|
| 1 | Contract Details |
| 2 | M&L demolition for brickwork or stone boulder masonary built in cement mortar or cement lime mortar inc all quoins, arches, pillars etc complete all as specifed and directed. |
| 3 | M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted buil in cement mortar 1:6 inc scaffolding as per requriment complete all as specifed and directed. |
| 4 | M&L for walling of random rubble, uncoursed, well bonded, bedded and solidly hearted buil in cement mortar 1:6 (Except stones) inc scaffolding if requried complete all as specifed and directed. |
| 5 | M&L for demotion of concrete of any description and in any position not otherwsie spl provided for complete all as spd and directed |
| 6 | M&L for cement concrete type B-1 1:2:4(20mm graded aggregate) as in coping, plinth courses, railing up to 60cm in height, bed plate, kerb and at any other location complete all as spd and directed. |
| 7 | M&L for racking out joints/pointing in cement or cement lime mortar to random rubble or polygen rubble uncoursed measonry or brought up courses complete all as specfied and directed. |
| 8 | M&L labour for flush pointing in cement mortar 1:4 on coursed or uncoursed random rubble measonary complete all as specified and directed. |
| 9 | Taking down of cement or cement lime plaster/skirting/ dado of any description from brick or stone wall etc. including raking out of joints, hacking for key, scrubbing down with water etc. |
| 10 | M&L applying 15 mm thick rendering in CM 1:4 on brick/ concrete surfaces of int. walls finished even and fair complete all as specified. |
| 11 | M&L preparing of new plastered surface of walls and applying two coat of white wash complete all as specified and directed by by engg - in- charge. |
| 12 | M&L for complete revomal of existing treatment inc cleaning with wire brush and making good the surface to recive paitning complete all as specifed and directed. |
| 13 | M&L applying two coat of white wash on stone wall / retaining wall complete all as specified and directed by by engg - in- charge. |
| 14 | M&L applying subsequent coat of white wash on stone wall / retaining wall complete all as specified and directed by by engg - in- charge. |
| 15 | M&L for prepration of old surface of wall inc complete removal of previous/existing treatment inc rubbing & washing down with water and carrying out petty repair and making the surface smooth for painting and than applying a coat of primer and two coat of acrylic smooth exterior paint of required shades all as spd and directed. |
| 16 | M&L for rolled MS setion as angles, falt iron, sheet etc as in gates, drain covers, staging for water tanks, section to recive barbed wire, concertina fence etc all as spd and directed. |
| 17 | Dismantling of wrought iron or mild steel work of any description |
| 18 | S&F in reapir galvanised 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standrad rails strain-ing bolts, Y-shape or L shape angles inc securing or tying at crossing with and provision of galvanised mild steel wire, staples or steel pins etc as directed (each line of wire to be measured) |
| 19 | M&L for Prepration of newly steel surfaces of any description, over 10cm in width or grith along with priming with red oxide, zinc chrome and applying two coat of synthetic enamel paint (ord. tint ) as specified and directed by engg-in-charge. |
| 20 | M&L for Prepration of old surfaces of any description, over 10cm in width or grith and applying one coat of synthetic enamel paint (ord. tint ) as specified and directed by engg-in-charge. |
| 21 | M&L for chequred cement concrete tiles 20cmX20cmX25mm thick set with grey cement and no pigment and pointed in cement slurry with pigment complete all as specified and directed. |
| 22 | M&L for chequred cement concrete tiles (Except tiles) 20cmX20cmX25mm thick set with grey cement and no pigment and pointed in cement slurry with pigment complete all as specified and directed. |
| 23 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubish off the premises. |
| 24 | M&L screed bed or bedding layer of mortar 15mm thick for laying floor finish and on surface of wallls behind tiles in CM (1:6) as specifed and directed. |
| 25 | Note :-Tenderers may be noted that amount of credit will be deducted from the total amount arrived, at the time of Acceptance of contract. Please Enable Macros to View BoQ information |
