|
| 1 | Taking down chowkhats with shutter (without taking of shutter from the frame) exc.1.5 Sqm but n.exc 4.0 Sqm each and removing from site complete all as spd and directed. |
| 2 | Taking down chowkhats with shutter (without taking of shutter from the frame) n.exc.1.5 Sqm each and removing from site complete all as specified and directed. |
| 3 | Taking down shutter of any description exc.1.00 sqm. but n.exc. 2.00 sqm each complete all as specified and directed. |
| 4 | Taking down shutter of any description n.exc. 1.00 sqm each complete all as specified and directed. |
| 5 | Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing tiles and rubbish off the premises complete all as specified and directed. |
| 6 | Demolition of stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness in floors, aprons etc. complete all as specified and directed. |
| 7 | Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided including removal of rubbish from the site complete all as specified and directed. |
| 8 | Dismantling structural steel work including doors, gates but excluding framed truss etc. complete all as specified and directed. |
| 9 | Dismantling timber scantlings in framed work 40 sqcm and over in section, in any position complete all as specified and directed. |
| 10 | Taking down of 110/75 mm bore PVC (SWR) pipes including all fittings fixed in any position complete all as specified and directed. |
| 11 | Material and labour for repairs to uneven surface of concrete and reinforcement from drop of fins, facias, chajjas using necessary scaffolding and making good disturbed portion with rendering in cement plaster, 10mm thick in cement mortar (1:3) and finished the surface even and smooth without using extra cement complete all as specified and directed. |
| 12 | Material and labour for 2nd class hard wood plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and directed. |
| 13 | Supply and fix 30mm thick flush shutters, solid core construction, with block board core and both faces covered with decorative face veneer with lipping/frame to match the shade complete all as specified and directed. |
| 14 | Supply and fix solid PVC door frame of size 50 mm X 47 mm made out of 5 mm plain coloured PVC sheet reinforced with mild steel square tube as per specification and drawing given on MES schedule Part-II (2020) complete all as specified and directed. |
| 15 | Supply and fix factory made PVC door shutters 30mmm thick (style) consisting of frame made of MS tube for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20 mm width Stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement, supplying and fixing in the frame at site as per specification and drawing given on MES schedule Part-II (2020) complete all as specified and directed. |
| 16 | Supply and fix factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45X85 mm comprisingof virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance tospread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 17 | Supply and fix factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws complete all as specified and as directed.(Note: stainless steel butt hinges shall be paid separately) |
| 18 | Supply and fix 35mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided in to square with plain, chamfered or rounded, mitred and rebated sash bars, any numbers), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed. |
| 19 | Supply and fix mild steel framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and directed. |
| 20 | Supply and fix 1mm thick mild steel, plain, black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required complete all as specified and directed. |
| 21 | Supply and fix Powder coated (any colour) aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and directed. |
| 22 | Supply and fix Powder coated (any colour) aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and directed. |
| 23 | Supply and fix anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design / pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening complete all as specified and directed. |
| 24 | Supply and fix solid PVC wall lining consisting of 5mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC /Aluminium frame complete all as specified and directed. |
| 25 | Supply and fix in repair door closer hydraulically regulated aluminium (extruded section body), designation No 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed. |
