|
| 1 | Supply and delivery of clear water vertical wet type submersible pump suitable for bore well conforming to IS : 8034 ( and as amended there after ) with standard MOC for potable clear cold water and BEE 3 star rated and capable of discharging noted 19 M³/hr against head of 28 mtr water column. The pump shall be directly couprled with a continuous rated 2- pole suitable wet type vertical squirel cage induction motor conforming to IS : 9283 (and as amended thereafter),suitable for operation in AC Three phases 415 V,50HZ (category B motor). Test certificate along with characteristic curve should be submitted at the time of delivery.Make: Approve make of PHED. |
| 2 | Supply and delivery of 3 Core 4 sq.mm water proof Flat Submersible Cable. (Make: PHED Approved make) |
| 3 | Supply, delivery at site and storage of 3 Core 10 sq.mm Al. Ar. XLPE Cable for Incomer (Make: PHED Approved make) for 3 Nos. Submersible Pump. |
| 4 | Supply delivery and installation of 3 phase, 415 V, 50 Hz DOL starter controller of over load relay range: 4-6.5 Amp, contactor size-20Amp for operation submersible pumping machinery 3 HP with Ammeter, Voltmeter, Selector switch, Push button with short circuit protection.(Make-PHED Approved make ) |
| 5 | Supply and delivery of 1.5 mtr long 80mm dia UPVC standard type column pipe [cream color] with both side threaded and one end side socketed with registered KPMG. |
| 6 | Supply and delivery of 80mm dia. CI Top & Bottom adopter. |
| 7 | Supplying & fixing medium gauge GI Pipe ( ISI-Medium) Protection with necessary fittings and jointing metarials as required, Dia. 32 mm dia |
| 8 | Supply delivery of 32mm dia PVC pipe of ASTMD 1785 schedule 80 for laying cable through riverbed. |
| 9 | Supply and delivery of 150 mm x 40 mm MS clamp made of 5 mm thick and 24 mm width strip with nuts & bolts for holding 32 mm dia pipe as per direction and as per requirement. |
| 10 | Laying of up to 10 sq mm cable by cutting sand at riverbed and laying through GI pipe with MS clap & refitting as per direction of EIC. |
| 11 | Laying of cable upto 3/4 core 25 sqmm on wall/surface incl. S & F MS saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting. |
| 12 | Laying of two cables upto 35 sqmm in an underground trench in single tier formation (horizontal) the trench size : 680 mm x 760 mm average depth with brick protection on the top of each cable with 8 nos. bricks per Mtr. and 4 nos. bricks per mtr. as separator between the cables including filling the space between the bricks and cables and also the trench with shifted soil, levelling up and restoring surface duly rammed. |
| 13 | Installation of Submersible Pumping machinery to newly sunk tubewell along with column pipe (as requried), top cover, Valves, and Specials of above with protection pipe,and supply of MS clamp,nut bolt, cable gland, sockets etc. making interconnection of the pump delivery line to pump collecting main line (if required) near tubewell with supply of all necessary pipe, reducer/enlarger, GI/MS specials etc. including brick, sand, cement, rod etc and laying & drawing of all cable & cable protection pipe as required and all to complete the job including all connection & testing commissioning as per direction of EIC. |
| 14 | Suitable Kiosk box for cable connection of Al. Ar. XLPE cable with degree of protection IP 65 including suitable legs and 3 Nos. Al. Bus bar for 32 Amps and all necessary earthing arrangement and insulator as per direction of EIC. |
| 15 | Making CC foundation for support of the kiosk box after excavating the earth upto a depth of 0.6 Mtr below the GL including supply of all materials complete with 12 mm thick cement plastering with net cement finishing complete as per direction of EIC (size: 3' x 1' x 5') |
| 16 | Add GST @ 18% |
| 17 | Add CESS @ 1% Please Enable Macros to View BoQ information |
