|
| 1 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided. |
| 2 | Material and labour for water proofing treatment to RCC sunken slab and adjoining vertical slab as described following method complete as per direction of GE :- (A). Supplying and applying two component elastomeric acrylic polymer modified cementitious water proofing coating , Smart Care Damp proof 2K, having 100% elongation as per ASTM D412, resisting 5 bars hydrostatic pressure as per DIN 1048 reduction to rapid chloride shall be 70 as per DIN 1048 crack bridging upto 1.2mm as per ASTM 4548.5 Clean all working surface and made free from dirt , grease laitance etc . After inspection for all working area rough surface , craks and construction joints are treated by polymer modified mortar of 1:1:4 (1 cement : 1 Polymer : 4 sand) making Gola of size 75mm x 75mm at junction of vertical & horizontal with the polymer modified mortar of ( 1 cement : 1 polymer : 4 sand) The mixing ratio of the coating shall be 21.5 kg/sqm per coats etc complete as per manufacturer specifications.(B). Bore packing : All the bore hole gaps between concrete surface and pvc pipe of various dia upto the neck level shall be filled with non shrink free flow grout -Smart Care GP grout having dual shrinkage compensation properly. Before the bore packing , surface of the pvc pipe and concrete surface will be made rough and sand will be sprinkled with polymer bonding agent.(C). Apply 12-15mm plaster on slab and vertical surface admixed with Smart Care Vitalia Neo @200ml/ per bag of cement before cement .(D). 40mm dia HDPE pipe to be provided as spout pipe in sunken portion |
| 3 | M&L for Aerated Autoclaved Concrete (AAC) blocks work according to Indian Standard Specification IS :2185 (Part-3) 1984 and latest revision built in cement and sand mortar 1:6 with Aerated Autoclaved Concrete (AAC) blocks straight or curved on plan exceeding 6 Mtr mean radius as in sunken floor complete all as specified and as directed bt Engineer-in-charge. |
| 4 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), terrazo dado/wall tiling and skirting. etc on brick or stone walls etc including racking out joints hacking for key and scrubbing removing serviceable tiles to store and rubbish off the premises etc complete all as specified. |
| 5 | M&L anti slip coloured ceramic tiles 7 to 8mm thick (square/rectangular) of Size 400mmx400mm in floors and Skirting etc. including 10mm thick bedding layer using type-I adhesive (thick bed fixing) confirming to IS-15477:2004 and pointed in white or coloured epoxy grout to match the shade of tile including necessary cutting as per site requirement complete all as specified and as directed. |
| 6 | M&L anti slip coloured ceramic tiles 7 to 8mm thick (square/rectangular) of Size 300mmx300mm in floors and Skirting etc. including 10mm thick bedding layer using type-I adhesive (thick bed fixing) confirming to IS-15477:2004 and pointed in white or coloured epoxy grout to match the shade of tile including necessary cutting as per site requirement complete all as specified and as directed. |
| 7 | M&L glazed ceramic coloured tiles of approved quality in vertical surfaces 450mm x 300mm x 7mm / 600mm x 300mm x 7mm thick including 10mm thick backing coat using type -I adhesive confirming to IS15477:2004 and pointed in white or coloured cement to match the shade of tiles including necessary cutting as per site requirement complete all as specified. |
| 8 | Material and labour 18-20mm thick machine cut, granite duly factory grinding and polished (table rubbed and polished) of approved colour for counter sunk wash basin, plateform /cooking plateform , steps, jambs,pillars, window cills, , shelves, urinal partition and like , including screed bed 15mm thick in cement mortar (1:4) (grey cement slurry) including pointing in white cement (1:2) using marble dust with admiture of pigment to match with shade of granite stone slab including cutting, cleaning and extra polishing if required and Rounding of / moulding to edges (half round) of stone of any description including rubbing and polishing (Granite finish) complete all as specified. |
| 9 | M&L 16-18mm thick approved shade green marble machine cut duly factory grinding and polishing (table rubbed and polished) as in steps, skirting / dado, riser, jambs, pillars , window cills, for counter sunk wash basin and like where directed laid over and including 15mm thick cement mortar (1:4) screed bed including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of marble including cutting as required including cleaning and extra polishing if required complete all as specified. |
