Tender For Repair/ Maintenance Of Certain Works Like Flooring Joineries Etc, Periodical Services To Otm And Otm Accn, Repair/ Cleaning Of Sewage Lines, Soak Wells, Septic Tanks And Repair/ Maintenance And Rewiring Of Internal Wiring Mcb, Db Etc At Ne, Mohanbari-Assam

TDR : 55737676

Tender Notice
BOQ

15 Days Left

Mohanbari , Assam

Tender Brief : Tender For Repair/ Maintenance Of Certain Works Like Flooring Joineries Etc, Periodical Services To Otm And Otm Accn, Repair/ Cleaning Of Sewage Lines, Soak Wells, Septic Tanks And Repair/ Maintenance And Rewiring Of Internal Wiring Mcb, Db Etc At Ne

Document Fees
₹ 500 /-

EMD
₹ 89000.0 /-

Tender Value
₹ 44.50 Lakhs /-

Submission Date
18-06-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Taking down chowkat or frame with shutter (without taking off shutter from the frame) exc 1.5 sqm and n.exc 4 Sqm each, making good disturbed surfaces and removing materials from site of work complete all as specified and directed.
2	S&F 2nd class HW plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.
3	Taking down shutters of any description exc 1.0 Sqm but n.exc 2.0 Sqm each including removing to store complete all as specified and directed.
4	S&F for 35mm thick factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm BWP commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed.
5	S&F for 30mm th, factory made 2nd class HW glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc complete all as specified and directed.
6	S&F for solid PVC door frame of size 50mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.
7	S&F for factory made solid panel pvc door shutter 30 mm thick (style) con-sisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed.
8	Taking down chowkat or frame with shutter (without taking off shutter from the frame) n.exc 1.5 Sqm each, making good disturbed surfaces and removing materials from site of work complete all as specified and directed.
9	Taking down shutters of any description n.exc 1 Sqm each including removing to store complete all as specified and directed.
10	Refixing the shutter of any description exc 1 sqm an n.exc 2 Sqm each in the same opening complete all as specified and directed.
11	Refixing the shutter of any description n.exc 1 sqm each in the same opening complete all as specified and directed.
12	Hacking out old broken glass any thickness, size quality or description from wooden/ steel frame fixed in repair with wooden beads/ metal pinning and S&F 4 mm thick sheet glass in square n.exc 0.50 Sqm in each pane, fixed with wooden beads or putty (in metal frames etc) complete all as specified and directed.
13	S&F for 75mm butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.
14	S&F for 100mm butt hinges, medium weight, cold rolled mild steel complete all as specified and directed.
15	S&F for 100 mm aluminium handles, cast type, anodised complete all as specified and directed.
16	S&F for 100mm aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.
17	S&F for aluminium alloy, anodised, sliding door bolt 250mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete.
18	S&F for 150 mm thick Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.
19	S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed.
20	M&L for PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in hold fast block, filling in pressed steel chowkats including necessary form work etc complete all as specified and directed.
21	Dismantling of timber scantling 40 sqcm and over in section in any position unframed work complete all as specified and directed.
22	S&F for 2nd class hard wood in scantlings wrought timber fixed complete all as specified and directed.
23	M&L for preparation of untreated new wooden surface of any description over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint, with a coat of pink primer complete all as specified and directed.
24	S&F in repair 18/19 mm thick prelaminated particle board, interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, as in cupboard shelves /door shutters, etc complete all as specifed. Including taking down existing complete all as specified and directed.
25	S&F in repair 100 mm size hasp and staple, aluminium anodised including bolt to hinge plate and fixed with screws complete all as specified and as directed.
26	S&F for 40mm dia, cupboard knobs brass polished fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed.
27	Repair/ resecuring of aluminium door, easing & adjusting including taking down and refixing in same opening etc, complete all as specified and as directed.
28	S&F for powder coated anodised aluminium section of any type for replacing damaged members if any for shutters including joinin cleats for fixing etc complete all as specified and directed.
29	S&F in repair door closer hydraulically regulated designed No 2universal type, suitable for door shutter of 851 to 1000 mm in width and weighting between 61 to 80 kg of aluminum extruded section complete all as specified and directed.
30	S&F in repair Curtain rod, mild steel, chromium plated with fixing brackets,stops, rollers etc complete all as specified and directed.
31	S&F in repair of 600 mm x 450 mm bevelled edge looking mirror of selected quality glass, mounted on 6mm thick AC building boards or commerical plywood and fixed to wooden plugs with chromium plated brass screws and cup washer complete all as specified and directed.
32	Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.
33	S&F for vitrified ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc, set jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cm 1:4 complete all as specified and directed.
34	S&F for glazed ceramic tiles 350 x 250 x 7 mm / 450 x 350 x 7 mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in Coloured cement to match incl sreed bed 10 mm thick in cement mortar 1:4 complete all as specified and directed.
35	Dismantling ceiling boarding of any description fixed in any position with nails incl cover fillets complete all as specified and directed.
