|
| 1 | Dismantling of floor hearth or wall tiling/ stone slabe incl cement mortar bedding (but not backing) removing serviceable tiles to store & rubbish of the premises, complete all as specified and directed. |
| 2 | Demolition of cement concrete unreinforced of any description and in any position not otherwise specifically provided, complete all as specified and directed. |
| 3 | Supply only Integral waterproofing compound, complete all as specified and directed. |
| 4 | M&L for 75 mm thick PCC 1:3:6, type C-2, using 40mm graded crushed stone aggregate as in plinth protection path etc., complete all as specified and directed. |
| 5 | M&L for 40mm thick PCC 1:2:4, type B-1, using 20mm graded crushed stone aggregate as in base coarse for floors complete all as specified and directed. |
| 6 | M&L for non skid ceramic tiles 7-8mm thick coloured (Square/ rectangular) area of each tiles exceeding 0.06 sqm but n exc 0.11 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed as in CM 1:6, complete all as specified and directed. |
| 7 | M&L for joint free non skid glazed ceramic tiles (coloured) 400x400x 7to8mm thick (square/ rectangular) as in floors set and jointed in cement slurry and pointed in coloured cement including provision of screed bed 15mm thick in CM (1:6), complete all as specified and directed. |
| 8 | M&L for vitrified ceramic tiles 10mm thick (light shade, Square/ rectangular) polished area of each tiles exceeding n.exc 0.36 sqm in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed as in CM 1:6, complete all as specified and directed. |
| 9 | M&L for vitrified skid ceramic tiles 10mm thick (light shade, Square/ rectangular) polished area of each tiles exceeding n exc 0.36 sqm in vertical surface such as in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick backing coat in cement mortar 1:4 complete. |
| 10 | Demolition of Stone slabs and tiles of any description or thickness laid, bedded and pointed in any mortar in floors, aprons, cooking platform etc., complete all as specified and directed. |
| 11 | M&L for 18-20mm thick granite (of any type) work (table rubbed and polished) in pillar/ vertical surface, cooking platform and like in 15 thick screed bed cement mortar 1:4 including edges of stones slabs one edges such as cooking steps or etc,moulding, pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite, complete all as specified and directed. |
| 12 | M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations, complete all as specified and directed. |
| 13 | S&F 1.5mm thick PVC tiles/ sheets, laminated plain coloured, marbled mosaic or mottled finish, homogeneous laid with approved rubber based adhesive in floors complete all as specified and directed. |
| 14 | Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) of any description and in any position not otherwise specifically provided, complete all as specified and directed. |
| 15 | M&L for reinforced cement concrete 1:2:4, (nominal mix), type B-1, using 20 mm graded crushed stone aggregate as in columns/ beams/ slab, landings and in shelves, complete all as specified and directed. |
| 16 | S&F mild steel TMT bar 10 mm dia and over cut to length bent to shape required including cranking, binding spirally for hooping, for columns, hooking end and binding with MS wire annealed not less than 0.9mm dia or secure with clips, complete all as specified and directed. |
| 17 | Use&waste of formwork to chajjas, slab, chullah hoods, troughs and similar items including edges rough finished surfaces, complete all as specified and directed. |
| 18 | Taking down cement or cement lime plaster, of any description incl tiling etc., complete all as specified and directed. |
| 19 | M&L for rendering 15 mm thick in CM 1:6 on brick work or concrete surfaces finished even and smooth (without using extra cement) complete all as specified and directed. |
| 20 | M&L for rendering work 15 mm thick on fair surfaces of brickwork or concrete surfaces (1:4) finished even and smooth (without using extra cement), complete all as specified and directed. |
| 21 | M&L for preparation of newly plastered surface of wall & applying two coats of oil bound distemper over a coat of 3mm thick wall care putty on walls, complete all as specified and directed. |
| 22 | M&L for applying two or more coats of 100% Premium acrylic emulsion paint (weather proof paint on external surfaces) having VOC less than 50gm/liter and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 liter/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 liter/ 10 sqm over new surfaces at any height of building / tower complete all as specified and directed. |
| 23 | Dismantling wall and ceiling boards or insulation boards any thickness, any description including cover fillets, complete all as specified and directed. |
| 24 | M&L for solid PVC wall/ ceiling lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing incl necessary beading work, incl same board beading for joint sealed, complete all as specified and directed. |
| 25 | M&L for exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fiber for fixing in 600x600mm, 6mm thick grid (frame work for ceiling shall be measured and paid separately) complete all as specified and directed. |
