|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: Garrison Engineer (AF) Gorakhpur Name of Work: REPAIR / MAINT OF STEEL& WOODEN FURNITURE AT 4 AFSB VARANASI . Contract No.: GE(AF)/GKP/E-23 OF 2026-27 File No. 9461/E8 Serial Page No.18 Name of the Bidder/ Bidding Firm / Company : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of item Item Code / Make Quantity Units Estimated Rate inRs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e. DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit, if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes inRs. P TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Sofa Chair single seat (Small) FD-358 : Removing the unserviceable seat and back from sofa chair and S&F new cushion for seat and back shall be of U foam first quality 75 mm and 50 mm thick respectively fixed over 12mm ply wood shall be covered with good quality tapestry cloth as approved by GE. Hard PVC ring 25 mm dia shall be screwed to the bottom of legs and remaining all as per drawing , sepecified and directed . |
| 3 | Table dining 1200 mmx900 mm FD-FD/MAP/II/03 : Removing UNSV Top and S&F new top made out of MDF board 18/19 mm thick exterior grade-I type-II of ISI Marks of size 1200 x 900 mm with 2 mm thick PVC edging fixed with strong bonded chemical adhesive through hot pressed ISI markedl as directed and specified. |
| 4 | Foam cushion with tapestry cloth for sofa set 5 seats FD-281: Replacement /removing unserviceable cushion of sofa sets and providing new cushion of cool foam of 32 density 530mmx 500 mm and covered with tapestry cloth and over good quality cover shall be provided for seat and back of sofa sets . Complete all as directed and specified by Engr -in- charge . |
| 5 | Chair dining long back : FD-357 : Removing the unserviceable seat from chair dining . S &F new 50 mm thick synthetic foam of 32 density covered with leatherette rexene made to shape as shown on Drg shall fixed with chair over 10 mm thick ply wood commercial and also leatherette rexene to be fixed on the back of the chair , PVC ring fixed on bottom of the legs of chair, complete all as specified and directed. |
| 6 | Peg Table : FD-277(450x300x380mm)Removing UNSV Top and S&F new top made out of prelaminated MDF board 18/19 mm thick exterior grade-I type-II of ISI Marks of size 450 x 300 mm with 2 mm thick PVC edging fixed with strong bonded chemical adhesive through hot pressed ISI markedl as directed and specified. |
| 7 | Peg Table : FD-277 Removing UNSV legs and S&F new legs made out of 1st class Hard wood teak of size 30x50x360mm all as directed and specified |
| 8 | Peg Table : FD-277 Removing UNSV rails and S&F new long rails made out of 1st class Hard wood teak of size 20x40x430mm all as directed and specified |
| 9 | Bed ply wood top : FD-246 Removing UNSV both side ply wood from foot board of bed and provn of new ply wood 4 mm thick teak ply facing both side with teak wood edging 4mm thick complete all as directed and specified. |
| 10 | Bed ply wood top : FD-246 Removing UNSV both side ply wood from head board of bed and provn of new ply wood 4 mm thick of size 440x900 MM with teak ply facing both side with teak wood edging4mm thick complete all as directed and specified. |
| 11 | Bed ply wood top : FD-246 Removing UNSV ply wood top provn of new ply wood 12 mm thick commercial type ISI marked of size 1980x870mm all as directed and specified |
| 12 | Bed ply wood top : FD-246 Removing UNSV legs and provn of new legs of size 60x60x400MM made to shape as per drawing with new bracket of made out of 1st class hard wood teak all as directed and specified. |
| 13 | Bed ply wood top : FD-246Removing UNSV long rails and S&F of new long rails made out of 1st class hard wood teak of size 35x90x1960mm complete all as directed and specified. |
| 14 | Bed ply wood top : FD-246 Removing UNSV stiffener and S&F stiffener made out of 1st class hard wood teak of size 40x60x880mm, as directed and specified. |
