|
| 1 | Contract Details |
| 2 | M&L for cleaning of Nahni/floor trap of bath /kitchen/urinal to1st manhole and then upto the final drop into the septic tanks and soak well /cess pool (including all intermediate manholes) by removing all blockage of any description in any situation in the system complete including removal of solid, waste material and buried it into ground by digging pits, at DIBER area at a distance exc 1.5 Km but not exc 2 Km complete all as specified and directed |
| 3 | M&l for cleaning of bath /kitchen P/S trap, IWC/WC etc ,sewage system ie pipe line from gully trap to 1st manhole and then upto the final drop into the septic tanks and soak well /cess pool (including all intermediate manholes) by removing all blockage of any description in any situation in the system complete including removal of solid , waste material and buried it into ground by digging pits, at DIBER area at a distance exc 1.5 Km but not exc 2 Km .complete all as specified and directed |
| 4 | M&L for cleaning of sewage pipe line from gully trap to 1st manhole and then upto the final drop into the septic tanks and soak well /cess pool (including all intermediate manholes) by removing all blockage of any description in any situation in the system complete including removal of solid , waste material and buried it into ground by digging pits, at DIBER area exc 1.5 Km but not exc 2 Km complete all as specified and directed |
| 5 | M & L for taking up existing cover of manholes of any type any size and any depth dewatering and cleaning of manholes by removing sludge in semi solid state or liquid state by manually or by pressure pump including removal of sludge to a distance exc 1.5 Km but n.exc 2 Km out of DIBER area and buried into ground by digging pits and refixing the cover on manhole properly complete all as specified and directed. |
| 6 | M & L for taking up existing cover of soakage pit/ filter bed of any type/size/ capacity dewatering and removing old unserviceable brick bats by manually or by mechnically after emptying the sewage/ waste water including removal of sludge/ brick bats to a distance exc 1.5 Km but n.exc 5 Km out of MOD land and buried into ground by digging pits of suitable sizes covering these pits with excavated earth properly as directed, and placing the covers of sokage pit/septic tank in position after filling new bats complete all as specified and directed. |
| 7 | M&L for Demolition and breaking up drain pipes jointed in cement mortar of 100 dia pipes as specified |
| 8 | M& L for 100 mm bore sail glazed stoneware drain pipe grade A, laid in tranches and floor jointed as in replacement. complete all as pecified and directed. |
| 9 | M&L 100mm thick concrete bed to drain pipe in PCC (1:4:8) type D-2 using 40 mm graded stone aggregate incl packing under, and haunching against the sides of pipe after they are laid and tested for 100 mm bore complete all as specified and directed |
| 10 | Cutting SGSW 100 mm bore drain pipe in position, incl. jointing socket end with & including new SGSW pipe 600 mm long 100 mm bore grade ‘A’ with packed spun yarn and CM (1:1) incl removing and replacing existing materials and temporary plugging complete . Note:-Excavation as required & earthwork etc shall be measured and paid for separately |
| 11 | Excavation in trenches not exceeding 1.5 mtr deep and not exceeding 1.5 mtr wide in hard/dense soil for laying GI tubing completed all as specified. |
| 12 | Returning, filling in including spreading, leveling, watering and well ramming in layers of 25 cm thick after the cable etc are laid, jointed and tested completed all as specified complete all as specified and directed . |
| 13 | Removal of surplus excavated spoil not exceeding 50 mtr distance and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified. |
| 14 | Demolition of laterite stone masonary walls built in CM and removing the debries to a distance not exc 500 M as directed. |
| 15 | Pre - cast cement concrete 1:3:6 masonry with Grade C-5.0, (20mm graded stone aggregate) with solid blocks masonary withsolid block built in cement mortar 1:6 |
| 16 | M&L rendering 10 mm thick in CM 1:4 on concrete surfaces finished even and smooth without using extra cement. |
| 17 | S&F in repair 75 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on walls/floors wth & incl PVC holding clamps etc complete all as specified & directed. |
| 18 | S&F in repair 75 mm bore PVC (SWR) bends complete all as specified & directed. |
| 19 | S&F in repair 75 mm bore PVC (SWR) vent cowl complete all as specified & directed. |
