|
| 1 | Item Rate BoQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) Tender Inviting Authority: Garrison Engineer (AF) Gorakhpur Name of Work: REPAIR OF FLOORING, TILING, PLUMBING, SANITARY, FITTINGS, PAINTING, PLASTER, MONKEY CAGING, REPAIR COMPUND WALL, DRAIN CULVERT, CONCERTINA COIL, CHAIN LINK FENCING, BARBED WIRE FENCING, STRUT GATES, HARD STANDING AND CLEANING OF SEWAGE LINES, SCEPTIC TANKS, SOAKED WELLS, SUMP WELLS, MANHOLES COVER, IN 12 AFH, 274 SU, 756SU & MES AREA AT AF STN GORAKHPUR UNDER GE(AF) GORAKHPUR. Contract No.: GE(AF)/GKP/E-17 OF 2026-27 File No. 9455/E8 Serial Page No.15 Name of the Bidder/ Bidding Firm / Company : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of item Item Code / Make Quantity Units Estimated Rate inRs. P Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency BASIC RATE In Figures To be entered by the Bidder Rs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e. DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit, if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT Without Taxes inRs. P TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words |
| 2 | Taking down cement or lime plaster any description incl racking out joints, hacking for keys, scrubbing down with water etc complete all as specified and directed. |
| 3 | Supply only Liquid water proofing compound complete all as specified and directed. |
| 4 | M&L Rendering 15mm thick in CM 1:4 on other then fair faces of brick work or concrete surfaces with liquid WPC @ 3% of qty of cement or as per manufacturer instructions ( WPC will be measured and paid separately), surface finished even and smooth without using extra cement complete all as specified as directed. |
| 5 | M&L Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed |
| 6 | M&L Rendering 10mm thick in CM 1:6 on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified as directed. |
| 7 | M&L Rendering 5mm thick in CM 1:3 on celing, surface finished even and smooth without using extra cement complete all as specified as directed. |
| 8 | M& L preparation of new plastered surface of wall and applying two coat of cement base paint over a coat of alkali resistant primer on new surface complete all as specified and directed.(Note steel Grey shade and tint shall be decided by the GE) |
| 9 | M & L for prepartion of new plasterred surfaces of wall and applying two coat of oil bond distermper over a coat of 2 mm thick wall care putty complete all specified and directed |
| 10 | M & L for preparation of new plastered surfaces of ceiling and applying three coat of white wash complete all as specified and directed. |
| 11 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 12 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over 15 mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 13 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over 15 mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 14 | M&L for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc.set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over 15 mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 15 | ditto as above but in skirting/dado etc over 10 mm thick Cement plaster 1:4 complete all as specified and directed. |
| 16 | M&L for vitrified coloured ceramic tiles (light shade) 10 mm thick (square/rectangular) area of each tiles n exc 0.36 sqm , in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over 15 mm thick screed bed in CM 1:6 complete all as specified and as directed. |
| 17 | ditto as above but in skirting/dado etc over 10 mm thick Cement plaster 1:4 complete all as specified and directed. |
| 18 | M&L for glazed ceramic wall Coloured tiles in vertical surface 300x450mm x 7mm set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over 10 mm thick rendering in CM 1:4 complete all as specified and as directed. |
| 19 | Dismantling of Stone slabs and tiles laid bedded and pointing in any mortor,any description or thickness in floors, aprons complete all as specified and as directed. |
| 20 | M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platform sand like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite. the surface complete all as specified and directed. |
| 21 | M&L 75mm thick cement concrete 1:4:8 type D2 using (40mm graded stone aggregate) as in sub base complete all as specified. |
| 22 | M&L Chequered cement concrete coloured tiles with grey cement & pigment 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors laid over screed bed or beding layer of mortar 20mm thick in cement mortar 1:4 for laying floor finishes complete all as specified . |