36	Providing and fixing false ceiling of designer tile ivory painted (high pressure steam cured) of 4mm thick (as per IS: 14862) of size 595x595mm and any one of the design (cascade or electra) in true horizontal level. Suspended on inter locking metal grid of hot dipped galvanized steel section (galvanized @120gms both side inclusive and black painted groove on all T webs)consisting of main T runner with suitably spaced joints to get required length and 15x32mm made of 0.3mm thick sheet spaced at 1200mm c/c and cross T of size 15x32mm made of 0.3mm sheet 1200mm long spaecd between main T at 600mm c/c to form a grid of 1200x600mm and secondary cross T of length 600mm and size 15x32mm made of 0.3mm thick sheet to be interlocked at middle of the 1200x600mm panel to form grids of 600x600mm and wall angle of size 24x22x0.40mm and laying false ceiling tiles in the grid including required cutting/making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc.Main T runners to be suspended from trusses/ ceilings using suitable suspension arrangement as per manufacturers instructions/literature. GI adjustable wire of 4mm dia with galvanized butterfly level clips spaced at 1200mm c/c along main T bottom exposed width of 15mm of all T section of 4mm dia GI wire shall be pre-painted with with polyster paint and black painted groove at centre of size 4mm depth and 4.5mm width, all complete all as specified and directed.
37	Dismantaling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.
38	S&F for Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.
39	S&F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as complete all as specified and directed.
40	S&F in repair 15 mm bore bib tap, chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.
41	S&F in repair 15 mm bore Stop valves, fancy type chromium plated cast copper alloy, crewed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
42	S&F in repair 15 mm bore Pillar taps, cast copper alloy,fancy type with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.
43	S&F in repair Brass CP wash hand basin mixer with ,cast copper alloy with capstan head chromium plated screwed down high pressure with or with out lettered hot & cold mix with long screwed shank and fly nut screwed down for iron pipe and fixed complete all as specified and directed.
44	S&F in repair Brass CP wall mixer with hand shower swan neck ,cast copper alloy with capstan head chromium plated screwed down high pressure with or with out lettered hot & cold mix with long screwed shank and fly nut screwed down for iron pipe and fixed complete all as specified and directed.
45	M&L for 32mm waste fittings, brass, chromium plated for wash hand basins etc with long screwed shanks and fly nuts, flange and bedded in red lead cement and other end fixed complete all as specified and directed.
46	S&F in repair 20mm Ball valves, high pressures of PTMT, with epoxy coated aluminium rod & high-density plastic ball screwed for iron pipe, Minimum wt (15mm -142gms) complete all as specified and directed.
47	S&F in repair CP Grating doom 125 mm dia (minimum wt 40grms) complete all as specified and directed.
48	S&F in repair PVC seat cover for EWC of white colour complete all as specified and directed.
49	S&F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.
50	Taking up or down steel tubing 15mm and connections, including cleaning for refixing or removal to store complete all as specified and directed.
51	Taking up or down steel tubing 20 mm and connections, including cleaning for refixing or removal to store complete all as specified and directed.
52	S&F for 15mm bore steel water tubing medium grade galvanizes for fixed to walls, floors, roof ceiling etc including thread, soluvent and etc complete all as specified and directed.
53	S&F for 20mm bore steel water tubing medium grade galvanizes for fixed to walls, floors, roof ceiling etc including thread, soluvent and etc complete all as specified and directed.
54	S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.
55	Disconnecting existing tanks, exc 250ltr but n.exc 500 ltr, Cleaning and removing all scale and dirt, etc, from tanks and from mouths of circulating pipes, etcsetting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed.
56	S&F for 500 ltrs capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed.
57	All as per item No 56 above but for 1000 ltr capacity complete all as specified and directed.
58	S&F in repair, water tank cover for tanks of size 500 ltr or 1000 ltrs water storage tank complete all as specified and directed.
59	S&F in repairs Chromium plated shower rose 195 mm size with or without swivel joint including fixing to steel pipe or union complete all as specified and directed.
60	M&L for bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required hooks (stay), heavy, for large gates, hook and pintle hinges large hasps and staples; chains hand made sliding bolts clamps hold fasts wall ties hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.
61	M&L for preparation of new steel surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
62	S&F for framed work such as grills,gratings,etc with ends of bars, shouldered and / or riveted. or forged into spikes,framed guard bars barred iron doors ladders.framed balusters walk ways railings framework of watertanks and similar work conforming to Fe.290. Gde-E-165 complete all as specified and directed.
63	S&F for 5mm thick sheet glass, ordinary quality, exc 0.5 sq. m in each pane including for glazing clips, rubber packing, anodised aluminium snap on beading for fixing glass panes in frames and including hacking out old broken glass complete all as specified and directed.
64	S&F for powder coated aluminium door frame with shutter of section 100mm x 45 mm thickness of sheet 16 gauge, paritially glazed and panelled lock rail / bottom rail of shutter 100mm x 45mm top raio 80mm x 45mm including necessary jointing cleats glazinging clips, rubber packing anodised aluminum including necessary fitting and aluminium mongeries i.s 150 mm long two nos aluminium handles 02 nos, 200 mm long aluminium tower bolts hinges with each leaf ,rubber gasket for securing the glass and 3 Nos 100 mm long butt hinges with each leaf with and including 5.0 mm thick tinted glass pvc panelling including mortice lock grills in glazed portion etc complete all as specified and directed.
65	S&F for powder coated aluminium sliding windows two track with two sliding shutters with extrusions aluminium of following sections including jointing cleats, glazing clips, rubbr packaging, snap beading and other necessary builders hardware as required complete all as specified and directed. (A) FRAME:-(i) Top and side member for two track frame of size 61.85 mm x 31.75 mm x 1.5 mm (weight 0.784 kg/ mtr), Model No. 20829 of Jindal or equivalent as specified in PS.(ii) Bottom rail of frame for sliding of size 61.85 mm x 31.75 mm x 1.5 mm (weight 0.909 kg/ mtr), Model No. 20830 of Jindal or equivalent as specified in PS.(B) SHUTTER:-(i) Top and bottom rail of sliding shutter of size 40 mm x 18 mm x 1.5 mm (weight 0.547 Kg/ mtr), Model No. 20736 of Jindal or equivalent as specified in PS.(ii) Side of sliding shutter with handle and self locking arrangement, section of size 40 mm x 18 mm x 1.5 mm (weight 0.547kg/ mtr), Model No. 20738 of Jindal or equivalent as specified in PS.