| 15 | Table centre : FD-274/235 Removing the existing unserviceable table centre top and supply and fix new top made out of 18 mm thick pre laminated MDF board Exterior Grade I & type II (PLMDF-12 designation) conforming to 14587:1998 (Re-affirmed 2003)the colour of the Prelaminated MDF board shall be of shade BEIGE/Chocolate/Mehogany/Wall nut chest shade with edges covered with 2mm thick edge bending tape duly machine gluded all as directed by GE/Engr-in-Charge including French polishing to wooden surface to match the existing surfaces of repaired table centre apply one coat French polish on new surfaces and one coat on old surfaces to match uniform shade complete all as specified and as directed. |
| 16 | Table centre : FD-274/235 Removing UNSV legs and S&F new legs made out of 1st class hard wood teak of size 30x60x375mm all as directed and specified. |
| 17 | Table centre : FD-274/235 Removing UNSV long rails and S&F new long rails made out of 1st class hard wood teak 20x50x900mm all as directed and specified. |
| 18 | Table dining for 8 person : FD-273 Removing UNSV Top and S&F new top made out of prelaminated MDF board 18/19 mm thick exterior grade-I type-II of ISI Marks of size 1800x900mm with 2 mm thick PVC edging fixed with strong bonded chemical adhesive through hot pressed ISI markedl as directed and specified, all as directed and specifiedas specified & directed. |
| 19 | Table dining for 8 person : FD-273 Removing unserviceable long rail and provn of new long rail made out of 1st class hard wood teak of size 1800x25x100mm as specified & directed. |
| 20 | Table dining for 8 person : FD-273 Removing unserviceable legs and provn of new legs made out of 1st class hard wood teak of size 40x75x735mm as specified & directed. |
| 21 | Table dining for 8 person : FD-273 Removing of unserviceable short rail and S&F of new short rails made out of 1st class hard wood teak of size 900x25x100mm, as specified & directed |
| 22 | Table dining for 6 person : FD-273 Removing UNSV Top and S&F new top made out of prelaminated MDF board 18/19 mm thick exterior grade-I type-II of ISI Marks of size 1500x900 0mm with 2 mm thick PVC edging fixed with strong bonded chemical adhesive through hot pressed ISI markedl as directed and specified, all as directed and specifiedas specified & directed. |
| 23 | Table dinning 6 person : FD-273 Removing UNSV legs provn of new legs made out of 1st class hard wood teak of size 40x75x735mm and tightening of legs with new bracket of teak wood all as directed and specified. |
| 24 | Table dinning 6 person : FD-273 Removing UNSV long rails and S&F new long rails made out of 1st class hard wood teak of size 1500x25x100mm, all as directed and specified. |
| 25 | Table dinning 6 person : FD-273 Removing UNSV short rails and S&F new short rails made out of 1st class hard wood teak of size 900x25x100mm, all as directed and specified. |
| 26 | Table dining f150 Cm x90Cm (Table dining 5 persons ) : FD/MAP-II/03Removing UNSV Top and S&F new top made out of prelaminated MDF board 18/19 mm thick exterior grade-I type-II of ISI Marks of size 1500x900 0mm with 2 mm thick PVC edging fixed with strong bonded chemical adhesive through hot pressed ISI markedl as directed and specified, all as directed and specifiedas specified & directed. |
| 27 | Table dinning 6 person : FD-273 Removing UNSV legs and provn of new legs made out of 1st class hard wood teak of size 40x75x735mm and tightening of legs with new bracket of teak wood all as directed and specified. |
| 28 | Table dinning 6 person : FD-273 Removing UNSV long rails and S&F new long rails made out of 1st class hard wood teak of size 1500x25x100mm, all as directed and specified. |
| 29 | Table dinning 6 person : FD-273 Removing UNSV short rails and S&F new short rails made out of 1st class hard wood teak of size 900x25x100mm, all as directed and specified. |