| 23 | M&L 100mm thick cement concrete 1:4:8 type D2 using 40mm graded stone aggregate as in sub base complete all as specified and directed. |
| 24 | M&L for Machine pressed precast concrete interlocking paver block vibro compacted rubber moulded with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. complete all as specified and directed by Engr-in-Charge. |
| 25 | Demolition of cement concrete un- reinforced of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 26 | M&L for providing cement concrete type B0 1:2:4 (12.5mm graded aggregate) as in copings complete all as specified and directed. |
| 27 | M&L 100mm thick PCC 1:2:4 type B-1, using 20mm graded stone aggregate as in hard standing finished even and smooth without using extra cement including spike rolling to surface complete all as specified and directed |
| 28 | M&L 75mm thick cement concrete (1:3:6) type C-2, (1:3:6) using 40mm graded stone aggregate as in plinth protection and path laid in panels not more than 3.0 mtr in lenght laid to slope 1:30 including forming joints 10mm wide and duly filled with mastic bitumen (01 part bitumen mixed with 03 Parts of sand) surface,complete all as specified and directed.(Note:- The quoted tates are deemed to be inclusive of material against work and joints fillings.) |
| 29 | M&L for Glass dividing strips, 3 mm thick Width of strip in mm 38mm fixing in CM complete all as specified |
| 30 | Dismantling water tanks exc 250 but n.exc 500 ltrs and removing to store complete all as specified & directed. |
| 31 | Dismantling water tanks exc 500 but n.exc 1000 ltrs and removing to store complete all as specified & directed. |
| 32 | S&F in repair 500 ltr capacity rotantional moulded triple layer polythylene water storage tanks white color (cylindrical vertical with closed top ) and suitable size of MS tasla with locking system hoisted and fixed in position all as specified in SSR Part I including 20mm dia Ball valves standard of PTMT any colour high pressure with epoxy coated aluminium rod & high density plastic ball screwed,for iron pipe and fixed.(Minimum weight 20mm - 210gms complete all as specified and directed. |
| 33 | S&F in repair 1000 ltr capacity rotantional moulded triple layer polythylene water storage tanks white color (cylindrical vertical with closed top ) and suitable size of MS tasla with locking system hoisted and fixed in position all as specified in SSR Part I including 20mm dia Ball valves standard of PTMT any colour high pressure with epoxy coated aluminium rod & high density plastic ball screwed,for iron pipe and fixed.(Minimum weight 20mm - 210gms complete all as specified and directed. |
| 34 | M&L for cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc of exc. 250 liters & n.exc. 500 liters capacity of tanks with bleaching powder @ 0.25 Kg per tank complete all as specified and directed.(Note :Marking of Cleaning date with white & black paint) |
| 35 | M&L for cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etc of exc. 500 liters & n.exc. 1000 liters capacity of tanks with bleaching powder @ 0.25 Kg per tank complete all as specified and directed. (Note :Marking of Cleaning date with white black paint) |
| 36 | S&F in repair ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe or brass ferrule and fixed of 20mm bore (Minimum weight 210 gms.) complete all as specified and directed. |
| 37 | Taking up or down steel tubing and connections 15mm bore including cleaning for refixing or removing from site complete all as directed. |
| 38 | Taking up or down steel tubing and connections 20mm bore including cleaning for refixing or removing from site complete all as directed. |
| 39 | S&F 15mm bore steel water tubes \\"medium grade\\" galvanized with all fittings such as bends, elbows tee etc and fixed to walls and ceiling in floor complete all as directed. |
| 40 | S&F 20mm bore steel water tubes \\"medium grade\\" galvanized with all fittings such as bends, elbows tee etc and fixed to walls and ceiling in floor complete all as directed. |
| 41 | Refixing old steel tubing and connection in new or old position (wall, floor, ceiling etc) of 15mm bore of pipe including cleaning for refixing or removal from the site complete all as specified and directed. |