66	(C) Sliding shutter to be provided with 5.0 mm thick sheet glass complete all as specified and directed.(D) Supply & Fix for 6.5 mm thick aluminium diamond grill with mill finished fixing on wall/wooden chowkhat/ aluminium frame with suitable size of aluminium 'U' channel and steel chromium plated, screw with rawel plug complete all as specified and directed with following details:- (i) Aperture size of aluminium grill 67 mm x 84 mm. (ii) Cord dimension 7 mm x 5.8 mm. (iii) Plate thickness 2 mm. (E) Supply & Fix for Galvanised mild steel wire cloth, 0.63 mm nominal dia of wire and average width of aperture 1.40 mm fixed with galvanised wire staples/ clip/ aluminium flat complete all as specified and directed.
67	M&L for aluminium ventilator frames with frame of section 100mm x 44 mm of thickness 1.6 mm shutters of section 32 mm x 15mm (with and including half portion fixed glazed shutter and rest half portion louvered with glazed shutter) including stainless steel wire mesh, rubber gasket for securing th glass, 5.5 mm thick figured glass , aluminium grill and necessary aluminium mongaries and handles including necessary locking arrangment complete all as specified and directed.
68	M&L for prepariation of new surfaces of ceilings and applying three coats of white wash complete all as specified and directed.
69	S&F in repair 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.
70	M&L for plain cement concrete 100 mm thk 1:4:8 type D2( using 40 mm graded aggregate )crushed stone aggregate as in sub floors,sub bases,floors and paving etc complete all as specified and directed.
71	Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.
72	S&F for solid PVC wall lining consisting of 5mm thk wood grain printed PVC sheet used instead of plain colour sheet complete all as specified and directed.
73	M&L for 2nd class soft wood plain fillet ,square,rectangular triangular insection ,clean sawn,secured with nail or brads having cross sectional area exc 6 and n.exc 13 Sqcm complete all as specified and directed.
74	S&F in repair PVC valveless, syphone action type flushing cistern, low level,white with inlet ball valve float and handle 10 ltrs capacity incl brackets in repairs complete all as specified and directed.
75	S&f in repair Vitreous China squatting pan of pattern “long pan”, size 580 mm white with ‘P’ or ‘S” trap, front or back inlet and foot rests, any pattern (excluding flushing cistern and flush pipe) complete including privion cement concrete bedding complete all as specified and directed.
76	M&L for Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.
77	S&F in repair Welded steel wire fabric weight per squaremeter n.exc 4Kg fixed to wood or steel members complete all as specified and directed.
78	S&F in repair 20mm Gun-metal, glove or gate valves with iron wheel head, screwed bothends for iron pipes and fixed complete all as specified and directed.
79	S&F in repair Brass CP tubular Towel rail, 20mm dia including brackets complete all as specified and directed.
80	S&F for sinks with drainage board made of stainless steel 1mm thk kitchen or laboratory with plugs, washers and waste ,including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915 mm x 460mm bowl size 410mm x330mmx 160mm complete all as specified and directed.
81	S&F in repair vitreous china wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistren and flush type) complete all as specified and directed.
82	S&F in repair vitreous china wash basin, white, flat back, size 630x 450mm excluded taps, waste ,chain and plug and proclean stopper but including brackets and cutting and pinning in ends of brackets or erecting stand complete all as specified and directed.
83	M&L for 9mm thick plywood ,grade BWP, type BB fixed with screws to timber frame work complete all as specified and directed.
84	S&F for steel plate rack of size 600x 900x 250mm complete all as specified and directed.
85	M&L for preparation of old decorated plastered surfaces of walls and applying one coat of white wash complete all as specified and directed.
86	M&L for preparation of old decorated plastered surfaces of ceiling/false celing and applying one coat of white wash complete all as specified and directed.
87	M&L for Preparation of old decorated plastered surfaces of walls by washing, rubbing down and stopping of distempered surfaces and applying one coat of distemper oil emulsion complete all as specified and directed.
88	Preparation of old painted wooden surface of any description over 10 cms widths or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
89	Preparation of old painted steel surface of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
90	M&L for preparation of old decorated plastered surfaces of walls by washing, rubbing down and stopping of distempered surfaces and applying two coat of distemper oil emulsion over one coat of wall care putty incl complete removal of existing treatment complete all as specified and directed.
91	M&L for Taking down Cement plaster on concrete surfaces,brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc at any postion complete all as specified and directed.
92	M&L for rendering 15 mm thick in cement mortar 1:4 on other than fair faces of brick work or concrete surfaces complete all as specified and directed.
93	M&L for rendering 05 mm thick in cement mortar 1:3 on ceiling complete all as specified and directed.
94	M&L for rendering 10 mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces complete all as specified and directed.
95	M&L for preparing new surfaces and applying two coats of white wash to external wall complete all as specified and directed.
96	M&L for preparing new surfaces and applying single coats of white wash to ceiling complete all as specified and directed.
97	M&L for preparing new surfaces and applying two coats of distempering walls with distemper oil emulsion, white or tinted complete over chalk whitening, on plastered surfaces to internal walls complete all as specified and directed.
98	S&F in repair grating doom 100mm dia of PTMT (Minimum weight 5gms) complete all as specified and directed.
99	S&F in repair Chromium plated shower roses 150mm size with swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.