| 10 | Supply and Fixing 16 mm CPVC pipe SDR 11and plain CPVC SDR 11 fitting with all fitting and fixed to walls & ceilings or laid in floors including Taking up or down galvanised steel water tubing (GI pipe) 15mm bore including fitting/connection from wall/ceiling/floor/concealed etc, complete all as specified. |
| 11 | Supply and Fixing 20 mm CPVC pipe SDR 11and plain CPVC SDR 11 fitting with all fitting and fixed to walls & ceilings or laid in floors including Taking up or down galvanised steel water tubing (GI pipe) 20mm bore including fitting/connection from wall/ceiling/floor/concealed etc, complete all as specified. |
| 12 | S&F in repair 15 mm dia ISI Mark bore chromium plated long body with wall flanges bib taps cast copper alloy, screwed for iron pipe, or for brass ferrule complete all as specified and as directed. |
| 13 | S&F in repair, 15mm bore ISI chromium plated quarter turn Pillar cock screwed down high pressure, with or without lettered Hot ot Cold with long screwed shanks and flynuts screwed for iron pipe complete all as specified. |
| 14 | S&F in repair, 15 mm bore chromium plated fancy type stop valve of cast copper alloy screwed down high pressure with crutch butter fly handle screwed both ends for iron pipe or for unions and fixed all as specified |
| 15 | S&F in repairs 15 mm dia bore chromium plated quarter turn concealed stop valves of cast copper alloy fancy type with long shank & cup etc. complete all as specified and as directed. |
| 16 | S&F in repair Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25mtr long flexible tube in chrome finish and wall hook including making connection and fixed in position complete in all respect all as specified. |
| 17 | S&F in repair, water jet for EWC chromium plated with PVC connection complete all as specified and directed. |
| 18 | S&F in repair, Brass chromium plated bottle traps for wash basins with inlet and outlet screwed for pipe or connections including necessary packing, union and cap and fixed in 32mm bore of trap complete all as specified and as directed. |
| 19 | S&F in repair brass chromium plated shower rose 70 mm of size with arme and with or without swivel joints to steel pipe or union complete all as specified and as directed. |
| 20 | S&F in repair PVC connection 15 mm size with PTMT nuts of length 600 mm of approved quality |
| 21 | S&F chromium plated soap tray any type and fixed to plugs on wall with chromium plated brass screws complete all as specified and directed. |
| 22 | S&F in repair brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges. |
| 23 | S&F in repairs corner glass shelf (25cm/30cm) chromium plated brass bracket & railing etc complete all as specified and directed. |
| 24 | S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass self 12cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed. |
| 25 | S&F in repairs Vitreous china premium / Ist quality wash down water closed pan (padestal pattern, EWC) P'Trap white colour (excluding flushing cistern and flushing pipe) including connection to drain etc, including plastic water closet seat with cover (white colour) closed pattern with flat bottom and mild steel chromium plated or aluminised hinging device including stainless steel chromium plated jet spray with 1.0 mtr long pvc pipe with cp connector and necessory nut bolt and with CP screws and plug for fixing WC all as specified. |
| 26 | S&F in repairs plastic water closet seat, black, white or off white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device suitable for EWC complete in all respect all as specified. |
| 27 | S&F in repair PVC low level cistern of 10 ltr capacity with top bush button inclusive of brackets and PVC bend long type and connection to flush pipe of any size and pattern with inlet, ball valve, float and handle complete in all respect all as specified. |
| 28 | S&F in repairs Vitreous china Rimless Bowl with cistern for coupled WC with UF soft close , slim seat cover , hinges, conversion bend, Dual flush cistern fittings, fixing accessories and accessories set, size 390x645x845mm , S'Trap-250mm (with conversion bend) including stainless steel chromium plated jet spray with 1.0 mtr long pvc pipe with cp connector and necessory nut bolt and with CP screws and plug for fixing EWC all as specified. |
