Tender For Re-Alignment Of Existing Service Wire/Post-Ht In Favour Of Executive Engineer, Kerala Road Fund Board-Pmu, Muvattupuzha-Idukki Division Under Electrical Sectio, Kanjikuzhy, Upputhara-Kerala

TDR : 55740065

Tender Notice
BOQ

6 Days Left

Upputhara , Kerala

Tender Brief : Tender For Re-Alignment Of Existing Service Wire/Post-Ht In Favour Of Executive Engineer, Kerala Road Fund Board-Pmu, Muvattupuzha-Idukki Division Under Electrical Sectio, Kanjikuzhy

Document Fees
₹ 2360 /-

EMD
₹ 23900.0 /-

Tender Value
₹ 9.52 Lakhs /-

Submission Date
06-06-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Labour charges for loading HT PSC pole from the stacking place and unloading the same at work site (transportation by any vehicle).
2	Labour charges for loading HT A type pole from the stacking place and unloading the same at work site (transportation by any vehicle).
3	Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 numbers of poles excluding loading& unloading charges.
4	Dismantling one damaged 11kV PSC/RCC pole after disconnecting stays, strut etc. attached thereon and stacking the same.
5	Dismantling (without damage) one 11kV PSC/RCC pole after disconnecting stays, strut etc. attached thereon and stacking the same.
6	Dismantling (without damage) one 11kV A type pole after disconnecting stays, strut etc. attached thereon and stacking the same.
7	Dismantling (without damage) one HT PSC/RCC Strut pole including removal of clamps and stacking.
8	Dismantling (without damage) one km 11kV line (three conductors) including dismantling cross arm, insulators, disc, disconnecting jumper connection, rolling the conductor and stacking the materials.
9	Dismantling (without damage) one HT stay including digging pit in all classes of soil and backfilling, and bringing back to section store.
10	Dismantling (without damage) one Channel cross arm from existing DP structure and bringing back to section store
11	Dismantling (without damage) one AB switch from existing structure and bringing back to section store.
12	Dismantling transformer station with transformer erected in DP structure by dismantling HT Double Pole Structure using PSC pole after disconnecting stay wires, 10 channel cross arms,AB switch, DO fuse, LA, GI earthing leads, DTR meter with box with metering equipments, CTs, Distribution Box, statutory display boards etc. but excluding the rate of dismantling transformer, earthing, stay sets & fencing.
13	Dismantling one damaged LT PSC/RCC pole after disconnecting stays, strut etc. attached thereon and stacking the same.
14	Dismantling (without damage) one LT PSC/RCC pole after disconnecting stays, strut etc. attached thereon and stacking the same.
15	Dismantling (without damage) LT stay including digging pit in all classes of soil and backfilling.
16	Fitting and erecting one HT PSC Single Pole in position, including fitting cross arm, digging and back filling pit in ordinary soil (as per standards), drawing sufficient length of GI earthing leads from F clamp through V cross arm to the ground for earthing (excluding provision of earthing).
17	Fitting and erecting one HT A type Single Pole in position, including fitting cross arm, digging and back filling pit in ordinary soil (as per standards), drawing sufficient length of GI earthing leads from F clamp through V cross arm to the ground for earthing (excluding provision of earthing).
18	Additional rate for providing one disc set, PG clamp etc. complete, on any type of HT pole for making cut point.
19	Fitting and erecting one HT Double Pole Structure using PSC pole in position including fitting 2 channel cross arms, digging and back filling pit in ordinary soil, drawing sufficient length of GI earthing leads through all cross arms to the ground for earthing (excluding provision of earthing).
20	Fitting and providing one Strut using HT PSC pole including digging and back filling pit in ordinary soil.
21	Fitting and providing one HT Fly stay for 11kV pole using HT PSC pole including digging and back filling pits in ordinary soil, drawing sufficient length of GI earth leads to the ground for earthing (excluding provision of earthing).
22	Additional rate for excavation of one Pit for HT Pole/HT Stay in Laterite.
23	Additional rate for excavation of one Pit for HT Pole/HT Stay in Hard Laterite.
24	Additional rate for excavation of one Pit for HT Pole/HT Stay in Soft Rock.
25	Stringing of one km 11kV line with ACSR Raccoon (3 conductors) after fitting insulators and giving jumper connections including cutting and removing tree branches wherever necessary excluding cut point works.
