|
| 1 | Taking down chowkhats with shutter (without taking of shutter from the frame) exc.1.50 Sqm but n.exc 4.00 Sqm each and removing from site complete all as specified and directed. |
| 2 | Taking down chowkhats with shutter (without taking of shutter from the frame) n.exc.1.50 Sqm each and removing from site complete all as specified and directed. |
| 3 | Taking down shutter of any description exc.1.00 sqm. but n.exc. 2.00 sqm each complete all as specified and directed. |
| 4 | Taking down shutter of any description n.exc. 1.00 sqm each complete all as specified and directed. |
| 5 | Material and labour for 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed. |
| 6 | Supply and fix solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain coloured PVC sheet reinforced with mild steel square tube as per specification and drawing given on MES schedule Part-II (2020) complete all as specified and directed. |
| 7 | Supply and fix factory made PVC door shutters 30mm thick (style) consisting of frame made of MS tube for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20 mm width Stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the frame at site as per specification and drawing given on MES schedule Part-II (2020) complete all as specified and directed. |
| 8 | All as per item No 7.00 above but wire gauzed shutter, the wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly and -ditto-. |
| 9 | Material and labour for 2nd class HW plain fillets, square, rectangular or trangular in section, wrought, chamfered or rounded screwed with nails or beads sectional area exc 13 & n.exc 25 Sqcm. complete all as specified and directed. |
| 10 | Supply and fix 2nd class hard wood 35 mm thick plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile shall be as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 11 | Supply and fix 30mm thick flush shutters, solid core construction, with block board core and both faces covered with decorative face veneer with lipping/frame to match the shade complete all as specified and directed. |
| 12 | Supply and fix steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and directed. |
| 13 | Supply and fix steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and directed. |
| 14 | Supply and fix steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed. |
| 15 | Supply and fix framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 16 | Supply and fix Powder coated (any colour) aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and directed. |
| 17 | Supply and fix Powder coated (any colour) aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and directed. |
| 18 | Supply and fix in repair door closer hydraulically regulated aluminium (extruded section body), designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed. |
| 19 | Suplly and fix stainless steel 100mm size butt hinges, medium weight complete all as specified and directed. |
| 20 | Suplly and fix 100mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 21 | Supply and fix 75mm size stainless steel butt hinges medium weight complete all as specified and as directed. |
| 22 | Suplly and fix 75mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 23 | Suplly and fix 150 mm long aluminum anodised barrel tower bolts cast type complete all as specified and directed. |
| 24 | Suplly and fix in repair 150 mm long aluminum anodised barrel tower bolts cast type complete all as specified and directed. |
| 25 | Supply and fix 150mm long alluminium handles, cast type, anodized complete all as specified and directed. |
| 26 | Supply and fix in repair 150mm long alluminium handles, cast type, anodized complete all as specified and directed. |
| 27 | Supply and fix 300mm long aluminium alloy, anodised, sliding door bolts with hasps, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed. |
| 28 | Supply and fix in repair 300mm long aluminium alloy, anodised, sliding door bolts with hasps, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed. |
| 29 | Supply and fix in repair mild steel 300mm long ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed. |
| 30 | Supply and fix 4 mm thick sheet glass ordinary quality and glazing with oil putty / wooden bead/ aluminium/ rubber bead in square exc 0.5 Sqm in each pane including hacking out old broken glass complete all as specified and directed. |
| 31 | Supply and fix stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or nut bolt complete all as specified and directed. |
| 32 | Supply and fix in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or nut bolt complete all as specified and directed. |
| 33 | Resecuring or easing and adjusting without taking down shutters for easy closing / opening, end tightening of butt hinges in position, adjustement of butt hinges in position, adjustement of existing iron mongry, size of shutter n. exc 1 sqm each complete all as specified and directed. |
| 34 | Taking down shutters exc 1.00 Sqm but not exc 2.00 Sqm from the frame carefully and refixed in same opening after necessary repair including easing, welding or any require item such as stay handle etc. and making good to existing surface complete all as specified and directed. |