| 29 | S&F in repair vitrous China wash hand basin counter top of size 565x425x140 mm white complete all as specified and directed. |
| 30 | S&F in repair Wash hand basin of size 550 x 400 mm vitrous China white flat back including brackets, waste coupling & including PVC 'P Trap complete all as specified and directed. |
| 31 | S&F in repairs toilet paper holder of brass, chromium plated fixed to walls with chromium plated (CP) brass screws complete in all respect all as specified. |
| 32 | S&F for overhead shower rose 240mm x 240mm with shower arm of 450mm long 20mm dia round shape with 90 degree bend for wall mounted shower with flange of same make and including all necessary accessories as recommended by manufacturer for fixing and taking down existing of any description /size complete all as specified and as directed. |
| 33 | S&F looking mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood and moulding /wooden fillets (cross sectional area exc 6 sqcm & n.exc 13 Sqcm )on top side around edges including necessary screws and cup washers and fixing to wall with suitable hanging /fixing arrangement of any size each exceeding 0.50 sqm complete all as specified. |
| 34 | S&F in repairs single liver basin mixer with popup waste system & 450mm long braided hoses, fancy type, cast copper alloy with capstan heads, chromium plated screw down high pressure with long screw shank and fly nuts screwed for 15mm bore of iron pipe complete all as specified and directed. |
| 35 | S&F in repairs single liver sink mixer with swinging spout with connecting legs & wall flanges, wall mounted fancy type, chromium plated cast copper alloy screw down high pressure screwed ends for 15mm bore of iron pipe or for union and fixed in position complete all as specified and directed. |
| 36 | S&F in repairs wall mixer 3-in-1 system with provision for both hand shower and overhead shower complete with 115mm long bend pipe , connecting legs, wall flange ( without hand and overhead shower)and fixed in position complete all as specified and directed. |
| 37 | S&F in repair, stainless steel plate racks of size 900mm x 600mm x 250mm and thickness of SS sheet of 1mm fixed on wall etc complete all as specified and directed. |
| 38 | S&F in repair sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm including 40mm dia waste fittings all as specified and as directed. |
| 39 | S&F in repairs Vitreous China Urinals, half stall type white including 40mm waste coupling including making connection and fixed in position complete in all respect all as specified. |
| 40 | S&F Urinal spreader of PTMT any colour for fixing with 15mm dia pipe (minimum weight 60 gms). all as specified and as directed. |
| 41 | S & F in repairs vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm X 440 X 260 mm white with integral foot rests (excluding supply of flushing cistern and flush pipe) including connection to trap and to flushing pipe incl lime concrete bedding and connection to antisyphonage pipe etc including making good to floor.(Supply only items are measured separately). |
| 42 | S&F 110 mm bore of pipe PVC (SWR) type B pipes single socket in any length with rubber ring joint fixed to walls with with projected galvanised MS clamps as specified, and also repair to blow holes/spouts and mouth of pipe for leak proof purposeincluding taking down old AC eaves gutter and rain water pipes (any size and pattern) including all fittings complete all as directed. |
| 43 | S&F 110 mm bore of pipe PVC (SWR) type B bends of any radius / shoe fixed to PVC pipes as directed. |
| 44 | S&F 110 mm dia of long neck PVC (SWR) P'Trap with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B1 in repair all as directed. |
| 45 | S&F 110 mm dia of long neck PVC (SWR) floor trap with grating including jointing to waste pipe fixed in cement concrete 1:2:4 type B1 in repair all as directed. |
| 46 | S&F branch pieces, PVC (SWR) single 110 mm bore equal or unequal (Y, T etc ) as in repairs all as directed. |
| 47 | S&F 18mm thick high density highmoisture resistant (HDHMR) exterior grade board with both side white balancing (BSB) with density of 850 kg/cum for frame and shutters for kitchen cabinet / cupboards etc including dismantling old boards complete all as specified. (Note : Board on back side wall will be fixed with minimum 5mm PVC spacers. The payment for the same deemed to be included in the quoted unit rates). |
