|
| 1 | Providing and fixing of Knee Chair complete as per specification |
| 2 | Providing and fixing of Double skier complete as per specification |
| 3 | Providing and fixing of Shoulder wheel complete as per specification |
| 4 | Providing and fixing of Back shaper complete as per specification |
| 5 | Providing and fixing of Air Walker complete as per specification |
| 6 | Providing and fixing of Abs shaper complete as per specification |
| 7 | Providing and fixing of the horse complete as per specification |
| 8 | Providing and fixing of Shoulder shaper complete as per specification |
| 9 | Providing and fixing of parallel bars complete as per specification |
| 10 | Providing and fixing of chest shaper complete as per specification |
| 11 | Providing and fixing of single skier complete as per specification |
| 12 | Transportation All items |
| 13 | Installation charge all items |
| 14 | FRP dustbin (tilting type) of capacity 60 Ltr. Body is made of moulded fiberglass re-enforced plastic (non- halogen fire retardant resign) of 2mm thick having its lid with handle. It fitted with m.s. square pipe 1.25` x 1.25` x 14 gauge and m.s. flat 50 x 5mm, 30x 5mm base structure with Epoxy Primer INTERSEAL 670 HS and PU finish (Interthane 990) paints. Complete item with GST. Transportation, Installation with CC and labor at site. |
| 15 | Providing and installing FRP garden sitting bench with inbuilt LED lighting, made using high-quality translucent FRP panels featuring a multicolor artistic swirl design. The bench shall include a sturdy internal MS frame for support and waterproof (IP65-rated) LED strip lights installed inside for enhanced aesthetic appeal during evening and night hours. The lighting system shall be powered by a concealed low-voltage driver with proper wiring and protective conduits. Bench dimensions are approximately 1180 mm (L) x 460 mm (W) x 465 mm (H) with a seating cut-out of 255 mm x 90 mm, as per the approved drawing. The scope includes complete fabrication, transportation, on-site installation, testing, and commissioning with all necessary materials, labour, and accessories, to be completed as directed by the Engineer-in-Charge. |
| 16 | 1. FRP Molded Canopy (Gazebo Hex. Shape) Double Finishing sheet in 18`Diai) 6 No. Ornamental Design FRP Molded Pillar FRP Hexagonal Pillar base each side 195mm with vertical fitted design and height 970mm and having B class vertical m.s round pipe of size 88 mmX2.5mm thick and height 2890mm, the central m.s pipe holds FRP Molded taj 6no of size 260 x 260 x 210mm high suitably mounted at appropriate height complete as per design. Complete pillar suitably grinded and subsequently spray painted with two coats of P.0 Paints (1st Coat of Epoxy Surface Tolerance Primer INTERSEAL 670HS and 2nd Coat of PU finish Paint INTERTHANE 990 or Equal lent ( in required shade).ii)12 No. spndred and 6 no. FriezesFloral and Ornate decorative design combination of spandrel and frieze, matched to be suspended between two m.s pillars as per the design. The spandrel (L-Bracket) having length 420mm and height 400mm the frieze (Top Panel) height 250mm and length as per the size of the gazebo. The frieze mounted on m.s tabular pipe frame of size 50mm x 25mm, frieze properly welded to the column pillars at either ends. Complete set of spandrel and frieze uniformly grinded spray primered, spray painted with P.0 Paints(1st Coat of Epoxy Surface Tolerance Primer INTERSEAL 670HS and 2nd Coat of PU finish Paint INTERTHANE 990 or Equal lent ( in required shade)..iii) 3 No. M S rectangular tube /frp base panel railing with frameFloral and Ornate decorative design M S square pipe /frp side railing panel as per design having height of 730mm and length as per size of Gazebo. Each panel top and bottom mounted with mild steel tubular pipe frame of size 50 x 25 mm. The bottom mild steel pipe having 2 nos. of hold fasts in m.s pipe of size 40 x 40mm and length 250mm welded at the base to hold the panel in the ground. Every panel length is as per the gap between the two pillars. The complete railing panel grinded for neat surface finishes spray primered and subsequently spray painted with P.0 Paint in required shade(1st Coat of Epoxy Surface Tolerance Primer INTERSEAL 670HS and 2nd Coat of PU finish Paint INTERTHANE 990 or Equal lent ( in required shade).iv) One set of top frame with Double Finishing FRP Molded roof Top frame in MS tubular pipe of size 40 x 40mm properly welded and grinded. The top frame mounted with FRP molded Sheet of 4 mm thick with top and bottom good finishing (Double finishing sheet) to make it rust proof bent to profile of size 245mm width on either ends fixed horizontally along the length between column pillars. Also it contain FRP Molded Diamond Shape of 14` x 3 mm thick at the central top for its beautification. Each such sheet properly riveted to horizontal sheets. Complete canopy flooring with kota flooring/tile flooring at site as decided by Engineer-in-Charge and without sitting bench at site1. LED Light Strip from inside the canopy for Ambience look2. 1 Nos of Ceiling Fan inside the Canopy The scope includes complete fabrication, transportation, on-site installation, and commissioning with all necessary materials, labour, and accessories, to be completed as directed by the Engineer-in-Charge. |
| 17 | All HSR Items as per DNIT Please Enable Macros to View BoQ information |
