|
| 1 | CHAIR DINING : FD-279, 228Taking down carefully unserviceable parts of various items of furniture listed here-in-under and supply and fixing new parts made out of second class hard wood as per existing shape and size complete all as specified and as shown on drawing and as directed by Engr-in-Charge. Including two coats of french polish complete all as directed. Taking down carefully unserviceable rail and S&F rail made of 2nd class hard wood with suitable holes for caning as per drg. |
| 2 | Taking down carefully unserviceable front legs and S&F front legs made of 2nd class hard wood as per drg. |
| 3 | Taking down carefully unserviceable rear legs and S&F rear legs made of 2nd class hard wood as per drg. |
| 4 | Taking down carefully unserviceable stiffeners and S&F stiffners made of 2nd class hard wood as per drg. |
| 5 | Taking down carefully unserviceable back rest and S&F back rest made of 2nd class hard wood as per drg. |
| 6 | Taking down carefully unserviceable corner and S&F new corner made out of 2nd class hard wood complete all as shown on drg. |
| 7 | M&L for recaning the chair dining same with new 2mm wide oval type white plastic cane and bordering with 4mm wide white plastic cane complete along with fixing 04 Nos PVC toes in each chair after removing old pvc toes as directed by Engr in Charge. |
| 8 | Removing old stains and polish from old chair dining by using electric motor grinder and emery paper and preparing wooden surface by applying burnt seina /colour and wooden putty. after preparation applying Three coats of polish made up of Spirit and danlakh to get uniform finish shade as directed by GE. |
| 9 | CHAIR WRITING: FD-250, 280Taking down carefully unserviceable rail of seat / back and S&F rail made of made of 2nd class hard wood with suitable holes for caning as per drg. |
| 10 | Taking down carefully unserviceable front legs and S&F front legs made of 2nd class hard wood as per drg. |
| 11 | Taking down carefully unserviceable rear legs and S&F rear legs made of 2nd class hard wood as per drg. |
| 12 | Taking down carefully unserviceable stiffeners and S&F stiffners made of 2nd class hard wood as per drg. |
| 13 | Taking down carefully unservicable arm rest and S&F arm rest made of 2nd class hard wood as per drg. |
| 14 | Taking down carefully unservicable back rest and S&F back rest made of 2nd class hard wood as per drg. |
| 15 | Taking down carefully unserviceable corner and S&F new corner made out of 2nd class hard wood complete all as shown on drg. |
| 16 | M&L for recaning the chair writing same with new 2mm wide oval type white plastic cane and bordering with 4mm wide white plastic cane complete along with fixing 04 Nos PVC toes in each chair after removing old pvc toes as directed by Engr in Charge. |
| 17 | Removing old stains and polish from old chair writing by using electric motor grinder and emery paper and preparing wooden surface by applying burnt seina /colour and wooden putty. after preparation applying Three coats of polish made up of Spirit and danlakh to get uniform finish shade as directed by GE. |
| 18 | CHAIR EASY: FD-229Taking down carefully unserviceable rail and S&F rail made of 2nd class hard wood with suitable holes for caning as per drg. |
| 19 | Taking down carefully unserviceable front legs and S&F front legs made of 2nd class hard wood as per drg. |
| 20 | Taking down carefully unserviceable rear legs and S&F rear legs made of 2nd class hard wood as per drg. |
| 21 | Taking down carefully unservicable seat frame and S&F new seat frame of 2nd class hard wood of section 70 mm x 40 mm of size 510 mm long in front and 480mm long in rear as per drg. |
| 22 | Taking down carefully unservicable back frame and S&F new back frame of 2nd class hard wood of section 70 mm x 40 mm of size 510 mm long in front and 480mm long in rear as per drg. |
| 23 | Taking down carefully unservicable arm rest and S&F new arm rest of size 65x25mmx 610mm as per drg. |
| 24 | Taking down carefully unserviceable corner and S&F new corner made out of 2nd class hard wood complete all as shown on drg. |