| 30 | Table writing : FD-275/249 Removing UNSV Top and S&F new top made out of prelaminated MDF board 18/19 mm thick exterior grade-I type-II of ISI Marks of size 1145x600 mmwith 2 mm thick PVC edging fixed with strong bonded chemical adhesive through hot pressed ISI markedl as directed and specified, all as directed and specifiedas specified & directed. |
| 31 | Table writing : FD-275/249 (1145x600x760mm)Taking out UNSV ply wood from drawer box and provn of new drawer box made with 6 mm thick new ply wood commercial ISI marked all as directed and specified. |
| 32 | Table writing : FD-275/249 Taking out UNSV ply wood from drawer and provn of 6 mm thick new ply wood commercial type and tightening of front portion of drawer, all as directed and specified. |
| 33 | Table writing : FD-275/249 Taking out UNSV Knob and S&F new CP knob 40x40 mm size all as directed and specified. |
| 34 | Table writing : FD-275/249 Removing UNSV legs S&F new legs made with teak wood of size 35x35x735mm, all as directed and specified. |
| 35 | Teapoy : FD-232 Removing UNSV Top and S&F new top made out of prelaminated MDF board 18/19 mm thick exterior grade-I type-II of ISI Marks of size 600x450mm with 2 mm thick PVC edging fixed with strong bonded chemical adhesive through hot pressed ISI markedl as directed and specified, all as directed and specifiedas specified & directe |
| 36 | Teapoy : FD-232 Removing UNSV legs and S&F new legs made out of 1st class hard wood teak of size 45x45mm at top cut to shape 25x25mm at botom and 520mm long, all as directed and specified. |
| 37 | Teapoy : FD-232 Removing UNSV rails and S&F new rails made out 1st class hard wood teak of size 19x40x450mm, all as directed and specified. |
| 38 | Chair easy : FD-229 Removing UNSV front legs and S&F new legs made out of 1st class hard wood teak wood of size 545x55x25mm made to shape as per drawing complete all as specified and directed. |
| 39 | Chair easy : FD-229 Removing UNSV arms and S&F new arms made out of 1st class hard wood teak of size 610x65x25mm made to shape as per drawing complete all as specified and directed. |
| 40 | Chair easy : FD-229 Removing UNSV rear legs and S&F new legs made out of 1st class hard wood teak of size 425x55x25mm made to shape as per drawing complete all as specified and directed. |
| 41 | Chair easy : FD-229 Removing UNSV back or front rails and S&F new front rails of size 50x25x510 mm made out of 1st class hard wood teak all as directed and specified |
| 42 | Chair easy : FD-229 Removing UNSV cane bead and S&F of new cane bead made with teak wood as specified & directed. |
| 43 | Chair easy : FD-229 Removing UNSV side rails and S&F new side rails made out of 1st class hard wood teak of size 70x40x575mm made to shape as per drawing complete all as specified and directed. |
| 44 | Chair dinning : FD-225 & 279 Removing UNSV side rails and S&F new side rails made out of 1st class hard wood teak of size 65x30x440mm complete all as specified and directed. |
| 45 | Chair dinning : FD-225 & 279 Removing UNSV rear legs and S&F new legs made out of 1st class hard wood teak of size 65x45x835mm made to shape as per drawing complete all as specified and directed. |
| 46 | Chair dinning : FD-225 & 279 Removing UNSV front legs and S&F new legs made out of 1st class hard wood teak of size 65x45x455mm, complete all as specified and directed. |
| 47 | Chair dinning : FD-225 & 279 Removing UNSV stiffener and S&F new stiffener of size 20x25x440 MM made out of 1st class hard wood teak all as directed and specified |
| 48 | Chair dinning : FD-225 & 279 Removing UNSV cane bead and S&F new cane bead made out of 1st class hard wood teak all as directed and specified |
| 49 | Chair writing : FD-280 Removing UNSV arms and S&F new arms made out of teak wood of size 60x25x510mm made to shape as per drawing complete all as specified and directed. all as directed and specified |
| 50 | Chair writing : FD-280 Removing UNSV front legs and S&F new legs made out of teak wood of size 55x30x685, complete all as specified and directed. |