| 48 | S&F 18mm thick high density highmoisture resistant (HDHMR) exterior grade board with one side designer laminate (OSL) of approved colour and finishing and other side white balancing (BSB) with density of 850 kg/cum for frame and shutters for kitchen cabinet / cupboards etc including dismantling old boards complete all as specified. (Note : Board on back side wall will be fixed with minimum 5mm PVC spacers. The payment for the same deemed to be included in the quoted unit rates). |
| 49 | S&F auto closing hinges 35mm of 0 crank (KH-001) or 8 crank (KH-002) openable at 110 degree for kitchen cabinet shutters complete in all respect and fixed in position. |
| 50 | S&F ball bearing runners 45mm telescopic (KTS-20) full extension load capacity 50 kgs complete all as specified. |
| 51 | S&F Piano /continuous hinge of size 19mm stainless steel complete all as specified. |
| 52 | S&F ball catchers 304 grade stainless steel finished suitable for cabinets premium quality complete fixed in position as per manufacturers instructions complete all as specified. |
| 53 | S&F D type cabinet handles premium quality stainless steel 304/gloss chrome/SN finished 150mm long matt finished complete fixed in position all as specified. |
| 54 | S&F stainless steel finished locks (double action) with 02 Nos key min outer body size 75mm suitable for wardrobes / CB etc. complete fixed in position all as specified. . |
| 55 | Taking down chowkhats or frames with shutters of PVC door , wooden door shutter, wooden window shutter , Mild steel window and Mild steel ventilators (without taking off shutters from the frames) area not exceeding 1.50 sqm each complete all as specified. |
| 56 | Taking down chowkhats or frames with shutters of PVC door ,wooden door shutter, wooden window shutter , Mild steel window and Mild steel ventilators (without taking off shutters from the frames) area exceeding 1.50 sqm but not exceeding 4.00 Sqm each complete all as specified. |
| 57 | Supply and Fixing Factory made single extruded WPC ( Wood Polymer Composite ) Solid Door Frame /Chowkhat of Size 45mmx70 mm comprising of virgin polymer of K value 58-60 (susension grade ), Calcium Carbonate and nautral fibers ( Wood Powder /rice husk/wheat husk ) and non toxic additives (max toxcity index of 12 for 100 gms ) fabricated with miter joints after applying PVC Solvant cement and screwed with full body threaded star headed SS screws having minimum density of 750 kg /cum and screw withdrawl strength of 2200 N (face ) & 1100 N (Edge) minimum Compressive strength of 508 N /sqmm modulus of elasticity 900 N/Sqmm and resisitence to spread of flame of class A cat with property of being termite / borer proof , water moistur proof and fire retaident and fixed in position With MS hold Fast /SS Dash Fastner incl Supply and Fixing (03 Nos Per Frame ) 100 mm long SS Butt Hinges with and making good with plastering/rendering etc. around the finished opening of the distrubed surface with CM 1:4 complete all as specified. |
| 58 | Supply & Fixing Factory made single extruded WPC ( Wood Polymer Composite ) Solid Door Frame / Chowkhat with single rebate of Size 65mm x 100 mm comprising of virgin polymer of K value 58-60 (suspension grade ), Calcium Carbonate and nautral fibers ( Wood Powder / Rice husk / Wheat husk ) and non toxic additives (maximum toxcity index of 12 for 100 gms ) fabricated with miter joints after applying PVC Solvant cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg /cum and screw withdrawl strength of 2200 N (face ) & 1100 N (Edge) minimum Compressive strength of 58 N /sqmm modulus of elasticity 900 N/Sqmm and resisitence to spread of flame of class A category with property of being termite / borer proof , water moisture proof and fire retaident and fixed in position with and including MS hold Fast lugs / SS Dash Fastner of required dia and length with and including Supply and Fixing (03 Nos Per Frame ) 100 mm long SS Butt Hinges with and making good with plastering/rendering etc. around the finished opening of the distrubed surface with CM 1:4 complete all as specified. |
