|
| 1 | Taking down chowkats or frames exc 1.5sqm but n.exc 4 sqm each but with shutter (without taking off shutter from the frame) including making good disturbed portion to match the adjoing surfaces etc complete all as specified and as directed |
| 2 | All as per Item above but n.exc 1.5 sqm etc complete all as specified and as directed |
| 3 | Taking down only shutter of any description exc 1 sqm but n.exc 2 sqm each etc complete all as specified and as directed |
| 4 | All as per Item above but n.exc 1 sqm each etc complete all as specified and as directed |
| 5 | Dismantling boarding, of any size and any description, fixed in any position with screws etc complete all as specified and directed |
| 6 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and removing all the rubbish as directed by Engineer-in-charge complete all as specified and directed. |
| 7 | Taking down cement plaster on brick or concrete surfaces of wall/ceiling and likes including racking out joints, hacking for keys scrubbing down with water etc any description including removal of rubbish outside MoD land, complete all as specified and directed. Note : The rate quoted by the Contractor is deemed to be included necessary scaffolding and form works. |
| 8 | Dismantling wrought iron or mild steel or aluminium work of any description not otherwise provided for complete all as specified and as directed |
| 9 | Providing and fixing factory made uPVC white colour Sliding window 2.5 / Three track Area not exceeding 2.00 sqm each made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories.Make: Rajshri UPVC coad: RPS 88-01 To 88-08 or equivalent model in makes specified in Appx-B (Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured of payment purpose.) |
| 10 | Providing and fixing factory made uPVC white colour casement (Openable) Door made of extruded profile wilh wall thickness of 2.3mm ( + -0.2mm). Window profile with hollow section with mitlti chamber, frame (60mm x 58mm), sash (60mm x 78mm). T profile (One vertical length in between two shutters) (60mm x 74mm). Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling ol holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 + -0.2mm thick galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27mm), T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall wilh 8mm x 100mm long fasteners. Hardware: [casement door handle made of zinc alloyed (white powder coated). Corner striker. Secondary Strikers. Cylinder. Door transmission gear made of mild steel with multi point locking system with strikes. 3D Hinges of zinc alloyed (white powder coated) [and 5mm thick glazing with selected quality glass.Make:- Rajshri UPVC coad: RPS 60-01 to 60-08 , RPC- 67-05 to RPC- 67-09 or equivalent model in makes specified in Appx-B match with existing door/window(Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose.) |
| 11 | Supply and fix in repair Toughened glass of 6 mm thick in UPVC square window / Door of any Size in each pane and in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes As required. complete all as specified and directed. |
| 12 | Supply and fix Second Class hard wood (teak/oak/mahogany)Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed etc used For Door/window/cupboard or any decryption complete all as specified and directed. |
| 13 | Supply and fix 35mm thick second class hard wood (teak/oak/mahogany), plain framed, paneled shutter of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces the size of rail land stile as per IS 1003 (Part-I) killn seasoned and chemically pressure treated etc complete all as specified and directed. |
| 14 | Supply and fix 30mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 15 | Supply and fix 30mm thick second class hard wood, Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mebers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats but divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers etc complete all as specified and directed. |
| 16 | Material and labour 2nd class hard wood Glazed and skeleton shutters 30mm thick, for windows/ventilators, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass, etc, sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (a), complete all as specified and directed. |
| 17 | Supply and fix 100 mm Butt hinges, stainless steel, with mild steel hinge pin, bright polished and fixed, type B-11 etc complete all as specified and directed. |
| 18 | Supply and fix 200mm long aluminium anodized barrel tower bolts of extruded sections complete all as specified and directed. |
| 19 | Supply and fix 300mm long aluminium alloy, anodized sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet cost of extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed. |
| 20 | Supply and fix for 140mm long floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor complete all as specified and as directed |
