank by engaging sweeper using bamboo and disposing sewage at a safe distance all complete as per direction of the Engineer in charge a.Sweeper
243	Supplying all materials ,labour for removing of sludge from septic tank and disposing them at a suitable distance by engaging sweeper using cess pool truck through biring at a safe distance etc.all complete as per direction of the Engineer-in-charge
244	Construction of 20 users Brick Septic tankEarth work in excavation of foundation in all kinds of soil within 50m initial lead and 1.5m initial lift including rough dressing & breaking clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth and as per direction of the Engineer-in-Charge.
245	Extra lifts of 1.50 mtr or part thereof over the initial lift of 1.5 mtr in all kinds of embankments and road works and ordinary earthwork in general.
246	Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in chargeIn ground floor
247	Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12m size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in chargeIn ground floor
248	Supplying all materials, labour, T&P and providing brick work with K.B bricks having crushing strength not less than 75kg/cm² with dimensional tolerance ± 8 percent in cement mortar (1:4) including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in chargeIn F&P
249	Supplying all materials, labour, T&P and providing 12mm thick cement plaster (1:4) on brickwork including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
250	Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in chargeIn ground floor
251	Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge R.C.C floor and roof slabs
252	Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in chargeIn ground floor
253	Supplying all materials, labour, T&P and providing cement concrete (1:1.5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in chargeIn ground floor
254	Supplying all materials, labour, T&P and providing,fitting and fixing 100mm x 100mm x 100mm SW Tee in wall including filling the recess with cement concrete (1:3:6) with 12mm size h.g chips all complete including watering, curing, conveyance of all materials to worksite, payment of royalty all complete as per specification and direction of the Engineer in charge
255	Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge
256	Construction of 30 users RCC septic tank (I/S size-3.00mx1.20mx2.10m) Earth work in excavation of foundation in all kinds of soil within 50 mtr initial lead and 1.5mtr initial lift including rough dressing and levelling the bed and as per direction of the Engineer in charge.
257	Extra lifts of 1.50 mtr or part thereof over the initial lift of 1.5 mtr in all kinds of embankments and road works and ordinary earthwork in general.
258	Supplying all materials, labour, T&P and filling in foundation and plinth with sand well watered and rammed including conveyance of all materials to worksite, payment of royalty, taxes etc.all complete as per direction of the Engineer in charge.
259	Supplying all materials, labour, T&P and providing cement concrete (1:3:6) with 4cm size hard granite metal including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge
260	Supplying all materials, labour, T&P and providing rigid and smooth centering and shuttering for R.C.C works including false work and dismantling them after casting including conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in chargeR.C.C floor and roof slabs up to 4.30m height
261	Supplying all materials, labour, T&P and providing M.S reinforcement for R.C.C work including cutting, bending, binding, and tying the grills and placing in position including cost of binding wire 18 to 20 gauge, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in chargeIn ground floor
262	Supplying all materials, labour, T&P and providing cement concrete (1:1.5:3) with 12mm size hard broken granite chips for R.C.C works including hoisting, laying, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in charge.In ground floor
263	Supplying all materials, labour, T&P and providing cement concrete (1:2:4) with 12mm size hard broken granite chips including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in chargeIn ground floor
264	Supplying all materials, labour, T&P and providing 6mm thick cement plaster (1:4) on RCC work including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in chargeIn ground floor (inside)
265	Supplying all materials, labour, T&P and providing cement punning including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per specification and direction of the Engineer in chargeIn ground floor (inside)
266	Supplying all materials, labour, T&P and making MS step iron in 20mm diameter MS steel bars and fixing into walls of man hole/septic tank duly embedded in cement concrete (1:3:6) complete as per specification and direction of the Engineer in charge.
267	Filling in foundation and plinth with excavated materials, moorum including watering and ramming as directed by the Engineer in charge
268	Supplying all materials, labour, T&P and fitting and fixing H.C.I/U-PVC soil waste ventilating pipes and fittings to walls with nails, bobbins and wooden plugs or laying in trenches including earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the engineer in charge110mm diameter U-PVC pipes
269	110mm dia U-PVC Plain bend
270	110mm dia U-PVC cowl
271	(Sinking of 150mm size tube well through hand boring( water jet) method)Suplying all materials, labour, T&P and setting up boring equipments including erection of suitable staging for installation of the required size of tube well, dismantling and removing the same after complection of the work, including transportation of the boring equipments, cleaning and levelling the site, excavation of mud pit, channels etc, levelling of site all complete as per direction of Engineer in charge