| 51 | Chair writing : FD-280 Removing UNSV rear legs and S&F new legs made out of teak wood of size 55x30x830mm, complete all as specified and directed. |
| 52 | Chair writing : FD-280 Removing UNSV side rails and S&F new side rails made out of 1st class hard wood teak of size 30x65x470mm, complete all as specified and directed. |
| 53 | Chair writing : FD-280 Removing UNSV back rest and S&F new back rest made out of 1st class hard wood teak all as directed and specified |
| 54 | Chair writing : FD-280 Removing UNSV stiffener and S&F new stiffener made out of 1st class hard wood teak of size 25x20x500mm,complete all as specified and directed. |
| 55 | Chair writing : FD-280 Removing UNSV cane bead and S&F new cane bead made out of 1st class hard wood teak all as directed and specified |
| 56 | Table dressing gents W/M : FD-31/251Removing UNSV Top and S&F new top made out of prelaminated MDF board 18/19 mm thick exterior grade-I type-II of ISI Marks of size 900 x 380 mm with 2 mm thick PVC edging fixed with strong bonded chemical adhesive through hot pressed ISI markedl as directed and specified. |
| 57 | Table dressing gents W/M : FD-31/251Removing UNSV ply wood from drawer and provn of new ply wood 6mm thick commercial ISI marked complete all as specified and directed. |
| 58 | Table dressing gents W/M : FD-31/251 Removing UNSV Knob and S&F new knob 40x40mm complete all as specified and directed. |
| 59 | Table dressing gents W/M : FD-31/251 Removing UNSV mirror and back ply wood top S&F new mirror 5.5 mm thick of size 366x1220mm Make – Modi guard and new back ply wood 6mm thick commercial ISI marked of required size. |
| 60 | Table dressing ladies with mirror : FD-251Removing U/S both side plywood 4mm thick one side teak ply facing BWP exterior grade of size 380x300 mm complete all as specified and directed. |
| 61 | Table dressing ladies with mirror : FD-251 Removing UNSV Top and S&F new top made out of prelaminated MDF board 18/19 mm thick exterior grade-I type-II of ISI Marks of size 900 x 380 mm with 2 mm thick PVC edging fixed with strong bonded chemical adhesive through hot pressed ISI markedl as directed and specified |
| 62 | Table dressing ladies with mirror : FD-251Removing U/S mirror and back ply and S& F of new mirror 5.5mm thick of size 366x1220mm of Make-Madiguard with new ply wood on back of mirror 6mm th for commercial type ISI marked complete all as specified and directed. |
| 63 | Table dressing ladies with mirror : FD-251Removing U/S Knob and S&F of new aluminium anodised knob 40mm x 40mm heavy duty of quality as per sample available as per drawing and complete all as specified and as directed. |
| 64 | Table bed side : FD-276 Removing UNSV Top and S&F new top made of prelaminated MDF board 18/19 mm thick exterior grade-I type-II of ISI Marks of size 230 x 450 mm with 2 mm thick PVC edging fixed with strong bonded chemical adhesive through hot pressed ISI markedl as directed and specified. |
| 65 | Table bed side : FD-276 Removing U/S back ply and S&F of new back ply 6mm thick commercial type 450x410 mm as specified & directed. |
| 66 | Sofa set 5 seater : FD-281 Removing U/S leg and S&F new leg made with teak wood of size 35x70x530mm complete all as specified and directed. |
| 67 | Sofa set 5 seater : FD-281 Removing U/S long rail and S&F of new long rail made with teak wood of size 35x100x1650mm complete all as specified and directed. |
| 68 | Sofa set 5 seater : FD-281 Removing U/S short rail and S&F of new short rail made out of 1st class hard wood teak of size 35x100x690mm complete all as specified and directed. |
| 69 | Sofa set 5 seater : FD-281 Removing U/S arms and S&F new arms made with teak wood of size 35x70x745mm as per drawing, complete all as specified and directed. |
