|
| 1 | Resecuring or easing or adjusting shutters without taking down from the frame of any description not exc 1 Sqm each all as specified and directed. |
| 2 | Resecuring or easing or adjusting shutters without taking down from the frame of any description exc 1 Sqm but n exc 2 Sqm each all as specified and directed. |
| 3 | Refixing shutter of any description exc 1 Sqm but n exc 2 sqm each in the same opening (includes taking down, easing and adjusting) all as specified and directed . |
| 4 | Refixing shutter of any description exc 1 Sqm but n exc 2 sqm each in the same opening (includes taking down, easing and adjusting) all as specified and directed . |
| 5 | S&F in repairs prelaminated particle board 9mm th, interior grade, prelaminated both sides with decorative choice lamination , fixed with screws to timber frame work for cupboard shutter, shelf, fixed inside aluminium partition etc complete all as specified. |
| 6 | S&F in repairs prelaminated particle board 18/19 mm th, interior grade, prelaminated both sides with decorative choice lamination , fixed with screws to timber frame work for cupboard shutter, shelf etc complete all as specified. |
| 7 | S&F in repairs prelaminated particle board 25 mm th, interior grade, prelaminated both sides with decorative choice lamination , fixed with screws to timber frame work for cupboard shutter, shelf etc complete all as specified. |
| 8 | S&F in repairs 100 mm Hasp and stable, mild steel, wire type stove enamelled black, including bolt to hinge plate and fixed with screws all as specified and directed. |
| 9 | S&F in repairs 100 mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed . |
| 10 | S&F in repairs 150 mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed . |
| 11 | S&F in repairs 100 mm long extruded aluminium alloy handle fabricated type anodised complete all as specified and directed . |
| 12 | S&F in repairs 150 mm long extruded aluminium alloy handle fabricated type anodised complete all as specified and directed . |
| 13 | S&F in repairs 300 mm aluminium alloy anodized sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section etc complete all as specified and directed. |
| 14 | S&F in repairs mild steel 300mm ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and directed . |
| 15 | S&F in repairs aluminium mortice lock 4 lever vertical type 75 mm size for aluminium door shutter complete all as specified and directed . |
| 16 | S&F in repairs for double action floor door spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty all as specified and directed. |
| 17 | S&F in repairs floor door stopper with cover plate of 140mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, mounted on doors all as specified and directed. |
| 18 | S&F in repairs curtain rails 25mm, mild steel, chromium plated with fixing brackets,stops, rollers etc. all as specified and directed. |
| 19 | S&F in repairs Stainless steel SS grade 304, curtain rod 25 mm dia 1.20mm thick with brackets of SS grade 304 all as specified and directed. |
| 20 | S&F in repairs galvanised mild steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks , beading also with stainless steel wire staples for fixing on wooden/ steel windows/ventilators and doors complete all as specified and directed . |
| 21 | Hacking out old broken glass, cleaning rebates in preparation for reglazing carefully, taking out beads, removing any serviceable glass to store and rubbish off the premises complete all as specified and directed. |
| 22 | S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty or fixed with beading, area not exc 0.5 Sqm in each pane complete all as specified and directed . |
| 23 | S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty or fixed with beading, area not exc 0.5 Sqm in each pane complete all as specified and directed . |
| 24 | S&F 4.8 mm thick sheet glass ordinary quality and glazing with oil putty or fixed with beading, area exc 0.5 Sqm in each pane complete all as specified and directed . |
| 25 | S&F 12mm Toughned glass as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes required complete all as specified and directed . |
| 26 | S&F solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturers |
| 27 | M&L for applying one coat of synthetic enamel paint including preparation of wood or wood based old surface area exc 10 cm width or girth complete all as specified and directed. |
| 28 | M&L preparation of old steel surface exc 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 29 | Demolition of Brick work or Stone boulder masonary built in cement mortar complete all as specified and directed |
| 30 | M&L in repairs for brick work with fly ash bricks straight or curved on plan exc 6m in radius but built in 1:6 cement mortar complete all as specified and as directed. |
| 31 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc. Including raking out joints, hacking for key, scrubbing down with water, etc. |
| 32 | M&L for rendering 10 mm thick in CM 1:6 on faces of stone, brickwork or concrete surfaces (internal), finished even and smooth without using extra cement etc complete all as specified and as directed. |
| 33 | M&L for preparation of new/old plastered or unplastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed. |
| 34 | M&L for preparation of new/old plastered or unplastered surfaces of wall and applying two coats of cement base paint over a coat of white cement primer complete all as specified and as directed. |
| 35 | M&L for preparation of new/old plastered or unplastered surfaces of walls and applying two coats of white wash complete all as specified and directed. |
