|
| 1 | Percentage BoQ BoQ_Ver3.0 Percentage Normal INR Only INR Select, At Par, Excess (+), Less (-) IOCL Tender Inviting Authority: EXECUTIVE ENGINEER REW DIVISION KATHUA Name of Work;-Repair Work of Community Sanitary Complex Near Hospital (CSC) pyt-Tarafwala and CSC near BDO office Pyt.Mirpur Ram,Block Nagri District Kathua under Sanjay for the year 2026-27 ESTT AMOUNT 1.00 LACS Contract NO:-SANJAY 2026-27 Name of the Bidder/ Bidding Firm / Company : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # S. No. Item Description Item Code / Make Quantity Units Estimated Rate inRs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT inRs. P TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand :6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete |
| 3 | Providing and fixing wash basin withC.I.brackets, 15 mm CP pillar cock, 32 mm CP waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size |
| 4 | Providing and fixing white vitreous china pedestal for wash basin completelyrecessed atthe back for the reception of pipes and fittings. |
| 5 | Providing and fixing white vitreous china pedestal type water closet (European type W.C.pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS:7231, with all fittings and fixtures, complete including cutting and making good the walls and floors wherever requied W.C. pan with lSI marked white solidplasticseatandlid.(Cera/Hindware/Jaquar) |
| 6 | 12 mm thick cement plaster of 1 cement: 6 fine sand mix. |
| 7 | Providing and laying/fixing ceramic Glazed tiles 300X300mmmm (thickness to be specified by the manufacturers) of 1st quality conforming to IS : 15622 of approved make in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigment etc., complete. |
| 8 | Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smoothcomplete.(2mm Thick) |
| 9 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on new work (two or more coats over and including priming coat withwater thinnable cement primer) |
| 10 | Painting steel work with deluxe multi surface paint of required shade to give an evenshade. Two or more coats applied @ 0.90 litre/10sqm over an under coat of primer applied @ 0.80 litre/10sqm of approved brand and manufacture |
| 11 | Providing and fixing 1mm thick M.S. sheet door with frame of 40x40x6mm angle iron and 3mm M.S. gusset plates at the junctions and corners, allnecessary fittings complete, including applying a priming coat of approved steel primer.10.5.1 Using flats 30*6 mm for diagonal braces and central cross piece |
| 12 | Providing and fixing G.I pipe to IS ( Medium Class) with fitting upto 150mm dia & above shall be MS 7mm thick confirming to IS : 3989 including Synthetic enamel paints of approved quality and shade over a coat of approved priming coat ( Shade as per colour code ) and clamps and flange including cutting & making good walls complete.(internal and Exposed on walls) & includes testing of joints. |
| 13 | Providing and Fixing of G.I/PVC fittings |
| 14 | 75 mm PVC pipe |
| 15 | 75 mm plain bend |
| 16 | floor trap 75 mm dia |
| 17 | PVC bal valve 20mm |
| 18 | 20mm Tank nipple |
| 19 | soap dish |
| 20 | towel ring |
| 21 | Providing and fixing 15 mm nominal bore C.P. brass bib cock of approved qualityconforming to IS : 8931 |
| 22 | Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 |
| 23 | Providing and fixing Cp grating of approved quality 100 mm of nominal dia |
| 24 | Providing and fixing on wall face unplasticized Rigid PVC rain water pipes conforming to IS: 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion.(i) Single socketed pipes 110 mm diametre |
| 25 | Wiring for light point/ fan point/ exhaust fan point/ with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required |
| 26 | Providing and fixing motor pump 1/2 hp of Sharp , Bajaj or equivalent make make incl. fitting (complete job) |
| 27 | Labour Engaged for Cleaning of Toilet Floors ,Sewerge waste choked lines. |
| 28 | plumber |
| 29 | sweeper |
| 30 | tile clearance |
| 31 | Add cost of Sigh Board Total in Figures Excess(+) 1.0 Full Conversion INR 100452.0 100452.0 INR One Lakh Four Hundred & Fifty Two Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 INR Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