| 70 | Table Bed side MAP Drg : FD/E6/MAP/15( R) : Removing unserviceable sides and top of the table and S&F new sides & top made out of prelaminated MDF board 18/19 mm thick exterior grade-I type-II of ISI Marks . The shelves/drawer also should be provided/fitted of MDF Board 12 mm thick . The drawers shoud be pulled out/sliding with telescopic channel . New CP handle to be fitted with the drawer.The 18mm square pipe shall be painted two coat of enamel paint after preparation of surface and acoat of primer . Complete all as per drawing , specified and directed by Engr-in- charge . |
| 71 | Table 900x600 mm with drawer FD-283: Removing UNSV Top and S&F new top made out of prelaminated MDF board 18/19 mm thick exterior grade-I type-II of ISI Marks of size 900 x 600 mm with 2 mm thick PVC edging fixed with strong bonded chemical adhesive through hot pressed ISI markedl as directed and specified. |
| 72 | Bin Soiled linen, FD - 244 : Removing unsv four vertical legs and provn of four new legs of size 45 mm x45 mm and 6 mm thick teak veneer face ply wood to be fixed on top of bin soiled and same to be polished after preparatin of surface & Canning on sides shall be done with 2 mm wide , 0.4 mm thick of Shah or premier brand cane . |
| 73 | Table 900x600 mm with out drawer FD-284: Rmoving UNSV Top and S&F new top made out of prelaminated MDF board 18/19 mm thick exterior grade-I type-II of ISI Marks of size 900 x 600 mm with 2 mm thick PVC edging fixed with strong bonded chemical adhesive through hot pressed ISI markedl as directed and specified . |
| 74 | FD- 280/229/279 Removing UNSV cane plastic from chairs of any sorts and re-canning of chairs with 2mm wide cane plastic half round as Godrej pattern Make Premier rest as per drg and direction. |
| 75 | Polishing of wooden furniture Preparation of old wooden surface by scrapping, rubbing and removing old polish, putty, stains etc and cleaning as reqd apply fill the wood/cracks etc by putting yellow ochre etc so as to achieve proper surface for polishing. Apply high gloss French polish/sprit polish in one coat to achieve standard finish all as directed and specified by EIC(a) Chair Dinning FD-279/228/357/MAP Drg |
| 76 | (b) Chair easy FD-229 |
| 77 | (c) Chair writing FD-280 |
| 78 | (d) Table bed side FD-248 |
| 79 | (e) Table dinning 6 person FD-273 |
| 80 | (f) Table dinning 6 person FD/MAP-II/03 |
| 81 | (g) Table centre FD-274 |
| 82 | (h) Teapoy FD-232 |
| 83 | (j) Table peg FD-236/217 |
| 84 | (k) Bed hard with ply wood top FD-246 |
| 85 | (l) Hat stand with mirror FD-233 |
| 86 | (l) Table dressing gents mD-251 |
| 87 | (n) Table dressing ladies FD-251 |
| 88 | (o) Table writing FD-249 |
| 89 | (p) Table dining for 8 personFD-243/273 |
| 90 | (q) Sofa set 5 seats FD-281 |
| 91 | (r) Chair easy with cushion , FD-358 |
| 92 | (s) Book case LP : TP |
| 93 | (t) Table dining 1200 mm x 900 mm , FD/MAP/II/03 |
| 94 | (B) STEEL FURNITURERe-canning of chair Verandah : FD-259 : Repair by way of removing u/s cane plastic 4mm wide and existing paint from chair verandah making surface by way of scrapping rubbing, cleaning for painting till glossy finish and applying one coat of synthetic enamel paint as approved and recanning of chair with 4 mm wide half round cane plastic complete all as specified and directed. |
| 95 | Chair CB steel with arm and without arm : FD-75 Taking down existing seat frame with cane and S & F of best quality of Ist class hard wood shisham wood (Seasoned) frame seat and seat shall be woven with 2 mm wide half round plastic cane and fixing of MS strip 12 mm x 2 mm x 485 mm long at the bottom of seat complete all as specified and directed. |
| 96 | All as per item above above but for back only…..ditto …... |
| 97 | Taking down old hand rest and S/F new hand rest of teak wood of size 460 x 30 x 25 mm made to shape as per drawing complete all as specified and directed. |
| 98 | Almirah large steel : FD-1031Taking down rivet of shelves and portion of new rivet of required size complete all as specified and directed. |