| 25 | M&L for recaning the chair Easy same with new 2mm wide oval type white plastic cane and bordering with 4mm wide white plastic cane complete along with fixing 04 Nos PVC toes in each chair after removing old pvc toes as directed by Engr in Charge. |
| 26 | Removing old stains and polish from old chair dining by using electric motor grinder and emery paper and preparing wooden surface by applying burnt seina /colour and wooden putty. after preparation applying Three coats of polish made up of Spirit and danlakh to get uniform finish shade as directed by GE. |
| 27 | TABLE DINING 6/8 PERSONS:FD-273,30(M) Taking down carefully unserviceable top and S&F new top for table dining 8 Persons of size 1800 x 900 x 18/19mm made of prelaminated MDF board exterior grade ISI marked with teak wood beading all round 4 mm thick all as shown on drg. |
| 28 | Ditto all as per item No 27 above but for table dining 6 persons of size 1500 x 900 x 18/19 mm complete. |
| 29 | Taking down carefully unserviceable legs and S&F new legs of size 75 x 40 x 742 mm made out of 2nd Class hard wood all as specified and shown on drg. |
| 30 | Taking down carefully unserviceable long rails and S&F new long rail of size 25 x 100 x 1800 mm made out of 2nd class hard wood complete all as shown on drg. |
| 31 | Taking down carefully unserviceable long rails and S&F new long rail of size 25 x 100 x 1500 mm made out of 2nd class hard wood complete all as shown on drg. |
| 32 | Taking down carefully unserviceable short rails and S&F new short rail of size 25 x 100 x 900 mm made out of 2nd class hard wood complete all as shown on drg. |
| 33 | Taking down carefully unserviceable stiffener and S&F new stiffener made out of 2nd class hard wood 25 mm thick and 100 mm wide complete all as shown on drg. |
| 34 | Taking down carefully unserviceable corner and S&F new corner made out of 2nd class hard wood complete all as shown on drg. |
| 35 | Taking down carefully unserviceable shoe and S&F new PVC/hard rubber shoe complete all as directed |
| 36 | Removing old stains and polish from old table Dining six/Eight person by using electric motor grinder and emery paper and preparing wooden surface by applying burnt seina /colour and wooden putty. after preparation applying Three coats of polish made up of Spirit and danlakh to get uniform finish shade as directed by GE. |
| 37 | BED PLYTOP : FD-246Taking down carefully unservicable long rails of bed plywood top and S& F of new long rails made of 2nd Class hard wood all as spefied and shown on drawing. |
| 38 | Taking down carefully unserviceable ply wood teak face and S&F 4mm thick one side teak face ply wood ISI Marked BWR of size 780 x 340 mm on both side of head board rest all as per drg. |
| 39 | Ditto all as per item No 38 above but size 780 x180 mm for foot boards. |
| 40 | Taking down carefully unserviceable plywood top and S&F new commercial plywood 12 mm thick 7'x3' BWR confirming to IS: 303 as shown on drg. |
| 41 | Taking down carefully unserviceable bottom rails of bed ply wood top and S & F of new bottom rails of 2nd Class hard wood of required shape and size all as specified and shown on drawing. |
| 42 | Taking down carefully unserviceable head board and S & F of new head board made of 2nd Class hard wood of required shape and size all as specified and shown on drawing. |
| 43 | Taking down carefully unserviceable l foot board and S & F new foot board made of 2nd Class hard wood of required shape and size all as specified and shown on drawing. |
| 44 | Taking down carefully unserviceable corner and S&F corner made of 2nd class hard wood to strengthen long rails and legs all as specified |
| 45 | Removing old stains and polish from old table by using electric motor grinder and emery paper and preparing wooden surface by applying burnt seina /colour and wooden putty. after preparation applying Three coats of polish made up of Spirit and danlakh to get uniform finish shade as directed by GE. |
| 46 | TABLE OFFICE OFFICER WOODEN: DB-4119Taking down unserviceable drawer and S & F the same with new drawer made out of 18/19m MDF Board and knob complete as per drawing and as directed by Engineer-in-charge. |
| 47 | Supply and fix new glass top transparent for table office officer wooden of size 1800 mm x 750 mm x 12 mm duly grinded and webled at all around edges for table top all around as per drg & as directed |
