|
| 1 | Demolition of un-reinforced cement concrete in any position, complete all as specified and directed. |
| 2 | M&L for Cement concrete (1:3:6) type C-2 using 40 mm graded stone aggregate as in plinth protection, 75mm thick, surfaces finished even and fair without using extra cement as in plinth protection including provision of construction joints, complete all as specified and directed. |
| 3 | M&L for Cement concrete (1:4:8) type D-1 using 20 mm graded stone aggregate as in sub base, 75 mm thick, surfaces finished even and fair without using extra cement, complete all as specified and directed. |
| 4 | M&L for 40 mm thick cement concrete (1:2:4) type B-1 using (20 mm graded crushed stone aggregate) as in roof, sub base of flooring,surface finished rough to receive floor topping, complete all as specified and directed. |
| 5 | Dismantling of brick work built in cement mortar of any specification and in any position, complete all as specified and directed. |
| 6 | M&L brick work with sub class 'B' bricks, straight or curved on plan exceeding 6m mean radius built in CM (1:6), complete all as specified and directed |
| 7 | All as per item 06 above here-in-before but using old bricks retrieved from dismantling including cleaning and removal of mortar from old bricks etc, complete all as specified and directed |
| 8 | M&L for rendering 15 mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, finished fair and smooth without using extra cement omplete all as specified.including Preparation of new surfaces of wall and applying two coats of white lime wash (white washing) on walls including corneces, pillars etc complete all as specified and directed |
| 9 | Taking down cement plaster on brick walls of any description including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed |
| 10 | M&L for rendering 15 mm thick in cement mortar (1:4) on any face of brick walls or concrete surfaces, finished fair and even including WPC,preparation of new plastered or unplastered surfaces and applying two coats of cement based paint over a coat of chalk white primer on walls complete all as specified and directed. (WPC measured and paid separately) |
| 11 | M&L for Preparing old surfaces plastered or unplastered of walls, cornices, pillars etc including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coats of cement based paint complete all as specified and directed. |
| 12 | Supply only integral water proofing compound, complete all as specified and directed. |
| 13 | M&L for rendering 15 mm thick in cement mortar (1:6) on any face of brick walls or concrete surfaces, finished fair and smooth without using extra cement complete all as specified including Preparation of new surfaces of wall and applying two coats of oil bound distemper on walls including corneces, pillars etc complete all as specified & directed. |
| 14 | M&L for Preparation of old decorated surface of wall and applying one coat of oil emulsion distemper, complete all as specified and directed. |
| 15 | M&L for rendering 5 mm thick on ceiling surfaces in cement mortar (1:3) finished even & smooth without using extra cement including preparation of new plastered or unplastered surfaces and applying two coats of white wash on ceilings complete all as specified and directed. |
| 16 | M&L for Preparing old surfaces plastered or unplastered of ceiling, cornices, pillars etc including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of lime wash (white washing) complete all as specified and directed. |
| 17 | Resecuring or eashing & adjusting, without taking down of shutters of any description of exc. 1 Sqm but n.exc. 2 Sqm each complete all as specified & directed. |
| 18 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) of size not exceeding 1.50 Square metre each including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts, complete all as specified and directed. |
| 19 | All as per item No. 18 above herein before but size exceeding 1.5 Square metre and not exceeding 4 Square metre each, complete all as specified and directed. |
| 20 | Taking down chowkhats or frames exc 1.50 Sqm but n .exc 4 Sqm each, removing to or from store, including cutting holes in brick walls of appropriate size for insertion of cement concrete blocks for hold fasts,or otherwise, complete all as specified and directed. |
| 21 | Taking down & refixing shutters of any description in same opening exc 1.00 Sqm but n.exc 2.00 Sqm each, complete all as specified and directed |
| 22 | S&F for Pressed Steel Frames for doors 1.25 mm thick MS sheet of profile (105X60)mm for doors and windows frames with one or more rebates including necessary fixing lugs, hinges, lock, strike plates, shock absorber 20mm dia, 60mm MS conduit for housing of a drop bolt etc. treating of internal surfaces of chowkhats with coal tar or black paint complete all as specified and directed |
| 23 | All as per 22 item above here-in-before but size 125x60mm with double rebate, complete all as specified and directed. |
| 24 | M&L for PCC (1:3:6) type C-1 using 20 mm graded stone agg .as in filling steel frames etc including necessary form work, complete all as specified and directed |
| 25 | Material and labour for PCC (1:2:4) type B1 with using 20 mm graded stone agg as in bed block hold fast block, complete all as specified and directed |