100	S&F in repair Vitreous China wash down water closet pan (Pedestal Pattern), white including white plastic seat cover with mild steel CP hinging device, suitable brass CP wash jet, flush pipe fixed as in repair complete jointing, connecting and making good the disturbed surfaces complete all as specified and directed.
101	Treatment of sunken floor shall be tested for leakage / seepage / dampness by ponding with water for 72 hours. In case any defect is noticed the portion shall be grouted with cement slurry mixed with suitable chemical & tested again. The process of grouting and testing shall be repeated till leakage / seepage / dampness is eliminated and follows as per S. No. (i) to (vi) :- (a) Demolition of concrete of any description and in any position not otherwise specifically provided or in any type of filling in sunken portion & cleaned the sunken potion incl vertical wall surface complete as directed.(b) S&F spouts of 25mm dia GI pipe light grade projecting 450mm clear of face outer a wall with mosquito proof cap on inner face of pipe shall be provided to drain out seepage water ,including cutting holes and making good if needed as specified and directed.(c) M&L for Laying of 40mm thick (Min) PCC (1:2:4) type B-0 using 12.5 mm graded stone aggregate with integral water proofing compound as per manufacturer instructions on bottom of sunken portion with proper slope towards spout. Bottom and vertical sides shall be plastered in CM (1:3) 10 mm thick mixed with water proofing compound as per manufacturer instructions. Plaster shall be extended over PCC coving when the same is green i.e. PCC & plaster be carried out at the same time complete all as specified and directed.(d) M & L for 5mm thick cement sand mortar (1:3) admixed with diluted DURAKRIT (1 Durakrit: 3 Water) at the junctions of the wall. Wet the surface with water to make it SSD condition. Apply one coat of DURAKRIT- Acrylic Polymer Modified Cementatious (PMC) slurry coating as per manufacturer specification 1:2 (1 DURAKRIT : 2 cement) by weight on the sunken floor surface; turned up and finished up to 100mm from FFL. Apply second coat of DURAKRIT - Acrylic Polymer Modified Cementatious slurry coating as per manufacturer specification 1:2 (1 DURAKRIT : 2 cement) by weight over the first coat at right angles. The second coat is usually applied after first layer slurry coat has touch dried usually after 4 hrs.complete all as specified and directed.(e) Test again of water tightness by ponding for 72 hours & rectify defects if any till total elimination of defects complete all as specified directed.(f) M&L to fill the sunken floor with PCC (1:5:10) type E-2 using bk aggregate over the treated surface complete all as specified directed.
102	S&F in repair 32 mm dia PVC waste pipe of 850mm length for Sink/ WHB complete all as specified and directed.
103	De-watering of septic tanks and soakage wells by manually or with pumping set and draining out the same out of cantt area complete all as specified and directed.
104	Taking out sludge from septic tanks incl inlet and outlet chambers, removing and depositing the sludge in a pit at a distance of minimum 50m from nearby living accn and covering the sludge in the pit with earth and finally spraying unslaked lime, dry, around the septic tank and over the pit complete all as specified directed. Note : Cost of earth work in the pit is deemed to be included in the unit rate quoted by the tenderer.
105	Cleaning of blocked drain pipes (SGSW/ hume pipe) up to 150 mm bore by rodding from manholes and well flushing with water after cleaning the same all as required including disposing off the deposited sludge, etc inside pipes to a distance exc 50m & n.exc 200 m, burried under ground (minimum 30 cm below ground level) including necessary excavation of pits in soft/loose soil and returning, filling in including sprinkling of bleaching powder at the rate of 0.20 Kg/ Sqm and dressing of surplus soil around slope complete all as specified and directed.
106	Cleaning of manholes including taking out accumulated semi liquid, sludge and other deposits such as broken bricks , silt etc from manholes of depth n.exc 1.5 m, cleaning as directed and removing the same to a distance n. exc 50 m and burried under ground (minimum 30 cm below ground level) including necessary excavation of pits in soft loose soil and returnig, filling in including sprinking of bleaching powder at the rate of 0.20 Kg/ Sqm and dressing of surplus soil around to slope complete all as specified and directed.
107	Demolition of brick work, built in cement mortar complete all as specified and directed.
108	M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:4 using old size bricks complete as in manholes etc complete all as specified and directed.
109	Plain Cement Concrete Type B-1 1:2:4 (using 20 mm graded granite stone aggregate) as in cills, benching and other similar bands, plinth courses, parapets, copings, bed plates and the like including weathering, slightly rounded or chamfered angles and throating as directed including use and waste of form work complete all as specified and directed.
110	Demolition of RCC n.exc 15cm thickness complete all as specified and directed.
111	M&L for precast reinforced cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in cover slab of manholes, septic tank etc, set in cement mortar (1:4) including necessary form, moulds etc and including taking out/ removal of existing unserviceable cover slab from manholes /septic tank complete all as specified and directed.Note :- Reinforcement shall be measured and paid separately.
112	M&L for Mild steel TMT bars 10 mm dia and over as in reinforcement cut to length bent to shape required including cranking, hooking ends and binding with mild steel wire (annealed) not less than 0.90 mm dia complete all as specified and directed.
113	Demolition and breaking up 110 mm bore drain pipes (SGSW/ AC/ RCC) set in cement mortor complete all as specified and directed.
114	Demolition and breaking up 150 mm bore drain pipes (SGSW/ AC/ RCC) set in cement mortor complete all as specified and directed.
115	S&F for 150 mm bore, PVC(SWR) pipe (minimum 6 kg/ cm² pressure pipe) single socketed, in any length with rubber ring joints laid in floors or trenches etc including all necessary fittings complete all as specified and directed.
116	S&F for 110 mm bore, PVC (SWR) Soil, waste and vent pipes single socketed, in any length with rubber ring joints laid in floors or trenches etc complete all as specified and directed.
