|
| 1 | M&L for brickwork with fly ash bricks, modular bricks straight or curved on plan exc 6m mean radius, built in, built in CM (1:6) including demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches , pillars etc complete all as specified and directed. |
| 2 | M&L for rendering 15mm thick in CM (1:6) on brick work or concrete surface and finishing the surface even and smooth without using extra cement including taking down cement or cement lime plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 3 | M&L for preparation of new plastered surfaces of wall and applying two coats of oil bound distamper complete all as specified and directed. |
| 4 | M&L for rendering 15 mm thick cement plaster in CM (1:4) on fair faces of brick work or concrete surface and finishing the surface even and smooth without using extra cement including taking down cement or cement lime plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed. |
| 5 | M&L for preparation newly plastered surface of wall and applying two coats of cement base paint complete all as specified and directed. |
| 6 | Taking down chowkhat with shutter (without taking off shutter from the frame) area n.exc 1.5 sqm each complete all as specified and directed. |
| 7 | Taking down chowkhat with shutter (without taking off shutter from the frame) area exc 1.5 sqm but n.exc 4 sqm each complete all as specified and directed. |
| 8 | Taking down shutters of any description exc 1.0 sqm but n. exc 2.0 sqm each complete all as specified and directed. |
| 9 | Taking down shutters of any description n. exc 1.0 sqm each complete all as specified and directed. |
| 10 | Taking down and refixing only shutter of any description exc 1 but n. exc 2 sqm in the same opening complete all as specified and directed. |
| 11 | S & F in repair Factory made steel windows double shutter with tubular frame of size 40x79mmm having thickness of steel sheet not less than 1.5mm with 'Z' section side hung glazed shutter fixed (with sash bar) on external side and with wire gauge shutter (without sash bar) on internal side and including steel handle 100mm long of MS flat 20x5mm made to shape 02 nos of MS tower bolts 100 mm on each shutter and fixing hooks & eye of standard quality complete all as specified and directed. |
| 12 | S & F for framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 13 | S&F for Solid PVC double door frame of size 50mm x 95mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 14 | S&F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 15 | S&F for pressed steel frames size 105 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed. |
| 16 | S&F for pressed steel frames size 125 x 60mm for doors with one or more rebates including necessary fixing lugs, lock strike plate etc complete all as specified and directed. |
| 17 | M&L for plain cement concrete type C-1 (1:3:6) using 20mm graded stone aggregate for embedding of hold fasts and filling of pressed steel frames etc complete all as specified and directed. |
| 18 | S&F for 2nd class hard wood (sal) plain, solid, straight chawkhats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 19 | S&F for 30mm thick factory made flush shutter solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 20 | S&F for 35mm thick 2nd class hard wood (sal) glazed & skelton shutters ,open rebated, prepared to receive glass, gauze etc,without shash bar edge of framing plain, chamfered or rounded, fitted with cut or mitred beads for securing glass, gauge etc sizes of members of shutters as specifed in SSR Part-I section 8 clause 8.24(a) supplied and fitted to chawkhats complete all as specified and directed. |
| 21 | M & L for 30mm thick 2nd class hard wood glazed shutter divided into square with plain,chamfered or rounded mitered and rebated sash bar any numbers, fitted with cut and mitred beads for securing glass etc and fitted to chowkat complete all as specified and directed. |
| 22 | M & L for 30mm thick 2nd class hard wood wire gauged shutter open rebated prepared to recive glass,gauze etc with out sash bars chamfered or rounded fitted with cut and mitred beads for security glass etc size of members of shutters as specified and fitted to chowkhat complete all as specified and directed. |
| 23 | S & F for aluminium butt hinges medium weight 100mm type C-21 complete all as specified and directed. |
| 24 | S & F mild steel Butt hinges of medium weight and fixed 100mm complete all as specified and directed. |
| 25 | S & F in repair mild steel Butt hinges of medium weight and fixed 100mm complete all as specified and directed. |
| 26 | S & F 150 mm long Aluminium alloy D type handles, cast type, anodised complete all as specified and directed. |
| 27 | S & F in repair 150 mm long Aluminium alloy D type handles, cast type, anodised complete all as specified and directed. |
| 28 | S & F 200mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed. |
| 29 | S & F in repair 200mm long aluminium anodized barrel tower bolts of extruded section complete all as specified and directed. |
| 30 | S & F for aluminum anodised sliding door bolt 250mm fixing with bolt and sliding bolt of extuded section complete all as specified and directed. |
| 31 | S & F in repair aluminum anodised sliding door bolt 250mm fixing with bolt and sliding bolt of extuded section complete all as specified and directed. |
| 32 | S & F for 300mm mild steel ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed. |
| 33 | S & F in repair 300mm mild steel ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed. |
| 34 | S & F for mild steel Butt hinges of medium weight and fixed 75mm complete all as specified and directed. |
| 35 | S & F for aluminium anodised barrel tower bolt 100mm extruded section complete all as specified and directed. |
| 36 | S & F for 125 mm long Aluminium alloy D type handles, cast type, anodised complete all as specified and directed. |
| 37 | S & F for sheet glass of 3mm thick ordinary quality glass and glazing with oil putty in square n exc 0.5 sqm in each pane complete all as specified and directed.. |
