|
| 1 | Dismantling single layer of Mangalore pattern tiles including ridge in roofing all as specified and as directed. |
| 2 | Dismantling plain or corrugated steel sheeting / galvalume sheets, any gauge, thickness as in roof covering including aluminium frame complete all as specified and as directed. |
| 3 | Dismantling wrought iron or mild steel of any description not otherwise provided for all as specified and as directed. |
| 4 | Supply & fix in repairs Anodised aluminium frame for roofing tiles with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed. |
| 5 | Material & labour, roof tiles Mangalore pattern interlocking at side joints, laid dry all as specified and as directed. |
| 6 | Material & labour, ridge or hip tiles to suit Mangalore pattern or roofing tiles bedded and jointed in cement mortar 1:6 using water proffing compound all as specified and as directed. |
| 7 | Material & labour for preparation of new MP roof tile surfaces by cleaning the tiles and applying two coats of antifungal paint over a coat of primer all as specified and as directed. |
| 8 | Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws with bitumen washer all as specified and as directed. |
| 9 | Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws with bitumen washer all as specified and as directed. |
| 10 | Supply & fix steel work in tubular trusses (tubular, angle, square and rectangular etc ) including erection shaped washer etc. complete using ERW or induction butt welded tubes. conforming to IS 1161-1998 grade St-240 for round tubes complete all as specified and as directed. |
| 11 | Erection and fixing only steel work in tubular trusses (tubular, angle, square and rectangular etc ) including shaped washer etc. complete using ERW or induction butt welded tubes. conforming to IS 1161-1998 grade St-240 for round tubes complete all as specified and as directed. |
| 12 | Material & labour Preparation of new steel surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer all as specified and as directed. |
| 13 | Supply & fix in repairs Mortice lock brass body, 100/150 mm, 4 levers vertical type complete all as specified and as directed. |
| 14 | Supply & fix in repairs 75 mm hasp and staple mild steel safety type, stove enamelled black, including bolt to hinge plate and fixed with screws all as specified and as directed. |
| 15 | Supply & fix in repairs floor door stopper 150mm size aluminium alloy body and tongue double legged, anodised with hard drawn steel spring fixed to door all as specified and as directed. |
| 16 | Supply & fix in repairs aluminum (die cast) body door closer hydraulically regulated designation No. 3 universal type suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg all as specified and as directed. |
| 17 | Supply & fix in repairs aluminum alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminum wire staples all as specified and as directed. |
| 18 | Material & labour in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed all as specified and as directed. |
| 19 | Supply & fix in repairs anodised aluminium snap grid frame work for false ceiling with 605mm 605mm size, consisting of main Tee of SIze 123.50mmx36.50mmx1.50mm, cross Tee of size 23.50mm×23.50mm x1.50mm and wall angle of size 1.50 x1.50mm of approved make including all necessary cuttings, fixing of aluminium section firmly in pesition with and including steel hangers 6 mm dia G.I. wire (upto 1200 mm end level fixed to roof slabs by means of ceiling cleats made out of G.I. mm size 60 mm long and expansion hold fasteners 40 mm long in soffit slab/walls with and including 4mm thick non-abestos fibre cement building boards panels 600 mm x 600 mm size including taking down of old false ceiling complete all as specified and as directed. |
| 20 | Supply & fix in repairs 18/19mm thick pre-laminated particle board exterior grade, one side decorative choice lamination and other side balancing white lamination, fixed with screws to wooden / aluminium frame work as in cupboard shutters all as specified and as directed. |
| 21 | Supply & fix in repairs 9mm thick pre-laminated particle board exterior grade, one side decorative choice lamination and other side balancing white lamination, fixed with screws to wooden / aluminium frame work as in cup board shutters all as specified and as directed. |
| 22 | Material & labour for 4mm thick sheet glass plain ordinary quality not exc 0.50 sqm in each pane and glazing with beading complete all as specified and as directed. |
| 23 | Material & labour for 5.5 mm thick sheet glass plain ordinary quality not exc 0.50 sqm in each pane and glazing with beading completeall as specified and as directed. |
| 24 | Supply & fix in repairs vitreous China wash basin,white/coloured (flat back) 550x400mm excluding pillar tap, but including fixing brackets, cutting for and pinning in ends of brackets all as specified. |
| 25 | Supply & fix in repairs pillar taps 15 mm size (with push button fancy type) cast copper alloy, chromium plated screwed down high pressure screwed for iron pipe & fixed complete all as specified and as directed. |
| 26 | Supply & fix in repairs vitreous china, wash down water closet (EWC) with seat cover white/coloured, closed pattern with flat bottom and cover with mild steel (CP) or aluminium hinging device fixed with necessary bolts complete all as specified and as directed. |