272	Supplying all labour, T&P and transporting the boring pipes, top casing, grouting pipes, PVC pipes and fittings, PVC well screens, cement, bentinite and gravels etc to the worksite including loading and unloading etc all complete as per direction of the Engineer in charge.
273	Supplying all labours, T&P and drilling pilot bore not less than 102mm dia, without casing pipes in all kind of soils and rocks for the following depths excluding supply of necessary boring pipes including supply of necessary cutting equipments, extra sockets ( whenever required) etc and withdrawing the boring pipes, washing and keeping the bore logging if required all complete as per direction of Engineer in chargeDrilling pilot bore from 0 to 360 metres
274	Supplying all labour, T&P and reaming the pilot bore to the following sizes and depth without casing pipes including withdrawing the boring pipes, washing the bore by means of pipe cylinder etc all complete as per direction off Engineer in charge.Reaming 100mm to 150mm dia from 0-360 mtr
275	Reaming 150mm to 200mm dia from 0-360 mtr
276	Reaming 200mm to 250mm dia from 0-360 mtr
277	Supplyimg all labour, T&P and jointing materials & lowering the 300mm dia top casing pipes into the position and removing the same after all complete as per direction of Engineer in chargeFrom 0-360 mtr
278	Supplying all labour, T&P and jointing materials and lowering the pvc casing pipes, fittings and well screens in position, including fitting and fixing of centraliser, cutter plug and washing the bore all complete as per direction of Engineer in charge150mm dia PVC casing pipe from 0 to 360 metres
279	Cost of 150 mm dia PVC ASTM pipe(sch-80)
280	Cost of 150mm dia Slott Cutting
281	150 mm dia C.I.end/top cutter plug
282	Cost & Conveyance of bentonite powder
283	Supplying all materials, labour, T&P and packing the bore with washed gravel of river shingles of required size and specification around the well screen and pipe etc all complete as per the direction off the Engineer in charge.Labour charges
284	Cost and Conveyance of gravel
285	Supplying all materials, labour, T&P and packing the bore with river sand over the gravel pack all complete as per the direction of the Engineer in charge.Labour charges
286	Cost and Conveyance of sand
287	Supplying all labour, T&P including developing the tube well with compressor ( supplied by contractor ) continuiously worked till clear & adequate discharge is obtained from the tube well including supply and use of necessary equipments and labour as per direction of the Engineer in charge.Labour charges
288	Supplying all materials, labour, T&P and providing, fitting and fixing submersible pump with squirrel cage induction type submerisble electric motor to run on 3 phase/1 phase line voltage ranging from 320 volt to 450 volt conforming to IS: 8034/89 with following specifications with suitable control panel, jointing with GI/PVC/HDPE pipes, electrification, testing, commissioning, trail running, conveyance of all materials to worksite, payment of taxes etc all complete as per specification and direction of the Engineer in charge1.50 three phase 3 stage head range 30 to 54 metres, discharge 155 to 110 L.P.M with outlet dia of 32mm
289	DOL Control panel
290	40mm dia steel short piece
291	50mm size CI bracket
292	2.50 sqmm flat cable
293	Steel rope with cover
294	20mm dia rigid UPVC pipes
295	Labour charges for lowering of submesible pumpset with pipes and cables etc. with testing and commissioning at site.
296	Supplying all materials, labour, T&P and providing & electrification to submerssible pump sets and service connection including fitting fixing of electric board & Switch etc all complete as per direction of the Engineer in charge.
297	Supplying all materials, labour, T & P and constructing Bore well protection chamber of the inside size 650x650x1000 hight with cement concrete (1:3:6) using 40mm size hard granite metal on foundation, 1st class Fly ash brickwork in cement mortar (1:3), with base cement concrete (1:2:4) using 12mm size h.g. chips, 12mm thick cement plaster (1:4) inside and outside, RCC cover slab in (1:1.5:3) using 12 mm size h.g. chips, earthwork in excavation in all kind of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction pof the engineer in charge.
298	Rain Water Harvesting Suplying all materials, labour, T&P and setting up boring equipments including erection of suitable staging for installation of the required size of tube well, dismantling and removing the same after complection of the work, including transportation of the boring equipments, cleaning and levelling the site, excavation of mud pit, channels etc, levelling of site all complete as per direction of Engineer in charge
299	Supplying all labour, T&P and transporting the boring pipes, top casing, grouting pipes, PVC pipes and fittings, PVC well screens, cement, bentinite and gravels etc to the worksite including loading and unloading etc all complete as per direction of the Engineer in charge.
300	Supplying all labours, T&P and drilling pilot bore not less than 102mm dia, without casing pipes in all kind of soils and rocks for the following depths excluding supply of necessary boring pipes including supply of necessary cutting equipments, extra sockets ( whenever required) etc and withdrawing the boring pipes, washing and keeping the bore logging if required all complete as per direction of Engineer in chargeDrilling pilot bore from 0 to 360 metres
301	Supplying all labour, T&P and reaming the pilot bore to the following sizes and depth without casing pipes including withdrawing the boring pipes, washing the bore by means of pipe cylinder etc all complete as per direction off Engineer in charge.Reaming 100mm to 150mm dia from 0-360 mtr