| 99 | Almirah large steel : FD-1031Removing u/s legs from existing almirah and S & F new legs made of 1 mm thick MS sheet as shown in drawing complete all as specified and directed. |
| 100 | Almirah large steel : FD-1031 S & F in repair lock 6 lever fitted with screw complete all as specified and directed. |
| 101 | Almirah large steel : FD-1031 S & F of repair chromium plate handle of 100 mm size as shown in drawing complete all as specified and directed. |
| 102 | Almirah large steel : FD-1031 S & F in repair lock plate of size 100 x 200 x 4 mm of mild steel etc, complete fitted by welding to existing place complete all as specified and directed. |
| 103 | Almirah large steel : FD-1031 S & F in repair bottom sheet of size 485 x 920 mm made out of 1 mm thick MS sheet as per drawing complete all as specified and directed. |
| 104 | Teapoy Verandah : FD-255 Taking down unserviceable top and S&F new top made out of prelaminated MDF board 18/19 mm thick exterior grade-I type-II of ISI Marks of size 900 x 450 mmmm with 2 mm thick PVC edging fixed with strong bonded chemical adhesive through hot pressed ISI markedl complete all as specified and directed. |
| 105 | Almirah med steel : FD-1032 Riveting/Gas welding of broken shelves with providing new rivet complete allas specified and directed . |
| 106 | Almirah med steel : FD-1032 Removing u/s legs and S&F of new legs with mild steel of 1 mm thick as size mentioned in drawing complete all as specified and directed. |
| 107 | Almirah med steel : FD-1032 . S & F in repair lock of 6 lever fitted with screw complete all as specified and directed. |
| 108 | Almirah med steel : FD-1032. S & F in repair chromium plated handle of 100 mm size as shown in drawing complete all as specified and directed. |
| 109 | Almirah med steel : FD-1032 S & F in repair lock plate of size 100 x 200 x 4 mm of mild steel etc, complete fitted by welding to existing place complete all as specified and directed. |
| 110 | Godrej Optimizer Size H-1980x W 915x D 457 (Compactor ). :FD-TP S & F in repair of Key and lock of mobile racks Compacator complete all as specified and directed. |
| 111 | Almirah med steel : FD-1032.S & F in Replacement 1.00 mm thick MS bottom sheet of size 440 x 765 mm as per drawing complete all as specified and directed. |
| 112 | Charpoy GI pipe : FD-220.Removing of u/s Nylon Newar from charpoy GI Pipe and S & F new 12MM thick ply wood top commercial best quality ISI marked of size 900 x 1980mm with 6 Nos screw and one Nos GI stiffener made out of 40x6 mm flat iron fix with nut and bolt at the centre of charpoy complete all as specified & directed. |
| 113 | Charpoy GI pipe : FD-220.Removing of u/s ply wood top from charpoy GI pipe and S& F new 12MM thick ply wood top commercial best quality ISI marked of size 900 x 1980mm and nut and bolt should be fitted with charpoy and also centre of of Charpoy the existing broken flat iron 40x6 mm should be welded complete all as specified & directed. |
| 114 | Charpoy GI pipe : FD-220. Removing unserviceable elbow 3 way 32mm dia and S & F of new elbow 3 way 32mm dia ISI marked complete all as specified & directed. |
| 115 | Charpoy GI pipe : FD-220 Removing unserviceable broken long rails and providing new rail made out of 32 mm dia med gde GI pipe 1870 mm long. |
| 116 | Charpoy GI pipe : FD-220 Taking out broken leg/short rail, cutting damaged threaded portion or cutting pipe at any point as directed and making thread and assembling as directed. Note : Old long received from item No 91 shall be used for leg or shrot rail. |
| 117 | Bunk Bed , FD-TP : Removing of u/s ply wood top from bunk bed and provn of new 18/19 MM thick ply wood top commercial best quality ISI marked of size 900 mm x 1980mm after welding of cracked and broken stiffener and other broken portions and welded portion to be smooth by scrubbing through snad paper/grinding . |