| 27 | Supply & fix plastic seat cover (colour) closed pattern with flat bottom suitable for EWC including taking down old cover all as specified and as directed. |
| 28 | Supply & fix in repairs 10 ltrs capacity PVC valveless syphonic action type flushing cistern low level with inlet ball valve, float and handle including brackets all as specified and as directed. |
| 29 | Supply & fix in repairs 15mm bore chromium plated bib taps (with push button fancy type), cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipes all as specified and as directed. |
| 30 | Supply & fix in repairs chromium plated Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as all as specified and as directed. |
| 31 | Supply & fix in repairs 5.5 mm thick bevelled edge mirror 600x450mm, selected quality glass mounted on 6mm thick PVC/AC building board/commercial plywood and fixed to wooden plugs with chromium plated brass screw and cup washers all as specified and as directed. |
| 32 | Supply & fix in repairs 32mm dia PVC flexible waste pipe for urinals/WHB/sink all as specified and as directed. |
| 33 | Supply & fix in repairs PVC connections 15mm size with PTMT nuts of length 450mm all as specified and as directed. |
| 34 | Demolition of brick work, PCC block or stone masonry built in cement mortar all as specified and as directed. |
| 35 | Material & labour for precast cement concrete block masonry with solid blocks type C1, 1:3:6 (20mm graded aggregate) exc 10 cm in width and set in cement mortar 1:6 all as specified and as directed. |
| 36 | All as per srl item No 35 here -in before except PCC blocks all as specified and as directed. |
| 37 | Dismantling floor hearth or wall tiling including cement mortar bedding and rubbish of the premises all as specified and as directed. |
| 38 | Material & labour for coloured Non-skid ceramic tiles (square/rectangular) 7 to 8 mm thick in floors, area of each tile exc.0.06 sqm but n.exc 0.11 sqm, set and jointed in neat cement slurry and pointed in white cement mixed with matching pigment over and including 20mm thick screed bed in CM 1:6 all as specified and as directed. |
| 39 | Material & labour for coloured Non-skid ceramic tiles (square/rectangular) 7 to 8mm thick in floors, area of each tile exc.0.11 sqm but n.exc 0.18 sqm, set and jointed in neat cement slurry and pointed in white cement mixed with matching pigment over and including 20mm thick screed bed in CM 1:6 all as specified and as directed. |
| 40 | Material & labour for Glazed ceramic coloured tiles 350x250x7mm / 450x350x7mm thick in vertical surfaces of stone/brick wall, set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15mm thick backing coat plaster in CM 1:4 all as specified and as directed. |
| 41 | Material & labour for vitrified coloured ceramic tiles 10mm thick (square/rectangular), light shade polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set with or without spacers and jointed in neat cement slurry and pointed in white or coloured cement /epoxy to match the shade including 20mm thick screed bed in CM 1:4 all as specified and as directed. |
| 42 | Material & labour for vitrified ceramic tiles 10mm thick (square/rectangular), light shade polished, area of each tiles not exceeding 0.36 sqm, in skirting/dado etc. set and jointed in neat cement slurry and poointed in white or coloured cment to match of light shade including 15mm thick backing coat plaster in CM 1:4 all as specified and as directed. |
| 43 | Material & labour for vitrified ceramic tiles 10mm thick (square/rectangular), light shade polished, area of each tiles not exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match of light shade including 20 mm thick screed bed in CM 1:4 all as specified and as directed. |
| 44 | Dismantling stone slab and tiles of any description or thickness in floors, landings aprons etc.. laid bedded and pointed in any mortar all as specified and as directed. |
| 45 | Material & labour for chequered cement concrete tiles 250x250x25mm / 300x300x25mm thick in floors, with mixture of grey cement and pigments, set, jointed and pointed in neat cement slurry over and including 20mm thick screed bed in CM 1:6 all as specified and as directed. |
| 46 | Material & labour for machine cut granite stone slab 20mm thick of approved colour and shade as in floors laid over 20mm thick screed bed in CM 1:6; and jointed in grey cement slurry and pointed with white cement with admixture of pigment to match the shade of the slab including grinding and polishing complete all as specified and as directed. |
| 47 | Rounding to edges of stone slabs to one edge, such as in steps and other similar situations all as specified and as directed. |
| 48 | Stone grit for cushion bed below interlocking paver blocks complete all as specified and as directed. |
| 49 | Material & labour Machine pressed precast concrete interlocking paver block any shape and size conforming to IS 15658-2006 of 80 mm thickness. M-40 grade with grey cement and pigment all as specified and as directed. |
| 50 | All as per srl item No.49 here-in before, but except tiles all as specified and as directed. |
| 51 | Taking down cement or cement lime plaster on brick or concrete surfaces including raking out joints, hacking for key and scrubbing down with water all as specified and as directed. |