| 38 | Hacking out old broken glass (any thickness size quality and discription) for wooden frame fixed with wooden beads or from metal frame including punching or drilling out old glazing pins/spring clips and providing and fixing new ones complete all as specified and directed. |
| 39 | S & F for stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and direceted. |
| 40 | S & F in repair of Stainless Steel wire cloth of 0.36mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and direceted. |
| 41 | M&L for preparation of new or previously untreated surface of wood or wood based materials of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 42 | M&L for preparation of new or previously untreated surface of steel surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 43 | S & F in repair of powder coated (thickness of powder coating shall not be less than 50 micron) aluminium frame for doors, windows, ventilators with one or more rebates including joining cleats for fixing etc complete all as specified and directed. |
| 44 | S & F in repair anodised aluminium glazed side hung door shutter with frame using section 100 x 44mm x 1.5 mm thick with standard door section having style, top rail, lock rail as 83 x 44 x 1.5mm where as bottom rail will be made up of 100 x 44 x 1.5mm including 5mm thick plain sheet glass ordinary quality including all necessary suitable handle, hinges, screw, jointing cleats, rubber packing, Aluminium snap beading and one No 200mm long Aluminium tower bolt, 100 mm long 3 Nos Aluminium hinges B-21 type and 1 No. Mortice lock 100mm size 4 lever (vertical type) and hydraulic door closer for each shutter complete all as specified and directed. |
| 45 | S & F in repair powder coated(thickness of powder coating shall not be less than 50 micron) aluminium three track sliding type glazed window shutter with 5mm thick plain sheet glass fixed open track section 100x38x1.25mm having three track (two of glass & one of stainless steel wire cloth of 0.36mm nominal dia of wire and average width of aparture 1.40mm) with members of window shutters of section 38x12x1.5mm and other standard Bombay sliding section including all necessary fiber wheel rollers suitable handle to facilitate sliding and all necessary jointing cleats glazing clips,rubber packing, Aluminium snap beeding etc complete all as specified and directed. |
| 46 | S & F in repair for aluminium section of size 38x65x1.3mm thick partition wall fixed to wall on aluminium frame work fixed panel with 5mm thick plain glass and fixed with glazing clips rubber beading including suitable section complete all as specified and directed |
| 47 | S & F in repair Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as specified and directed. |
| 48 | S&F for stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement incl dismantling of existing railing etc complete all as specified and directed. |
| 49 | S & F for 4 mm thick sheet glass,ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed. |
| 50 | S & F in repairs 18/19 mm thick plywood interior grade both side with comercial face fixed with screwed to timber frame work edge chamfered complete all as specified and directed. |
| 51 | S & F for 0.9 mm thick Decorative laminate (Mica) type1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructionas complete all as specified and directed. |
| 52 | S&F for 100mm size Decorative type, handles of stainless steel ISI marked complete all as specified and directed. |
| 53 | S&F for 100mm size hasp and staple aluminium anodised including bolt to hinge plate and fixed with screws complete all as specified and directed. |
| 54 | S&F for 30 mm width of flaps continuous piano hinges MS bright finish are electroglavanised complete all as specified and directed. |
| 55 | S&F in repair PVC kitchen cabinet & CBs, wardrobe etc with suitable frame including shelves in required sizes at site made out 18mm thickness one side decorative lamination and other side balancing lamination sheet & provision of shutters made out 18 mm thick with decorative laminated PVC sheet all,with required brackets stainless steel screw etc.the panel shall be fabricated using adhesive and screws where ever required.all the edges should be covered with 2 mm thick edge bonding tape or 90 degree edge bend finish including all necessary fittings as per site requirement and as per manufacturer instruction complete all as specified and directed.Note- Density of PVC solid sheet should not be less than 575 kg/M Cum |
| 56 | S & F in repair 18mm thick factory made 100% solid WPC flush shutter (for cupboard, wardrobe ,etc) made from co-extruded three layer rigid foam sheet Single extruded) with 0.8 to 1mm thick outer layer having density not less than 1400kg/cum and density of center core not less than 600kg/cum, with prelamination on both front and back side manufactured by and ISO 9001/2015 certified company complete all as specified and directed. |
| 57 | S & F for rubber beading size 65x5mm for doors complete all as specified and directed. |
| 58 | S & F for aluminium floor door stopper two legged and tongue with hard drawn steel spring fixed to floor 150mm complete all as specified and directed. |
| 59 | S & F in repairs Aluminium floor door stopper two legged and tongue with hard drawn steel spring fixed to floor 150mm complete all as specified and directed. |
| 60 | S & F in repair 600x450mm bevelled edge mirror of fancy type selected quality including making 4x Nos holes and fixing with Stainless steel spacer /SS cup washers complete all as specified and directed . |
| 61 | S & F in repair sheet Glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed |
| 62 | S & F in repair sliding chanel of drawer 450 to 600 mm long, mild steel, chromium plated, heavy duty,s uperior quality and fixed complete all as specified and directed |