| 35 | Repair / adjusting aluminium door for holding in position to shutters in frame including replacing of old damaged adjusting bolts,cleats, rubber gas- kits, screws and aluminium sections less than 1kg for each shutters and making proper functionable to aluminium doors / windows complete all as specified and directed. |
| 36 | Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing tiles and rubbish off the premises complete all as specified and directed. |
| 37 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided including removal of rubbish from the site complete all as specified and directed. |
| 38 | Material and labour for 25mm thick PCC (1:2:4) type B-0 (using 12.50mm graded stone aggregate) as in levelling course for laying floor finishes complete all as specified and directed. |
| 39 | Material and labour for vitrified ceramic tiles (premium quality) 8 to 10mm thick, light shade as approved, polished area of each tiles n. exc. 0.36 Sqm (square/ rectangular) in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed. |
| 40 | Material and labour for ceramic, non skid, coloured tiles (premium quality) 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11sqm but not exc. 0.18sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed. |
| 41 | Material and labour for ceramic, non skid, coloured tiles (premium quality) 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.18sqm but not exc. 0.36sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed. |
| 42 | Material and labour for glazed ceramic tiles of size 300x450x7 mm or 300x200x7mm (premium quality) coloured in vertical surfaces such as riser of steps, skirting, dado and pillar set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick cement plaster in cement mortar (1:4) complete all as specified and directed. |
| 43 | Material and labour for 75mm thick PCC (1:4:8) type D-2 (using 40 mm graded stone aggregate) as in sub base or base course of floor etc complete all as specified and directed. |
| 44 | Material and labour for joint free anti skid (good grip series) outdoor pavement coloured tiles of size 300 x 300 x 10mm thick as in floor, path etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over and including 20mm thick screed bed in cement mortar (1:6) complete all as specified and directed. |
| 45 | Dismanting of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed. |
| 46 | Supply and fix 0.50mm thick pre-painted galvalume aluminium Zinc coating GI based corrugated / semi corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as per manufacturer instruction complete all as specified and directed. |
| 47 | Supply and fix 0.50mm thick pre-painted galvalume aluminium Zinc coating GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall/ ridges/ valley gutter fixed with self tapping screws as per manufacturer instruction complete all as specified and directed. |
| 48 | Supply and fix rolled mild steel in joist, channel, angle, or tee sections, fixed independently, without connecting plates, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) of Fe 410 -W (Gde-E- 250) quality-A complete all as specified and directed. |
| 49 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed. |
| 50 | Dismantling of wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 51 | Material and labour for mild steel TMT bars 10mm dia and over, cut to length bent to shape required, including cranking bending spirally for hooping for columns , hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips complete all as specified and directed. |
| 52 | Material and labour for RCC (1:1.5:3) (nominal mix) type A1 (using 20mm graded stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed. |
| 53 | Material and labour for form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or slopping) with rough finished flat surfaces of concrete complete all as specified and directed. |
| 54 | Material and labour for structural steel work in plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk)forming holes, with riveted, bolted or welded attachment conforming to Fe-290 (Gde-E- 165 ) complete all as specified and directed. |
| 55 | Material and labour for Mild steel screw bolts of 11 to 15mm dia of neck (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, length of bolt n exc 5cm long complete all as specified and directed. |
| 56 | Material and labour for cutting holes into or through brick wall built in cement mortar of superficial area not exc 150 sqcm and making good in CM (1:3) or cement concrete (1:2:4) type B-1 as required complete all as specified and directed. |
| 57 | Material and labour for welding in repairs n. exc 2.5cm in length, thickness of metal to be welded exc 6mm but n. exc 9mm complete all as specified and directed. |
| 58 | Material and labour for repairs to uneven surface of concrete and reinforcement from drop of fins, facias, chajjas using necessary scaffolding and making good disturbed portion with rendering cement plaster, 10mm thick in cement mortar (1:3) and finished even and smooth without using extra cement complete all as specified and directed. |