| 59 | S&F Factory made single extruded WPC ( Wood Polymer Composite ) Solid Plain flush door shutter of 30 mm size comprising of virgin polymer of K value 58-60 (susension grade ), Calcium Carbonate and nautral fibers ( Wood Powder /rice husk/wheat husk ) and non toxic additives (max toxcity index of 12 for 100 gms ) having minimum density of 650 kg /cum and screw withdrawl strength of 1800 N (face ) & 900 N (Edge) minimum Compressive strength of 50 N /sqmm and resisitence to spread of flame of class A cat with property of being termite / borer proof , water moistur proof and fire retaident and fixing and incl 02 Nos (per Leaf) SS 150mm long Tower Bolt, 02 Nos (per Leaf) SS 150mm long handle and 01 No (per Leaf) SS 300mm long sliding door bolt as specified. |
| 60 | S&F Factory made single extruded WPC ( Wood Polymer Composite ) Solid Plain flush door shutter of 35 mm size comprising of virgin polymer of K value 58-60 (susension grade ), Calcium Carbonate and nautral fibers ( Wood Powder /rice husk/wheat husk ) and non toxic additives (max toxcity index of 12 for 100 gms ) having minimum density of 650 kg /cum and screw withdrawl strength of 1800 N (face ) & 900 N (Edge) minimum Compressive strength of 50 N /sqmm and resisitence to spread of flame of class A cat with property of being termite / borer proof , water moistur proof and fire retaident and fixing and incl 02 Nos (per Leaf) SS 150mm long Tower Bolt, 02 Nos (per Leaf) SS 150mm long handle and 01 No (per Leaf) SS 300mm long sliding door bolt as specified. |
| 61 | S&F Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (fixed portion) with extruded built up standard tubular sections/appropriate Z sections and other sections of approved make conforming to IS : 733 and IS : 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gap at junctions, ie at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, aluminium snap beading for glazing/paneling, CP brass/stainless steel screws, all complete as per architechural drawings and directions of Engineer-in-charge. |
| 62 | M&L Providing and fixing factory made uPVC white colour casement (Openable) window /ventilator made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm).Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile,frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), Butt Hinges of 'zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass. (Note: The unit rate quoted by contractor excludes cost of glass and Wire mesh and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 63 | M & L sheet glass ordinary quality 4 mm thick and glazing with oil putty in square n exc 0.50 sqm in each panes fixed to steel or wooden window frames |
| 64 | All as per item No. 63 above but 4 mm thick pin head type, figured glass |
| 65 | S&F for tinted glass of selected quality, 5 mm thick and glazing with aluminium beading in aluminium door, partition and window shutter all as specified and directed. |
| 66 | S&F stainless steel wire cloth 0.56 mm nominal dia of wire and avarage width of aparture 1.18 mm and fixed with tinned tacks ro galvanised wire stapple. |
| 67 | M&L Brick work with sub class 'B' bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 and including demolition of brick work or stone masonry built in cement mortar complete all as specified and directed. |
| 68 | M&L for brickwork with sub class B bricks straight or curved on plan exc 6mtr mean radius in half brick thick wall built in CM (1:4) and including demolition of brick work or stone masonry built in cement mortar complete all as specified and directed. |
| 69 | Supply & fixing in repairs rotational moulded polyethylene water storage tank white colour of capacity 1000 litres (cylindrical vertical, triple layered with closed top), hoisted and fixed in position including making inlet and out let connection complete all as specified. |
| 70 | Supply & fixing in repairs rotational moulded polyethylene water storage tank white colour of capacity 500 litres (cylindrical vertical, triple layered with closed top), hoisted and fixed in position including making inlet and out let connection complete all as specified. |
| 71 | Supply & fixing in replacement Gun metal, globe or gate valve (ISI marked), brass cast copper alloy, with iron wheel head, screwed both ends suitable for 15mm bore iron pipes complete all as specified. |
| 72 | Supply & fixing in replacement Gun metal, globe or gate valve (ISI marked), brass cast copper alloy, with iron wheel head, screwed both ends suitable for 20mm bore iron pipes complete all as specified. |