| 26 | M&L for GI frame work powder coated work of size 605 x 605 mm for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30mm and web of 27mm fixed to surrounding wall using nylon sleeves and screws at 450mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx. 900 mm centre to centre with GI cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre, complete all as specified and directed. |
| 27 | M&L for hangers 6 mm dia G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40x3mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long, complete all as specified and directed. |
| 28 | S&F 4mm veneered decorative teak plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with screws/ adhesive solution to plywood/flush door shutter and polished with two coats of PU polish of approved brand and shade over a base coat of wood sealer, including all sanding and surface preparation to achieve a smooth and uniform finish as in wall paneling complete all as specified and directed. |
| 29 | S&F 9 mm plywood grade BWR type BB fixed with screw to timber frame as in wall paneling, complete all as specified and directed. |
| 30 | Demolition of brick or stone masonary built in cement mortar incl all quoins arches, pillars, etc but excluding ashlar facing, dressed stone work and precast concrete articles, at any height complete all as specified and directed. |
| 31 | M&L for brick work with old size kiln burnt sub class 'B' bricks, straight or curved on plan exc 6 m in mean radius, built in CM 1:6, complete all as specified and directed. |
| 32 | M&L for brick work with sub class 'B' brick, straight or curved on plan to any radius in half brick thick wall built in cement mortar 1:6, complete all as specified and directed. |
| 33 | M&L for walling of random rubble stone masonry, brought upto courses, well bonded, bedded and solidly hearted built in cement mortar 1:6 including raking or cutting out joints complete all as specified and directed. |
| 34 | Dismantling plain or corrugated steel sheeting, with ridge, gutters, etc, any gauge, and thickness incl Nainital or similar pattern roof covering, fixed with J/L hooks or coach screws, complete all as specified and directed. |
| 35 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, complete all as specified and directed. |
| 36 | S&F pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, eaves board, valley gutter fixed with self tapping screws, complete all as specified and directed. |
| 37 | S&F 0.50mm thick prepainted aluminium zinc coating liner profile high strength steel sheet is an attractive ,slightly fitted wall & ceiling cladding for exterior and interior use, on straight or curved surface, complete all as specified and directed. |
| 38 | Dismantling wrought iron or mild steel work of any description not otherwise provided, complete all as specified and directed. |
| 39 | Dismantling timber scantlings ,framed/unframed work of size 40 sqcm and over in section ,in any position etc complete all as specified. |
| 40 | M&L for 2nd class hardwood clean Sawn timber scantling/ posts, complete all as specified and directed. |
| 41 | S&F roof trusses (framed) trussed, purlins, posts, crane gantries, rails and fastening and heavy bracket framing, Beam, tee, angle, channel or flat sections) including distance pieces cleats Fe 410-W, Gde-E-250, quality-A, etc., complete all as specified and directed. |
| 42 | S&F framed work such as grills, gratings, ornamental gates, etc., with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors, ladder, framed baluster, walk ways, railing, framework of water tanks staging and similar work conforming to Fe-290, Gde-E-165, complete all as specified and directed. |
| 43 | M&L for preparation of new steel surface of any description over 10cm in width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. |
| 44 | M&L for hacking out old broken glass (any thickness, size, quality or description) from wooden frames, glazed with putty or fixed with beads, of any height including necessary scaffolding and T&P required to complete the work, complete all as specified and directed. |
| 45 | S&F sheet glass ordinary quality 4 mm thick glazing in square/ rectangle n.exc 0.50 sqm each pan with oil putty or aluminium beads fixed to steel and wooden at any height including necessary scaffolding and T&P required to complete the work, complete all as specified and directed. |
| 46 | S&F sheet glass 4.00mm thick figured glass pin headed type and glazing with oil putty or wooded bead built in squares not exceeding 0.5 sq.m in each pane, at any height including necessary scaffolding and T&P required to complete the work, complete all as specified and directed. |
| 47 | S&F sheet glass 5.5mm thick glass in square exc 0.5 sqm in each pane, at any height including necessary scaffolding and T&P required to complete the work complete all as specified and directed. |
| 48 | Taking down chowkhat or frames with shutters without taking off shutters from the frames) n exc 1.5 Sqm each, complete all as specified and directed. |
| 49 | Taking down chowkhat or frames with shutters without taking off shutters from the frames) exc 1.5 Sqm and n exc 4Sqm each, complete all as specified and directed. |
| 50 | Taking down shutters of any description exc 1 Sqm and n exc 2 Sqm each complete all as specified and directed. |
