|
| 1 | BOQ BoQ_Ver3.0 Item Rate Normal INR Only INR Select, Excess (+), Less (-) Less (-) File No 8119/E8 Tender Inviting Authority: GARRISON ENGINEER GOLCONDA Name of Work: REPAIRS / MAINTENANCE OF COMPOUND WALL, CHAIN LINK FENCING, GATES, HARD STANDING AND PAINTING /PLASTERING OF BOUNDARY WALLS, COMPOUND WALLS ,GATES , BOUNDARY PILLER AND OTHER MISC WORKS IN IB LINES, I/S MKD & O/S MKD OF AGE B/R-I UNDER GE GOLCONDA Bidder Name : PRICE SCHEDULE(This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only ) NUMBER # TEXT # TEXT # NUMBER # TEXT # NUMBER NUMBER TEXT TEXT # NUMBER # TEXT# TEXT # NUMBER # NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER NUMBER TEXT TEXT NUMBER NUMBER NUMBER # NUMBER # TEXT TEXT NUMBER # NUMBER # DATE NUMBER # NUMBER # TEXT # Sl.No. Description of work Item Code / Make No or Quantity Units Estimated Rate Addition / Deduction Addition / Deduction Values Currency Convertion against each Item Quoted Currency in INR / Other Currency RATE In Figures To be entered by the Bidder including all TaxesRs. P Excise Duty VAT Freight Charges ( Unloading & Stacking) Any Other Taxes/Duties/Levies Other Taxes 2 IIIrd Party i.e DGS&D / RITES etc Inspection Charges @0.34%+Service Tax Less for Cenvat Credit,if any respect of Supplies Under full Excise Duty Category TOTAL AMOUNT TOTAL AMOUNT With Taxes TOTAL AMOUNT In Words Represent (%) Percentage having Above/ Below ( + or - denomination) the Lump sum pre price inserted by MES |
| 2 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc and remove all the debris from site and rubbish off the premises complete all as specified and directed. |
| 3 | M&L for brick work with fly ash bricks, straight or curved on plan to any radius, built in cement mortar 1:4 using old size bricks complete all as specified and directed. |
| 4 | Taking down cement plaster on wall of any description including racking out joints for key, scrubbing with water etc. complete all as specified and directed. |
| 5 | M & L for rendering 15mm thick in two layers (10mm+5mm) cement mortar 1:4 (1 cement 4 river sand) on concrete or brick wall surfaces, finished even and smooth without using extra cement, complete all as specified and directed. |
| 6 | M&L for preparing new plastered surfaces of walls and applying Two coats of cement based paint complete all as specified and directed. |
| 7 | M&L for 100mm thick Cement concrete type B-1, 1:2:4 (Mix with 40, 20mm graded aggregate and fine aggregate Natural river sand) finishing cement concrete surface even and smooth without using extra cement and spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green etc complete all as specified and as directed |
| 8 | Dismantling posts or struts (wood, steel or R.C.C.) any section, including taking out Posts embedded in Concrete, brick work, masonry, etc. embedded portion and making good disturbed ground complete all as specified and as directed |
| 9 | Dismantling fencing wire mesh, any type or any description complete all as specified and as directed |
| 10 | Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm getting out soft/loose soil complete all as specified and as directed |
| 11 | M&L for PCC 1:4:8 Type D2 using 40mm graded stone aggregate Cement concrete in foundations, filling and mass concrete complete all as specified and as directed |
| 12 | M&L for posts and struts in fencing including cutting tops to shape as directed, drilling holes, matching for wire etc, flat iron fillets (for securing wire mesh etc) including all necessary drilling, bolting or riveting etc an similar work complete all as specified and as directed |
| 13 | M&L for Plain cement concrete (1:3:6) type C1 (using 20 mm graded stone aggregate) as in coping complete all as specified and directed. |
| 14 | Supply and fixing 5.60mm (over all dia) PVC coated GI chain link fencing having 2.8mm dia GI wire and 1.4mm thick PVC coating and size of mesh 60mm X 60mm including line bar 8mm dia round 4 Nos full length of straights, rails stranding bolts etc.complete all as specified and directed. |
| 15 | S&F MS bolts, screw (machine made( with hexagonal or spare head one end and screwed the other, or screwed bolts ends, each screwed end to be fitted with washer and one hexagonal or square meter 5 cm long complete all as specified and as directed |
| 16 | M&L for two coats of synthetic enamel paint over a coat of red oxide primer including preparation of any description over 10cm width or girth complete all as specified and as directed |
| 17 | S & F for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc. complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing, Fe 410-W (Gde-E-250) quality-A,etc complete all as specified and as directed. |
| 18 | S & F for Mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws,clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required, Thickness of sheet in 1.60 mm, etc complete all as specified and as directed. |
| 19 | Dismantling Stone slabs/ tiles, floors, paths, aprons etc any description or thickness and S&F for 80mm thick M-40 grade factory made precast concrete interlocking paver block in grey cement with pigments and of approved size and shape and conforming to IS 15658-2006, laid over 50mm thick sand bedding layer laid to true line, level watered and mechanically compacted etc complete all as specified and as directed.. |
| 20 | Dismantling chequered floor tiling including cement mortar bedding and M&L chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick with grey cement and pigment, machine pressed, set jointed and pointed in neat cement slurry in floors id over 20 mm thick screed bedding layer in CM 1:6 complete all as specified and directed. |
| 21 | Demolition of cement concrete (Unreinforced) in ground floors and pavings n exc 15cm thickness (Below or above Ground level) complete all as specified and as directed.. |
| 22 | Material and labour for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete all as specified and as directed. |
| 23 | M&L for PCC type E2 1:5:10 (using 40mm graded stone aggregate) as in foundations, filling and mass Concrete complete all as specified and directed. |
| 24 | Material and labour for preparation of new concrete surfaces of any description over 10cm girth or width, not otherwise described and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and as directed. Total in Figures 0.0 0.0 INR Zero Only Quoted Rate in Figures Select 0.0 0.0 Zero Only Quoted Rate in Words INR Zero Only Please Enable Macros to View BoQ information |
