|
| 1 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 2 | 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 3 | 1:5:10 (1 cement : 5 coarse sand (zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 4 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: |
| 5 | Cement mortar 1:4 (1 cement : 4 coarse sand) |
| 6 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (Size 300 x 600 mm) |
| 7 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. |
| 8 | 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix : |
| 9 | 1:3 (1 cement: 3 fine sand) |
| 10 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I.brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required : |
| 11 | W.C. pan with ISI marked white solid plastic seat and lid |
| 12 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: |
| 13 | White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps |
| 14 | Providing and fixing white vitreous china water closet squatting pan (Indian type) : |
| 15 | Orissa pattern W.C. pan of size 580x440 mm |
| 16 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
| 17 | Providing and fixing controlled flush, low level cistern made of vitreous china with all fittings complete. |
| 18 | 10 litre (full flush) capacity-white |
| 19 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : |
| 20 | White solid plastic seat with lid |
| 21 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 22 | Flexible pipe |
| 23 | 32 mm dia |
| 24 | Providing and fixing trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, including cost of cutting and making good the walls and floors : |
| 25 | 100 mm inlet and 75 mm outlet |
| 26 | Sand cast iron S&S as per IS - 3989 |
| 27 | Providing and fixing PTMT 15 mm Urinal spreader size 95x69x100 mm with 1/2\\" BSP thread and shapes, weighing not less than 60 gms. |
| 28 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. |
| 29 | Internal work - Exposed on wall |
| 30 | 20 mm dia nominal bore |
| 31 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall : |
| 32 | 15 mm dia nominal bore |
| 33 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 34 | 20 mm nominal bore |
| 35 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 36 | 45 cm length |
| 37 | 15 mm nominal bore |
| 38 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) |
| 39 | 25 mm nominal bore |
| 40 | 32 mm nominal bore |
| 41 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 42 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 : |
| 43 | 15 mm nominal bore |
| 44 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. |
| 45 | 15 mm nominal bore |
| 46 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 |
| 47 | 15mm nominal bore |
| 48 | Providing and fixing PTMT Ball cock of approved quality, colour and make complete with Epoxy coated aluminium rod with L.P./ H.P.H.D. plastic ball. |
| 49 | 25 mm nominal bore, 152mm long, weighing not less than 440 gms |
| 50 | 40 mm nominal bore, 206mm long, weighing not less than 690 gms |
| 51 | Providing and Fixing of C.P. Brass Spindle (Heavy Duty) for bib taps and pillar taps weight approx. 110 grms complete in all respect as per approved make list attached. |
| 52 | Providing and fixing of C.P.steel grating hole /without hole heavy duty 100mm dia complete in all respect as per approved make list attached. |
| 53 | Providing and Fixing of C.P. Waste of 32mm & 150 mm complete in all respect. |
| 54 | Providing and fixing of PVC fitting for low level cistern complete in all respect. |
| 55 | Providing and Fixing C.P. Brass Soap Dish fixed into wall with C.P. Brass screws and complete in all respects including cutting and making good the walls etc. |
| 56 | Providing and fixing of C.P. Long Bend (1'-4\\" long) for OWC of size 32mm dia Complete in all respect. |
| 57 | Providing and fixing of PVC Handle for low level cistern complete in all respect. |
| 58 | Providing and Fixing white vitreous china flat back half stall urinal of size 420x395x635mm with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS:2556, C.I. trap with outlet grating and other couplingts in C.P. brass, including painting of fittings and cutting and making good the walls and floors whereever required : (As decided by the EIC) |
| 59 | Providing and Fixing PVC Tank Cover of different sizes complete in all respect. |
| 60 | 300/ 500/ 1000 Ltr |
| 61 | 2000/ 5000 Ltr |
| 62 | Providing and Fixing of Towel Ring of approved make complete in all respect. (For Wash Basin and Laboratory Sink) |
| 63 | Providing and Fixing of looking glass mirror 5mm thick of approved make with PVC Beading 1-1/2\\" x 3/4\\" with plastic hard board duly fixed on wall with screw/nuts/clips/rod plug etc complete in all respect to the satisfaction of EIC. |
| 64 | Providing and Fixing Single Lever Surgical Purpose Elbow Action Sink Mixer (Wall Mounted) of approved make with extended operating lever, connecting legs & wall flanges complete in all respect. (As decided by the EIC) Please Enable Macros to View BoQ information |