| 48 | Removing old stains and polish from old table by using electric motor grinder and Emery paper and preparing wooden surface by applying burnt seina /colour and wooden putty. after preparation applying Three coats of polish made up of Spirit and danlakh to get uniform finish shade as directed by GE. |
| 49 | TABLE OFFICE CLERK WOODEN: DB-4120 Taking down carefully unserviceable drawer and S & F the same with new drawer and knob complete as per drawing and as directed |
| 50 | Supply and fix new glass top transparent for table office officer wooden of size 1500 mm x 750 mm x 12 mm duly grinded and webled at all around edges for table top all around as per drg & as directed |
| 51 | Removing old stains and polish from old table by using electric motor grinder and emery paper and preparing wooden surface by applying burnt seina /colour and wooden putty. after preparation applying Three coats of polish made up of Spirit and danlakh to get uniform finish shade as directed by GE. |
| 52 | REPAIR TO TABLE DRESSING LADIES: FD-251/ FD-232 Removing of Old Unserviceable top of dressing table and S&F new top made out ofnew 18/19 mm thick Prelaminated MDF board exterior grade approved by GE exposed adges shall be 4 mm thick teak wood bedding find the with polish. |
| 53 | Taking down carefully unserviceable sliding glass shutter and S&F glass shutter 5.0 mm thick, 550mm x 380mm with aluminum channel of table dressing ladies as as the drawing and as directed. |
| 54 | Taking down carefully unserviceable mirror and S & F new mirror 366mm x 1220 x 5.0mm thick complete alongwith beeding all around and back 6mm thick commercial plywood of table dressing ladies, complete all as shown in drawing and as directed. |
| 55 | Taking down carefully unserviceable back frame and S&F back frame made out of 6mm thick commercial ply wood and 45mm x 40mm 2nd class hard wood frame, as per existing, complete as as specified and directed. |
| 56 | Taking down carefully unserviceable knob of drawer and S&F chromium plated knob 25mm dia 24mm length of best quality as approved. |
| 57 | Taking down carefully unserviceable drawer and S&F drawer of table dressing ladies made out of pre laminated MDF Board as per existing/drawing complete all as specified and directed. |
| 58 | Taking down carefully unserviceable legs and S&F legs of table dressing ladies with 2nd class HW, as per existing/drawing, complete all as specified and directed. |
| 59 | Taking down carefully unserviceable side long rail and S&F side long rail , jointed to leg of table dressing ladies with 2nd class HW, as per existing/drawing, complete all as specified and directed. |
| 60 | Taking down carefully unserviceable short rail and S&F short rail of table dressing ladies with 2nd class HW, as per existing/drawing, complete all as specified and directed. |
| 61 | TABLE DRESSING GENTS : FD-230/31Taking down carefully unserviceable top of table dressing gents & S&F table top with 18/19mm thick prelaminated MDF board exterior grade approved by GE, exposed edges shall be 4mm thick teak wood edging finish duly polished, all as per existing and fixed complete. |
| 62 | Taking down carefully unserviceable complete mirror and S&F new mirror and of size 380mm x 760mm x 5.0mm thick complete all around beeding and back made out of 6mm thicck commercial ply including 2 nos of key plate all as shown on drg, and directed by the Engineer-in-Charge. |
| 63 | Taking down carefully unserviceable back frame and S&F back frame made out of 35mm x25mm 2nd class hard wood & 6mm thick commercial ply grade BWR, type BB, all as shown on drg, and directed by the Engineer-in-Charge. |
| 64 | Taking down carefully unserviceable knob and S&F chromium plated 25mm dia, as approved by the Engineer-in-Charge of best quality. |
| 65 | Taking down carefully unserviceable drawer and S&Fnew drawer of table dressing gents made out of prelaminated MDF board as per existing/drawing complete all as specified and directed. |
| 66 | Taking out sagged and loose dressing table gents from wall and re-fix the same properly to wall with all accessories such as screw,clips, plugs, clamps, etc complete all as directed |