| 52 | Material & labour for 15mm thick rendering in CM 1:4 on fair faces of brick work or concrete surfaces finished fair and even all as specified and as directed. |
| 53 | Material & labour for 10mm thick rendering in CM 1:6 on fair faces of brick work or concrete surfaces finished fair and even all as specified and as directed. |
| 54 | Material & labour for 10mm thick rendering in CM 1:3 on fair faces of brick work or concrete surfaces finished fair and even all as specified and as directed. |
| 55 | Material & labour for preparation of newly plastered wall surfaces and applying two coats of acrylic emulsion distemper over a coat of chalk whiting all as specified and as directed. |
| 56 | Material & labour for preparation of newly plastered surfaces of wall and applying two coats of cement base paint all as specified and as directed. |
| 57 | Taking down aluminium shutters exc 1.00 sqm and n exc 2 sqm each (without taking out frame) and refixing in the same positon after carrying out repairs and provision of aluminum tie rod at top and bottom rails all as specified and as directed. |
| 58 | Supply & fix Ceiling tiles for Mangalore pattern tile roofing, laid dry etc complete including dismantling of existing broken ceiling tiles complete all as specified and as directed. |
| 59 | Supply & fix in repairs rotational moulded polyethylene water storage tanks (cylinderical vertical with closed top) hoisted and fied in position all as speciifed in SSR Part I of capacity 500 ltrs with ball brass valves, high pressure, with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed with dia of pipe 25mm all as specified and as directed. |
| 60 | All as per srl item No.59 here-in before, but 1000 ltr capacity all as specified and as directed. |
| 61 | All as per srl item No.59 here-in before, but 2000 ltr capacity all as specified and as directed. |
| 62 | Supply & fix in repairs 20 mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed all as specified and as directed. |
| 63 | Supply & fix in repairs 25 mm Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed all as specified and as directed. |
| 64 | Supply & fix in repairs 25 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed all as specified and as directed. |
| 65 | Supply & fix in repairs 150 mm anodized aluminium barrel tower bolt of extruded section all as specified and as directed. |
| 66 | Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. of capacity of tanks exc 250 & n.exc 500 litres all as specified and as directed. |
| 67 | Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. of capacity of tanks exc 500 & n.exc 1000 litres all as specified and as directed. |
| 68 | Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc. of capacity of tanks exc 1000 & n.exc 2000 litres all as specified and as directed. |
| 69 | Supply & fix 20 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking up or down old steel tubing and connections, 20 mm dia complete all as specified and as directed. |
| 70 | Supply & fix 25 mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking up or down old steel tubing and connections, 25 mm dia complete all as specified and as directed. |
| 71 | Material & Labour for providing and fixing in repairs stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement all as specified and as directed. |
| 72 | Material & Labour for preperation of old decorated surfaces and applying one coat of sandtex matt finish on wall all as specified and as directed. |
| 73 | Material & Labour for preparation of old treated ceiling surfaces and applying one coat of white wash on ceiling complete all as specified and as directed. |
| 74 | Material & Labour for preparation of old treated ceiling surfaces and applying one coat of oil emulsion distemper complete all as specified and as directed. |
| 75 | Material & Labour for preparation of old decorated wall surfaces and applying one coat of oil bound distemper complete all as specified and as directed. |
| 76 | Material & Labour for preparation of old treated surfaces and applying one coat of acrylic emulsion paint (interior grade) on wall all as specified and as directed. |
| 77 | Material & Labour for complete removal of existing treatment scrapping, brooming and applying two coats of acrylic emulsion paint (interior grade) on wall over a coat of acrylic primer over wall care putty to obtain smooth and even surface all as specified and as directed. |
| 78 | Material & Labour for preparation of old treated surfaces and applying one coat of acrylic emulsion paint (interior grade) on ceiling all as specified and as directed. |
| 79 | Material & Labour for preparation of old treated surfaces and applying one coat of acrylic emulsion paint (exterior grade) on wall all as specified and as directed. |
| 80 | Material & Labour for preparation of old painted steel/iron surfaces exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 81 | Material & Labour for preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of epoxy paint complete all as specified and as directed. |
| 82 | Material & Labour for preparation of old treated wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 83 | Material & Labour for PVC tiles / sheets 3.00 mm thickness, laminated plain coloured, marbled mosaic or mottled finish, laid with approved rubber based adhesive in floors all as specified and as directed. Please Enable Macros to View BoQ information |