| 73 | S&F in repairs 20 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & hihdesity plastec ball screwed for iron pipe and fixed. (Minimum weight 20mm - 210 gms) etc complete. |
| 74 | Supply and Fixing in repair Chromium Plated grating (with or without waste hole), 125mm size, fixed on floor/nahani traps etc complete all as specified. |
| 75 | S&F in repair PVC waste pipe of size 25/32/40mm for wash hand basin , sink and urinal wastage water all as directed. |
| 76 | Demolition of cement concrete reinforced of any discription and in any position, including reinforcement cut as required to facilitate and including removing rubbish material from building and thrown in low lying empty area (as per direcction of AGE/JE) at any distance upto 500 metres from the site complete all as specified. |
| 77 | Material and labour for RCC Nominal Mix (1:2:4) type B-1 (using 20 mm graded stone aggregate) for slabs supported on walls, shelves, beams and columns, lintels, fins, facia and spiral staircase etc and the like including form work complete all as specified. |
| 78 | Material and labour for Mild steel TMT bars 6 to 8mm dia , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips as directed. |
| 79 | Supply & fixing for Mild steel Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified. |
| 80 | Taking down cement or cement lime plaster from brick wall etc including racking out joints, hacking for key & scrubbing down with water etc complete all as specified. |
| 81 | M&L for rendering 15mm thick in cement mortar 1:6 on internal wall surfaces of brick work or concrete surfaces and finishing the surface even & smooth without using extra cement complete all as specified. |
| 82 | M&L for rendering 15mm thick in cement mortar in 1:4 on external wall surfaces of brick work or concrete surfaces even and fair without using extra cement complete all as specified. |
| 83 | M&L for rendering/plastering 10mm thick (matching with existing plaster thickness) in CM (1:3) on ceiling in patches matching with existing , finished fair and even and smooth without using extra cement complete all as specified. |
| 84 | M&L for preparing newly plastered or concrete surface of ceiling by sand papering or by the other mean and after preparing the surfaces and applying two coats of white wash with (paint brush/with roller) complete all as specified. |
| 85 | M&L for preparation of new plastered Internal wall surface and applying putty 1mm thickness over plastered surface to prepare the surface even and smooth including two coats of distempering with ist quality acrylic distemper (ready mixed) having VOC content less than 50 gms/ltr, of approved manufacturer of required shade and colour complete as per manufacturer specification. |
| 86 | M&L for complete removal of existing treatment on old plastered wall surface and applying putty 1mm thickness over plastered surface to prepare the surface even and smooth including two coats of distempering with ist quality acrylic distemper (ready mixed) having VOC content less than 50 gms/ltr, of approved manufacturer of required shade and colour complete as per manufacturer specification. |
| 87 | M&L for preparation of new plastered wall surface and finishing wall with two coats of Acrylic smooth exterior paint of required shade : (applied @ 1.67 ltr / sqm over and including priming coat of exterior primer applied @ 2.20 kg / 10 sqm complete all as specified and as directed. |
| 88 | M&L for complete removal of existing treatment on old plastered wall surface and finishing wall with two coats of Acrylic smooth exterior paint of required shade : (applied @ 1.67 ltr / sqm over and including priming coat of exterior primer applied @ 2.20 kg / 10 sqm complete all as specified and as directed. |
| 89 | M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coasts of synthetic enamel paint (for steel surfaces) complete all as specified. |
| 90 | M&L for preparation old painted steel and iron surfaces any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 91 | M&L for preparation of old painted wood and wood based surfaces of any description not otherwise described over 10 cm in width or girth by cleaning the dust and removing all loose particles with using clean clothes and dry paint brush and applying one coat of synthetic enamel paint (1st quality of approved tint/colour to achieve glossing finish with using paint brush complete all as specified and directed. Please Enable Macros to View BoQ information |
