|
| 1 | Excavation in trenches in soft & loose soil not exceeding 1.5 metre deep and not exceeding 1.5 mtr width and getting out soil including forming bottom surface to required slope/gradient for laying cables/pipes,foundations,laying of cable, shafts, well, cesspits, manholes etc. complete all as specified and directed. |
| 2 | Returning, filling in including spreading, leveling, watering and well ramming in layers of not exceeding 25 cm thick after the cables & pipes etc. are laid, jointed & tested and foundations complete all as specified and directed by Engineer-in-Charge. |
| 3 | Removal of surplus excavated spoil not exceeding 50 Mtr distance and depositing where directed by Engineer-in-Charge at a level not exceeding 1.5 m above the starting point complete all as specified. |
| 4 | M & L for laying plain cement concrete (1:2:4),type B-2 (using 40 mm graded crushed stone aggregate) for supporting of CI/DI/GI pipes 0.60 RM below ground level and upto 5 RM above the ground level smooth finishing without using extra cement, complete all as specified and as directed. |
| 5 | Taking up and down GI tubing including GI fittings complete from trenches/wall/ceiling/floor suitable for 15mm dia pipe, complete all as specified and as directed. |
| 6 | Taking up and down GI tubing including GI fittings complete from trenches/wall/ceiling/floor suitable for 20mm dia pipe, complete all as specified and as directed. |
| 7 | Taking up and down GI tubing including GI fittings complete from trenches/wall/ceiling/floor suitable for 25mm dia pipe, complete all as specified and as directed. |
| 8 | Taking up and down GI tubing including GI fittings complete from trenches/wall/ceiling/floor suitable for 40mm dia pipe, complete all as specified and as directed. |
| 9 | Taking up and down GI tubing including GI fittings complete from trenches/wall/ceiling/floor suitable for 50mm dia pipe, complete all as specified and as directed. |
| 10 | Taking up and down GI tubing including GI fittings complete from trenches/wall/ceiling/floor suitable for 150/100/80 mm dia pipe, complete all as specified and as directed. |
| 11 | Relaying of GI tubing 15 mm dia of any grade ,laid in trenches, after cleaning, rethreading the old screw thread with replacement of unservicable fittings and fixtures complete all as specified and as directed. Note:G I pipe obtained from item No. 05 here-in-before. |
| 12 | Refixing of GI tubing 20 mm dia of any grade ,laid in trenches, after cleaning, rethreading the old screw thread with replacement of unservicable fittings and fixtures complete all as specified and as directed. Note:G I pipe obtained from item No. 06 here-in-before. |
| 13 | Refixing of GI tubing 25 mm dia of any grade ,laid in trenches, after cleaning, rethreading the old screw thread with replacement of unservicable fittings and fixtures complete all as specified and as directed. Note:G I pipe obtained from item No. 07 here-in-before. |
| 14 | Relaying/Refixing of GI tubing 40 mm dia of any grade ,laid in trenches, after cleaning, reading the old screw thread with replacement of unservicable fittings and fixtures complete all as specified and as directed. Note:G I pipe obtained from item No. 08 here-in-before. |
| 15 | Relaying/Refixing of GI tubing 50 mm dia of any grade ,laid in trenches, after cleaning, rethreading the old screw thread with replacement of unservicable fittings and fixtures complete all as specified and as directed. Note:G I pipe obtained from item No. 09 here-in-before. |
| 16 | S&F for GI water tubing medium grade, ISI marked, galvanised, 15 mm bore with all fittings, (such as tee, elbow, socket, union & short pieces) laid in trenches complete all as specified & directed. |
| 17 | S&F for GI water tubing medium grade, ISI marked, galvanised, 20 mm bore with all fittings, (such as tee, elbow, socket, union & short pieces) laid in trenches complete all as specified & directed. |
| 18 | S&F for GI water tubing medium grade, ISI marked, galvanised, 25 mm bore with all fittings, (such as tee, elbow, socket, union & short pieces) laid in trenches complete all as specified & directed. |
| 19 | S&F for GI water tubing medium grade, ISI marked, galvanised, 40 mm bore with all fittings, (such as tee, elbow, socket, union & short pieces) laid in trenches complete all as specified & directed. |
| 20 | S&F for GI water tubing medium grade, ISI marked, galvanised,50 mm bore with all fittings, (such as tee, elbow, socket, union & short pieces) laid in trenches complete all as specified & directed. |
| 21 | S&F for GI water tubing medium grade, ISI marked, galvanised, 80 mm bore with all fittings, (such as tee, elbow, socket, union & short pieces) laid in trenches complete all as specified & directed. |
| 22 | S&F for GI water tubing medium grade, ISI marked, galvanised, 100 mm bore with all fittings, (such as tee, elbow, socket, union & short pieces) laid in trenches complete all as specified & directed. |
| 23 | S&F in repair for MS black water tubing medium grade, ISI marked, 150 mm bore with all fittings, (such as tee, elbow, socket, union & short pieces) laid in treanches complete all as specified & directed. Please Enable Macros to View BoQ information |
| 24 | S&F in repair for MS black water tubing medium grade, ISI marked, 150 mm bore with all fittings, (such as tee, elbow, socket, union & short pieces) laid in treanches complete all as specified & directed. Please Enable Macros to View BoQ information |