| 51 | Taking down shutters of any description exc 1 Sqm but n exc 2 Sqm each and refixing in the same opening, complete all as specified and directed. |
| 52 | S&F second class hardwood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed. |
| 53 | S&F providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, complete all as specified and directed.Note: Stainless steel butt hinges and necessary S.S screws shall be paid separately. |
| 54 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 85 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge and making it good to match with existing surface, complete all as specified and directed.Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 55 | S&F anodized powder coated (powder coating color/shade as approved by GE) aluminium frame/shutters for doors, windows, ventilators of powder coating minimum thickness of powder coating 50 micron with one or more rebates including joining cleat for fixing and cleat for receiving glass/ wire mesh etc. complete all as specified and directed. |
| 56 | S&F aluminium anodised powder coated sliding type two/three track window with shutter and frame including aluminium grill and mosquito proofing net and 5 mm thick tinted glass, size of frame 93.00x31.75x1.3 mm thick for top and sides, 93.00x31.75x1.3 mm thick, bottom and shutter frame 38 x 18 x 1.5 mm thick., Aluminium grill 6 mm dia design No DG-102 make DEDO grill or design No A-103 make aluminium grill fixed to 50 x 20 x 1.5mm thick including necessary handles, tower bolts, stopper etc., complete all as specified and directed. |
| 57 | S&F aluminum section powder coated (powder coating color/ shade as approved by GE) of colour as approved door with frame and shutters partially gauze and PVC composite board 5mm thick fixed with aluminium clip section door section of aluminium door shutter. |
| 58 | S&F 30mm flush shutters, solid core construction, with block board core and plywood face panels, commercial types on both sides incl teak wood beading around the shutters, complete all as specified and directed. |
| 59 | S&F glazed and skeleton shutters 35mm thick 2nd class Hard wood open rebated and prepared to receive glass, gauge etc. without sash bars edges of frame plain, chamfered or rounded fitted with cut and mitered beads for securing glass etc. sized of members of shutter with three number of panels, complete all as specified and directed. |
| 60 | S&F 2nd class hard wood 30mm thick made glazed and skeleton shutters open rebated and prepared to receive glass, gauze,etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass,etc, size of members of window shutters as specified in SSR Part-1, complete all as specified and directed. . |
| 61 | S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinted tacks or galvanised wire staples fixed with wooden beading complete all as specified and directed. |
| 62 | S&F in repair galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinted tacks or galvanised wire staples fixed with wooden beading complete all as specified and directed. |
| 63 | Dismantling timber scantlings framed work in fillets, frame work of cup board, rails, posts rafters, purlins, etc under 40 sqcm in section in any position with nails etc., complete all as specified and directed. |
| 64 | M&L for plain fillets of second class hard wood, square, rectangular or triangular in section, clean sawn, secured with nails or brads; sectional area exceeding 13 Sqcm but not exceeding 25 Sqcm, complete all as specified and directed.. |
| 65 | M&L for chamfers, splays, grooves, rebates, rounded angles, rounded nosings, tongued and grooved edges (each tongue and each groove measured) etc., Mouldings n exc 75mm girth on softwood, complete all as specified and directed. |
| 66 | Dismantling boarding any description, fixed in any position with nails for cupboards, complete all as specified and directed. |
| 67 | S&F 18/19mm thick, block board, grade 2 quality interior grade, commercial type, fixed with screws timber frame work, complete all as specified and directed. |
| 68 | S&F 0.90mm thick decorative laminated sheet type I of surface finish, colour and pattern as approved fixed with adhesive as per manufacture instruction, complete all as specified and directed. |
| 69 | S&F continuous piano hinges mild steel bright finish or electro galvanised with open flap width 30mm, fixed with screw, complete all as specified and directed. |
| 70 | S&F D-type cabinet handles premium quality, stainless steel 304/ gloss chrome/ SN finished 150mm long matt finished complete fixed in position, complete all as specified and directed. |
| 71 | S&F magnetic catches 75 mm brass body for use in cup boards of kitchen, ward robes etc., complete all as specified and directed. |
| 72 | S&F mild steel heavy duty telescopic soft close slide full extension ball bearing drawer slides of size 18 inch(silver) for use in cup boards of kitchen, ward robes etc. complete all as specified and directed. |
| 73 | M&L for preparation of new wooden surfaces not otherwise described, over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. |
| 74 | S&F mild steel sliding door bolts plate type stove enameled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate 250mm long, complete all as specified and directed. |