| 26 | Taking down shutter of any description of exceeding 1 sqm but not exc 2 Sqm complete all as specified and as directed |
| 27 | S&F 35mm thick, Flush shutters, solid core construction, with block board core, commercial type with one face is covered with deco rative face veneer with lipping/frame to match, complete all as specified and directed. |
| 28 | M&L for 35mm thick, 2nd class hard wood (Hollock), plain framed, panelled shutters, any number of panels, panels shall be of 12mm thick BWR glade veneered particle board medium density, wood particle board with commercial face veneers, size of members as specified in clause 8.20(a) of MES Schedule Part-I section-8, complete all as specified and directed. |
| 29 | M&L for 35 mm thick, 2nd class hard wood (Hollock), glazed and skeleton shutters open rebated and prepared to receive glass/ gauge etc (without sash bars), edges of framing plain chamfered or rounded, fitted with cut and mitered beads for securing glass etc for doors, size of members as specified in clause 8.24 (a) of MES Schedule Part-I Section-8, complete all as specified and directed. |
| 30 | S&F 150 mm Mild steel helical door spring including roller and roller plate, complete all as specified and directed. |
| 31 | S&F Aluminium tower bolt of extruded section, 150mm length of bolt and fixed with screws, complete all as specified and directed. |
| 32 | S&F 125mm size, aluminium (cast type) anodized, handle and fixed with screws, complete all as specified and directed. |
| 33 | S&F 250mm long aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded sections or cast aluminium alloy and fixed with screws, complete all as specified and directed. |
| 34 | S&F 140 mm Floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring complete all as specified and as directed. |
| 35 | S&F in Repair 150 mm, ordinary rat tail rod patttern springs includding roller and roller plate complete all as specified and directed |
| 36 | S&F in repair 140 mm Floor door stopper of aluminium alloy body and tongue, anodized with hard drawn steel spring complete all as specified and as directed. |
| 37 | S&F in repair 200 mm mild steel barrel tower bolt, stove enamelled black, with bright bolt complete all as specified and directed |
| 38 | S&F in repair 150 mm mild steel pressed handles, oval type stove enamelled black complete all as specified and directed |
| 39 | S&F in repair for 250 mm Mild Steel sliding door bolts plate type, stove enamelled black, with bright bolt not less than 12 mm dia with and including a minimum 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed |
| 40 | S&F in repair Mild steel butt hinge, 100 mm long, medium weight, cold rolled fixed with steel screws or welded to steel frame where required, complete all as specified and directed. |
| 41 | S&F Factory made Solid PVC door frame of size 50 mm x 47 mm made of 5 mm plain colour PVC sheet reinforced with mild steel square tube complete all as specified in clause 8B.3.1 and shown on page 150 of MES Schedule Part-II (2010), complete all as specified and directed. |
| 42 | S&F for Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails, MS frame covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supply and fixing in the frame at site as per clause 8 B.2.1 of MES schedule Part-II (2004), complete all as specified and directed. |
| 43 | S&F for PTMT tower bolts, 200 mm long and fixed with steel screws, complete all as specified and directed. |
| 44 | S&F for PTMT handle 125mm long fixed with steel screws, complete all as specified and directed. |
| 45 | S&F for PTMT butt hinge, 100mm long, fixed with steel screws with brass/bronze hinge pin, complete all as specified and directed. |
| 46 | S&F factory made double rebate box type side hung steel window with glazed and mesh shutters with pintal hinges & 2 Nos 150 mm mild steel tower bolts to each shutter, steel handle with & without glazing bars, one side two shutters with glazing bars & other side glazed shutter with glazing bars including 10mm mild steel guard bars dovetailed or welded and with framed with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-06/07 & CEJZ/TD-07/07. Note : Wiremesh & glass will be measured separtely. |
| 47 | S&F Factory made box type steel ventilator with glazing bars dovetailed or welded and with one shop coat of zinc chromate primer complete all as specified and shown on Drawing No CEJZ/TD-1019/08 sheet 1/3 to 3/3.Note : Wiremesh, guard bar & glass will be measured separtely. |
| 48 | S&F Mild steel framed work of as in grills/guard bars shouldered with steel window/ ventilator frames, complete all as specified and directed. |
| 49 | M&L for Preparation of new steel surfaces of any description, over 10cm width or girth and applying two coats of synthetic enamel paint over steel surfaces, complete all as specified and directed. |
| 50 | M&L for Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed |
| 51 | Hacking out old broken glass (any thickness, size, quality or description) from wooden/ steel frames, glazed with putty or fixed with beads complete all as specified and directed |
| 52 | S&F 3mm thick, plain sheet glass ordinary quality and glazing, with oil putty or with wooden beads (supplied alongwith shutters), in squares n.exc 0.50 Sqm, complete all as specified and directed. |