117	Cleaning of blocked EWC by using rubber hand pump and opening the eye and making the line clear for smooth function complete all as specified and directed.
118	Cleaning of blocked IWC by using rubber hand pump and opening the eye and making the line clear for smooth function complete all as specified and directed.
119	Cleaning of blocked nahani trap in bathroom / kitchen or blocked gully trap by using rubber hand pump and opening the eye and making the line clear for smooth function complete all as specified and directed.
120	S&F in repair 110 mm bore PVC (SWR) vent cowl complete all as specified and directed.
121	S&F in repair 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed.
122	S&F in repair 110 mm bore, PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and directed.
123	S&F in repair 110 mm bore, PVC (SWR) junction double, (Double T) equal or unequal complete all as specified and directed.
124	S&F in repair 75 mm bore PVC (SWR) bends of any radius complete all as specified and directed.
125	S&F in repair 75 mm bore, PVC (SWR) Soil, waste and vent pipes single socketed, in any length with rubber ring joints laid in floors or trenches etc complete all as specified and directed.
126	S&F in repair 110 mm bore, PVC (SWR) Soil, waste and vent pipes single socketed, in any length with rubber ring joints laid in floors or trenches etc complete all as specified and directed.
127	S&F in repair 110 mm bore, PVC (SWR) Soil, waste and vent pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified and directed.
128	Excavation in trenches n.exc 1.5m deep and n.exc 1.5m wide in Hard/d ense soil for foundations etc and getting out complete all as specified and directed.
129	Returning filling in incl spreading, levelling watering and well ramming in layers n.exc 25cm in soft/ disintegrated rock complete all as specified and directed.
130	Removing excavated material exc 250m and n.exc 500m and depositing where directed in soft disintegrated rocks complete all as specified and directed.
131	Demolition of cement concrete (un-reinforced) of any description and in any position such as in bed for drain pipe etc complete all as specified and directed.
132	M&L for plain cement concrete 1:3:6 type C-2 (using 40 mm graded broken stone aggregate) as in bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested complete for 150 mm bore drain pipes complete all as specified and directed.
133	Demolition of existing SGSW gully trap including PCC kerb etc and Supply and Fix SGSW gully trap square mouthed 100mm size set in PCC (1:3:6) type C1 block measuring 450mm and 100mm thick bed concrete and jointing to drain pipe in cement mortar (1:1) including 100x150mm high PCC kerb in (1:2:4) type B1 with CI perforated grating 150 x 150mm bituminous coated including disposal of waste/ sludge complete all as specified and directed.
134	M&L for PVC (SWR) gully trap 125/110 mm ,setting and jointed with solvent complete all as specified and directed.
135	Demolition of PCC around floor trap and dismantling existing floor trap and cleaning the blockage of pipe from floor trap to gully trap and Supply & Fix PVC floor/Nahani trap in existing pipe and embedding in cement mortar (1:1) including lowering or raising with vertical piece with PVC pipe for jointing trap and fixing gratings at true level of floor complete all as specified and directed.
136	Taking down cement or cement lime plaster of any description on brick or stone walls, etc. including racking out joints, hacking for key, scrubbing down with water etc.&removing rubbish to a disance n.exc 250m complete all as specified and directed.
137	M&L for rendering 10mm thick on fair faces of brick work or stone masonry or concrete surfaces in cement mortar 1:6 and finished fair and even without using extra cement incl; mixing of water proofing compound of approved make complete all as specified and directed. Note: WPC shall be measured and paid for separatly.
138	M&L for rendering 15 mm thick on other than fair faces of brick work or stone masonry or concrete surfaces in cement mortar 1:4 and finished fair and even without using extra cement complete all as specified and directed.
139	M&L in repair for Preparing newly plaster surfaces(external face) of walls and applying one coat cement based paint over a coat of alkali resistance primer complete all as specified and directed.
140	M&L in repair for Preparing newly plaster surfaces(internal face) of walls and distempering walls with one coat distemper oil emulsion white or tinted complete over a coat of alkali resistant priming paint complete all as specified and directed.
141	S&F in repair vitreous China urinals type ( black or corner wall type) complete including providing and fixing plugs. Bedding urinal againgt wall in cement mortar 1:2, securing urinal to plug with and incuding 60 mm long brass screws,pointing around urinal back in cement, fixing flush pipe, grating and union for discharge pipe complete all as specified and directed.
142	S&F in repair 75mm bore, PVC (SWR) junction single, (single T) equal or unequal complete all as specified and directed.
143	S&F in repair 32mm dia PVC waste pipe waste pipe of 850 mm length for Sink/WHB complete all as specified and directed.
144	S&F in repairs 75mm bore PVC (SWR) floor trap with grating complete all as specified and directed.
145	Cutting into existing manholes for connecting new drains,making good to pipe of dia150 mm and rendering ,cutting out existing benching for and forming branch channel (1/2 round or 3/4 section )in cement concrete 1:2:4 type B-1 smooth finished and reformiing benching as required complete all as specified and directed.
146	S&F for 10 to 15mm thick Paver tiles (Square/ rectangular) area of each tile exc 0.06 Sqm but n.exc 0.11 Sqm complete all as specified and directed.
147	M&L for 100 thick PCC 1:3:6 Type C-2 (using 40mm graded stone aggregate) as in sub floors, sub-bases or plinth protection complete all as specified and directed.
148	Screed bed or bedding layer in cement mortar 1:6 of 15 mm thk for laying floor finishes complete all as specified and directed.
149	Dismantling of existing unserviceable heating element from geyser and Supply & fixing new heating element of 1.5 KW 230 volt suitable for 25 ltr to 35 ltr geyser including testing and connection complete all as specified and directed.
150	Dismantling of existing unserviceable heating element from geyser and Supply & fixing new heating element of 2.0 KW 230 volt suitable for 50 ltrs geyser including testing and connection complete all as specified and directed.