| 67 | TABLE BED SIDE: FD-276 Taking down carefully unserviceable top and S&F top of table bed side of Prelaminated MDF board exterior grade 18/19 mm thick of same size and shape with teak wood edging all aound as shown in drg. |
| 68 | Taking down carefully unserviceable sides and S&F sides of table bed side of Prelaminated MDF board exterior grade 18/19 mm thick of same size and shape as shown in drg. |
| 69 | Taking down carefully unserviceable shelf and S&F shelf of table bed side of Prelaminated MDF board exterior grade 12 mm thick of same size and shape as shown in drg. |
| 70 | Taking down carefully unserviceable ply from the back and S& F new commercial ply wood 6 mm thick conforming to IS: 303 BWR grade all as specified and shown in drg. |
| 71 | PEG TABLE: FD-277Dismantling of old and unserviceable top and S&F new top made of pre laminated MDF board exterior grade 18/19 mm thick including 4 mm thick teak wood beading all round all as specified and directed. |
| 72 | Taking down carefully unserviceable legs and S&F new legs made of 2nd Class hard wood as per drg. |
| 73 | Taking down carefully unserviceable long rail and S&F new long rail made of 2nd Class hard wood as per drg. |
| 74 | Taking down carefully unserviceable short rail and S&F new short rail made of 2nd Class hard wood as per drg. |
| 75 | Taking down carefully unserviceable Stiffener and S&F new Stiffener made of 2nd Class hard wood as per drg. |
| 76 | Removing old stains and polish from old table by using electric motor grinder and emery paper and preparing wooden surface by applying burnt seina /colour and wooden putty. after preparation applying Three coats of polish made up of Spirit and danlakh to get uniform finish shade as directed by GE. |
| 77 | SIDE BOARD: FD-241Taking down carefully unserviceable top and S&F with new top made of prelaminated MDF board exterior grade 18/19 mm thick of same size and shape as shown on drg. |
| 78 | Taking down carefully unserviceable sides and S&F new sides made of prelaminated MDF board exterior grade 18/19 mm thick of same size and shape as shown on drg. |
| 79 | Taking down carefully unserviceable back ply wood 1200x635 x 6 mm and S&F new commercial ply wood 6 mm thick confirming to IS: 303 BWR grade. |
| 80 | Taking down carefully unserviceable drawer and S&Fnew drawer of side board made out of prelaminated MDF board as per existing/drawing complete all as specified and directed. |
| 81 | Taking down old knobs and S&F chromium plated knobs complete all as specified and shown on drg. |
| 82 | Taking down carefully unserviceable shutters of the cup board and S&F new complete shutter made of 18/19mm thick prelaminated MDF board exterior grade as per drg. |
| 83 | Taking down carefully unserviceable bottom and S&F new bottom made of prelaminated MDF board exterior grade 18/19 mm thick of same size and shape as shown on drg |
| 84 | Taking down carefully unserviceable Shelf and S&F new Shelf made of prelaminated MDF board exterior grade 18/19 mm thick of same size and shape as shown on drg |
| 85 | Taking down carefully unserviceable bottom frame and legs and S&F new bottom frame and legs made of 2nd Class hard wood as per drg. |
| 86 | TABLE CENTRE: FD-274,Taking down carefully unserviceable top and S&F new top made of prelaminated MDF board exterior grade 18/19 mm thick including 4 mm thick hard wood beading all round all as specified and directed. |
| 87 | Taking down carefully unserviceable legs and S&F new legs made of 2nd Class hard wood as per drg. |
| 88 | Taking down carefully unserviceable short rail and S&F new short rail made of 2nd Class hard wood as per drg. |
| 89 | Taking down carefully unserviceable long rail and S&F new long rail made of 2nd Class hard wood as per drg. |
| 90 | Removing old stains and polish from old table by using electric motor grinder and emery paper and preparing wooden surface by applying burnt seina /colour and wooden putty. after preparation applying Three coats of polish made up of Spirit and danlakh to get uniform finish shade as directed by GE. |