| 26 | Supply and fix in repair false ceiling with powder coated exposed GI grid suspension system (E-grid T-2430 or equivalent load carrying capacity- 12.50 Kg/sqm with mid span deflection n. exc. 1/360 span with hanger spacing of 1200mm c/c) consisting of main runner 3600mm long of size- 24x38mm x 0.25mm thick, cross tee of section size- 24x27mm x 0.25mm thick 1200mm/600mm long and wall angle of section size 22x22mm x 0.4mm thick. The wall angle shall be fixed on PVC dash fasteners on the perimeter of the wall by steel screws with distance 300mm c/c. The main runners to be placed @ 1200mm, The cross tee 1200mm will be inserted in pre-cut slots of main runner at a regular interval of 600mm to form a modular grid of 1200mmx600mm. Additional cross tee of 600mm shall be placed perpendicular to the cross tee1200mm long to finally form a grid of 600mm x 600mm shall be supported by 6mm dia G.I. wire from perlins/soffits. 4mm thick high pressure steam cured non Asbestos fibre cement designer ceiling board (density> 1200kg/cum, modules of rupture (M.O.R)-15.85 Mpa, thermal conductivity (k)-0.0872 W/mk) of size 595mm x 595mm, confirming to IS 14862 & type B catagory III of ISO 8336-1993, (Reaction of fire-A2 -s1-d0) tested as per EN 13501 Part-I & BS-476 part-4, 5, 6 & 7, should be placed in the grid module to form a false ceiling complete all as specified and directed.Make: Armstrong/ Saint Gobain/ Lafarge/ Everest. |
| 27 | Material and labour for 25mm thick PCC (1:2:4) type B-0 (using 12.50mm graded stone aggregate) as in levelling course for laying floor finishes complete all as specified and directed. |
| 28 | Material and labour for 40mm thick PCC (1:2:4), type B-1, (using 20mm graded stone aggregate) as in floor including finish the surface even and smooth without using extra cement complete all as specified and directed. |
| 29 | Material and labour for vitrified ceramic tiles (premium quality) 8 to 10mm thick, light shade as approved, polished area of each tiles n. exc. 0.36 Sqm (square/ rectangular) in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed. |
| 30 | Material and labour for ceramic, non skid coloured tiles (premium quality) 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11sqm but not exc. 0.18sqm as in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in cement mortar (1:6) complete all as specified and directed. |
| 31 | Material and labour for glazed ceramic tiles of size 400x300x7 mm or 300x200x7mm (premium quality) coloured in vertical surfaces such as riser of steps, skirting, dado and pillar set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 10mm thick cement plaster in cement mortar (1:4) complete all as specified and directed. |
| 32 | Material and labour 75mm thick PCC (1:4:8), type D-2 (using 40 mm graded stone aggregate) as in sub-base or base course of floor complete all as specified and directed. |
| 33 | Material and labour for joint free anti skid outdoor coloured pavement tiles (good grip series) of size 300 mm x 300mm x 10mm thick, coloured, set jointed and pointed in neat cement slurry with grey cement & pigment as in floor, path etc. and including 20mm thick screed bed in cement mortar (1:6) complete all as specified and directed. |
| 34 | Material and labour for providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc. of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed. |
| 35 | Supply and fix in repair Vitreous china wash basin white flat back size 550 x 400mm including cutting for and pinning in ends of brackets or erecting stand including 32mm dia brass chromium plated waste fittings for glazed ware sinks, basin with long screws shanks and fly nuts flange end bedded in red lead cement and other end fixed including 15mm bore fancy type pillar tap cast copper alloy with capstan heads, chromium plated, screwed down, high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe and 800mm long PVC waste pipe complete all as specified and directed |
| 36 | Supply and fix in repair vitreous china white squatting pan of ‘Orissa’ pattern, size 580 x 440mm with integral foot rests including ‘P’ or ‘S’ trap, (excluding flushing cistern and flush pipe), including provn of cement concrete bedding (1:5:10) type E1 (using 20mm graded stone aggregate) complete all as specified and directed |
| 37 | Supply and fix in repair vitreous china wash down water closet pan (pedestal Pattern) white (excluding fixing bolts flusing cistern and flush pipe) including connection to drain (or out going pipe) and to flush pipe anti syphonage pipe including P or S trap fixed on floor and including plastic water closet seat, white, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 38 | Supply and fix in repair 10 litre PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets including flushing pipe complete all as specified and directed. |
| 39 | Supply, hoist and fix 500 litre capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of old unseviceable existing tank complete all as specified and directed. |
| 40 | Supply, hoist and fix 1000 litre capacity rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I including dismantling of old unseviceable existing tank complete all as specified and directed. |