151	Dismantling of existing unserviceable thermostat of geyser for 50/ 25 Ltr capacity and Supply & fixing new thermostat matching to existing one including all connection, testing etc complete all as specified and directed.
152	S&F in replacement of 15 Amp,3 pin, 230volts,50Hz plug top complete with all connection complete all as specified and directed.
153	S&F in replacement of stainless steel hot water connection pipe 15 mm dia 60 cm long heavy duty with two Nos brass chromium plated union complete all as specified and directed.
154	S&F for indiacator lamp (red and green) complete all as specified and directed.
155	Supply& fixing nut bolts and washers suitable for existing complete all as specified and directed.
156	Taking down geyser of any capacity, make, model, type from its position after disconnecting connection of geyser to take out to workshop for repairs and refixing back to its original position after repairs complete all as specified and directed.Note:- Spares parts shall be measured and paid seperately under appropriate items.
157	Inner tank of any model/ make/ type /material for soldering at two to three places complete all as specified and directed.
158	Apparatus plate of any model/ make/ type /material complete all as specified and directed.
159	Glass wool suitable for insulation complete all as specified and directed.
160	CP brass base plate with adaptor matching to existing size complete all as specified and directed.
161	Taking down carefully aluminium / copper point wiring (light, fan, socket, power point) including batten, conduit, casing caping and fittings to match with existing surface complete removing from site, making good disturbed surfaces of wall, floor, ceiling complete all as specified and directed.
162	M&L for point wiring with 1.5 sqmm cable PVC insulated, unsheathed type, copper conductor, multistranded cable (FRLS Type), 1100 Volts grade (red colour cable for phase and black colour cable for neutral) including 1.5 sqmm copper conductor, multistranded cable (FRLS type) 1100 volts grade unsheathed PVC insulated ( green colour cable for earth wire) continuity earth wire connected to common earth dolly to be drawn in and including PVC casing capping, medium grade of suitable size including all fittings such as bend, elbow, tee, joint etc with sunk cast pressed steel terminal box made out of MS sheet with 3 mm thick hylum laminated sheet cover / plastic gang box for mounting of switch, socket, fan regulator complete all as specified and directed for following:-
163	Light / fan / bell point controlled by one number one way switch
164	5 Amp socket point on same board
165	5 Amp switch socket point on independent board
166	All as per item Ser No 162.00 here in before but with 2.5 sqmm PVC insulated, unsheathed cable multistranded FRLS type, copper conductor (for phase & neutral) and 2.5 sqmm (for earth wire with same specification) for 6/16 Amp switch socket point on independent board.
167	All as per item Ser No 162.00 here in before but with 4.0 sqmm PVC insulated, unsheathed cable multistranded FRLS type, copper conductor (for phase & neutral) and 4.0 sqmm (for earth wire with same specification) for 6/16 Amp switch socket point on independent board.
168	M&L for concealed point wiring with 1.5 sqmm cable PVC insulated, unsheathed type, copper conductor, multistranded cable (FRLS Type), 1100 Volts grade (red colour cable for phase and black colour cable for neutral) including 1.5 sqmm copper conductor, multistranded cable (FRLS type) 1100 volts grade unsheathed PVC insulated ( green colour cable for earth wire) continuity earth wire connected to common earth dolly to be drawn in and including PVC conduit, medium grade of suitable size including all fittings such as bend, elbow, tee, joint, junction box including cutting chases for concealed conduits/ sunken boxes and making good to disturbed walls,floors with sunk cast pressed steel terminal box made out of MS sheet for mounting of switch, socket, fan regulator with 3 mm thick hylum laminated sheet cover complete all as specified and directed for following:-
169	Light / fan / bell point controlled by one number one way switch
170	5 Amp s socket point on same board
171	5 Amp switch socket point on independent board
172	All as per item Ser No 165.00 here in before but with 2.5 sqmm PVC insulated, unsheathed cable multistranded FRLS type, copper conductor (for phase & neutral) and 2.5 sqmm (for earth wire with same specification) for 6/16 Amp switch socket point on independent board.
173	S&F in repair / replacement of submain wiring with 2 X 1.5 sqmm, PVC insulated, unsheathed, copper conductor cable, multistranded, single core, FRLS type, 1100 volts grade alongwith 1 X 1.5 sqmm PVC insulated, unsheathed, copper conductor cable, multistranded, single core, FRLS type, 1100 volts grade for continuous earth wire complete drawn through and including PVC casing caping, medium grade of suitable size with all fittings such as bend, elbow, tee, joint including making good the disturbed surface complete all as specified and directed.
174	S&F in repair / replacement of submain wiring with 2 X 2.5 sqmm, PVC insulated, unsheathed, copper conductor cable, multistranded, single core, FRLS type, 1100 volts grade alongwith 1 X 2.5 sqmm PVC insulated, unsheathed, copper conductor cable, multistranded, single core, FRLS type, 1100 volts grade for continuous earth wire complete drawn through and including PVC casing caping, medium grade of suitable size with all fittings such as bend, elbow, tee, joint including making good the disturbed surface complete all as specified and directed.
175	M&L for sub main wiring with 2 run of 4 Sqmm (nominal cross-sectional area) PVC insulated unsheathed single core FRLS cable of working voltage 1100 volts grade with stranded copper conductor including one run of 4.00 Sqmm (nominal cross sectional area) PVC insulated unsheathed cable with stranded copper conductor as continuous earth wire connected to common earth dolly drawn in PVC rigid non- metallic conduit with and including taking down unsv sub main complete all as specified and directed.Note : (i) PVC non rigid nonmetallic conduit shall be measured & paid separately under relevant item of this Schedule ‘A’.(ii) Two run of submain wiring cable alongwith one run of earth wire with and including 25 PVC conduit pipe shall be measured as one unit length).
