|
| 1 | Purchase of Lab Equipments for ECE Dept |
| 2 | DC Voltmeter (Digital) (Item Code : C006) 1.DCVoltmeterANALOG – Moving coil -(0-10)V, Class1.0(±1%full- scale)accuracy - 5 NOS2.DCVoltmeterANALOG- Movingcoil-(0-30)V, Class1.0(±1%full-scale)accuracy - 4NOS |
| 3 | DC Ammeter(Item Code : C007)Specifications:•1. DCAmmeterANALOG–Movingcoil- (0-30)mA,. 5 NOS2. DCAmmeterAnalog -Movingcoil -(0-1000)μA, Class 1.0 (±1 % full-scale) accuracy - 5 NOS |
| 4 | Decade Capacitance Box(Item Code : C0011)Specifications:• Range: 100 pF to 100 μF • Rotary switch selection with 6 dials. • Maximum voltage: 350 V.• Accuracy: ±1%. |
| 5 | Decade Inductance Box(Item Code : C0012Specifications:• Range:10µHto10H. Rotaryswitchselectionwith6dials.• Low-lossinductors.• Accuracy:±1%. |
| 6 | 8051 Microcontroller Kit(Item Code : C0013)Specifications:•• Operating voltage: +5 V dc. • Flash memory: 4 kB (AT89C51) / 8 kB (AT89S52). • RAM: 128 bytes internal RAM. • 16 × 2 alphanumeric LCD display. • Push buttons / tactile switches. • DIP switches for digital input. • Inbuilt ADC interface: LDR, potentiometer. • Inbuilt DAC interface. • Inbuilt stepper motor driver with stepper motor. • Inbuilt DC motor driver with DC motor. • 1 × 4 LED array, 1 × 4 keypad, 1 × relay. • 1 × buzzer, 16 × 2 LCD display, 1 × PWM driver. • 1 × hardware interrupt key, inbuilt RTC. • Inbuilt EEPROM and UART module. • 4 × 7-segment display. • Supports both Assembly and C language programming. • PC interfaceable. |
| 7 | Embedded Trainer Kit (Using LPC2148) (Item Code : C0014)Specifications:• CPU - LPC2148, Core - 16/32 bit ARM7TDMI-S • Speed - Max 60 MHz, Flash - 512KB, RAM (on chip) – 40kB, 46 General Purpose I/OPins, USB2.0• One 10bit A/D Converter with 14 Analog inputs, One 10bit D/A Converter, Six PWM & Watchdog • Two UARTS (16c550), Two I2C (400Kb/s), Two SPI • Eight Bit Digital Output, Eight Bit Digital Input,16x2 Characters LCD and 4x4 matrixkeypad • One potentiometer for giving analog input, Relay & Buzzer Interface • I2C Devices: RTC, EEPROM and Seven segment Display, On Board Stepper MotorDriver • LM35 Temperature Sensor, One RS 232 Lines are Terminated at 9 Pin D type connector and USB interface • Board has inbuilt power supply and mounted in sturdy cabinet Accessories • USB cable with utility software to download programs from PC to target board • Power Cord, User Manual |
| 8 | Temperature Measurement Kit (Item Code : C0019)Specifications:• Sensors: RTD (PT-100), Thermocouple (Fe-K/J-type), and/or Thermistor (NTC). • Display: 3½ digit LED/LCD digital display (typically 200 mV FSD). • Temperature source: Portable water kettle or heater block. • Signal conditioning: On-board circuitry for amplification, linearization, and cold junction compensation. • Test points: Multiple 2 mm / 4 mm banana sockets for monitoring input/output signals. • Power supply: 230 V ac, 50 Hz, single-phase. • Accessories: Glass thermometer, 10 k NTC thermistor probe, K-type thermocouple probe, patch cords and User manual. |
| 9 | FPGA Trainer Kit(Item Code : C0025)Specifications:• Must use industry-standard mid-range FPGA device • USB-JTAG programmable, compatible with Vivado ISE (WebPACK). • Power supply: 5 V DC through USB or external adapter. • On-board peripherals: LEDs, switches, push buttons, 7-segment display,clock source, GPIO / Pmod expansion ports, UART, VGA / HDMI, USB UART bridge, USB cable.•User manual. Please Enable Macros to View BoQ information |
