|
| 1 | (A) Removal of following unserviceable parts of existing furniture items of various MES F/DB/FD/MAP drgs carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, screwing, weldging, glueint, providing hinges, denting applying putty for levelled surface, placing every part in-tact and painting/polishing the disturbed portion, as applicable as per drgs, complete all as specified and directed.(B) Work will be executed where the furniture exist in JCOs/ ORs Married n of GE (W) Colaba including BSO's Furniture Yard all as specified and directed. |
| 2 | Chair Dining FD-279 |
| 3 | Removing the unserviceable front leg and S&F the new front leg in the furniture (chair dining) as per drawing No FD-279, complete all as specified and as directed. |
| 4 | Removing the unserviceable rear leg and S&F the new rear leg in the furniture (chair dining) as per drawing No FD-279, complete all as specified and as directed. |
| 5 | Removing the unserviceable upper/lower stiffener of back support and S&F the new upper/lower stiffener of back support in the furniture (chair dining) as per drawing No FD-279, complete all as specified and as directed. |
| 6 | Removing the unserviceable stiffener of leg bottom and S&F the new stiffener of leg bottom in the furniture (chair dining) as per drawing No FD-279, complete all as specified and as directed. |
| 7 | Removing the unserviceable front/rear/left/right rail of seat and S&F the new front/rear/left/right rail of seat in the furniture (chair dining) as per drawing No FD-279, complete all as specified and as directed. |
| 8 | Removing the unserviceable canning of seat and S&F the new canning of seat in the furniture (chair dining) as per drawing No FD-279, complete all as specified and as directed. |
| 9 | Removing the unserviceable PVC ring and S&F the new PVC ring in the furniture (chair dining) as per drawing No FD-279, complete all as specified and as directed. |
| 10 | Removing the unserviceable bracket of teak wood and S&F the new bracket of teak wood in the furniture (chair dining) as per drawing No FD-279, complete all as specified and as directed. |
| 11 | Scraping and removing of all dusts including sand papering & preparing of surface and filled with wax / wooden putty and finishing with two coats of French polish to match with the colour with high class glossy finish in the furniture (chair dining) as per drawing No FD-279, complete all as specified and as directed. |
| 12 | Chair Dining PVC Bottom FD/MAP-II/05: Removing the existing unserviceable part and S&F following similar new part as per Drg as directed. |
| 13 | Front Leg |
| 14 | Rear leg |
| 15 | Upper/lower stiffener of back support |
| 16 | Stiffner of leg bottom |
| 17 | Front/rear/left/right rail of seat |
| 18 | PVC Bottom seat |
| 19 | PVC ring |
| 20 | Bracket of teak wood |
| 21 | Scraping and removing of all dusts including sand papering & preparing of surface and filled with wax / wooden putty and finishing with two coat of french polish to match with the colour with high class glossy finish in the furniture (chair dining PVC bottom) as per drawing No FD/MAP-II/05, complete all as specified and as directed. |
| 22 | Chair Easy FD-358 With cushion/Similar pattern:Removing old existing unserviceable cushion foam with tapestry cloth of seat and back of chair easy FD-358 and Supply & fix new cushion foam of 20 density and 50 mm thick with high quality tapestry cloth with white inner lining cloth after repair / tightening of loose parts of wooden. The rates of tapestry cloth should not less than Rs. 650/- per metre duly stitched all as shown on drg all as specified and directed. Removing the existing unserviceable part and S&F following similar new part as per Drg and as directed by Engr-in-Charge. |
| 23 | All as per item No. 4 above but Stiffner of Leg bottom |
| 24 | All as per item No. 4 above but Front left/right Leg |