| 75 | S&F 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and directed. |
| 76 | S&F aluminium extruded alloy handles fabricated type anodised 125mm long complete all as specified and directed. |
| 77 | S&F aluminium extruded alloy handles fabricated type anodised 100mm long complete all as specified and directed. |
| 78 | S&F butt hinges medium weight cold rolled mild steel powder coated of 100mm size complete all as specified and directed. |
| 79 | S&F aluminium anodized barrel tower bolt of extruded section of size 200mm long complete all as specified and directed. |
| 80 | S&F aluminium anodized barrel tower bolt of extruded section of size 150mm long complete all as specified and directed. |
| 81 | S & F in repairs floor door stoppers 140mm of aluminium alloy body and tongue , anodised with hard drawn steel spring fixed in floors complete all as specified and directed. |
| 82 | Taking up or down 15mm bore, steel water tubing & connections complete all as specified and directed. |
| 83 | Taking up or down 20 bore, steel water tubing & connections complete all as specified and directed. |
| 84 | M&L for cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girt complete all as specified and directed. |
| 85 | S&F steel water tubing medium grade galvanised with all fittings and fixed complete to walls, ceiling or laid in floors of 15mm bore complete all as specified and directed. |
| 86 | S&F steel water tubing medium grade galvanised with all fittings and fixed complete to walls, ceiling or laid in floors of 20mm bore complete all as specified and directed. |
| 87 | S&F in repair rotational moulded polyethylene water storage tanks 500 ltrs capacity (cylindrical Vertical with closed top) hoisted and fixed in position all as specified in SSR Part 1 etc complete including 20mm dia float valve and dismantling of existing tank, complete all as specified and directed. |
| 88 | S&F in repair rotational moulded polyethylene water storage tanks 1000 ltrs capacity (cylindrical Vertical with closed top) hoisted and fixed in position all as specified in SSR Part 1 etc complete including 20mm dia float valve and dismantling of existing tank, complete all as specified and directed. |
| 89 | S&F in repair 20mm ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screw for iron pipe mini weight for 210 gms, complete all as specified and directed. |
| 90 | S&F 21-22 inch dia galvanised mild steel pan mortar (Tasla/ ghamela) not less than 1mm thick with for 04 Nos bolt of 5-6mm dia with 8 Nos nut bolt with 8 Nos washer including fixing on water storage tank as tank cover, complete all as specified and directed. |
| 91 | M&L for cleaning and removing all scale and dirt etc. from tanks and from mounts of circulating pipes etc. capacity of tanks exc. 250 Ltr and nexc. 500 ltr complete all as specified and directed.Note : Any damage to Float valve, pipe etc shall be make good by the contractor. |
| 92 | M&L for cleaning and removing all scale and dirt etc. from tanks and from mounts of circulating pipes etc. capacity of tanks exc. 500 Ltr and nexc. 1000 ltr complete all as specified and directed.Note : Any damage to Float valve, pipe etc shall be make good by the contractor. |
| 93 | S&F in repair 20mm dia stop valve, cast copper alloy, screwed down, high pressure with crutch or butter fly handle screwed both ends for Iron pipe or for unions and fixed, complete all as specified and directed. |
| 94 | S&F in repair 15 mm dia Angle/stop cock cast copper alloy, fancy type chromium plated screwed down high pressure, complete all as specified and directed. |
| 95 | S&F in repair 15mm bore CP bib tap fancy type long body cast copper alloy with capstan head handle screwed for iron pipe or for brass ferrule, complete all as specified and directed. |
| 96 | S&F in repair 15mm brass CP wall mixer for mixing hot and cold water with telephonic shower, complete all as specified and directed. |
| 97 | S&F in repair 15mm brass CP wash hand basin/ kitchen sink mixer for mixing hot and cold water, complete all as specified and directed. |
| 98 | S & F in repair sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 99 | S&F health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and fixed in position, complete all as specified and directed. |
| 100 | S&F in repair brass chromium plated tubular towel rail, 20mm dia, D type, 60 cm long between flanges, complete all as specified and directed. |
| 101 | S&F 15mm size PVC connection pipe with PTMT nuts of length 600mm long, complete all as specified and directed. |
| 102 | S&F in repair 32mm dia PVC waste pipe for wash hand basin and kitchen sink of length 900mm long with PTMT nuts, complete all as specified and directed. |
| 103 | S&F in repair vitreous china wash down water closet (pedestal pattern) coloured including all fittings, fixing bolts, (P or S trap) and flush pipe, complete all as specified and directed. |
| 104 | S&F in repair vitreous china wash basin pedestal pattern super white/ colour of size 560x475mm including all fittings complete, decorative type, complete all as specified and directed. |
| 105 | S&F in repair vitreous china squatting pan, Orissa, pattern, size 580 x 440 mm white with integral foot rest including trap set and including concrete complete including making good to floor etc(excluding flushing cistern and flush pipe, complete all as specified and directed. |
