|
| 1 | Pressure Sand Filter ,iron remoal filter and activated carbon filter |
| 2 | OD176225/2024-2025:Supply and installation of Storage tank, 10,000L, Aqua Tech,Capacity : 10000LMOC : PE, Black, 2 layers- ISI |
| 3 | OD176226/2024-2025:Supply and installation of Dosing Pump, 6LPH @ 10kg/cm2,Dosing Pump : 1No,Type : Diaphragm,Capacity : 6LPH @ 10kg/cm2,Origin : E-dose,Dosing Tank, 100L, PP : 1No |
| 4 | OD176228/2024-2025:Supply and installation of Filter feed pump, 1HP, Single PhaseCapacity : 1HP,Flowrate : 3,000LPH @ 25m HeadPhase : Single Phase,Brand : Kirloskar/Equivalent,Control Panel : 1No |
| 5 | OD176230/2024-2025:Supply, Installation of Control Panel with change over |
| 6 | OD176231/2024-2025:Supply, assembly and installation of pressure sand filter, 3m3/hr,Origin : Pentair/Alfa AerosolMOC : Poly-glass, 1665,Flow Rate : 3,000LPH,Diameter : 400mm,HOS : 1650mm,Volume : 182L,Operating Pressure : 5kg/cm2,Media : Silex (different grade),Multi-port Valve : 1 No, Side Mounted, Manual,Distributors : 1setPressure Gauge : 1No |
| 7 | OD176232/2024-2025:Supply, assembly and installation of iron removal filter, 3m3/hr,Origin : Pentair/Alfa Aerosol,MOC : Poly-glass, 1665Flow Rate : 3,000LPH,Diameter : 400mm,HOS : 1650mm,Volume : 182L,Operating Pressure : 5kg/cm2,Media : Silex (different grade),Katalox Light (Germany), MnO2,Multi-port Valve : 1 No, Side Mounted, Manual,Distributors : 1setPressure Gauge : 1No |
| 8 | OD176233/2024-2025:Supply, assembly and installation of activated carbon filter, 3m3/hr,Origin : Pentair/Alfa Aerosol,MOC : Poly-glassFlow Rate : 3,000LPH,Diameter : 400mm,HOS : 1650mm,Volume : 182L,Operating Pressure : 5kg/cm2,Media : Silex (different grade),Activated Carbon IV 1100,Multi-port Valve : 1 No, Side Mounted, Manual Distributors : 1set,Pressure Gauge : 1No |
| 9 | OD176234/2024-2025:Supply and installation of NRV, 1?,MOC : SS 304,Origin : Enolgas, ITALY |
| 10 | OD176235/2024-2025:Supply and installation of Level Controller |
| 11 | Tank Support |
| 12 | 2.6.1:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer-in-charge.All kinds of soil |
| 13 | 7.1.1:Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) up to plinth level with:Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 14 | 50.6.1.8:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in: CM 1:6 ( 1 cement : 6 coarse sand etc complete |
| 15 | 2.25:Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m. |
| 16 | 5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete |
| 17 | 5.22.1:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelMild steel and Medium Tensile steel bars |
| 18 | 5.1.2:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 19 | 10.1:Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. |
| 20 | 12.1.3:Providing corrugate G.S. sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete ( up to any pitch in horizontal / vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.63 mm thick with zinc coating not less than 275 gm/m2 |
| 21 | OD3278/2025-2026:KSEB Connection charges,lighting connection for pump house including material cost and labour charges ,all works etc..completed Please Enable Macros to View BoQ information |