26	Fitting and erecting one HT Double Pole Structure using PSC pole in position, providing 2 stays, fitting 8 channel cross arms, fitting AB switch, DO fuse, station class LA etc., drawing GI earthing leads (separate GI strip for LA through insulated conduit) to the ground, mounting of 100kVA Transformer on DP structure, clamping with Transformer belt, fixing 2way distribution box, DTR meter with box, giving all HT & LT connections upto OH lines, fixing/sign writing all statutory display boards etc. including digging & back filling pit in ordinary soil excluding provision of pipe earthing, yard fencing and metaling.
27	Providing one Earth using GI earth pipe of size 38.1mm dia, 2.5m length including digging separate pit (0.45x0.45x2.5m) at a minimum distance of 1.5m away from the pole/structure and maintaining standard distance between different earth pipes in ordinary soil & backfilling.
28	Providing one Coil Earth using No.8 GI-earth wire (50mm dia, 115 turns) including digging separate pit (0.45x0.45x1.5m) at standard distance away from the pole/structure in ordinary soil & backfilling.
29	Fitting one set AB switch on existing DP, giving connection and drawing sufficient length of GI earthing leads to the ground for earthing, excluding provision of earthing.
30	Fitting one Additional V cross arm in existing single pole including conveyance of materials.
31	Fitting one Additional 75x40mm, 1.8m Channel cross arm in existing single pole including conveyance of materials.
32	Erecting one LT PSC Pole in position including digging & back filling pit in ordinary soil.
33	Providing Stay for LT poles including digging & back filling pit in ordinary soil.
34	Stringing, shackling, fitting cross arms, insulators and binding, giving jumper connection etc. using ACSR Rabbit for Phase and Neutral, for one km LT single phase 2 wire line including cutting and removing tree branches wherever necessary and conveyance of all materials (except poles) from stacking place.
35	Stringing, shackling, fitting cross arms, insulators and binding, giving jumper connection etc. using ACSR Rabbit for Phase and ACSR Weasel for Neutral, for one km LT three phase 4 wire line including cutting and removing tree branches wherever necessary and conveyance of all materials (except poles) from stacking place.
36	Stringing, shackling, fitting cross arms, insulators and binding, giving jumper connection etc. for one km additional conductor (ACSR Weasel) on existing LT line (where realignment of existing conductor is not required) including cutting and removing tree branches wherever necessary and conveyance of all materials (except poles) from stacking place.
37	Fitting one No. Section fuse on LT line with dropping cables, crimping sockets, connecting with bolt & nut etc.
38	Providing WP support with PSC pole including digging & back filling pit in ordinary soil. excluding transportation of poles.
39	Disconnecting and lowering down the single phase WP service connection with guy wire from the OH line and reconnecting the same after completing the line work.
40	Disconnecting and lowering down the three phase WP service connection with guy wire from the OH line and reconnecting the same after completing the line work.
41	Redoing single phase WP service connection complete including lowering down the guy wire portion, repairing or changing WP wire, GI wire, Fuse unit etc., changing Energy Meter cutout, neutral link etc., if necessary and reconnecting the same including conveyance of material to site from Section office at various location.
42	Dismantling (without damage) one km LT single phase 2 wire OH line conductor by dismantling cross arms, insulators and stacking the conductors in rolls properly.
43	Dismantling (without damage) one km LT three phase 4 wire OH line conductor by dismantling cross arms, insulators and stacking the conductors in rolls properly.
44	Dismantling (without damage) one km LT additional conductor line by dismantling cross arms, insulators and stacking the conductors in rolls properly.
45	Dismantling one section fuse from structure and bringing back to section store.
46	Drilling hole of various sizes on existing Channel/Cross Arm.
47	Providing concrete muffing of size 0.45x0. 45x1.5m (0.5m above GL and 1m below GL). Excavation 0.45x0.45x1m, concrete (1:3:6, 20mm) 0.45x0.45x1.5m, Plastering (1:3) 12mm 0.45x0.45mx5sides.
48	Dismantling one ordinary street light/CFL/LED fitting from existing pole and refitting the same on newly erected pole including disconnecting and reconnecting wires.
49	Dismantling (without damage) one V cross arm/Channel cross arm from existing Pole and bringing back to section store.
50	Fitting and providing one HT Stay for 11kV pole, including digging and back
51	Quoted Amount of BOQ1 in figures
52	GST Rate in percentage Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents
5	Click here to download tender document	Tender Documents
6	Click here to download tender document	Tender Documents