| 36 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) of any description not exc 1.50 Sqm each all as specified and directed. |
| 37 | Taking down chowkats or frames with shutters (without taking off shutters from the frame) of any description exc 1.50 Sqm but n.exc 4 Sqm each all as specified and directed . |
| 38 | Taking down shutter of any description not exc 1 Sqm each all as specified and directed. |
| 39 | Taking down shutter of any description exc 1 Sqm and n.exc 2 sqm each all as specified and directed. |
| 40 | S&F Structural Steel work conforming to Fe-290 Gde E-165 as in framed structure for doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, incl 1 mm thick mild steel, plain sheet , cut to size,drilled, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging, sliding bolts and fixing complete all as specified and as directed. |
| 41 | S&F IInd class hard wood plain solid straight chowkats and frames wrought, framed, rebated on the solid rounded or chamfered put together with glue pinned at joints all as specified and directed . |
| 42 | S&F 35 mm thick II class hard wood (door) plain framed factory made panelled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm thick veneered particle board with commercial veneering on the both faces. The size of rail as per IS: 1003 (Pt I) kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 43 | S&F 35mm thick factory made flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides |
| 44 | S&F 35 mm thick factory made glazed and skeleton shutter of 2nd class HW, open rebated and prepared to receive glass/gauze, divided into squares with plain chamfered mitred and rebated sash bar as in doors, sizes of members of shutters as specified in SSR Pt-I, section 8, clause 8.24(a) supplied and fitted to chowkats complete all as specified & directed. |
| 45 | S&F 30 mm thick factory made glazed skeleton shutter of 2nd class HW, open rebated and prepared to receive glass/gauze, divided into squares with plain chamfered mitred and rebated sash bar as in window/ventilator, sizes of members of shutters as specified in SSR Pt-I, section 8, clause 8.24(b) supplied and fitted to chowkats complete all as specified & directed . |
| 46 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube complete all as specified & directed. |
| 47 | S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing |
| 48 | Cutting holes in brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar for inserting hold fasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 Type B1 complete, depth of embedded portion of hold fasts not exc half brick all as specified & directed. |
| 49 | S&F Bands, straps, supports or stays for rain water, ventilating pipes, including bolts, if required; hooks (stay) for large gates, hook & pintle hinges; large hasp & staples; hand made sliding bolts; clamps; hold fasts and similar articles confirming to Fe 290, Gde E 165 complete all as specified & directed. |
| 50 | S&F 100mm long cold rolled, mild steel butt hinges medium weight complete all as specified and directed. |
| 51 | S&F 100mm butt hinges, aluminium anodised of extruded section complete all as specified and as directed |
| 52 | S&F 150 mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed . |
| 53 | S&F 150 mm long extruded aluminium alloy handle fabricated type anodised complete all as specified and directed . |
| 54 | S&F 100 mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed . |
| 55 | S&F 100 mm long extruded aluminium alloy handle fabricated type anodised complete all as specified and directed . |
| 56 | S&F 300 mm aluminium alloy anodized sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet cast or extruded section etc complete all as specified and directed. |
| 57 | M&L for applying two coats of synthetic enamel paint over one coat of pink primer including preparation of wood or wood based new surface area exc 10 cm width or girth complete all as specified and directed. |
| 58 | S&F galvanised mild steel steel wire cloth 0.63 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or beading complete all as specified and directed . |
| 59 | S&F steel windows Z section with side hung shutters including projecting type/box type hinges with steel handle and steel peg stay, complete with glazing bars, guard bars,dovetailed or welded complete all as specified and directed. |
| 60 | S&F for Steel ventilator Z section with top hung shutter including hinges, steel peg stay, complete all as specified and directed. |
| 61 | S&F in repairs mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 |
| 62 | M&L preparation of new steel surface exc 10cm width or girth and applying two coats of synthetic enamel paints over a coat of red oxide complete all as specified and directed. |
| 63 | M&L,Anodised aluminum frame for doors,window,ventilators with one or more rebates including joining cleat for fixinfg etc,complete all as specified and directed |
| 64 | M&L for aluminium powder coated door shutter, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazinfg clips, rubber neoprene packing, handles 2 nos in each door, hinges, anodised aluminium snap beading screws etc. compltete all as specified and directed Please Enable Macros to View BoQ information |
| 65 | M&L for aluminium powder coated door shutter, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazinfg clips, rubber neoprene packing, handles 2 nos in each door, hinges, anodised aluminium snap beading screws etc. compltete all as specified and directed Please Enable Macros to View BoQ information |