| 25 | All as per item No. 4 above but Rear left/right Leg |
| 26 | All as per item No. 4 above but Upper/lower stiffner of Back support |
| 27 | All as per item No. 4 above but Bracket of teak wood. |
| 28 | All as per item No. 4 above but Front/rear//left/right rail of seat. |
| 29 | All as per item No. 4 above but PVC Ring. |
| 30 | Scraping and removing of all dusts including sand papering & preparing of surface of chair easy and filled with wax / wooden putty and finishing with two coats of French polish to match with the colour with high class glossy finish in the furniture as per drawing, complete all as specified and as directed. |
| 31 | Chair Easy FD-229: |
| 32 | Removing the unserviceable front left/right leg and S&F new front left/right leg in the furniture (chair easy) as per drawing No FD-229 all as specified and as directed. |
| 33 | Removing the unserviceable rear left/right leg and S&F new rear left/right leg in the furniture (chair easy) as per drawing No FD-229 all as specified and as directed. |
| 34 | Removing the unserviceable left/right arm rest and S&F new left/right arm in the furniture (chair easy) as per drawing No FD-229 all as specified and as directed. |
| 35 | Removing the unserviceable front / rear/ left/ right rail of seat and S&F new front / rear/ left/ right rail of seat in the furniture (chair easy) as per drawing No FD-229 all as specified and as directed. |
| 36 | Removing the unserviceable top/bottom/left/right rail of back frame and S&F the new top/bottom/left/right rail of back frame in the furniture (chair easy) as per drawing No FD-229 all as specified and as directed. |
| 37 | Removing the unserviceable canning of seat and S&F new canning of seat in the furniture (chair easy) as per drawing No FD-229 all as specified and as directed. |
| 38 | Removing the unserviceable canning of back and S&F new canning of back in the furniture (chair easy) as per drawing No FD-229 all as specified and as directed. |
| 39 | Removing the unserviceable PVC ring and S&F new PVC ring in the furniture (chair easy) as per drawing No FD-229 all as specified and as directed. |
| 40 | Removing the unserviceable bracket of teak wood and S&F the new top bracket of teak wood in the furniture (chair easy) as per drawing No FD-229 all as specified and as directed. |
| 41 | Scraping and removing of all dusts including sand papering & preparing of surface and filled with wax / wooden putty and finishing with two coats of French polish and match with the colour with high class glossy finish in the furniture (chair dining) as per drawing No FD-229 all as specified and as directed. |
| 42 | Table 3'x2' with drawer FD-283 & Table 3'x2 without drawer FD-284 without drawer/Table one piece all purpose similar pattern: Removing the existing unserviceable part and S&F following similar new part as per Drg and as directed by Engr-in-Charge. |
| 43 | Table top |
| 44 | Stiffner of Leg |
| 45 | Long rail |
| 46 | Short rail |
| 47 | Drawer complete of Teak wood 6/12/18 mm |
| 48 | PVC Ring |
| 49 | Bracket of teak wood |
| 50 | Scraping and removing of all dusts including sand papering & preparing of surface and filled with wax / wooden putty and finishing with two coated of French polich and match with the colour with high class glossy finish in the furniture as per drawing No FD-283 & 284, complete all as specified and as directed. |
| 51 | Table Bed Side Fd-276, 248 |
| 52 | Removing old u/s plywood back of the table bed side & S&F new back of size 510mmx450mm of 6mm thick plywood BWR Gde ISI Marked of of existing shape,size all as specified & shown on drg/ directed by Engg-in Charge. Ref Drg No FD-276, FD-248. |
| 53 | Removing old u/s top of the table bed side & S&F new top of size 450mm x230mm made out of Pre-laminated 18mm thick MDF Board of Exterior Gde both side walnut face of including fixing of flat teakwood beading all around the shutter complete all as specified and drg/ directed by Engg-in Charge.Ref Drg No FD-276 and 248. |