| 91 | Chair dining cushioned FD/E6/MAP/10 (R)S&F new components of 2nd class HW (shisham) including dismantling unservicable one all as specified and as directed.(a) Rear leg |
| 92 | (b) Front leg |
| 93 | (c) Side/back/front rails |
| 94 | (d) Stiffener |
| 95 | (e) Providing new 75mm Cushion with tapestry cloth fixed with 12mm ply of appropriate size of 32 density cool foam complete with dismantling old one as per sample of tapestry held with this office Make- Sleepwell/Featherfoam. Cost of tapestry cloth shall not be less than Rs 400/-per meter |
| 96 | (g) Preparation of sufaces of chair dinning cushioned by throughly rubbing with emery paper, applying raw/burnt seina uniformly from chair dinning and polishing with french polish one or more coat to obtain a glossy finish complete all as specified and as directed. |
| 97 | Hat Stand (FD-361/362) (a) S & F 4mm thick teak face Ply to make front side along with teak wood edging of size 35mm x6 mm including dismantling of old unserviceable one complete all as specified, directed and shown on drawings. |
| 98 | (b) S & F of Back commercial plywood including dismantling unserviceable one complete all as specified, directed and shown on drawings. |
| 99 | (c) S & F of brass Pegs of size 75mm(W) x 120mm (H) including dismantling of old unserviceable one complete all as specified, directed and shown on drawings. |
| 100 | (d) S & F of 5mm looking mirror with edging including dismantling of old unserviceable one complete all as specified, directed and shown on drawings. |
| 101 | (e) M & L for preparation of surfaces with sand / emery paper and applying french polish one or more coats of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with bee's wax complete along with two key plates all as specified and as directed. |
| 102 | TABLE WRITING: FD-33/249 /275Taking down carefully unserviceable top and S&F new top of size 1145 x 600 x 18/19 mm made of prelaminated MDF board exterior grade ISI marked and hard wood beading all round 4 mm thick shall be provided all as specified and shown on drg. |
| 103 | Taking down carefully unserviceable legs and S&F new legs made of 2nd class hard wood as per drg. |
| 104 | Taking down unserviceable drawer and S/F new made out of 18/19 thick pre laminated MDF board including chromium plated knobs etc in bottom of drawer complete all as specification and directed. |
| 105 | Taking down carefully unserviceable stiffeners and S&F new stiffner of 2nd class hard wood as per drg. |
| 106 | Taking down carefully unserviceable Long rail and S&F new long rail made of second class hard wood as per drg. |
| 107 | Taking down carefully unserviceable Short rail and S&F new short rail made of second class hard wood as per drg. |
| 108 | Taking down carefully unserviceable Complete box and S&F new box incl drawer made of 18mm prelaminated MDF board exterior grade with 4mm thick beading hung with SS piano type hinges including one knob complete as per drg. |
| 109 | Removing old stains and polish from old table writing by using electric motor grinder and emery paper and preparing wooden surface by applying burnt seina /colour and wooden putty. after preparation applying Three coats of polish made up of Spirit and danlakh to get uniform finish shade as directed by GE. |
| 110 | Sofa Set Five/four seater FD-281/ FD-373/ FD-258 Removing old unserviceable cushion with cover complete and S&F new cushions of 100 mm thick 32 Density (21`x 22`) with tapestry cloth cover (rates of cloth not less than 400 Rs per Mtr).cover shall be of overlapping type for easy open /close. Make of cushion Sleepwell Feather Foam / Kurlon (FD-281/ FD-373/ FD-258) (Sofa set 5/4 seater) |
| 111 | Removing old unserviceable cover and S&F new tapestry cloth cover (rates of cloth not less than 400 Rs per Mtr).Cover shall be made on overlapping type on one side to easy remove for cleaning/washing.(Sofa set 5/4 seater) |
| 112 | Removing old stains and polish from old sofa set five/four seater by using electric motor grinder and emery paper and preparing wooden surface by applying burnt seina /colour and wooden putty. after preparation applying Three coats of polish made up of Spirit and danlakh to get uniform finish shade as directed by GE. Please Enable Macros to View BoQ information |