| 42 | Refixing old steel tubing and connection in new or old position (wall, floor, ceiling etc) of 20mm bore of pipe including cleaning for refixing or removal from the site complete all as specified and directed. |
| 43 | S&F in repairs bib taps 15 mm bore long body brass, chromium plated, fancy type with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 44 | S&F in repairs 15 mm dia brass angle cock with flange fancy type, with capstan head chromium plated screwed down high pressure with or without lettered with long screwed shank and fly nut screwed complete all as specified and directed. |
| 45 | S&F in repairs brass chromium plated two way angle cock, of 15 mm bore complete all as specified and directed. |
| 46 | S&F in repairs 15mm bore long body pillar tap fancy type cast copper alloy chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screw shanks screwed for iron pipe or union complete all as specified and as directed. |
| 47 | S&F in repairs stop valves 15mm bore cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union complete all as specified and as directed. |
| 48 | S&F in repair 32/40 mm spring type PVC waste pipe fixed to WHB & Sink etc complete all as specified and directed ( Note minimum length of each pipe should more than 0.70RM) complete all as specified and directed. |
| 49 | S&F in repairs PVC connection 15mm size with PTMT nuts of length 60CM long complete all as specified and directed |
| 50 | S&F in repairs Vitreous china WHB, white, flat back, of size 550 x 400 mm including brackets, waste coupling 32mm, and waste Pipe, 32mm complete all as specified and directed. |
| 51 | S&F in repair 600X450 mm beveled edge mirror of selected quality glass 5.5 mm thick mounted on and including 6 mm thick AC building board or commercial plywood and fixed with two nos hanging clips complete all as specified and directed. |
| 52 | S&F in repair EWC. wash down water closet pan white excl. flushing cistern & flush pipe incl. plastic water closet seat cover closed pattern with flat bottom and cover and hinging device as per manufacturer instruction incl. connection to trap drain pipe or outgoing pipes and to flushing pipe anti syphonage pipe etc.complete. |
| 53 | S&F in repairs Vitreous China water closet squatting pan, 'Orrisa' pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete including connection to trap, and to flushing pipe, anti syphonage pipe etc. including trap set in and including concrete and making good to floor. complete all as specified and directed. |
| 54 | S&F in repair PVC 10 Ltrs valve less, symphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete with flush pipe etc. ISI approved complete all specified and directed. |
| 55 | S&F in repairs brass chromium plated tubular towel rail 20mm dia 600 mm long, fixed complete all as specified and as directed. |
| 56 | S&F in repair plastic water closet seat cover white, closed pattern with flat bottom & cover and aluminium anodised hinging device complete all as specified and directed. |
| 57 | S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified. |
| 58 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) |
| 59 | S&F 110mm dia PVC (SWR) soil, waste and vent pipes single socketed in any length with rubber ring joints, fixed to walls complete all as specified and directed. |
| 60 | S&F 75mm dia PVC (SWR) soil, waste and vent pipes single socketed in any length with rubber ring joints, fixed to walls complete all as specified and directed. |
| 61 | S&F 110 mm dia PVC (SWR) bends any radius complete all as specified and directed. |
| 62 | S&F 75 mm dia PVC (SWR) bends any radius complete all as specified and directed. |
| 63 | S&F stack clamps made out from 50 x5mm size flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof for 110 mm bore of pipe etc complete all as specified and directed. |
| 64 | S&F 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed. |
| 65 | S&F in repairs PTMT grating 125mm dia complete all as specified and directed. |
| 66 | M&L preparation of old painted steel surfaces of any description, over 10cm width or girth and apply one coat of synthetic enamel paint complete all as specified and as directed . |
| 67 | M&L for preparation of old painted wooden based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 68 | M&L for complete removal of existing treatment, by scrapping existing painted surfaces of wall and applying two coats of Oil Bound Distemper over 2mm thick wall care putty on wall complete all as specified and as directed by Engr-in-Charge. |
| 69 | Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed. |
