|
| 1 | The work of safe carriage of the following material from store center Nawada/Workshop to work site under the jurisdiction of EDD-Budaun Approx. distance upto 0-20 Km. Including safe loading and unloading. |
| 2 | PCC Pole Support 8.5 Mtr. Long |
| 3 | 11 KV Disc Insulator 45 KN (T&C Type) |
| 4 | 11 KV Disc Fitting 45 KN (T&C Type) |
| 5 | 11 KV Pin Insulator with nut |
| 6 | 11 KV X-Arm V Type |
| 7 | ACSR Weasal Conductor |
| 8 | Stay Set (16X1800) |
| 9 | The following Decentralized material shall be provided by the contractor for execution of work as per RESPO Norms (the material shall be purchased from approved vendor of Discom). |
| 10 | Holding Clamps for Top Channel, TPMO & fuse set etc with nut and bolts |
| 11 | Stone Pad (300x300x75) |
| 12 | Clamp for LT T-Off with Nut & Bolts |
| 13 | Danger Board with clamp, nut & bolt |
| 14 | Erection of Single PCC pole 8.5 Mtr. Long in H.T/L.T lines including fitting of all accessories with stone pad as per RESSPO Norms (All necessary clamps, Nut & Bolts etc. shall be provided by the contractor for execution of work as per RESSPO Norms). |
| 15 | Grouting of PCC Pole 8.5 Mtr. Long with 1:4:8 mixture in size (450x450x1500mm.) including cost of cement/C.C. & sand Required as per RESSPO Norms. (All Grouting material shall be provided by the contractor). |
| 16 | Erection/Fixing of stay set with stay wire and clamp as per RESSPO norms including binding. climbing, clamping, tightening and nozzeling etc. complete in all respect including its grouting in ratio 1:4:8 of cement, sand and C.C. and sand etc. as per RESSPO norms. All the grouting material shall be provided by the contractor |
| 17 | Earthing of Pole by MS Earthing Rod (20X2500) and making connections with GI wire (All the material shall be provided by the contractor including earth rod). |
| 18 | Dismentaling of old & damaged Line as per norms complete in all respect |
| 19 | Laying, Stringing, Sagging & Jumpring of ACSR Weasal Conductor complete in all respect as per RESSPO Norms. |
| 20 | Fixing of danger board on each location and G.I. barbed wire including proper clamping as per RESSPO Norms. (Danger Board shall be provided by the contractor as per RESSPO Norms). |
| 21 | Safe back carriage of Following item (if any) from work site to Store Center, Nawada, Budaun approx distance upto 0-20 Km including loading & unloading. |
| 22 | G.I. wire damaged & Jarjar |
| 23 | Weasel damaged & Jarjar conductor |
| 24 | Iron Scrap |
| 25 | Note:-All Item Rate filling with GST by the firm Please Enable Macros to View BoQ information |