| 20 | S&F in repair PVC (SWR) junction (single T) equal or unequal 75 mm bore complete all as specified & directed. |
| 21 | S&F in repairs 110mm bore PVC (SWR) pipes, single socketed, in any length with rubber ring joints fixed to walls/floors with & incl necessary fittings complete all as specified & directed. |
| 22 | S&F PVC (SWR) bends 110 mm bore complete all as specified & directed. |
| 23 | S&F PVC (SWR) vent cowl 110 mm bore complete all as specified & directed. |
| 24 | S&F PVC (SWR) junction (single T) equal or unequal 110 mm bore complete all as specified & directed. |
| 25 | M&L Hacking out old broken glass (any thickness), size quality or description from wooden frames/ steel window complete all as specified & directed |
| 26 | S&F 3mm thick sheet glass, ordinary quality, glazing with oil putty or fixed with wooden beads in steel/wooden windows in squares n.exc 0.50sqm each pane at any floor/hight complete all as specified & directed. |
| 27 | S&F in repair PVC waste pipe flexible for WHB of 32 mm complete all as specified |
| 28 | S&F in repair PVC waste pipe flexible for sink of 32 mm complete all as specified |
| 29 | S&F in repair for jet spray SS suitable for water closet pedastral pattern with PVC connection complete all as specified |
| 30 | S&F in repair for Bathroom Faucets Brass hand Jet Spray shower with pipe 1.5mtr SS flexible shower tube pipe complete all as specified |
| 31 | S&F in repair PVC cover for water storage tank of capacity exc 250 Ltr but n.exc 500 ltrs complete all as specified |
| 32 | S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified |
| 33 | Ditto but length 900mm all as specified & directed. |
| 34 | Taking up or down steel tubing 20mm bore and connection including cleaning for refixing complete all as specified and directed. |
| 35 | Refixing old serviceable 20 mm GI tubing and connection in new or old position (Wall, ceiling floor etc.) including necessary fittingS&Fixtures ie. Union, nipple, socket etc. complete all as specified and directed |
| 36 | Supply and Fix 20mm bore medium grade galvanised steel tubing with all fittings and fixed complete to walls and ceiling or laid in floor complete incl ie. Union, nipple, socket etc. complete all as specified and directed. |
| 37 | Supply and Fix for 1000 litre capacity rotational moulded polythylene water storage tanks (cylindrical vertical with closed top ) hoisted and fixed in position including dismantling of existing water tanks of syntax complete all as specified and directed. |
| 38 | Supply and Fix for 500 litre capacity rotational moulded polythylene water storage tanks (cylindrical vertical with closed top ) hoisted and fixed in position including dismantling of existing water tanks of syntax complete all as specified and directed. |
| 39 | S&F in repair Waste Coupling of PTMT (half or full threaded) minimum weight 32 mm /45 gms |
| 40 | S&F for 600 x 450 mm beveled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial ply wood and fixed to wooden plugs with chromium plated brass screws and cup washers in repairs complete all as specified & directed. |
| 41 | S&F in repairs vitreous china squatting pan of ‘Orrisa pattern’ size 580x440mm, white with integral foot rest including replacement of ‘P’ or ‘S’ trap, lime concrete bedding and making good floor complete all as specified and directed. |
| 42 | S&F in repair vitreous china wash down water closet pan (pedestal pattern), white, including plastic seat cover and flushing pipe complete all as specified & directed. |
| 43 | S&F in repairs PVC low level flushing cistern 10 Litre capacity, symphonic action type, white as approved including ball valve, float valve and handle, flush pipe complete all as specified & directed. |
| 44 | S&F in repairs vitreous china wash hand basin, white, size 550 x 400 mm including brackets, chromium placted waste coupling &PVC waste pipe of 32 mm dia complete all as specified & directed. |
| 45 | S&F (in repair) 15 mm bore fancy type long body bib taps brass chromium plated screwed down, screwed for iron pipe or for brass ferrule including flench complete all as specified & directed. |
| 46 | S&F (in repair) 15mm bore pillar taps, brass chromium plated, fancy type screwed down high pressure with or without lettered, hot or cold with long screwed shanks and fly nuts, screwed to iron pipe complete all as specified & directed. |
| 47 | S&F in repair 15 mm dia chromium plated angle cocks/stop valves, brass, screwed down, high pressure with crutch or butterfly handle, flench screwed both ends for iron pipe or for union complete all as specified & directed. |