Also Visit

Tenders

Kerala Tenders

Power Generation and Transmission Tenders

Power Transmission Tenders

Overhead Line Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Re-Alignment Of Existing Service Wire/Post-Ht In Favour Of Executive Engineer, Kerala Road Fund Board-Pmu, Muvattupuzha-Idukki Division Under Electrical Sectio, Kanjikuzhy, Upputhara-Kerala

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Sl. No.	Item Description
1	Labour charges for loading HT PSC pole from the stacking place and unloading the same at work site (transportation by any vehicle).
2	Labour charges for loading HT A type pole from the stacking place and unloading the same at work site (transportation by any vehicle).
3	Transporting poles by hired vehicle to a distance upto 5km and carrying upto 4 numbers of poles excluding loading& unloading charges.
4	Dismantling one damaged 11kV PSC/RCC pole after disconnecting stays, strut etc. attached thereon and stacking the same.
5	Dismantling (without damage) one 11kV PSC/RCC pole after disconnecting stays, strut etc. attached thereon and stacking the same.
6	Dismantling (without damage) one 11kV A type pole after disconnecting stays, strut etc. attached thereon and stacking the same.
7	Dismantling (without damage) one HT PSC/RCC Strut pole including removal of clamps and stacking.
8	Dismantling (without damage) one km 11kV line (three conductors) including dismantling cross arm, insulators, disc, disconnecting jumper connection, rolling the conductor and stacking the materials.
9	Dismantling (without damage) one HT stay including digging pit in all classes of soil and backfilling, and bringing back to section store.
10	Dismantling (without damage) one Channel cross arm from existing DP structure and bringing back to section store
11	Dismantling (without damage) one AB switch from existing structure and bringing back to section store.
12	Dismantling transformer station with transformer erected in DP structure by dismantling HT Double Pole Structure using PSC pole after disconnecting stay wires, 10 channel cross arms,AB switch, DO fuse, LA, GI earthing leads, DTR meter with box with metering equipments, CTs, Distribution Box, statutory display boards etc. but excluding the rate of dismantling transformer, earthing, stay sets & fencing.
13	Dismantling one damaged LT PSC/RCC pole after disconnecting stays, strut etc. attached thereon and stacking the same.
14	Dismantling (without damage) one LT PSC/RCC pole after disconnecting stays, strut etc. attached thereon and stacking the same.
15	Dismantling (without damage) LT stay including digging pit in all classes of soil and backfilling.
16	Fitting and erecting one HT PSC Single Pole in position, including fitting cross arm, digging and back filling pit in ordinary soil (as per standards), drawing sufficient length of GI earthing leads from F clamp through V cross arm to the ground for earthing (excluding provision of earthing).
17	Fitting and erecting one HT A type Single Pole in position, including fitting cross arm, digging and back filling pit in ordinary soil (as per standards), drawing sufficient length of GI earthing leads from F clamp through V cross arm to the ground for earthing (excluding provision of earthing).
18	Additional rate for providing one disc set, PG clamp etc. complete, on any type of HT pole for making cut point.
19	Fitting and erecting one HT Double Pole Structure using PSC pole in position including fitting 2 channel cross arms, digging and back filling pit in ordinary soil, drawing sufficient length of GI earthing leads through all cross arms to the ground for earthing (excluding provision of earthing).
20	Fitting and providing one Strut using HT PSC pole including digging and back filling pit in ordinary soil.
21	Fitting and providing one HT Fly stay for 11kV pole using HT PSC pole including digging and back filling pits in ordinary soil, drawing sufficient length of GI earth leads to the ground for earthing (excluding provision of earthing).
22	Additional rate for excavation of one Pit for HT Pole/HT Stay in Laterite.
23	Additional rate for excavation of one Pit for HT Pole/HT Stay in Hard Laterite.
24	Additional rate for excavation of one Pit for HT Pole/HT Stay in Soft Rock.
25	Stringing of one km 11kV line with ACSR Raccoon (3 conductors) after fitting insulators and giving jumper connections including cutting and removing tree branches wherever necessary excluding cut point works.
26	Fitting and erecting one HT Double Pole Structure using PSC pole in position, providing 2 stays, fitting 8 channel cross arms, fitting AB switch, DO fuse, station class LA etc., drawing GI earthing leads (separate GI strip for LA through insulated conduit) to the ground, mounting of 100kVA Transformer on DP structure, clamping with Transformer belt, fixing 2way distribution box, DTR meter with box, giving all HT & LT connections upto OH lines, fixing/sign writing all statutory display boards etc. including digging & back filling pit in ordinary soil excluding provision of pipe earthing, yard fencing and metaling.