| 41 | Supply and fix 20 mm bore steel tubes medium grade, galvanised, with all fitting and fixed to walls, ceilings, roofs or laid in floors including taking down existing unserviceable GI pipe complete all as specified and directed. |
| 42 | Supply and fix 15 mm bore steel tubes medium grade, galvanised, with all fitting and fixed to walls, ceilings, roofs or laid in floors including taking down existing unserviceable GI pipe complete all as specified and directed. |
| 43 | Supply and fix in repair PVC water tank cover (threaded or lockable) suitable for 500ltr/1000ltr capacity water tank, fixed at any position and upto G+4 storey roof complete all as specified and directed |
| 44 | Supply and fix PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed . |
| 45 | Supply and fix PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed . |
| 46 | Supply and fix PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed . |
| 47 | Supply and fix PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints laid in trenches or in floors complete all as specified and directed . |
| 48 | Supply and fix 110mm bore PVC (SWR) junction single (single T) equal or unequal provided with access door complete all as specified and directed. |
| 49 | Supply and fix 110 mm bore PVC (SWR) bends with access door any radius complete all as speified and directed. |
| 50 | Cutting holes into or through brick walls built in cement mortar and making good in cement mortar (1:3) or cement concrete (1:2:4) type B-1 as require superficial area not exc 150 sqcm complete all as specified and directed. |
| 51 | Supply and fix 75mm bore PVC (SWR) bends of any radius complete all as specified and directed . |
| 52 | Supply and fix 75mm bore PVC (SWR) junction single (single T) equal or unequal complete all as specified and directed. |
| 53 | Supply and fix in repair 20mm dia ball valve high pressure high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed (minimum weight 210 gm) complete all as specified and directed. |
| 54 | Supply and fix in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and direted. |
| 55 | Supply and fix in repair 600x450mm bevelled edge mirror of selected quality glass 5 mm thick, mounted on 6 mm thick commercial ply wood, aluminium frame and fixed to wooden plugs with chromium plated brass screw and cup washers complete all as specified and directed. |
| 56 | Taking down cement plaster of any description built in cement mortar on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc. and removing debrish from site complete all as specified and directed. |
| 57 | Material and labour for brick work with fly ash brick, modular size, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) including demolition of brick work or stone boulder masonry, built in cement mortar including all quoins, arches, pillars etc. and removing of unserviceable material from site complete all as specified and directed. |
| 58 | Material and labour for 15mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar (1:4) and finish the surfaces even and smooth without using extra cement as in wall complete all as specified and directed. |
| 59 | Material and labour for 10mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar (1:6) and finish the surfaces even and smooth without using extra cement as in wall complete all as specified and directed. |
| 60 | Material and labour for 5mm thick rendering on concrete surfaces in cement mortar (1:3) and finish the surfaces even and smooth without using extra cement as in ceiling complete all as specified and directed. |
| 61 | Material and labour for precast cement concrete (1:2:4) type B0 (12.5 mm graded agregate) louvres and jallies, 25mm thick (measured solid), including all mouldings set jointed and pointed in cement mortar (1:4) including necessary formwork after demolition of old existing unserviceable louvres and jallies complete all as specified and directed. |
| 62 | Material and labour for preparation of new plastered surfaces of walls and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming one coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed. |
| 63 | Material and labour for preparation of new plastered surfaces of walls and applying two coats of acrylic washable distemper over a coat of alkali resistance primer complete all as specified and directed. |
| 64 | Material and labour for preparation of new plastered surfaces of ceiling and applying three coat of white wash complete all as specified and directed. |
| 65 | Material and labour for preparation of old decorated surfaces of walls and applying one coat of acrylic washable distemper complete all as specified and directed. |
| 66 | Material and labour for complete removal of existing treatement on old decorated surfaces of walls and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming one coat of exterior primer applied @ 0.90 litre/ 10 sqm including preperation of surface complete all as specified and directed. |