| 53 | S&F Figured glass 4 mm thick pin head type and glazing with oil putty in squares n exc 0.5 sq. m in each pane, complete all as specified and directed. |
| 54 | S & F Plain sheet glass 4.8 mm thick, ordinary quality and glazing, fixed in aluminiuam window, in squares n exc 0.50 Sqm, complete all as specified and directed. |
| 55 | S&Fstainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture not more than 1.18 mm and fixed with stainless steel wire staples complete all as specified and directed |
| 56 | S&F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture not more than 1.18 mm and fixed with stainless steel wire staples complete all as specified and directed |
| 57 | Welding in repairs n. exc 2.5cm in length and thickness of welding metal exc 9 mm but not exc 20 mm, complete all as specified and directed. |
| 58 | Taking up or down existing steel water tubing, 15mm bore alongwith connections fixed/laid in any situation, complete all as specified and directed. |
| 59 | Taking up or down existing steel water tubing, 20mm bore alongwith connections fixed/laid in any situation, complete all as specified and directed. |
| 60 | S&F Galvanised iron steel water tubing, 15mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors, complete all as specified and directed. |
| 61 | S&F Galvanised iron steel water tubing, 20mm bore, medium grade with all fittings and fixed to walls and ceilings or laid in floors, complete all as specified and directed. |
| 62 | Fixing only, after cleaning old steel water tubing, 15mm bore and connections in new or old position using new fittings, complete all as specified and directed. |
| 63 | Fixing only, after cleaning old steel water tubing, 20mm bore and connections in new or old position using new fittings, complete all as specified and directed. |
| 64 | S&F in repair Wash hand basin, flat back 550x400 mm vitreous china (white) including PTMT waste fittings, 32mm bore size, PVC, 32mm bore,pvc connection, pvc angle cock, angle iron/cast iron brackets of required size as directed & making good disturbed surfaces to match with the existing, complete all as specified and directed. |
| 65 | S&F in repair 600x450 mm beveled edge looking mirror of selected quality glass and backing with 6mm thick AC building board and fixed to wall with PVC rawl plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 66 | S&F in repair Vitreous china white squatting pan orrissa pattern of size 580mm x 440 mm with integral foot rests including necessary lime concrete and 100 mm bore cast iron ‘P’ or 'S' trap with 550 to 600 mm long neck for connecting WC to branch piece with cement joints, fixed, complete all as specified and directed. |
| 67 | S&F in repair Viterous China wash down water closet pan (pedestal pattern), white incl. Seat and cover & CP jet (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and directed |
| 68 | S&F in repair grating doom 125 mm dia with waste hole of PTMT. (Minimum weight 40 gms) complete all as specified and directed |
| 69 | S&F in repairs 15mm dia brass spindle half turn for 15 mm CP brass fancy Bib/Pillar tap/ angle cock/Stop Cock etc as fixed and all as specified and directed |
| 70 | S&F in repairs 15 mm bib tap standard of PTMT any colour high pressure screwed for iron pipe (Min wt 90 Gms). complete all as specified and directed |
| 71 | S&F in repairs 15 mm angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed, (Min wt. 90 gms) complete all as specified and directed |
| 72 | S&F in repair waste coupling of PTMT (half or full threaded) 32mm bore of discharge pipe minimum weight 45 gms, complete all as specified and directed. |
| 73 | S&F in repair 32 mm Bore dia Bottle trap of PTMT having minimum water seal of 25mm .(Minimum weight 32mm-260gms/40mm-270 gms), complete all as specified and directed. |
| 74 | S&F in repair PVC low level flushing cistern (white) of 10 liters capacity with inlet ball float valve, PVC flush pipe and necessary fixing arrangements and connecting to water pipe and WC etc, complete all as specified and directed |
| 75 | S&F in repair sinks made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm as specified and directed by Engineer-in-Charge |
| 76 | S&F in repair 1mm thick stainless steel sink with drainage board, plugs, washers, PVC waste pipe, union, CP coupling & fixed in RCC cooking platform, overall size of sink 915mm x 460mm, bowl size 410mm x 330mm x 160mm, complete all as specified and directed |
| 77 | S&F in repair PVC waste pipe, 32mm bore suitable to waste coupling pipe attach with rubber ring joints fixed to waste coupling of sinks/WHBs complete all as specified and directed. |
| 78 | Taking down eaves gutters and rainwater pipes(any size or pattern), including all fittings, heads, shoes, bends, swan-necks etc complete all as specified and directed. |
| 79 | S&F 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, complete all as specified and directed. (fitting measured separately). |
| 80 | S&F in repairs 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent including jointing to waste pipe in run lead, complete all as specified and directed. |
| 81 | S&F in repair 75 mm PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified and directed |
