|
| 1 | The work of safe carriage of the following material from store center Nawada/Workshop to work site under the jurisdiction of EDD-Bilsi & Ujhani Approx. distance upto 0-70 Km. Including safe loading and unloading. |
| 2 | PCC Pole Support 8.5 Mtr. Long |
| 3 | PCC Pole Support 11 Mtr. Long |
| 4 | 11 KV MS T-Off Channel (125X65X1300) |
| 5 | Top Channel (125x65x2240 mm) |
| 6 | 11 KV Disc Insulator Composite 45 KN (T&C Type) |
| 7 | 11 KV Pin Insulator polymeric |
| 8 | 11 KV Pin with Nut |
| 9 | 11 KV X-Arm V Type |
| 10 | ACSR Rabbit Conductor |
| 11 | 11 KV XLPE Cable (3x185 sqmm) |
| 12 | Cable Jointing Kit for 11 KV XLPE Cable (3x185 sqmm) O/D |
| 13 | Cable Jointing Kit for 11 KV XLPE Cable (3x185 sqmm) I/D |
| 14 | 11 KV STH Kit (3x185sqmm) |
| 15 | Stay Complete (16X1800) |
| 16 | 11 VCB O/G CTR 200/100/5 |
| 17 | Stay Set (16x1800 sqmm) |
| 18 | The following Decentralized material shall be provided by the contractor for execution of work as per RESPO Norms (the material shall be purchased from approved vendor of Discom). |
| 19 | Droper Channel |
| 20 | HDPE Pipe 140mm |
| 21 | G.I. Pipe 6\\" Dia |
| 22 | Cross Bracing Angle (75x75x6mm) |
| 23 | 11 KV F Clamp with Nut & Bolt |
| 24 | X-Arm Holding Clamp with Nut & Bolt |
| 25 | Stone Pad (300x300x75) |
| 26 | Danger Board with Clamp, nut bolt |
| 27 | Barbed Wire |
| 28 | MS Clamp for Cable Hosting with Nut Bolt |
| 29 | Nut & Bolts |
| 30 | Erection of the following support including cutting, making holes fixing of stone pad and all types of accessories digging of pits complete in all respect as per RESSPO norms. |
| 31 | Single PCC Pole 8.5 Mtr. Long. |
| 32 | Single PCC Pole 11 Mtr. Long. |
| 33 | Double pole of PCC Pole 8.5 Mtr. Long. |
| 34 | Grouting of PCC Pole 8.5/11 Mtr. Long with 1:4:8 mixture in size (450x450x1500mm.) including cost of cement/C.C. & sand Required as per RESSPO Norms. (All Grouting material shall be provided by the contractor). |
| 35 | Erection/Fixing of stay set with stay wire and clamp as per RESSPO norms including binding. climbing, clamping, tightening and nozzeling etc. complete in all respect including its grouting in ratio 1:4:8 of cement, sand and C.C. and sand etc. as per RESSPO norms. All the grouting material shall be provided by the contractor. |
| 36 | Earthing of Pole by MS Earthing Rod (20X2500) and making connections with GI wire (All the material shall be provided by the contractor including earth rod) |
| 37 | Laying, Stringing, Sagging & Jumpring of following Conductor complete in all respect as per RESSPO Norms. |
| 38 | ACSR Rabbit Conductor |
| 39 | XLPE Cable (3x185 sqmm) in double circuit (overhead). |
| 40 | Underground Laying of 11 KV 3x185 sq.mm XLPE cable in double circuit laying of HDPE Pipe 140mm dia (Open trench) method (including cost of digging, bricks, sand along with road restoration) complete in all respect as per RESSPO Norms. |
| 41 | Fixing of 11 KV 3x185 Sq.mm XLPE Cable Indoor jointing kits after carefully removing the insulation of the cable duly plumbing and taping of cable providing, fixing and crimpling of proper size good quality lugs and complete work. |
| 42 | Fixing of 11 KV 3x185 Sq.mm XLPE Cable outdoor jointing kits after carefully removing the insulation of the cable duly plumbing and taping of cable providing, fixing and crimpling of proper size good quality lugs and complete work. |
| 43 | Fixing of 11 KV 3x185 Sq.mm XLPE Cable STH Kit after carefully removing the insulation of the cable duly plumbing and taping of cable providing, fixing and crimpling of proper size good quality lugs and complete work. |
| 44 | Hoisting of 3x185 mm2 11 KV XLPE cable on double pole with GI pipe of size 6” dia including its jumpering complete with Clamps nut and bolts (Clamp, Nut & Bolts shall be provided by the contractor through approved vendor of UPPCL, Approx. 8 Mtr. Per Hosting). (for double circuit). |
| 45 | Fixing of danger board on each location and G.I. barbed wire including proper clamping as per RESSPO Norms. (Danger Board shall be provided by the contractor as per RESSPO Norms). |
| 46 | Erection/Installation of following 11 KV Panel (VCB) in control room and cable joint of the panel to pole including, grouting of Anchor bolt of Panel and making/repairing of pocket for cable to insert in panel from trench and fixing, taping of bus bar with wiring for PT. AC, DC connection including providing of AC & DC Supply. |
| 47 | Pipe Earthing of 11 KV VCB (By boring of 4 inch diameter upto water level, 40 mm diameter A Class GI pipe is inserted to a depth upto water level and a holed pipe of 1.5m length is inserted at the bottom, Tighten one end of the MS strip of size 50x6mm with the nut bolt with the neutral of the converter and weld the other end with the GI pipe inserted in the boring for earthing. Putting a socket on the upper part of the pipe (mouth) so that water can be poured into it to retain moisture. To complete the work contractor will provide all material, manpower, T&P, safe carriage of material to worksite. Above work will be carried out under supervision of concerned JE/SDO/EE). |
| 48 | Note:-All Item Rate filling with GST by the firm Please Enable Macros to View BoQ information |