| 48 | S&F in repairs 15 mm bore concealed stop cock, chromium plated, long shank copper alloy, screwed down with crutch or butterfly handle screwed both ends complete all as specified & directed. |
| 49 | S&F in repair shelf /corner shelf of PTMT fixed with and including chromium plated brass screws and wooden / plastic cleats (Minimum weight 300 grms) |
| 50 | S&F in repairs stainless steel sink with draining board, made out of 1mm thick steel sheet for kitchen with waste pipe, CI cantilever brackets, connecting union overall size 915 x 460mm with bowl size 410 x 330 x 160mm complete all as specified & directed. |
| 51 | S&F in repair centre hole basin mixture 15mm dia chromium plated high pressure all as specified & directed. |
| 52 | S&F in repair plastic water closet seat cover closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device |
| 53 | S&F (in repair) brass chromium plated shower rose 125mm size complete all as specified & directed. |
| 54 | S&F in repairs PVC bib taps, 15 mm bore, standard of PTMT any colour high pressure, screwed for iron pipe and fixed including flench.. (Minimum weight 15 mm bore - 90 gms) Make- Prayag or equivalent as approved by GE complete all as specified & directed. |
| 55 | S&F in repair for 15 mm bore dia of pipe ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (min weight 20mm - 210 gms) comnnection complete all as specified |
| 56 | S&F in repair for 20 mm bore dia of pipe ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (min weight 20mm - 210 gms) comnnection complete all as specified |
| 57 | S&f Grating round 140 mm size of PTMT minimum weight 50 gms |
| 58 | S&F kitchen plate rack in repair of stainless steel of size 720mm x 600mm x 230 mm made out of 1 mm thick steel sheet complete all as specified & directed. |
| 59 | Dismantling floor, hearth or wall tiling incl cement mortar bedding ( but not backing), removing serviceable tiles to store and rubbish off the premises. |
| 60 | M&L for machine pressed precast concrete interlocking/Cobble paver block of any shape and size confirming to IS 15658-2006 of 60mm thickness M-35 grade all as as spd and directed. |
| 61 | M&L laying sand for cushion bed including spreading levelling in layers n.exc 25 cm thick for Paver blocks |
| 62 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in cement mortar 1:6 complete all as specified and directed |
| 63 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10mm thick plaster in cement mortar 1:4 complete all as specified and directed |
| 64 | Demolition of reinforced cement concrete cover slab for MH/Septic tank and removing the debris to a distance not exc 500 M as directed. |
| 65 | M&L precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate for cover slab for MH/Spetic tank set in CM 1:4 including formwork. |
| 66 | M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with lips |
| 67 | Dismantling wrought iron or mild steel work of any description not otherwise provided for . |
| 68 | S & F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe 410-W(Gde-E- 250) (for purlins and hip rafter) |
| 69 | Dismantling plain or corrugated steel sheeting any gauge,thickness including Nainital or similar pattern of roof covering |
| 70 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having Tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 71 | S&F Pre- painted galvatume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 72 | Excavating in hard/dense soil in post holes (Or similar) each n exc 0.50 Cum getting out returning filling in and ramming earth or broken rubble mixed with each around, in layers n exc 25 cm watering and removing surplus soil to a distance exc 50 m and making good surface. |
| 73 | M & L Cement Concrete Type C2 1:3:6 (40mm graded agg) in foundations,filling and mass -concrete in walls or retaining walls,any thikness ,size or shape including pilasters,buttresses column,pillars,boundary pillars and posts (including caps and bases) all as directed by Engineer-in-charge. . |
| 74 | M&L new steel surfaces of any description, over 10cm in width or girth,not otherwise described and applying two coats of anti corrosive paint over a coat of primer |
| 75 | S&F repair vitreous china coloured EWC (Cascade Combination with water closet) including seat cover and necessary fitting complete all as specified and directed |
| 76 | Note :-Tenderers may be noted that amount of credit will be deducted from the total amount arrived, at the time of Acceptance of contract. Please Enable Macros to View BoQ information |