| 70 | M&L Brick work with sub class B bricks straight or curved on plan exc 6m mean radius built in CM 1:4 complete all as specified and directed at site. |
| 71 | Ditto as above but except bricks complete all as specified and directed at site. |
| 72 | M&L for brickwork with subclass 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and dirceted. |
| 73 | Dismantling wrought iron or MS work of any description not otherwise provided for complete all as specified and dirceted. |
| 74 | M&L for Joist, channel, angle, or tee sections, Fe 410 -W (Gde E- 250) quality A fixed independently, with or without connecting plates, etc complete all as specified and directed. |
| 75 | M&L for hot rolled steel flat Framed work of water tanks mesh welded and similar work conforming Fe 410 -W (Gde E- 250) quality A Complete all as specified and directed. |
| 76 | S&F 4mm dia galvanised hard drawn steel wire fabric, 50x50 mm square mesh, made up into mattresses or cages, lapped, wired and laid in position, including closing after filling complete all as spcified and directed. |
| 77 | S&F in repair Harrison rails/curtain rod, stainless steel with fixing brackets, stops, rollers,end ball& round block etc complete all as specified and directed. |
| 78 | Dismantling of structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed. |
| 79 | M&L for Framed work as in doors or gates or grating of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing Fe 410 -W (Gde E- 250) complete complete all as specified and as directed. |
| 80 | M&L preparation of new painted steel surfaces of any description, over 10cm width or girth and apply two coat of synthetic enamel paint over a coat of red oxide complete all as specified and as directed . |
| 81 | Dismantling brick or brick tiles laid bedded and pointed in any type of mortar etc complete all as specified and directed. |
| 82 | M&L bricks, sub class B, laid flat,bedded and jointed in CM 1:6 and pointed in CM 1:3 in drain, old size bricks complete all as specified and directed at site. |
| 83 | Labour only for bricks, sub class B, laid flat,bedded and jointed in CM 1:6 and pointed in CM 1:3 in drain, old size bricks complete but except bricks ( only serviceable Brick obtained from dismantling complete all as specified and directed at site. |
| 84 | M&L bricks, sub class B, laid on edge,bedded and jointed in CM 1:6 and pointed in CM 1:3 in drain, old size bricks complete all as specified and directed at site. |
| 85 | Labour only for brick work , sub class B, laid on edge,bedded and jointed in CM 1:6 and pointed in CM 1:3 in drain, old size bricks complete but except bricks ( only serviceable Brick obtained from dismantling) complete all as specified and directed at site. |
| 86 | M&L for providing cement concrete 1:2:4 type B0 using (12.5mm graded aggregate) as in copings complete all as specified and directed. |
| 87 | M&L plain cement concrete (1:2:4) type B-2 using 40mm graded stone aggregate in surface channels and drains complete all as specified and directed. |
| 88 | Extra for forming fair finished drain or channel up to 30 cm inner girth in cement concrete using extra cement incl forms, moulds, mitred/stopped ends etc. |
| 89 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out embedded portion and making good disturbed ground post embeded in cement concrete. |
| 90 | Taking down chain link fencing fixed to any type of standard rails, straining bolts etc complete all as specified and directed. |
| 91 | M&L PCC 1:3:6 type C2 40mm graded stone aggregate as in fixing of fencing post and mass concrete complete all as specified and directed. |
| 92 | S & F mild steel work as in posts and struts in fencing incl cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets incl all necessary drilling, bolting or rivetting etc and similar work confirming to Fe 290 Gd E-165. complete all as specified and as directed. |
| 93 | Supply only chain link MS galvanised fencing, any size or type of minimum dia 3.15 mm or above as directed. (Weight of chain link fencing shall be decided through a BOO) complete all as specified and directed. |
| 94 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standard rails, straining bolts etc.complete all as specified and directed. |
| 95 | M&L for mild steel round bar 10 to 12mm dia confirming Fe-410-W (Gde.E-250) Fe 290 (Gde - E-165) as in stiffeners to chain link fencing etc all as specified and directed. |