176	S&F in repair / replacement of submain wiring with 2 x 4.0 sqmm, PVC insulated, unsheathed, copper conductor cable, multistranded, single core, FRLS type, 1100 volts grade alongwith 1 x 4.0 sqmm PVC insulated, unsheathed, copper conductor cable, multistranded, single core, FRLS type, 1100 volts grade for continuous earth wire complete drawn through and including PVC casing caping, medium grade of suitable size with all fittings such as bend, elbow, tee, joint including making good the disturbed surface complete all as specified and directed.
177	S&F in repair / replacement of submain wiring with 2 X 6.0 sqmm, PVC insulated, unsheathed, copper conductor cable, multistranded, single core, FRLS type, 1100 volts grade alongwith 1 X 6.0 sqmm PVC insulated, unsheathed, copper conductor cable, multistranded, single core, FRLS type, 1100 volts grade for continuous earth wire complete drawn through and including PVC casing caping, medium grade of suitable size with all fittings such as bend, elbow, tee, joint including making good the disturbed surface complete all as specified and directed.
178	S&F in repair / replacement of switch piano flush type 5/6 amps, 230 volt, one way, single pole complete all as specified and directed.
179	S&F in repair / replacement of socket 5 pin, multipurpose type, 5 Amps, piano flush type, 230V complete all as specified and directed.
180	S&F in repair / replacement of switch socket combination 2 in 1, 5 pin, multipurpose type, 5/6 Amps, piano flush type 230 V complete all as specified and directed.
181	S&F in repair / replacement of switch socket combination 6 pin, multipurpose type, 15/16 Amps, piano flush type 230 V complete all as specified and directed.
182	S&F in repair / replacement of bell push switch, piano flush type 5 amps, 240 volts, single pole complete all as specified and directed.
183	S&F in repair / replacement of step type electronic fan regulator piano flush type, 230 Volts, 5 speed complete all as specified and directed.
184	S&F in repair / replacement of electric buzzer / ding dong bell, AC, 230 volt single phase complete all as specified and directed.
185	S&F in repair / replacement of ceiling rose 3 terminals / PVC / Polycarbonate, isolated body, surface type with ISI marked 230 V complete all as specified and directed.
186	S&F in repair / replacement of lamp holder, PVC / polycarbonate type with back plate straight or angular, 230 volts suitable for batten fitting complete all as specified and directed.
187	S&F in repair / replacement of modular switch 1 way 10 Amps, 1 module, 230 volt complete all as specified and directed.
188	S&F in repair / replacement of modular switch 1 way 16 Amps, 1 module, 230 volt complete all as specified and directed.
189	S&F in repair / replacement of modular socket 1 way 6 Amps, 2/3 pin combined, 2 module, 230 volt complete all as specified and directed.
190	S&F in repair / replacement of modular socket 1 way 6/16 Amps, 3/3 pin combined, 2 module, 230 volt complete all as specified and directed.
191	S&F in repair / replacement of modular Bell Push Switch 10 Amps 1 module, 230 volt complete all as specified and directed.
192	S&F in repair / replacement of Modular type electronic fan regulator 2 module, 5 speed complete all as specified and directed.
193	S&F in repair white cover plate with frame 3 module including taking down existing unserviceable complete all as specified and directed.
194	S&F in repair white cover plate with frame 6 module including taking down existing unserviceable complete all as specified and directed.
195	S&F in repair white cover plate with frame 8 module including taking down existing unserviceable complete all as specified and directed.
196	S&F in repair modular metal flush box of 3 Module including taking down existing unserviceable complete all as specified and directed.
197	S&F in repair modular metal flush box of 6/8 Module including taking down existing unserviceable complete all as specified and directed.
198	M&L for PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 100 mm x 100 mm and 50 mm deep complete all as specified and directed.
199	M&L for PVC rectangular block for mounting, switches, sockets, fan regulator etc. with 3 mm thick plastic laminated sheet cover of size 175 mm x 100 mm and 50 mm deep complete all as specified and directed.
200	S&F for Rigid non-metallic PVC conduit external dia 25 mm exclusive of boxes (junction/ terminal) but inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers, lock nuts, saddles, pipe hooks etc complete all as specified and directed.
201	S&F for PVC casing capping 25 mm size including fixing accessories such as couplers, lock nuts complete all as specified and directed.
202	S&F in repalcement of Single pole and neutral enclosure with a two pin and earth plug and socket complete with one capacity 10 Amps, 230 Volts complete all as specified and directed.
203	S&F in repair of sheet metal enclosure, MCB DB, double door, single pole & neutral, 12 way, 230 volts, 50 Hz with suitable bus bar, neutral link, earth link complete all as specified and directed.
204	S&F in repair of sheet metal enclosure, MCB DB, double door, single pole & neutral, 8 way, 230 volts, 50 Hz with suitable bus bar, neutral link, earth link complete all as specified and directed.
205	S&F in repair of sheet metal enclosure, MCB DB, double door, single pole & neutral, 4 way, 230 volts, 50 Hz with suitable bus bar, neutral link, earth link complete all as specified and directed.
206	S&F sheet metal enclosure, MCB DB, double door, triple pole & neutral, 4 way, 415 volts, 50Hz loadline type with vertical busbar suitable for MCB as incomer and MCB SP/ TP as out going including suitable bus bar, neutral link, earth link complete all as specified and directed.
207	S&F in repair MCB single pole, 6 to 32 Amps, 230 volts, 10 kA, C series complete all as specified and directed.
208	S&F in repair MCB single pole and neutral , 32 Amps, 230 volts, 10 kA, C series complete all as specified and directed.
209	S&F in repair MCB Triple pole and neutral , 40 to 63 Amps, 415 volts, 10 kA, C series complete all as specified and directed.
210	S&F in repair of ultra slim LED batten 10 Watt, 230Volts, 50 Hz, decorative ultra slim LED lighting fixture with extruded polycarbonate, environmental friendly including lamp, connection wire complete all as specified and directed. Make Havells Cat Part No:- LHEXAZP7PN1W010.
211	S&F for Inverter Type LED lights fitting 1 X 20 W, 6500 K, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.Make : Havells cat part No :- LHEXASP7IN1W020.