| 106 | S&F PVC low level flushing cistern 10 Ltr capacity valve less symphonic action type white as approved with inlet ball valve flat back & handle including brackets, complete all as specified and directed. |
| 107 | S&F in repair wash basins, vitreous china (flat back or angle back type) size 550x400mm white, incl cutting for & pinning in ends of brackets or erecting stand, brackets, CP brass waste coupling complete all as specified and directed. |
| 108 | S&F 600mmx450mm beveled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 109 | S&F in repair 25mm dia stainless steel chromium plated curtain rails fixed with brackets, stops, rollers, etc., complete all as specified and directed. |
| 110 | S&F in repair stainless steel plate rack (utensil rack for kitchen of size 900 x 750 x 250mm and min 0.80 to 1.00 mm thick fixed with stainless steel screw and rawl plug, complete all as specified and directed. |
| 111 | S&F in repair sink with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and waste coupling/waste pipe; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915x460mm bowl size 410x330x160mm, complete all as specified and directed. |
| 112 | M&L for 75mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement complete all as specified and directed. |
| 113 | S&F 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 114 | S&F 110mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 115 | S&F PVC SWR Bends in any radius 110 mm bore with access door complete all as specified and directed. |
| 116 | S & F PVC SWR Bends in any radius 75 mm bore with access door complete all as specified and directed. |
| 117 | M&L for water proofing treatment of sunken floor of WCs, Bathroom etc. by applying of the following specifications:-(i) Cleaning of sunken floor surface with mechanical means i.e. wire brush/air blower etc.and remove all loose/unsound material, dirt, dust, etc.(ii) Applying cement slurry mixed with acrylic based polymer modified cementitious composite compound coating Hydro proof Xtra of FOSROC/ Equivalent of Dr Fixit of pidilite industries Ltd in the ration of 1:2:4 (One part of acrylic polymer: Two part of water and four part of cement).(iii) First layer of cement slurry @ 0.444 Kg/Sqm mixed with acrylic based modified cementious composite compound @ 0.222 Liter/Sqm and allow it to air dry for 04 Hours.(iv) Second layer of cement slurry @ 0.222 Kg/Sqm mixed with acrylic based modified cementious composite compound @ 0.111 Liter/Sqm and allow it to air dry for 04 Hours followed with water curing for 48 hours.(v) 200 micron thick polythene film shall be pasted with help of adhesives over treatment. (vi) Supply & fix of spout pipe 40mm dia GI pipe medium grade, 450m long (for draining out the water).Note:- Joints of WC/Trap/Soil waste shall be properly sealed with sealing compound. Testing of all traps and joint and sunken slab shall be done as per IS-1742 before filling and tiling work. |
| 118 | M&L for PCC 1:4:8, type D-2, using 40mm graded crushed stone aggregate, as in filling of mass concrete for floors, complete all as specified and directed. |
| 119 | M&L for PCC 1:2:4, type B-1, using 20mm graded crushed stone aggregate as in seismic and other similar bands, shelves, copings, bed plates, hold fasts, plinth courses, filling in pressed steel frame and the like finished fair and even incl necessary form work, complete all as specified and directed. |
| 120 | M&L for PCC 1:3:6, type C-2, using 40mm graded crushed stone aggregate as in surface channel/ drains incl fair finishes & necessary formwork, complete all as specified and directed. |
| 121 | M&L for preparation of plastered or unplastered old decorated surfaces of walls incl pilasters and cornices etc. incl washing, rubbing down and stopping the connected previously treated surfaces and applying two coat of oil emulsion distemper (tint as approved by GE) incl wherever required fillings of gaps, holes, patches with wall care putty of existing surface with sand paper or iron patti/ flat, complete all as specified and directed. |
| 122 | M&L for preparation of plastered or unplastered old decorated surfaces of walls incl pilasters and cornices etc. incl washing, rubbing down and stopping the connected previously treated surfaces and applying two coat of oil emulsion distemper (tint as approved by GE) incl wherever required fillings of gaps ,holes, patches with wall care putty of existing surface with sand paper or iron patti/ flat, complete all as specified and directed. |
| 123 | M&L for preparation of old painted wood or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint (1st quality), complete all as specified and directed. |
| 124 | M&L for preparation of old painted steel surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint (1st quality), complete all as specified and directed. |
| 125 | M&L for preparation of plastered or unplastered old decorated surfaces with sand papering of walls incl cornices etc. incl washing, rubbing down and stopping the connected previously treated surfaces and applying two coat of acrylic emulsion exterior quality (Apex painting) (tint as approved by GE), complete all as specified and directed. Please Enable Macros to View BoQ information |