| 96 | S&F in repair Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing in repairs to any type of standard rails straining bolts, including securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc. as directed (each line of wire to be measured) complete all specified and directed. |
| 97 | S&F in repair 610mm dia punched tape concertina coil (effective dia 550mm at strech length of coil 6m) with two handle and spikes at both end of coil with dovetail clips [18 SWG], incl razor wire [7 No], 6m length of each wire medium size, barbed length 20mm width 14mm, incl 51 pins, 128 nos of clips in each coil incl 230gm/ Sqm Zinc coating on core wire complete all as specified. |
| 98 | Refixing only existing serviceable concertina coil and razor blade wire to existing fencing/posts, including necessary binding wire, clips, tying arrangements and adjustments for proper alignment and tensioning, complete all as specified and as directed. |
| 99 | Demolition of cement concrete (reinforced) in RCC column ( reinforcement cut as required to facilitate demolition) complete all as specified and directed |
| 100 | M&L for PCC (1:4:8) type D-2, (using 40mm graded stone aggregate) as in foundation,filling and mass concrete complete all as specified & directed. |
| 101 | M&L for Precast RCC 1: 2:4 type B1 (nominal mix ) using (20mm graded stone aggregates) as in drain/MH cover slab etc complete all as specifide and directed . |
| 102 | M&L plain cement concrete (1:3:6) type C-2 using (40mm graded stone aggregate) in surface channels and drains complete all as specified and directed. |
| 103 | S&F 10mm & over diaTMT bars cut to legth, bent to shape required including cranking bending spirally for hooping for slab for manhole etc complete all as directed. |
| 104 | S&F 6mm to 8mm diaTMT bars cut to legth, bent to shape required including cranking bending spirally for hooping for slab for manhole etc complete all as directed. |
| 105 | S&F framed work such as grills, gate etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conf to Fe 290 Gde E 165 complete all as specified and directed. |
| 106 | S&Fin repair PVC (SWR) P or S trap 125/110 mm,setting and jointing with solventcement complete all specified and directed. |
| 107 | M&L in repair 75mm dia PVC (SWR) floor trap, plane with grating including jointing with solvent cement complete all specified and directed. |
| 108 | Excavation in trenches n.exc 1.5M wide and n.exc 1.5M depth and n.exc 10 Sqm on plan and getting out in any type of soil (for manholes and sewage lines, drain etc.) .complete all as specified and directed at site. |
| 109 | Returning filling in including spreading watering and well raming in layer . Exc 25 cm each in loose/soft soil complete all as specified and directed. |
| 110 | Removing excavated material to a distance not exc 50 m and depositing where directed, complete all as specified and directed |
| 111 | Demolition and breaking up 150mm dia drain pipes ( salt glazed ware, AC or reinforced Concrete ) set in cement mortar complete all as specified. |
| 112 | Concrete bed to drain pipes in PCC 1:4:8 type D2 using 40mm grade stone aggregate including packing under and haunching against the sides of pipe after they are laid and tested for the following 150mm bore pipe complete all specified and directed. |
| 113 | Supply and fixing reinforced cement concrete pipes, Class NP-2, 150 mm internal dia, laid and jointed complete with RCC collars, complete all as specified and as directed. |
| 114 | Demolition and breaking up 200mm dia drain pipes ( salt glazed ware, AC or reinforced Concrete ) set in cement mortar complete all as specified. |
| 115 | M&L for Concrete bed to drain pipes in PCC 1:4:8 type D2 using 40mm grade stone aggregate including packing under and haunching against the sides of pipe after they are laid and tested for the following 200mm bore pipe complete all specified and directed. |
| 116 | Supply and fixing reinforced cement concrete pipes, Class NP-2, 200 mm internal dia, laid and jointed complete with RCC collars, complete all as specified and as directed. |
| 117 | M&L for Cutting into existing manholes for connecting new drains and making good to pipe and rendering cutting out existing bending for and forming branch channel in cement concrete 1:2:4 type B1 smooth finished and reforming benching as required for pipe 150mm bore complete all as specified and directed. |