| 67 | Material and labour for preparation of old decorated surfaces of wall and applying one coat of white wash complete all as specified and directed. |
| 68 | Material and labour for welding in reapirs n.exc 2.5 cm in length and thickness of metal to be welded exc 6mm but n.exc 9mm thick complete all as specified and directed.Note : Scaffolding and necessary form work shall be deemed in item rate for G+4 storey bldgs. |
| 69 | Supply and fix in repair stainless steel 20mm dia curtain rod, fancy type with side and end holders and MS brackets fixed in brick /concrete wall with screws complete all as specified and directed. |
| 70 | Material and labour for 2nd class HW plain fillets, square, rectangular or trangular in section, wrought, chamfered or rounded screwed with nails or beads sectional area exc 13 & n.exc 25 Sqcm. complete all as specified and directed. |
| 71 | Material and labour for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 72 | Material and labour for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 73 | Supply and fix in repair mild steel 300mm long ordinary rat tail rod pattern spring including roller and roller plate complete all as specified and directed. |
| 74 | Supply and fix 4 mm thick sheet glass ordinary quality and glazing with oil putty or wooden/ aluminium rubber beads, nails etc in square not exc 0.5 sqm in each pane including hacking out old broken glass complete all as specified and directed.Note : Scaffolding and necessary form work shall be deemed in item rate. |
| 75 | Supply and fix 4 mm thick sheet glass ordinary quality and glazing with oil putty or wooden/ aluminium rubber beads, nails etc in square exc 0.5 sqm in each pane including hacking out old broken glass complete all as specified and directed.Note : Scaffolding and necessary form work shall be deemed in item rate. |
| 76 | Supply and fix 5.5 mm thick sheet glass ordinary quality and glazing with oil putty or wooden/ aluminium rubber beads, nails etc in square exc 0.5 sqm in each pane including hacking out old broken glass complete all as specified and directed.Note : Scaffolding and necessary form work shall be deemed in item rate. |
| 77 | Supply and fix stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or nut bolt or aluminium beads complete all as specified and directed. |
| 78 | Supply and fix in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or nut bolt or aluminium beads complete all as specified and directed. |
| 79 | Supply and fix 100mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 80 | Supply and fix in repair 100mm size butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 81 | Supply and fix 75mm size stainless steel butt hinges, medium weight complete all as specified and directed. |
| 82 | Supply and fix in repair 75mm size stainless steel butt hinges, medium weight complete all as specified and directed. |
| 83 | Suplly and fix 150 mm long aluminum anodised barrel tower bolts cast type complete all as specified and directed. |
| 84 | Suplly and fix in repair 150 mm long aluminum anodised barrel tower bolts cast type complete all as specified and directed. |
| 85 | Supply and fix 150mm long alluminium handles, cast type, anodized complete all as specified and directed. |
| 86 | Supply and fix in repair 150mm long alluminium handles, cast type, anodized complete all as specified and directed. |
| 87 | Suplly and fix 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy complete all as specified and directed. |
| 88 | Suplly and fix in repair 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy complete all as specified and directed. |
| 89 | Resecuring or easing and adjusting without taking down shutters for easy closing / opening, end tightening of butt hinges in position, adjustement of butt hinges in position, adjustement of existing iron mongry, size of shutter exc 1 sqm but n. exc 2 sqm each complete all as specified and directed. |
| 90 | Taking down shutters exc 1.00 Sqm but not exc 2.00 Sqm carefully from the frame and refixing in the same opening after necessary repair including easing, welding or any required item such as stay handle etc. and making good the existing surface complete all as specified and directed. |
| 91 | Repair/adjusting aluminium door for holding in position to shutters in frame including replacing of old damaged adjusting bolts, cleats, rubber gas- kits, screws and aluminium sections less than 1kg for each shutters and making proper functionable to aluminium doors/windows complete all as specified and directed. |
| 92 | Supply and fix in repair mortice lock, vertical type, size 100 mm, two levers (vertical type), brass body complete all as specified and directed. |