212	S&F in repair of bulk head luminaire environmental friendly, ultra modern, energy saving, surface mounted, decorative oval bulk head edge -lit LED luminaire comprising of high brightness LEDs 10 watt, 230 volts, 50 Hz including lamp, connection wire complete all as specified and directed. Make : Crompton Cat Part No :- TIS-303-10-57-SL-DP-NWH.
213	S&F in fix in replacemenet LED bulb 07 watt, B 22 type, 230 volts, 50 Hz complete all as specified and directed.Make : Havells Cat Part No :- LHLDDDEGIY2T00.
214	S&F for Decorative wall light made up of high grade engineering plastic material suitable for 9 W LED lamp B22 base. with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete including taking down old one complete all as specified and directed.Make : Crompton Cat Part No :- WALLGLOW-O-E27.
215	S&F in repair of recessed mounted 36 watt (clear white) LED panel light 600 mm X 600 mm, ultra slim design, 230 volts, 50 Hz with CRCA sheet housing precoated white colour and high quality diffuser for uniform light and high efficiency with separate replaceable electronic driver including lamp complete all as specified and directed. Make : Crompton Cat Part No :- CCR-122-36-57-SL-MWS-DP-NWH.
216	S&F for LED Building Security Light Fitting 25 Watt 230 Volt AC, Outdoor type with High Pressure Die Cast Aluminum Housing and Heat Resistant with Driver, Lamp, Surge Protection Device and Corrosion Resistant including Thermal Management in Multipole Optics, having IP 65/66 Protection and Connecting up with 3 Core Flexible Copper Conductor Cable of suitable Size and Length complete all as specified and as directed.Make : Crompton Cat Part No :- ERP-427-25-57-HL2-LM-NBK.
217	M&L for Building Security Light Bracket, made out of GI Pipe 25 mm, Light grade 1.50 Meter in Length for Mounting Light Fitting, bent to Shape as required and and fixed to Walls with and including Clamp(s), Mild Steel Bolts, Nuts, Washers, etc. and Applying Two Coats of Aluminium Paint over a Coat of Red Oxide Zinc Chrome Primer complete all as specified and directed.
218	M&L in repair of earthing complete with galvanised steel earth plate electrode 600 mm×600 mm× 6.3 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 connected to earthing test point/ DB including necessary earth work, common salt, char coal and earth pit as per electrical plate No. 3 of SSR Part-I complete all as specified or indicated point including testing on completion complete including dismantling old complete all as specified and directed.
219	Taking down and refixing after repairs ceiling fans of any make/ model/ sweep in its original position, connecting and testing, including provision of cable from ceiling rose/ connector to fan complete all as specified and directed.
220	Taking down and refixing after repairs exhaust fans of any make/model/sweep in its original position, connecting and testing, including provision of cable from ceiling rose/connector to fan complete all as specified and directed.
221	M&L for rewinding of ceiling fans 1200 /1400 mm sweep of any make/model, including removal of existing burnt windings completely and carefully from the slots, cleaning the slots thoroughly with necessary cleaning agent, applying slot insulation and rewinding with super enameled copper wire of existing guage complete including dismantling and re-assembling of starter, rotor, blades etc all as specified and as directed by the engineer-in-charge. Note:- Rate is inclusive of transportation to and fro from site to workshop in Tinsukia/ Dibrugarh..
222	All as per item No. 215.00 above but exhaust fans up to 300 mm sweep complete all as specified and directed.
223	All as per item No. 215.00 above but exhaust fans 450 mm sweep complete all as specified and directed.
224	M&L for cleaning / preparation of surfaces of ceiling fans up to 1400 mm sweep thoroughly and painting with one coat of spray painting (body and blades both) using synthetic enamel white paint over the existing paint and stenciling of MES No. with black paint over it complete all as specified and directed.Note:- Rate is inclusive of filling of cavities with filler and matching to existing finishing of fans.
225	All as per item No. 218.00 above but exhaust fans up to 300 mm sweep complete all as specified and directed.
226	All as per item No. 218.00 above but exhaust fans from 325 mm to 450 mm sweep complete all as specified and directed.
227	S&F in repair of ball bearings, bearing No.6201 suitable for ceiling fans/wall mounted fans /exhaust fans of any make/model/sweep complete all as specified and directed.
228	All as per item No. 221.00 above but bearing No.6205 complete all as specified and directed.
229	S&F in repair Oil type capacitor of 2.5 Mfd suitable for ceiling fans / wall mounted fans /exhaust fans /air circulator fans /table fans complete all as specified and directed.
230	All as per item No. 223.00 above but 4.0 Mfd complete all as specified and directed.
231	S&F in repair rubber bush with bolt and nut suitable for ceiling fans /wall mounted fans /exhaust fans/ air circulator fans/ table fans of any make/ model/ sweep complete all as specified and directed.
232	S&F in repair split pin and jam nut suitable for ceiling fans / wall mounted fans /exhaust fans /air circulator fans/ table fans of any make/model/sweep complete all as specified and directed.
233	S&F in repair MS down rod 15 mm bore and 450 mm long including two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.
234	S&F in repair the canopy suitable for ceiling fan of existing type & size complete all as specified and directed. Material and labour laying well burnt old size bricks, straight or curved on plan , laid flat with width equal to length of brick , laid dry over electric cable for protection all as specified. Please Enable Macros to View BoQ information

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Assam Tenders

Services Tenders

Industrial Cleaning Services Tenders

Desilting Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Repair/ Maintenance Of Certain Works Like Flooring Joineries Etc, Periodical Services To Otm And Otm Accn, Repair/ Cleaning Of Sewage Lines, Soak Wells, Septic Tanks And Repair/ Maintenance And Rewiring Of Internal Wiring Mcb, Db Etc At Ne, Mohanbari-Assam

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Repair/ Maintenance Of Certain Works Like Flooring Joineries Etc, Periodical Services To Otm And Otm Accn, Repair/ Cleaning Of Sewage Lines, Soak Wells, Septic Tanks And Repair/ Maintenance And Rewiring Of Internal Wiring Mcb, Db Etc At Ne, Mohanbari-Assam

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us