| 82 | S&F 75 mm bore PVC (SWR) bends any radius with access door fixed to walls including distance pieces and stack clamps, complete all as specified and directed. |
| 83 | S&F in repair 110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to walls including distance pieces and stack clamps as in rain water pipes, complete all as specified and directed. |
| 84 | S&F 110 mm bore PVC (SWR) bends/shoe any radius with access door fixed to walls including distance pieces and stack clamps, complete all as specified and directed. |
| 85 | S&F in repair 110 mm PVC (SWR) junction single, (Single T) equal or unequal, complete all as specified and directed. |
| 86 | Demolition of Stone slabs and tiles laid bedded pointed in mortar of any description or thickness in floors, aprons etc, complete all as specified and directed. |
| 87 | M&L for Granite(of any type) tiles18- 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including 15 mm thick plaster as in back coat CM 1:4 complete including making circular gas pipe hole, moulding at corners and polishing type all as specified and directed |
| 88 | S&F in repair PVC cover for tanks of capacity 500 to 1000 ltrs including taking out old broken covers with GI nuts and bolts 3/16\\" dia and 1\\" long bolts with washers (8 Nos with each cover and 2 Nos hing bolts and nuts 8 mm dia 50mm long complete all as specified and directed. |
| 89 | Dismantling of boarding as in shelves/cupboard shutter, complete all as specified and directed. |
| 90 | M&L for 18-19mm thick pre-laminated particle board, flat pressed single layer type or three layer type with BWR type adhesive, medium density interior grade having one side decorative lamination and other side balancing white lamination as in cup board shutter/shelves including 6 mm thick teak wood leaping on three sides and 20mm thich on hanging side & French polishing to edging, complete all as specified and directed. |
| 91 | Continous (piano) hinges of mild steel bright finish or electro galvanised with flap (when open) 30mm,fixed with steel screw, complete all as specified and directed. |
| 92 | S&F Hasp and staple of aluminium anodized, safety type, 100mm long, fixed with screws, complete all as specified and directed. |
| 93 | Material & labour for Glazed ceramic coloured tiles in vertical surfaces 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over including 10 mm thick rendering in cement mortar (1:4) on fair faces of brick work or concrete surfaces incl dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing seviceable tiles to store and rubbish off the premises complete all as specified and directedNote - Colour of tiles and fixing pattern of the same will be approved by the GE/ Engineer-in-charge |
| 94 | Material & labour for Glazed ceramic coloured tiles in vertical surfaces 300X 200X 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over including 10 mm thick rendering in cement mortar (1:4) on fair faces of brick work or concrete surfaces incl dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing seviceable tiles to store and rubbish off the premises complete all as specified and directedNote - Colour of tiles and fixing pattern of the same will be approved by the GE/ Engineer-in-charge |
| 95 | Material & labour for Non skid ceramic coloured tiles7 to 8 mm thick (square) area of each tiles exceeding 0.11 Sqm but nexc 0.18 sqm,in floor etc set and jointed in neet cement slurry and pointed in white or coloured cement to match over including 15 mm thick screed bed in cement mortar (1:6) including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing seviceable tiles to store and rubbish off the premises complete all as specified and directedNote - Colour of tiles and fixing pattern of the same will be approved by the GE/ Engineer-in-charge |
| 96 | All as per Item No-95 here-in-before but as on vertical surfaces such as skirting/dado over and including 10 mm thick rendering in cement mortar (1:4), including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing seviceable tiles to store and rubbish off the premises complete all as specified and directed |
| 97 | M&L for 50 mm thick Cement concrete type D-2, 1:4:8 in foundations, filling and mass concrete including demolition cement concrete (un-reinforced) in ground floors and pavings n exc 15cm thickness (below or above ground level), complete all as specified and directed. |
| 98 | M&L Chequered cement concrete coloured tiles 30 cm x 30 cm x 25 mm thick using grey cement and no pigment set over & including 15 mm thick screed bed or bedding layer in cement mortar (1:6) with neat cement and pointed in grey cement mixed with pigment to match the shade of tiles, complete all as specified and directed. |
| 99 | Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes for exc 250 and n. exc 500 ltr capacity of water tanks and incl to mension date of cleaning in suitable paint, etc, complete all as specified and directed. |
| 100 | S&F in repairs decorative mild steel coloured curtain rod of 20 mm dia PVC coated approved pattern & design including side cups, powder coated mild steel flat iron brackets fixed with steel screws & PVC rawl plugs, complete all as specified and as directed Please Enable Macros to View BoQ information |
