Name of Work:- Purchase of lab Equipments for ICE Dept
Sl. No.
Item Description
1
Purchase of Lab Equipments for ICE Dept
2
I/P and P/I Converter (Iemcode:G002) • I/P Converter:(4–20) mA to (3–15) PSI conversion. • P/I Converter:(3–15) PSI to (4–20) mA conversion. • Air Filter Regulator (AFR):20 PSI regulated air supply. • Built-in current source. • 3½ digit LED display for process indication. • Power Supply: 230 V ac, 50 Hz.• • Mounting:Bench-top / panel-mounted trainer configuration.
3
Level Measurement using Float and Sight Glass Indicator- Itemcode: G005Specifications:• Sight glass level indicator. • Float type level indicator. • Power supply:230 V ac, 50 Hz. • Monoblock pump:0.5 HP / 1 HP. • Sump tank.
4
8051Develop ment Board with USB/RS 232 cable to connect with computer (Item code: G008)Specifications:• Communication interface:USB / RS-232. • On-board facilities:8 output LEDs,8 input switches,LDR,Reed switch,8-bit ADC,8-bit DAC. • Display interfaces:Seven-segment display,16 × 2 LCD interface. • Motor interfacing:Stepper motor with driver,DC motor with H-bridge driver
5
8 bit ADC/DAC interface board (Item code: G009)Specifications:•Thermistor / LM35 input in one channel. • Variable input (0–5) V in another channel. • 8 LEDs for digital output indication..• Necessary control signals provided for ADC0809. • 8-bit DAC using DAC0808. • 8-bit digital input from controller. • Single-channel DAC output:(0–10) V.• Power supply:±12 V or ±15 V for analog circuitry
6
Water Level Measurement Trainer Kit using Capacitive Type Transducer (Item code: G020)• Tabletop model with transparent acrylic tank of approximately 50 cm height. • Capacitive type level sensor for continuous level measurement. • Sensor output: (4–20) mA and/or (0–5) V with built-in signal conditioning. • Vertical pump for water circulation from sump to tank. • Flow control valve, overflow, and drainage arrangement. • Digital display for water level indication in cm. • Power supply: 230 V ac, 50 Hz, single phase. • In-built regulated DC power supply for sensor and control circuit. • Mounted on powder-coated MS frame for laboratory use. • Suitable for calibration and study of capacitive level measurement.
7
Flow Measurement using Electromagn etic Flow Meter(Item code: G021)Specifications:• Medium: Water (salt water / bore well water). • Electromagnetic flow measurement: Instantaneous flow rate and totalized flow indication. • Electromagnetic flow meter: Integral mounted type. • Power supply: 90–260 V ac, 50 Hz. • Minimum media conductivity: 15 μS/cm. • Flow rate unit: m³/hr. • Operating pressure: Up to 10 kg/cm².• Electrode material: SS-304 / SS-316 / SS 316L. • Lining material: PTFE / Neoprene / Hard Rubber / PFA. • Line size: 15 NB – 25 NB. • Flow range: 0.1–10 m³/hr. • Connection type: Flanged. • Display: Digital indication for flow rate and totalized flow. • Water pump: Submersible type, 230 V ac, 50 Hz. • Water tank: Approximately 20–25 liters capacity. • Flow control valve provided. • Drain valve and overflow arrangement provided. • Mounted on powder-coated MS frame suitable for laboratory use. Please Enable Macros to View BoQ information
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