| 54 | Removing old u/s sides of the table bed side S&F new sides of size 510mmx 230mm made out of Pre-laminated 18mm thick MDF Board of Exterior Gde both side walnut face of including fixing of flat teakwood beading all around the shutter complete all as specified and drg/ directed by Engg-in Charge.Ref Drg No FD-276 and 248. |
| 55 | Removing old u/s shelf of the table bed side & S&F new shelf of size 450mm x230mm made out of Pre-laminated 18mm thick MDF Board of Exterior Gde both side walnut face of including fixing of flat teakwood beading all around the shutter complete all as specified and drg/ directed by Engg-in Charge.Ref Drg No FD-276 and 248. |
| 56 | Removing old u/s beading of the table bed side and S&F new teak wood beading 4mm thick 18mm wide alround the front egdes of table bed side complete all as specified & shown on drg and directed by Engg-in Charge.. Ref Drg No FD-276, FD-248. |
| 57 | M& L all applicable portion of Table bed Side shall be 02 coats of French polish of approved shade as directed by Engg-in-Charge.Ref Drg FD-276, FD-248. |
| 58 | Table dressing Gents Fd/E6/MAP/16 |
| 59 | Removing old unserviceable Looking mirror of Table Dressing Gents and S&F new 5/5.5mm thick Looking mirror of size 1200mmx600mm. All as specified and shown in drg/ directed by Engineer-in-Charge. Ref Fd/E6/MAP/16. |
| 60 | Removing old unserviceable wood frame covered to mirror of Table Dressing Gents and S&F new teak wood frame of size 50mmx28mm alround the mirror. All as specified in drg/directed by Engineer-in-Charge. Ref Fd/E6/MAP/16. |
| 61 | Removing old unserviceable glass shelf of Table Dressing Gents and S&F new 5.5mm thick glass shelf of size 600mmx100mm. All as specified in drg and directed by Engineer-in-Charge. Ref Fd/E6/MAP/16. |
| 62 | Removing old unserviceable ply back of Table Dressing Gents and S&F new ply back of size 1200mmx600mm of 12mm thick plywood. All as specified in drg/ directed by Engineer-in-Charge. Ref Fd/E6/MAP/16. |
| 63 | Removing old unserviceable sides of Table Dressing Gents and S&F new sides of size 1200mmx100mm made out of prelaminated 18mm thick MDF board Exterior Gde of approved shade complete all as specified and shown on drg and directed by Engineer-in-Charge. Ref Fd/E6/MAP/16. |
| 64 | Removing old unserviceable wooden brackets of Table Dressing Gents and S&F new teak wood brackets of size 38mmx112mmx112mm complete all as specified and shown on drg/ directed by Engineer-in-Charge. Ref Fd/E6/MAP/16. |
| 65 | Removing old unserviceable legs of Table Dressing Gents and S&F new teak wood legs of size 450mmx38mmx38mm complete all as specified and shown on drg/ directed by Engineer-in-Charge. Ref Fd/E6/MAP/16. |
| 66 | Removing old unserviceable hinges of Table Dressing Gents and S&F new piano type continuous hinges of size 25mm wide complete all as specified and shown on drg/ directed by Engineer-in-Charge. Ref Fd/E6/MAP/16. |
| 67 | Table dressing Gents Fd-230 |
| 68 | Removing old unserviceable Drawer of Table Dressing gents and S&F new Drawer complete as per drg of size 322.5mmx300mmx150mm made up of 12mm thick pre-laminated MDF Board Exterior Gde both side walnut face of complete all as specified and shown on drg/ directed by Engineer-in-Charge. Ref FD-230. |
| 69 | Removing old unserviceable Looking mirror of Table Dressing Gents and S&F new Looking mirror 5/5.5mm of size 380mmx760mm complete with teak wood front frame and batton both of size 35mmx25mm fixed alround duly fixed with clamp for hanging of table dressing gents complete all as specified and shown on drg/ directed by Engineer-in-Charge. Ref FD-230. |
| 70 | Removing old unserviceable knobs of drawers of Table Dressing gents and S&F new knobs as per sample approved by Engg-in-Charge/ GE. All as specified and shown on drg/ directed by Engineer-in-Charge. Ref FD-230. |