| 59 | Supply and fix false ceiling with powder coated exposed GI grid suspension system (E-grid T-2430 or equivalent load carrying capacity- 12.50 Kg/sqm with mid span deflection n. exc. 1/360 span with hanger spacing of 1200mm c/c) consisting of main runner 3600mm long of size- 24x38mm x 0.25mm thick, cross tee of section size- 24x27mm x 0.25mm thick 1200mm/600mm long and wall angle of section size 22x22mm x 0.4mm thick. The wall angle shall be fixed on PVC dash fasteners on the perimeter of the wall by steel screws with distance 300mm c/c. The main runners to be placed @ 1200mm, The cross tee 1200mm will be inserted in pre-cut slots of main runner at a regular interval of 600mm to form a modular grid of 1200mmx600mm. Additional cross tee of 600mm shall be placed perpendicular to the cross tee1200mm long to finally form a grid of 600mm x 600mm shall be supported by 4mm dia G.I. wire from perlins/soffits. 6mm thick high pressure steam cured non asbestos fibre cement designer ceiling board (density> 1200kg/cum, modules of rupture (M.O.R)-15.85 Mpa, thermal conductivity (k)-0.0872 W/mk) of size 595mm x 595mm, confirming to IS 14862 & type B catagory III of ISO 8336-1993, (Reaction of fire-A2 -s1-d0) tested as per EN 13501 Part-I & BS-476 part-4, 5, 6 & 7, should be placed in the grid module to form a false ceiling complete all as specified and directed.Make: Armstrong/ Saint Gobain/ Lafarge/ Everest. |
| 60 | Supply and fix in repair vitreous china wash hand basin, white, flat back, size 550x400mm including 32 mm bore brass waste fittings chromium plated including cutting for and pinning in ends of brackets and 32mm dia PVC waste pipe 800mm long including 15mm bore fancy type long body pillar tap cast copper alloy with capstan heads, chromium plated, screwed down, high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed. |
| 61 | Supply and fix in repair vitreous china white squatting pan (Orissa’ pattern) size 580 x 440mm with integral foot rests including ‘P’ or ‘S’ trap, (excluding flushing cistern and flush pipe), including provn of cement concrete bedding (1:5:10) type E1 (using 20mm graded stone aggregate) complete all as specified and directed. |
| 62 | Supply and fix in repair vitreous china wash down water closet pan (pedestal Pattern) white (excluding fixing bolts flusing cistern and flush pipe) including connection to drain (or out going pipe) and to flush pipe anti syphonage pipe incl cast iron P or S trap fixed on floor including plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 63 | Supply and fix in repair 10 litre PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets including flushing pipe complete all as specified and directed. |
| 64 | Supply, hoist and fix 500 litre capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of old unseviceable existing tank complete all as specified and directed. |
| 65 | Supply, hoist and fix 1000 litre capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of old unseviceable existing tank complete all as specified and directed. |
| 66 | Supply and fix 20mm bore steel tubes medium grade galvanised, with all fitting and fixed complete to walls, ceilings and roof or laid in floors including taking up or down existing steel tubing and connections complete all as specified and directed. |
| 67 | Supply and fix 15mm bore steel tubes medium grade galvanised, with all fitting and fixed complete to walls, ceilings and roof or laid in floors including taking up or down existing steel tubing and connections complete all as specified and directed. |
| 68 | Taking down of 110/75 mm bore PVC (SWR) pipes including all fittings fixed in any position complete all as specified and directed. |
| 69 | Supply and fix 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed. |
| 70 | Supply and fix 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floor complete all as specified and directed. |
| 71 | Supply and fix 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and directed. |
| 72 | Supply and fix 75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall complete all as specified and directed. |
| 73 | Supply and fix 110mm bore PVC (SWR) junction single (single T) equal or unequal with access door complete all as specified and directed. |
| 74 | Supply and fix 110 mm bore PVC (SWR) bends of any radius with access door complete all as speified and directed. |
| 75 | Supply and fix 75 mm bore PVC (SWR) bends of any radius with access door complete all as speified and directed. |
| 76 | Supply and fix 75mm bore PVC (SWR) junction single (single T) equal or unequal with access door complete all as specified and directed. |
| 77 | Supply and fix in repair 20mm dia ball valve high pressure high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gm) complete all as specified and directed. |
| 78 | Supply and fix in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and direted. |
| 79 | Supply and fix in repair 600x450mm bevelled edge mirror of selected quality glass 5 mm thick, mounted on 6 mm thick commercial ply wood, aluminium frame and fixed to wooden plugs with chromium plated brass screw and cup washers complete all as specified and directed. |