| 93 | Taking down steel rolling shutter of any description and size of opening exc 3 sqm but n exc 6 sqm including all components/parts (except guide channel and bracket plates) from position and greasing, oiling all serviceable parts and refixing in same/exisiting position complete all as specified and directed. |
| 94 | Supply and fix in repair safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed. |
| 95 | Supply and fix in repair ball bearing for rolling shutters complete all as specified and directed. |
| 96 | Supply and fix in repair 32 mm bore PVC corrugated waste pipe 800mm long complete all as specified and directed. |
| 97 | Supply and fix in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed. |
| 98 | Supply and fix in repair stainless steel plate rack 0.85mm thick of size 914x786x254mm complete all as specified and directed. |
| 99 | Supply and fix in repair soap dish, brass chromium plated, fancy type, fixed to plugs with chromium plated fixed with brass screws complete all as specified and directed. |
| 100 | Supply and fix in repair 5.5mm thick glass corner shelf of size 300 x 300mm with stainless steel railing fixed with chromium plated screws complete all as specified and directed. |
| 101 | Supply and fix in repair 15 mm bore CP fancy type stop valves cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both,ends for iron pipe or for unions and fixed complete all as specified and directed. |
| 102 | Supply and fix in repair 15 mm bore bib taps fancy type cast copper alloy chromium plated with crutch or handles screwed down, screwed for iron pipes complete all as specified and directed. |
| 103 | Supply and fix in repair 15 mm bore angle cock fancy type cast copper alloy chromium plated with crutch or handles screwed down, screwed for iron pipes complete all as specified and directed. |
| 104 | Supply and fix in repair 15 mm bore PVC connection pipe 600mm long with PTMT nuts at both ends complete all as specified and directed. |
| 105 | Supply and fix in repair 15mm bore fancy type pillar tap cast copper alloy with capstan heads, chromium plated, screwed down, high pressure with or without lettered hot or cold with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and directed. |
| 106 | Supply and fix in repair 15mm bore brass CP basin mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed. |
| 107 | Supply and fix in repair grating doom 100mm dia of PTMT (minimum weight 25 gms) complete all as specified and directed. |
| 108 | Refixing, securing, erecting only in repair with self tapping screws including minor mason work and filling of holes etc with concrete and making good of existing 0.50mm thick pre-painted galvalume aluminium zinc coating GI based plain/corrugated steel sheet as in roof covering/cladding to wall or in any position and in patch works complete all as specified and directed. |
| 109 | Supply and fix in repair 0.50mm thick pre-painted galvalume aluminium Zinc coating GI based corrugated / semi corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as per manufacturer instruction complete all as specified and directed. |
| 110 | Supply and fix mild steel works as in hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed. |
| 111 | Supply and fix in repair solid PVC wall lining consisting of 5 mm thick wood grain printed colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed. |
| 112 | Supply and fix 5mm thick PVC sheet fillet of width 35 mm for wall panelling inclusive of fixing on to wall to make PVC frame complete all as specified and directed. |
| 113 | Supply and fix in repair door stopper 150mm long cover plate, aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed to shutter complete all as specified and directed. |
| 114 | Material and labour for 20mm thick jet black granite for top shelves (of any type) work (table rubbed and polished) in cupboard shelves, steps, jambs, window cills, cooking platforms and like in cement mortar (1:4) including pointing, grooving to wall etc with white cement using marble dust with admixture of pigment to match with shade of granite including moulding/nosing fixed independently complete all as specified and directed. |
| 115 | Material and labour for machine cut cudappah stone slab 20-25mm thick as in shelf including rubbing and polishing including taking down existing shelf complete all as specified and directed. |
| 116 | Material and labour for anti-termite treatement for treating the soil along with external perimeter of building at the rate of 2.25 litre of emulsion per metre of the perimeter wall complete all as specified and directed.Note : The work shall be executed only through authorised applicator as approved by GE. |
| 117 | Supply and fix in repair 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed . |
| 118 | Material and labour for mirror polishing on marble/ granite/ Kota stone/ stone work where ever required to give high gloss finish complete all as specified and directed . Please Enable Macros to View BoQ information |