| 63 | Taking down anodised aluminium door shutters, side hung or fixed type exc 1.5 sqm and n. exc 4 sqm and refixing in same opening after repairing including necessary jointing cleats, glazing clips, rubber packing, screws etc and with existing anodised aluminium snap beading, screws anodised aluminium fittings such as hinges type B-21, 125mm long anodised section complete including floor door spring hydaulically regulated complete all as specified and directed. |
| 64 | S & F in repair Aluminium (Die cast) body Door closer hydraulically regulated designation No 3 universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed |
| 65 | S & F in repairs double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover,governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed. |
| 66 | S & F in repair mortice lock 4 levers aluminium, vertical type, size 100mm complete all as specified and directed. |
| 67 | S & F in repair medium grade stainless steel 25mm dia curtain rods including brackets & fancy type end knobs complete all as specified and directed. |
| 68 | S & F in repair fancy type PVC coated decorative curtain rod of 25mm dia of approved shade including MS bracket/wall to wall including latto on each end complete all as specified and directed. |
| 69 | M&L for running welding in repairs thickness of metal to be welded not exceeding 6mm thick but not exc 9mm thick complete all as specified and directed. |
| 70 | M&L for spot welding in repairs n. exc 2.5cm in length thickness of metal to be welded not exceeding 6mm thick complete all as specified and directed. |
| 71 | S & F in repair plain fillets square, rectangular or triangular in section exc 3 Sqcm n exc 6 Sqcm, wrought finished, secured with nails or brads as in beads complete all as specified and directed. |
| 72 | S & F in repair 50mm dia, polished, hard wood knobs fixed with screws complete all as specified and directed |
| 73 | M & L for 18-20mm thick granite stone slab, machine cut and polished in both side as in shelves and partition in cupboards, bedded and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust with admixture of pigment to match the shades of granite stone, including rubbing, grinding, polishing including making sandwitch moulding to edges including dismantling of old stone slabs/tiles complete all as specified and directed. |
| 74 | M & L for non skid ceramic tiles (coloured) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm as in floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in cement & sand mortar 1:6 & including dismantling of floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 75 | M & L for glazed ceramic tiles (coloured) 350x250x7mm/450 x 350 x 7mm thick on vertical surfaces such as dado, skirting etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 10 mm thick rendering (as screed bed) in cement & sand mortar 1:4 & including dismantling of floor, hearth or wall tiling including cement mortar bedding but not backing, removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 76 | S & F in repair rolled sections as in main and cross beams, hip and jack rafters purlins where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates Fe 410-W(Gde- E- 250) quality-A incl dismantling of existing wrought iron and mild steel work of any description complete all as specified and directed. |
| 77 | S & F in repair for 0.50 mm thick pre-painted galvalume aluminium zinc alloy coated steel (550 Mpa) corrugated sheet of any colour, double ribbed trapezoidal profile in desired length etc, as in roof covering/cladding to wall, with joints overlapped and fastened with fasteners using hot dipped zinc coated self drilling hexagonal washer head fasteners with fittings complete all as specified and directed. |
| 78 | S & F for hangers 6 mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I.flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed. |
| 79 | S&F for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to entre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre incl dismantling of existing framework complete all as specified and directed. |
| 80 | S&F for 12 mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre,including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish (Frame work for ceiling shall be measured and paid separately) incl dismantling of existing ceiling complete all as specified and directed. |
| 81 | S & F for suspended ceiling system of grid/section of size 600x600mm comprising of interlocking GI powder coated main T-runners of size 24x38x0.33mm thick of length 3000mm, cross-T of size 24X32X0.33mm thick of length 1200mm and secondary intermediate cross-T of size 24X32X0.33mm thick of length 600mm and perimeter wall angle of size 24x24x0.40mm thick of length 3000mm to be fixed on periphery wall/partition with the help of plastic rawl plugs @ 450mm center to center and 40mm long dry wall S.S. screws with and including 4 mm thick E-board false ceiling tiles of size 595x595mm of approved texture, design and pattern to be placed in the grid system duly suspended with 6 mm dia GI wire hangers fixed with steel dash fasteners or from purlin of the roof with clip complete incl dismantling of existing ceiling complete all as specified and directed. |
| 82 | S & F for Solid PVC Wall Lining consisting of 5mm thick single side prelam PVC sheet used instead of plain colour sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing incl dismantling of existing wall sheets complete all as specified and directed. |
| 83 | S & F for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed. |
| 84 | Providing and fixing for factory made uPVC white colour Sliding window Three track area not exc. 2.0sqm made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories. Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose. |
| 85 | S & F in repair stainless steel kitchen plate rack made out of 0.63mm thick stainless steel sheet of size 750x600 mm including screws and weight not less than 5.00 Kg complete all as specified and directed. |
| 86 | M & L for 15mm thick rendering in CM (1:6) on other than fair faces of brick work in walls and finishing the surfaces even and fair complete all as specified and directed. Please Enable Macros to View BoQ information |