| 21 | Supply and fix 150mm extruded aluminium alloy handles, cast type as fixed complete all as specified and directed. |
| 22 | Supply and fix 4 levers Mild steel Mortise lock, vertical type, of size 100 mm etc complete all as specified and directed. |
| 23 | Supply and fix solid PVC door frame of size 50mmx 47mm made out of 5mm wood grains printed PVC sheet reinforced with ms square tube and edges painted to match with printed sheet complete all as specified. |
| 24 | Supply and fix factory made solid panel PVC door shutter 30 mm thick (styled) consisting of frame made out of MS tube for top & bottom rails, MS frame shall be covered with heat moulded plain colour PVC ,C\\" channel having a PVC sheet strip of 20mm width stuck in side with solvent cement for stiles and plain colour PVC sheet for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet bedding and jointed together with solvent cement supplying and fixing in the frame at site all as specified and directed. |
| 25 | Supply and fix 75 mm Butt hinges, stainless steel, with mild steel hinge pin, bright polished and fixed, type B-11 etc complete all as specified and directed |
| 26 | Supply and fix 150 mm long aluminium anodized barrel tower bolts of extruded sections as fixed complete all as specified and directed. |
| 27 | Supply and fix 100mm extruded aluminium alloy handles, cast type as fixed complete all as specified and directed. |
| 28 | Material and labour Anodised aluminium frame for doors, windows, ventilators and partitions with one or more rebates including joining cleat for fixing etc. complete all as specified complete all as specified. |
| 29 | Supply and fix Anodised aluminium Sections for door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges/pivots etc for fixing purpose anodised aluminum snap beading screws etc. complete all as specified. |
| 30 | Supply and fix Anodised aluminium sections for window/ventilator shutters, sliding type without sash bars, aluminium sections weighing not less than 0.55kg/m including necessary jointing cleats, glazing clips, rubber neoprene packing, aluminium snap beading, screws etc complete all as specified and directed. |
| 31 | Supply and fix 4.0 mm thick Sheet glass ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane fixed to Aluminium door/windows/ventilator etc complete all as specified and directed. |
| 32 | Supply and fix 4.0 mm thick Sheet glass ordinary quality and glazing with oil putty in square exc 0.5 sq. m in each pane fixed to Aluminium door/windows/ventilator etc complete all as specified and directed. |
| 33 | Supply and fix 4.0 mm thick Sheet glass ground or obscured or frosted, on one side, ordinary quality and glazing with oil putty in square not exc 0.5 sq. m in each pane fixed to Aluminium door/windows/ventilator . |
| 34 | Supply and fix Anodised Aluminium grill (anodised transparent or dyed to required shade according to IS 1868 with minimum anodic coating of grade AC 15) of approved design / pattern, with approved standard section and fixed to existing frame with Cp brass stainless steel screws @ 200mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening all complete all as specified and directed. |
| 35 | Supply and fix Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed |
| 36 | Supply and fix in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples in Aluminium / wooden / uPVC doors or windows complete all as specified and as directed |
| 37 | Supply and fix aluminium (Die cast) body, door closer, hydraulically regulated designation No.3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg all as specified and directed |
| 38 | Supply and fix in Repair aluminium (Die cast) body, door closer, hydraulically regulated designation No.3, universal type, suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80 Kg all as specified and directed |
| 39 | Supply and fix double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty all as specified and directed. |
| 40 | Supply and fix Framed work such as grills, gratings, sun shed etc with ends of bars shouldered and/or riveted or welded, or forged into spikes, framed guard bars, barred iron doors, ladders, farmed balusters, walk ways, railings, frame work of water tanks and similar work conforming to Fe-410-0 or Fe-310-0 complete all as specified and directed |
| 41 | Material and labour for preparing new or previously untreated steel surface of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 42 | Supply and fix in repair 18/19 mm thick Prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in wall / cub board shutters/selves and the like, etc complete all as specified |
| 43 | Material and labour for 6 mm thick external teak wood lipping fixed to18/19mm thick block board or veneered particle board fixed with nails complete all as specified and directed. |
