|
| 1 | Demolition of brick work, PCC block or stone masonry built in cement mortar all as specified and as directed. |
| 2 | Material & labour for precast cement concrete block masonry with solid blocks Type C1, 1:3:6 (20mm graded aggregate) exc 10 cm in width and set in cement mortar 1:6 all as specified and as directed. |
| 3 | Material & labour Laterite stone walling of regular coursed , well bonded bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and as directed. |
| 4 | Walling of squared rubble, regular coursed, well bonded, bedded & solidly hearted, built in Cement mortar 1:6 all as specified and as directed. |
| 5 | Material & labour for laterite stone pitching of squared rubble, regular coursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete in road side berms etc all as specified and as directed. |
| 6 | Demolition of cement Concrete of any description and in any position not otherwise specifically provided for all as specified and as directed. |
| 7 | Material & labour 100 mm thick cement concrete 1:2:4 Type B-1, (using 20mm graded granite stone aggregate) as in hard standing make impressions while concrete is green all as specified and as directed. |
| 8 | Material & labour for plain cement concrete 1:2:4 Type B- 1 (using 20mm graded stone aggregate) as in road berms and finishing top surface even and rough complete all as specified and as directed. |
| 9 | Forming Contraction (Dummy) joints 65mm deep x 10mm wide,filled with sealing compound Grade 'A' including necessary formwork etc complete all as specified and as directed. |
| 10 | Material & labour Providing precast cement concrete in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings. kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, kerbs etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throat- ing etc. and setting in mortar complete with joints to match,Type C1, 1:3:6 using 20 mm graded aggregate exc. 10 cm in width and setting in mortar 1:6, complete all as specified and as directed. |
| 11 | Material & labour Providing precast reinforced cement concrete in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces etc. and setting in mortar complete with joints to match,Type B1, 1:2:4 using 20 mm graded aggregate exc. 10 cm in width and setting in mortar 1:6, complete all as specified and as directed. |
| 12 | Material & labour Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified and as directed. |
| 13 | Material & labour for 75mm thick moorum filling as in berms including spreading, levelling, watering and well ramming and rolling with 8 to 10 power road roller / with vibratory roller HD 99 VV or equilent roller to required gradient and camber complete all as specified and as directed. |
| 14 | Dismantling stone slab and tiles of any description or thickness in floors, landings aprons etc.. laid bedded and pointed in any mortar all as specified and as directed. |
| 15 | Material & labour for chequered cement concrete tiles 250x250x25mm / 300x300x25mm thick in floors, with mixture of grey cement and pigments, set, jointed and pointed in neat cement slurry over and including 20mm thick screed bed in CM 1:6 all as specified and as directed. |
| 16 | Material & labour for machine cut granite stone slab 20mm thick of approved colour and shade as in floors laid over 20mm thick screed bed in CM 1:6; and jointed in grey cement slurry and pointed with white cement with admixture of pigment to match the shade of the slab including grinding and polishing complete all as specified and as directed. |
| 17 | Rounding to edges of stone slabs to one edge, such as in steps and other similar situations all as specified and as directed. |
| 18 | Stone grit for cushion bed below interlocking paver blocks complete all as specified and as directed. |
| 19 | Material & labour Machine pressed precast concrete 80 mm thick interlocking paver block with grey cement and pigment of any size and shape confirming to IS 15658-2006, M-40 Grade as approved by E-I-C laid in flooring and joints filled/broomed with fine sand all as specified and as directed. |
| 20 | All as per Serial item No.19 here in before but except tiles all as specified and as directed. |
| 21 | Dismantling wrought iron or mild steel work of any description all as specified and as directed. |
| 22 | Supply & fix post and strut in fencing including cutting tops to shape as directed drilling holes notching for wire flat iron fillet ( for securing wire mesh) in including all necessary drilling bolting and rivetting conforming to Fe-290 Gd-165 all as specified and as directed. |
| 23 | Supply & fix mild steel screw bolt ( maching made) with hexagonal or square head at one end and screwed the other with washer n.exc 5 cm long dia bolt 5 to 10mm all as specified and as directed. |
| 24 | Supply & fix steel work in tubular trusses including special shaped washers etc. complete using ERW or induction butt welded tubes conforming to IS 4923-1968 Grade St-240 for square or rectangular tube complete all as specified and as directed. |
| 25 | Supply & fix Mild steel work as in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, Tee, angle channel or flat sections) including distance pieces, cleats etc.(Fe-410-W(Gde E-250)Quality-A) all as specified and as directed. |
| 26 | Supply & fix Plates (plain or chequered) channels. Square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment (Fe-410W, Gde E-165, Qlty-A) including necessary cutting in wall all as per specified and as directed. |
| 27 | Dismantling fencing wire mesh, any type all as specified and as directed. |
| 28 | Supply & fix PVC coated chain link fencing ( mesh 50 mm X 50 mm size) minimum nominal dia of wire 4 mm ( including pvc coating ) fixed to fencing posts using suitable bolts and nuts complete all as specified (nuts and bolts shall be measured seperately) complete all as specified and as directed. |
| 29 | Material & labour Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even & smooth without using extra cement ) all as specified and as directed. |
| 30 | Material & labour rendering 15mm thick on stone masonry external surfaces in cement mortar 1:4 and finish the surface even and smooth all as specified and as directed. |
| 31 | Material & labour Struck pointing to squared rubble, coursed or uncoursed Cement mortar 1:3 all as specified and as directed. |
| 32 | Preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer all as specified and as directed. |
| 33 | Dismantling plain or corrugated steel sheeting / galvalume sheets, any gauge, thickness as in roof covering including aluminium frame complete all as specified and as directed. |
| 34 | Supply & fix Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet corrugated/Mangalour tile pattern of 0.50 mm thick of an colour having tensile strength of as in roof covering/cladding to wall, fixed with self tapping screws with bitumen washer complete all as specified and as directed. Please Enable Macros to View BoQ information |