| 80 | Taking down cement plaster of any description built in cement mortar on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc. and removing debrish from site complete all as specified and directed. |
| 81 | Demolition of brick work or stone boulder masonry, built in cement mortar including all quoins, arches, pillars etc. including removing of unserviceable material from site complete all as specified and directed. |
| 82 | Material and labour for brick work with sub class `B` bricks, old size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed. |
| 83 | Materials and labour for half brick thick brick work with sub class `B` bricks, old size, straight or curved on plan to any radius built in cement mortar (1:4) complete all as specified and directed. |
| 84 | Material and labour for 15mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar (1:4) and finish the surfaces even and smooth without using extra cement as in wall complete all as specified and directed. |
| 85 | Material and labour for 10mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar (1:6) and finish the surfaces even and smooth without using extra cement as in wall complete all as specified and directed. |
| 86 | Material and labour for 5mm thick rendering on concrete surfaces in cement mortar (1:3) and finish the surfaces even and smooth without using extra cement as in ceiling complete all as specified and directed. |
| 87 | Material and labour for preparation of new plastered surfaces of walls and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming one coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed. |
| 88 | Material and labour for preparation of new plastered surfaces of walls and applying two coats of acrylic washable distemper over a coat of alkali resistance primer complete all as specified and directed. |
| 89 | Material and labour for preparation of new plastered surfaces of ceiling and applying three coats of white wash complete all as specified and directed. |
| 90 | Materials and labour for complete removal of existing treatment on walls and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming one coat of exterior primer applied @ 0.90 litre/ 10 sqm including preperation of surfaces complete all as specified and directed. |
| 91 | Material and labour for preparation of old decorated surfaces of wall and applying one coat of white wash complete all as specified and directed. |
| 92 | Material and labour for preparation of old decorated surfaces of walls and applying one coat of acrylic washable distemper complete all as specified and directed. |
| 93 | Material and labour for preparation of old decorated surfaces of ceiling and applying one coat of white wash complete all as specified and directed. |
| 94 | Supply and fix in repair floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, overall length of cover plate 140mm long, fixed in floor complete all as specified and directed. |
| 95 | Material and labour for complete removal of existing treatment on walls and applying two coats of acrylic washable distemper over a coat of alkali resistance primer over 1mm thick wall care putty including preperation of surface complete all as specified and directed. |
| 96 | Supply and fix in repair stainless steel 25mm dia curtain rod, fancy type with side and end holders and MS brackets fixed in brick /concrete wall with screws complete all as specified and directed. |
| 97 | Material and labour for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 98 | Material and labour for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 99 | Suplly and fix in repair 100 mm long Mortice lock with two levers (vertical type), brass body complete all as specified and directed. |
| 100 | Supply and fix 18/19mm thick block boards, grade 2 quality, interior grade, commercial type, fixed with screws to timber framework with decorative face veneer on both faces complete all as specified and directed. |
| 101 | Supply and fix 5.5 mm thick sheet glass ordinary quality and glazing with oil putty / rubber packing in square exc 0.5 Sqm in each pane complete all as specified and directed. |
| 102 | Supply and fix in repair 32 mm bore PVC corrugated waste pipe 800mm long complete all as specified and directed. |
| 103 | Supply and fix in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 104 | Supply and fix in repair 0.85 mm thick stainless steel plate rack of size 914mm X 914mmx 254mm of stainless steel grade 204 as approved complete all as specified and directed. |
| 105 | Supply and fix in repair kitchen sinks with drainage board of steel grade-304 made of stainless steel 1mm thick with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 106 | Supply and fix in repair 15mm bore fancy type sink tap chromium plated brass, round headed single liver with quarter turn option with areator, swan neck type wall mounted with extruded brass made spindle and housing with wall flange, screwed down high pressure with long screwed shanks, screwed for iron pipe complete all as specified and directed. |
