|
| 1 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engr-in-charge.Note : Removing Rubbish material and throwing it outside the empty area. |
| 2 | M&L for Vitrified ceramic tiles premium quality light shade 8 to 9 mm thick square/ rectangular polished area of each tiles Exc 0.42 Sqm but not exc 1.00 sqm in floors etc. set and pasted with spacer, tile adhesive and epoxy grouted with same make as of tiles water absorption of the tile should be between 3% to 6% including 15 mm thick screed bed CM (1:6) and pointed in white or colour cement to match complete all as specified & directed by Engr-In-Charge. |
| 3 | S&F Premium quality glazed ceramic tile of size 600mm x 300mm thickness 7mm, water absorption between 10% to 20% pasted with spacer, tile adhesive and epoxy grouted with same make as of tile including 15 mm thick rendering CM (1:4) and pointed in white or colour cement to match complete all as specified and directed. |
| 4 | Dismantling of Stone slabs of any description or thickness in floors, platform, apron etc laid bedded and pointed in any mortar including PCC bedding complete all as specified and as directed by Engineer-in-Charge.Note : Removing Rubbish material and throwing it outside the empty area. |
| 5 | M&L for plain cement concrete 1:2:4 type B-1, 40 mm thick using 20 mm graded stone aggregates as in flooring, sub base and base layer etc complete all as specified and directed by Engr-In-Charge. |
| 6 | M&L for Chequered cement concrete tiles glossy finish, chemfered corner, round PU moulded, machine pressed , weather proof 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over including 20 mm thick screed bed of CM (1:6) complete all as specified and directed by Engr-In-Charge. |
| 7 | M&L for Machine cut kota stone slab in flooring18-20mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing incl 20 mm thick screed bed or bedding layer CM 1:4 for laying finishes complete all as specified. |
| 8 | M&L for Kota stone slab 15-18mm thick in riser of steps, skirting, dado and pillar including 15 mm thick rendering 1:4 and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified |
| 9 | M&L for Marble work 18 to 20mm thick of any shade (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade over 1:6 CM, 10 mm screed bed complete all as specified and directed by Engr-in-Charge. |
| 10 | M&L for Granite of any type machine cut 20mm thick, set and jointed in cement slurry over & including screed of 15 mm thick in cement mortar (1:6) and pointed in cement mixed with pigment to match the shade of slab including rubbing, cutting and mirror type polishing & with adhesive complete all as specified & directed by Engr-in-Charge. |
| 11 | Taking down cement plaster from ceilings & brick walls including wall tiles / terrazzo / kota stone etc. any type of any description, racking out joints, hacking for key, scrubbing down with water etc complete all as specified & directed by Engr-in-Charge. |
| 12 | M&L for rendering 15mm thick in cement mortar 1:4 on any face of brick walls or concrete surfaces, finished even and smooth without using extra cement complete including preparation of newly plastered surfaces of walls etc., using WPC and applying two coats of Acrylic exterior emulsion paint over a coat of primer including wall care putty complete all as specified & directed by Engr-in-Charge.Note:- WPC shall be measured and paid separately. |
| 13 | Supply only liquid water proofing compound all as specified. |
| 14 | M&L for rendering 15mm thick in cement mortar (1:6) on any face of Brick walls or concrete surfaces, finished even and smooth without using extra cement including preparation of new plastered surfaces of walls & applying two coat of oil bound distemper over 1 coat of putty complete all as specified & directed by Engr-in-Charge. |
| 15 | M&L for 10 mm thick plaster on ceiling in cement mortar (1:3) finished even and smooth without using extra cement including applying two coats of white wash on ceiling complete all as specified and directed by Engr-in-Charge. |
| 16 | Dismantling Wall and ceiling boards (fibre, pulp, insulation etc) or insulation board/ slabs/ blankets, any thickness ,including cover fillets complete all as specified and directed by Engr-In-Charge |
| 17 | S&F Gypsum board 7 mm thick in ceiling fixed with screws as per manufacturer instructions plain/colour fixed with steel/GI snap grid(powder coated from bottom side) with T and L (26x24x1 mm thick) section of size 600x600 mm placed in ceiling L section fixed with wall with PVC rawl plugs and steel screws @ 600 mm centre to centre and suspended/ provided 14 Gauge(2 mm) galvanised bar not less than @ 1 sqm hanging arrangement and level including adjustable clips, complete all as specified and directed by Engr-In-Charge (and as specified in clause 10.38 of MES Schedule part-I complete) (Note: if any minor electrical fitting and fixtures distributed there in will be match and fix as adjusting) |
| 18 | S&F hollow PVC wall lining interlocking type 7mm thick plain/coloured /wood grain fitted in to the wall with PVC rawl plug and steel screws including fillets on joints as per manufacturers instruction etc complete all as specified and directed by Engineer-in Charge.Note:- If any minor electric fittings and fixtures disturbed there will be match and fixed as existing. |