27	Providing one Earth using GI earth pipe of size 38.1mm dia, 2.5m length including digging separate pit (0.45x0.45x2.5m) at a minimum distance of 1.5m away from the pole/structure and maintaining standard distance between different earth pipes in ordinary soil & backfilling.
28	Providing one Coil Earth using No.8 GI-earth wire (50mm dia, 115 turns) including digging separate pit (0.45x0.45x1.5m) at standard distance away from the pole/structure in ordinary soil & backfilling.
29	Fitting one set AB switch on existing DP, giving connection and drawing sufficient length of GI earthing leads to the ground for earthing, excluding provision of earthing.
30	Fitting one Additional V cross arm in existing single pole including conveyance of materials.
31	Fitting one Additional 75x40mm, 1.8m Channel cross arm in existing single pole including conveyance of materials.
32	Erecting one LT PSC Pole in position including digging & back filling pit in ordinary soil.
33	Providing Stay for LT poles including digging & back filling pit in ordinary soil.
34	Stringing, shackling, fitting cross arms, insulators and binding, giving jumper connection etc. using ACSR Rabbit for Phase and Neutral, for one km LT single phase 2 wire line including cutting and removing tree branches wherever necessary and conveyance of all materials (except poles) from stacking place.
35	Stringing, shackling, fitting cross arms, insulators and binding, giving jumper connection etc. using ACSR Rabbit for Phase and ACSR Weasel for Neutral, for one km LT three phase 4 wire line including cutting and removing tree branches wherever necessary and conveyance of all materials (except poles) from stacking place.
36	Stringing, shackling, fitting cross arms, insulators and binding, giving jumper connection etc. for one km additional conductor (ACSR Weasel) on existing LT line (where realignment of existing conductor is not required) including cutting and removing tree branches wherever necessary and conveyance of all materials (except poles) from stacking place.
37	Fitting one No. Section fuse on LT line with dropping cables, crimping sockets, connecting with bolt & nut etc.
38	Providing WP support with PSC pole including digging & back filling pit in ordinary soil. excluding transportation of poles.
39	Disconnecting and lowering down the single phase WP service connection with guy wire from the OH line and reconnecting the same after completing the line work.
40	Disconnecting and lowering down the three phase WP service connection with guy wire from the OH line and reconnecting the same after completing the line work.
41	Redoing single phase WP service connection complete including lowering down the guy wire portion, repairing or changing WP wire, GI wire, Fuse unit etc., changing Energy Meter cutout, neutral link etc., if necessary and reconnecting the same including conveyance of material to site from Section office at various location.
42	Dismantling (without damage) one km LT single phase 2 wire OH line conductor by dismantling cross arms, insulators and stacking the conductors in rolls properly.
43	Dismantling (without damage) one km LT three phase 4 wire OH line conductor by dismantling cross arms, insulators and stacking the conductors in rolls properly.
44	Dismantling (without damage) one km LT additional conductor line by dismantling cross arms, insulators and stacking the conductors in rolls properly.
45	Dismantling one section fuse from structure and bringing back to section store.
46	Drilling hole of various sizes on existing Channel/Cross Arm.
47	Providing concrete muffing of size 0.45x0. 45x1.5m (0.5m above GL and 1m below GL). Excavation 0.45x0.45x1m, concrete (1:3:6, 20mm) 0.45x0.45x1.5m, Plastering (1:3) 12mm 0.45x0.45mx5sides.
48	Dismantling one ordinary street light/CFL/LED fitting from existing pole and refitting the same on newly erected pole including disconnecting and reconnecting wires.
49	Dismantling (without damage) one V cross arm/Channel cross arm from existing Pole and bringing back to section store.
50	Fitting and providing one HT Stay for 11kV pole, including digging and back
51	Quoted Amount of BOQ1 in figures
52	GST Rate in percentage Please Enable Macros to View BoQ information

Tender For Re-Alignment Of Existing Service Wire/Post-Ht In Favour Of Executive Engineer, Kerala Road Fund Board-Pmu, Muvattupuzha-Idukki Division Under Electrical Sectio, Kanjikuzhy, Upputhara-Kerala

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us