| 44 | Supply and fix 100mm D type stainless steel handles, fixed to cupboard draws etc complete all as specified and directed. |
| 45 | Supply and fix 40mm width of flaps (when open) Continuous (piano) hinges, stainless steel, bright finish or electrogalvanised fixed to cupboard door etc complete all as specified and directed. |
| 46 | Supply and fixing repair 19/20mm dia anodised aluminium alloy curtain rod or similar articles complete all as specified and as directed by Engineer in Charge |
| 47 | Supply and fix anodised aluminium alloy type brackets suitable for 19/20 mm dia curtain rod or similar articles complete all as specified and as directed by Engineer in Charge |
| 48 | Material and labour for preparation of new wooden surfaces over 10cm width or girth and applying two coats of synthetic enamel spray paint over one coat of pink primer complete all as specified and directed. |
| 49 | Material and labour for applying one coat of Acrylic washable distemper on old decorated surfaces of wall including preparation of old surfaces etc complete all as specified and as directed by Engr-in-Charge. |
| 50 | Material and labour for coloured glazed ceramic tiles (Ist quality) of size 300 x 200 x 6 to 7 mm / 300 x 450 x 6 to 7 mm thick on vertical surfaces such as skirting, dado and rises to steps etc. including 10mm thick cement plaster in CM 1:3 set and set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles complete all as specified and directed. |
| 51 | Material and labour for Rendering 15 mm thick on brick or concrete surfaces in cement mortar (1:6) finished even and smooth without using extra cement, complete all as specified. |
| 52 | Material and labour for preparing newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of Primer including finishing of surface with 3mm thick wall care putty etc complete all as specified and directed |
| 53 | Material and labour for providing and injecting emulsion for post construction antitermite treatment at points of contacts of wood with masonry / concrete surfaces using chemical emulsion mixed with oil or kerosene at the rate of 0.5 litres per hole including drilling 6mm dia holes at a downward angle of 45 degree at 150mm centre to centre and plugging the holes with cement mortar (1:2) etc to match with existing surface complete all as specified and directed. |
| 54 | Material and labour for providing and injecting emulsion for post construction antitermite treatment for soil under existing floors using chemical emulsion at the rate of one litre per hole, 300mm apart including drilling 12 mm dia holes and plugging the holes with cement mortar (1:2) etc to match with existing floors complete all as specified and directed. |
| 55 | Resecuring or easing and adjusting without taking down shutter from the frame & re-fixing builders hardware as required including removal of unserviceable screws etc. not exceeding 1 Sqm each, complete all as specified and directed by Engineer - in -Charge. |
| 56 | Resecuring or easing and adjusting without taking down shutter from the frame & re-fixing builders hardware as required including removal of unserviceable screws etc. area exc 1 Sqm but not exc 2 Sqm each, complete all as specified and directed by Engineer - in -Charge. |
| 57 | Supply and fix in repairs extruded aluminium alloy butt hinges 75mm size with galvanised mild steel hinge pin type C-22 complete all as specified and directed |
| 58 | Supply and fix in repairs extruded aluminium alloy butt hinges 100mm size with galvanised mild steel hinge pin type C-21 complete all as specified and directed |
| 59 | Supply and fix in repairs Aluminium alloy, anodised, sliding door bolt 300 mm long with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed. |
| 60 | Supply and fix in repairs Aluminium powder coated barrel tower bolts of extruded section 150mm long all as specified and directed. |
| 61 | Supply and fix in repairs double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty all as specified and directed. |
| 62 | Supply and fix in repairs Mortise locks, vertical type, size 100mm 4 levers mild steel chromium plated with keys in duplicate all as specified and directed |
| 63 | Supply and fix in repair 12 mm thick particle board medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed in wooden / Aluminium frame with necessary fittings rubber packing & aluminium beading etc. complete all as specified. |
| 64 | Material and labour for preparation of old painted wooden surfaces of any description not otherwise described over 10cm width or girth and applying one coat of synthetic enamel paint including necessary scaffolding and safety measures as required etc complete all as specified and as directed by Engr-in-Charge. |
| 65 | Material and labour for 12mm thick Plywood, grade BWR, type BB, fixed with screws to timber frame work etc complete all as specified and directed Please Enable Macros to View BoQ information |