302	Reaming 150mm to 200mm dia from 0-360 mtr
303	Reaming 200mm to 300mm dia from 0-360 mtr
304	Supplyimg all labour, T&P and jointing materials & lowering the 300mm dia top casing pipes into the position and removing the same after all complete as per direction of Engineer in chargeFrom 0-360 mtr
305	Supplying all labour, T&P and jointing materials and lowering the pvc casing pipes, fittings and well screens in position, including fitting and fixing of centraliser, cutter plug and washing the bore all complete as per direction of Engineer in charge150mm dia PVC casing pipe from 0 to 360 metres
306	Cost of 150 mm dia PVC ASTM pipe(sch-80)
307	Cost of 150mm dia Slott Cutting
308	150 mm dia C.I.end/top cutter plug
309	Cost & Conveyance of bentonite powder
310	Supplying all materials, labour, T&P and packing the bore with washed gravel of river shingles of required size and specification around the well screen and pipe etc all complete as per the direction off the Engineer in charge.Labour charges
311	Cost and Conveyance of gravel
312	Supplying all materials, labour, T&P and packing the bore with river sand over the gravel pack all complete as per the direction of the Engineer in charge.Labour charges
313	Cost and Conveyance of sand
314	Supplying all labour, T&P including developing the tube well with compressor ( supplied by contractor ) continuiously worked till clear & adequate discharge is obtained from the tube well including supply and use of necessary equipments and labour as per direction of the Engineer in charge.Labour charges
315	Supplying all materials, labour, T&P and fitting and fixing U-PVC SWR soil waste ventilating pipes and fittings of the following outside diameter conforming to ISI No. 13592/1992 to walls with nails, bobbins and wooden plugs or laying in trenches including jointing with supply of approved rubber lubricant by non-heat application method/as per manufacturer’s specification, testing, earthwork in excavation in all kinds of soil and refilling of trenches as per specification and direction of the Engineer in charge110mm dia U-PVC SWR pipes(Supreme/Ashirvad)
316	110mm U-PVC door Tee
317	110mm U-PVC plain Tee
318	110mm dia U-PVC off set
319	110mm dia U-PVC clamp
320	Supplying all materials, labour, T&P and cutting holes through existing brick or laterite masonry wall for taking HCI/PVC SWR pipes and fittings including making good the damages etc all complete as per PH specification and direction of the Engineer in charge250mm to 375mm thick wall
321	Supplying all materials, labour, T&P and cutting hole in R.C.C roofs,cornice, etc for passing H.C.I Pipes /U.P.V.C pipes and fittings etc and repairing the holes after insertion of pipes etc with cement concrete (1:2:4 ) including finishing complete so as to make it leak proof as per direction of the Engineer in charge.
322	Supplying all materials, labour, T&P and constructing inspection chamber of the following size with cement concrete(1:3:6) using 40mm size hard granite metal on bed, 1st class Fly ash brickwork in cement mortar(1:6), moulding and shaping the channel inside and benching with cement concrete (1:2:4) using 12mm size h.g chips, 12mmthick cement plaster (1:3) with punning to inside, cement flush pointing (1:3) to outside, RCC cover slab in (1:2:4) using 12mm size h.g chips with RCC man hole cover, earthwork in excavation in all kinds of soil and refilling the cavity around the chamber including watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in chargeInside size 760mmx760mmx460mm
323	Supplying all materials, labour, T&P and constructing soakway pit of the following size with precast RCC rings joined loose, gravel backing in the rear of well steining, precast RCC cover slab in cement concrete (1:2:4) using 12mm size hg chips fitted with iron lifting handles including cutting hole in the rings for inlet pipe,earthwork in open well excavation in all kinds of soil and refilling of cavity around the pit & painting the iron works, watering, curing, conveyance of all materials to worksite, payment of royalty, taxes etc all complete as per approved specification and direction of the Engineer in charge 1.22m dia x 2.10m deep soakway pit
324	Supplying all materials, labour, T&P and laying in trenches (to level or slope) unplasticized PVC pipes conforming to IS: 4985/2000 of the following outside dia for class–3(0.60mpa) including jointing with supply of approved solvent cement by non-heat application method/as per manufacturer’s specification, providing and laying in trench cement concrete (1:4:8) with 40mm size hard granite metal in the Type C-1 standard bedding surrounding or encasing including concrete for bedding and curing etc all complete as per PH specification and direction of the Engineer in charge.160mm dia u-pvc pipe alround concrete Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents
5	Click here to download tender document	Tender Documents

Also Visit

Tenders

Odisha Tenders

Construction Tenders

Turnkey Projects Tenders

Infrastructure Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Refurbishment Such As Repair/ Renovation To Physical Health Infrastructure At Chc Mandasahi In The District Of Jagatsinghpur For The Year 2025-26 For Implementation Of Ama Hospital(2Nd Phase), Jagatsinghpur-Odisha

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Refurbishment Such As Repair/ Renovation To Physical Health Infrastructure At Chc Mandasahi In The District Of Jagatsinghpur For The Year 2025-26 For Implementation Of Ama Hospital(2Nd Phase), Jagatsinghpur-Odisha

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us