| 19 | S&F PTMT soap tray any type and fixed to plugs on wall with chromium plated brass screws complete all as specified and directed. |
| 20 | Towel Ring of stainless steel fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specified and directed |
| 21 | S&F in repair 15 mm dia bore fancy type chromium plated long body bib taps cast copper alloy with on/off handle, screwed down, screwed for iron pipe, or for brass ferrule complete all as specified and directed. |
| 22 | S&F in repair 15 mm dia bore fancy type chromium plated bib taps cast copper alloy with on/off handle, screwed down, screwed for iron pipe, or for brass ferrule complete all as specified and directed. |
| 23 | S&F Brass CP Basin mixer 15mm bore for mixing hot & cold water screwed down for iron pipe for Wash Hand Basin complete all as specified and directed. |
| 24 | S&F in repair 15 mm bore chromium plated Angular stop valve of cast copper alloy screwed down high pressure with on/off handle screwed both ends for iron pipe or for unions and fixed all as specified and directed |
| 25 | S&F in repair 15 mm bore chromium plated stop valve of cast copper alloy with long shank and cup (concealed type) ends for iron pipe or for unions and fixed all as specified and directed |
| 26 | S&F in repairs vitreous China squatting pan of Orrissa pattern of approved make of size 580 mm X 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe incl lime concrete bedding and connection to anti-syphonage pipe etc including making good to floor complete all as specified and directed. |
| 27 | S&F in repair vitreous china premium /1st quality wash down water closet wall hung/EWC white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/get gasket etc,(excluding flushing cistern flush pipe ) complete all as specified and directed |
| 28 | S&F in repair one piece/single body PVC blow moulded concealed cistern, pneumatic type: capacity 10 ltrs including chrome finish dual flush control plate, flushing pipe and fixing brackets complete all assembled and fixed at site complete all as specified |
| 29 | S&F in repair vitreous china wash basins, size 550x400mm white flat back including cutting for and pinning in ends of brackets or erecting stand including 32mm waste fittings, waste pipe, chromium plated with long screwed shanks & fly-nuts, flange end bedded in red lead cement and other end fixed complete all as specified |
| 30 | S&F PVC Connections 15mm size with PTMT nuts of length 450mm all as specified |
| 31 | Supplying and laying of CPVC pipes ISI SDR 11 pipe 20mm dia with all fittings solvent and fixed to wall and Ceiling/ Concealed or laid in floor, bore of pipe 20mm including all fitting (Brass/CPVC) as required except item 35,36,37,38 complete all as specified and directed by Engr-in-Charge. |
| 32 | S&F of 15/20 mm inner dia CPVC Brass Male/ Female Brass Threaded Adaptor fittings complete all as specified |
| 33 | S&F of 15/20 mm inner dia CPVC Brass Elbow fittings complete all as specified |
| 34 | S&F of 15/20 mm inner dia CPVC Brass Tee fittings complete all as specified |
| 35 | S&F of 15/20 mm inner dia CPVC Brass Tank Adapter fittings complete all as specified |
| 36 | S&F 20mm Gun-metal, globe or gate valves/UPVC valve with , screwed both ends for pipe and fixed complete all as specified |
| 37 | S&F 15mm fancy type chromium plated pillar taps, cast copper alloy, with capstan heads, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified |
| 38 | S&F 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls including fixing clamps with nut and bolts including taking down existing pipe complete all as specified and directed by Engineer-in-Charge. |
| 39 | S&F 110mm bore PVC (SWR) bends with or without shoe / with or without access door any radius fixed to walls including distance pieces and fixed with shaddle complete all as specified and directed by Engineer-in-Charge. |
| 40 | S&F 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to floor including fixing clamps with nut and bolts including taking down existing pipe complete all as specified and directed by Engineer-in-Charge. |
| 41 | S&F 75mm bore PVC (SWR) bends with or without shoe / with or without access door any radius fixed to walls including distance pieces and fixed with shaddle complete all as specified and directed by Engineer-in-Charge. |
| 42 | M&L for PVC (SWR) Floor trap long neck 75 mm dia, with stainless steel grating including jointing to waste pipe fixed in cement concrete (1:2:4) type B-1 etc fixed in repairs complete all as specified and directed by Engineer-in-Charge. |
| 43 | S&F 75mm PVC (SWR) vent cowls Complete all as specified and directed. |
| 44 | S&F in repair PVC low level cistern of 10 ltrs capacity with top push button inclusive of brackets and PVC bend long type and connecting to flush pipe of any size and pattern with inlet ball valve float and handle complete of approved make complete all as specified and directed. |
| 45 | S&F in repair brass chromium plated shower rose 125 mm of size with arm and with or without swivel joints to steel pipe or union complete all as specified and directed |
| 46 | S&F 600mm x 450mm bevelled edge mirror of selected quality glass mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified. |
| 47 | S&F in repair brass chromium plated tubular towel rail, 20 mm dia, D type, 60 cm long between flanges complete all as specified and directed. Please Enable Macros to View BoQ information |