| 107 | Supply and fix in repair 32mm dia waste coupling, fittings, brass, chromium plated for glazed ware sinks, basins, urinals etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement complete all as specified and directed. |
| 108 | Supply and fix in repair soap dish, brass chromium plated, fancy type, fixed to plugs with chromium plated fixed with brass screws complete all as specified and directed. |
| 109 | Supply and fix in repair 300mm dia corner glass shelf with brass brackets fixed with screws complete all as specified and directed. |
| 110 | Supply and fix in repair 15 mm bore CP fancy type stop valves, cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both,ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 111 | Supply and fix in repair 15 mm bore bib taps fancy type cast copper alloy chromium plated with crutch or handles screwed down, screwed for iron pipes as fixed complete all as specified and directed. |
| 112 | Supply and fix in repair 15mm bore angle cock fancy type cast copper alloy chromium plated with crutch or handles screwed down, screwed for iron pipes as fixed complete all as specified and directed. |
| 113 | Supply and fix in repair 15 mm bore PVC connection pipe 600mm long with PTMT nuts at both ends complete all as specified and directed. |
| 114 | Supply and fix in repair 15mm bore pillar tap cast copper alloy with capstan heads, chromium plated, screwed down, high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed. |
| 115 | Supply and fix in repair 100mm dia stainless steel grating doom with hole fixed with cement complete all as specified and directed. |
| 116 | Supply and fix in repair single piece water closet vitreous china wash down water closet pan (pedestal pattern) of size 360x730x740mm with S trap of size 300mm with PP soft close seat cover, hinges, dual flush cistern fitting including all required fixing accessories and accessories set complete of solo series of code SLS-WHT-6851S300PP of make JAQUAR& COMPANY PVT LTD or equivalent brand of make mentioned in tender documents complete all as specified and directed. |
| 117 | Supply and fix in repair counter top oval shaped vitreous china wash hand basin, white, of size 550mmx400mm fixed to granite / marble top slab, including cutting for and pinning in and 32 mm bore cast copper alloy chromium plated waste fittings and 32mm dia PVC waste pipe 800mm long complete all as specified and directed. |
| 118 | Supply and fix in repair 15mm bore brass CP basin mixer for mixing hot and cold water screwed down for iron pipe complete all as specified and directed. |
| 119 | Material and labour for preparation of new wooden surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 120 | Material and labour for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed. |
| 121 | Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided including reinforcement cut as required to facilitate demolition and removing debries from site of work completeall as specified and directed. |
| 122 | Supply and fix in repair brass chromium plated shower rose 125 mm size with or without swivel joint complete all as specified and directed. |
| 123 | Supply and fix in repair 15mm bore fancy type pillar tap long body (swan neck type) cast copper alloy with capstan heads, chromium plated, screwed down, high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed. |
| 124 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed. |
| 125 | Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, including marking of date of cleaning by stencil, tank lid should be secured with 2mm GI wire etc of capacity exc 500 litres and n. exc 1000 litres complete all as specified and directed. |
| 126 | Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, including marking of date of cleaning by stencil, tank lid should be secured with 2mm GI wire etc of capacity exc 250 litres and n. exc 500 litres complete all as specified and directed. |
| 127 | Supply and fix in repair 140mm long floor door stopper of brass body and tongue with hard drawn steel spring, fixed to door complete all as specified and directed. |
| 128 | Supply and fix in repair 15mm bore brass wall mixer telephonic with \\"L\\" bend (provision for overhead shower / hand shower) without popup waste system with 450 mm long copper pipe complete all as specified and directed. |
| 129 | Supply and fix solid PVC wall lining consisting of 5 mm thick wood grain printed colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed. |
| 130 | Supply and fix 5mm thick PVC sheet fillet of width 35 mm for wall panelling inclusive of fixing on to wall to make PVC frame complete all as specified and directed. |
| 131 | Supply and fix in repair 20mm dia ball valve high pressure high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gm) complete all as specified and directed. Please Enable Macros to View BoQ information |
| 132 | Supply and fix in repair 20mm dia ball valve high pressure high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gm) complete all as specified and directed. Please Enable Macros to View BoQ information |