| 118 | M&L for De-silting of sewer line 150/200mm dia with mechanical device like super sucker machine, high pressure jetting machine/gantry machine or any other mechanical device & cleaning site all as specified and directed by Engineer-in-Charge. |
| 119 | Material and labour for Cleaning/removal of blockage from bathroom,EWC/IWC (any type), kitchen, WHB and urinals including connected Nahani traps / gully traps/floor traps, grating of trap, waste pipes, pipe in any length upto first manhole etc choked with mud / other accumulated sludge and getting out, washing thoroughly at any location, at any floor by rodding/choke remover/Pressure technique/manually or otherwise to clear blockage upto entire satisfaction of users,including refixing of oval assess door covers with new nuts & washers and refixing manhole covers, including removing of all wastes, solid or liquid sludge and depositing the sludge in a pit (at empty/open area) of suitable size at a distance exceeding 50 metres from the building where directed and covering the same with the soil obtained from excavation of pit after treating the sludge by spreading the bleaching powder as directed to reduce the foul gases including all excavations and earthwork complete all as specified andas directed .(a) Contractor deploy Minimum 3 Nos employ daily deployed i.e. 1 No in 12 AFH, 01 No in 274 SU and 1 No for 756SU area, complete all as specified and as directed . (b) Contractor or his representative shall report daily at 09.00 AM excluding on Sunday/ National holidays in the office of Engineer-in-Charge/ Complaint cell to receive complaint slip and necessary directions. Complaints received through telephonic message from JE/ Engineer-in-Charge shall also be attended on the same day and the completion of work shall be reported by 05.00 PM of every working day to JE/ Engineer-in-Charge. (c) In case of non attedence of complaints against mention above ser No by on the same day, a penalty of Rs 50/- per day will be recovered from the contractor complete all as specified and as directed . (d) The cost for all necessary T&P such as green female bamboo strips, iron rods, sewage rodding machine, buckets, rope, ladder, safety mask, bleaching powder etc and all other other materials for execution of the work shall be included in the unit rate complete all as specified and as directed . (e) A complaint register shall be maintained by JE and proper record of complaints received and attended with date and time shall be recorded and shall be signed daily by both the parties. Complaint register shall be kept on record of Engineer-in-Charge after completion of work complete all as specified and as directed . |
| 120 | Cleaning of septic tanks / Manholes including bailing out water, from it and removing sludge and blockages from inlet and outlet of sewer lines including taking out the excavated sludge and carting away the same to a distance far away from residential/office area and cover the same with fresh earth and recommissioning the septic tank including site clearance to a distance of 3 Metre around septic tank complete all as specified and directed for the following capacity :- (a) For Manhole n. exc 1.50m deep. |
| 121 | (b) For Manhole exc 1.50m but n.exc 3m deep. |
| 122 | (c) For septic tank of 25 to 50 user capacity. |
| 123 | Dewatering of septic tank, sump wells including bailing out water, from it and removing sludge and blockages from inlet and outlet of sewer lines including taking out the excavated sludge and carting away the same to a distance far away from residential/office area and cover the same with fresh earth and recommissioning the same including site clearance to a distance of 3 metre around complete all as specified and directed. |
| 124 | Cleaning of soil pipe lines of any type of 100mm dia by roding from man hole to man hole cleaning eyes and flushing with water for the cleaning incl removal of sludge and re-setting of man holes cover complete. |
| 125 | Ditto all as per item above but for 150mm dia pipe. |
| 126 | Ditto all as per item above but for 200mm dia pipe. |
| 127 | S&F in repair CP Grating 125 mm size complete all as specified as directed. |
| 128 | S&F in repair vitreous china urinal half stall type white complete including providing and fixing plugs,etc all fittings including spreader (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) complete all as specified and directed. Total in Figures 0.0 0.0 INR Zero Only 4.0 Construction of chamber for 100mm sluice plates item5 10.0 Nos Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