| 71 | Removing old unserviceable ply back of Table Dressing Gents and S&F new ply back of size 760mmx380mm of 6mm thick plywood. All as specified in drg/ directed by Engineer-in-Charge. Ref FD-230. |
| 72 | Removing old unserviceable teak wood frame of Table Dressing Gents and S&F new teak wood frame of existing size. All as specified in drg/ directed by Engineer-in-Charge. Ref Fd-230. |
| 73 | M&L for two coats of french polish to new part and one coat to entire surface table dresing gents complete all as specified and directed by Enginer-in-Charge.Ref FD-230. |
| 74 | Peg Table FD 277/384/248 |
| 75 | Removing old unserviceable Top of Peg Table and S&F new top complete of size 300mmx450mm made of pre-laminated 18mm thick wiith 4mm thick teakwood bidding of semi round shape all round the top of table complete all as specified and shown on drg/ directed by Engineer-in-Charge. Ref Drg No FD 277/384/248. |
| 76 | Removing old unserviceable top long rail of Peg Table and S&F new top long rail made out of well seasoned teak wood of size 20mmx40mmx450mm complete all as specified and shown on drg/ directed by Engineer-in-Charge. FD 277/384/248. |
| 77 | Removing old unserviceable top short rail of Peg Table and S&F new top short rail made out of well seasoned teak wood of size 20mmx40mmx300mm complete all as specified and shown on drg/ directed by Engineer-in-Charge. Ref Drg No FD 277/384/248. |
| 78 | Removing old unserviceable leg of Peg Table and S&F new legs made out of well seasoned teak wood of size 30mmx50mmx380mm complete all as specified and shown on drg/ directed by Engineer-in-Charge. Ref Drg No FD 277/384/248. |
| 79 | Removing old unserviceable bottom rail of Peg Table and S&F new bottom rail made out of well seasoned teak wood of size 20mmx40mmx300mm complete all as specified and shown on drg/ directed by Engineer-in-Charge. Ref Drg No FD 277/384/248. |
| 80 | S & F new teak wood Bracket of size 75mm x 75mm x 25mm for Peg Table complete all as show on drg and as directed by Engr-in- charge. Ref Drg No FD 277/384/248. |
| 81 | Removing old unserviceable PVC Hard Rubber rings of Peg Table and S&F new PVC Hard Rubber Rings of 20mm dia of best quality fixed with screw complete all as specified and shown on drg/ directed by Engineer-in-Charge. Ref Drg No FD 277/384/248. |
| 82 | M& L all applicable portion of Peg Table shall be 02 coats of French polish of approved shade as directed by Engg-in-Charge.Ref Drg384/248. All as specified and directed by Engineer-in-Charge. |
| 83 | Table Dining 120x90cm DRG NO FD-289/139/273/230: Removing the existing unserviceable part and S&F following similar new part as per Drg and as directed by Engr-in-Charge. |
| 84 | Table Top |
| 85 | Top long rail |
| 86 | Top short rail |
| 87 | Wooden stiffner |
| 88 | Wooden brackets |
| 89 | PVC Hard Rubber Rings |
| 90 | M&L all applicable portion of Table Dining 120 X 90cm shall be two coats of French polish of approved shade as directed by Engg-in-Charge. Ref Drg 289/139/273/230 All as specified and directed by Engineer-in-Charge. |
| 91 | Almirah Med with shelves (Wooden) DRG NO FD- 108: Removing the existing unserviceable part and S&F following similar new part as per Drg and as directed by Engr-in-Charge. |
| 92 | Top plank |
| 93 | Back side |
| 94 | Both sides |
| 95 | Shelf |
| 96 | Hasp and Stapple and S&F new Decorative Stainless Steel Hasp and Staple of 75/100mm (3/4 Inch) in the Furniture as per Drg all as speicifed and directed. |
| 97 | Shutters/ Doors |
| 98 | Handle 4 inch |
| 99 | Scraping and removing of all dusts including sand papering & preparing of surface and filled with wax / wooden putty and finishing with two coats of French polish to match with the colour with high class glossy finish in the furniture as per drawing all as specified and as directed. Please Enable Macros to View BoQ information |