| 118 | Bed hard steel (MAP Drg) : FD/E6/MAP/08( R)Removing of u/s ply wood top from Bed hard steel (MAP Drg) and S& F new 12MM thick ply wood top commercial best quality ISI marked of size 900 x 1980mm and ply should be fitted with nut and bolt with stiffiener of bed hard steel complete all as specified & directed. |
| 119 | Steel dining chair with out arms -TP : Removing unserviceable seat from chairs and S&F new seat made of pressed ply wood of 12 mm thick in round shape of 415 mm dia and consisting of new 50 mm thick synthetic foam of 32 density covered with leatheertte rexene made to shape and shall fixed over 12 mm thick ply wood commercial . Apply lickel chromium polish on steel frame of chair after preparation of surface to e provided rubber shoes in bottom of the legs . complete all as directed and specified . |
| 120 | Running welding of steel furniture Running welding in repair to steel furniture by removing bends, broken members shall be welded to existing places welded portion shall be furnished by grinding , rubbing and shall be applied with two coat of synthetic enamel paint to match with existing surface after preparation of surface over one coat of red oxide primer. |
| 121 | Class room desk of size 1.20 Mtr x ,45 mtr -TP : Class room desk should be painted with synthitic enamel paint over a coat of redoxide after preparation of surface by scrubbing with sand paper , rubbing and cleaning and also provicde PVC shoes for legs complete all as per specified and directed. |
| 122 | Table office clk steel : FD-84 /1004M&L for spot welding to existing broken legs ,stiffener & repair and get in smoothi functioning of drawers of and also removing the old unserviceable top and S&F new top made out of prelaminated MDF board 18/19 mm thick exterior grade-I type-II of ISI Marks of size 1200 mm x 600mm with 2 mm thick PVC edging fixed with strong bonded chemical adhesive through hot presse ll as directed and specifiedcomplete all as directed and shown on drg . |
| 123 | Table 900x600mm steel with drawer FD-1008 : Removing U/s top and S& F new topmade out of prelaminated MDF board 18/19 mm thick exterior grade-I type-II of ISI Marks of size900 mm x 600mm with 2 mm thick PVC edging fixed with strong bonded chemical adhesive through hot pressed all as directed and specified. U/s lock of drawer of table should be replaced with new lock and Steel frame of the table shall be painted with synthetic enamel paint over a coat of red-oxide after perparation of surface by scubbing, rubbing and cleaning complete all as specified and directed . |
| 124 | Table office officers steel : FD-84 Removing U/s top and S& F new topmade out of prelaminated MDF board 18/19 mm thick exterior grade-I type-II of ISI Marks of size1800 mm x 870 mm with 2 mm thick PVC edging fixed with strong bonded chemical adhesive through hot pressed all as directed and specified. U/s lock of drawer of table should be replaced with new lock and Steel frame of the table shall be painted with synthetic enamel paint over a coat of red-oxide after perparation of surface by scubbing, rubbing and cleaning complete all as specified and directe |
| 125 | Painting of steel furniture : Preparation of surface by way of scrapping, rubbing, cleaning, removing old paint stain etc and applying one coat synthetic enamel paint of required shade as approved by spray painting. (a) Almirah large steel : FD-1031 |
| 126 | (b) Almirah Med steel - FD-1032 |
| 127 | (c) book case L/P steel - FD-90/1028 |
| 128 | (d) Rack adjustable steel 6 tier 600 mm wide x 400m depth - FD-106 |
| 129 | (e) Table office clerk steel - FD-84 |
| 130 | (f) Table office officer steel - FD-84 |
| 131 | (g) Chair CB steel with arms - FD-75 |
| 132 | (h) Chair CB steel with out arms - FD-75 |
| 133 | (j) Almirah Med steel 1/2H x1/2S FD-1033 |
| 134 | (k) Almirah large steel 1/2H x1/2S FD-1034 |
| 135 | (l) Locker Steel FD-1029 |
| 136 | (m) Bed hard steel (MAP Drg) FD/E6/MAP/08(R ) |
| 137 | (n) Chait writing steel with cushioned (MAP Drg), FD/E6/MAP/12 |
| 138 | (n) Bunk bed Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
