|
| 1 | Begg’s Bracket bondable –flat |
| 2 | Begg’s Bracket bondable – curved |
| 3 | Preformed Molar Band Without Tube(upper)(each size) |
| 4 | Preformed Molar Band Without Tube(lower)(each size) |
| 5 | Begg’s Molar Tube (round) Weldable |
| 6 | Elastic Separators (Orthodontics) Posterior |
| 7 | Intra oral Elastics (Orthodontics) Latex based |
| 8 | Brass Pin (Orthodontics) Begg’s stage I |
| 9 | Brass Pin (Orthodontics) Begg’s stage II |
| 10 | Brass Pin (Orthodontics) Begg’s stage III |
| 11 | A J WILCOCK Australian wire(supreme) |
| 12 | A J WILCOCK Australian wire(supreme) size 0.020 “ |
| 13 | Preformed Ortho Plastic Base (for model preparation) |
| 14 | Band Material for Anterior – 0.003” X 0.125” |
| 15 | Band Material for canine & premolar size 0.004” X0.150” |
| 16 | Band Material Posterior size-0.005” X 0.150” |
| 17 | MBT Bracket Set Metallic |
| 18 | Preformed Wire: NiTi round (Upper & Lower both) |
| 19 | Preformed Wire: NiTi rectangular (Upper & Lower both) |
| 20 | Preformed Wire: Stainless Steel Round (Upper & Lower both) |
| 21 | Preformed Wire: Stainless Steel Rectangular |
| 22 | Posted Stainless Steel Arch Wire (SS 0.019” X 0.025”)upper &lower (each size) |
| 23 | Reverse Pull Head Gear (Facemask) Petit type |
| 24 | Standard slow Expansion Screw (Jack Screw) |
| 25 | Rapid Expansion Screws (Hyrax Screws) |
| 26 | Head Gear with Chin Cap (Size: Medium) |
| 27 | Head Gear with Face Bow standard short |
| 28 | Head Gear with Face Bow standard long |
| 29 | Face Mask Elastics (according to specification) |
| 30 | Elastomeric Chains |
| 31 | Silver Solder Wire (Diameter: 0.031”) |
| 32 | Orthodontic Flux |
| 33 | Ligature wire stainless steel Wire Spool of 5 meter |
| 34 | Ligature wire stainless steel 26 gauze |
| 35 | Elastic Module |
| 36 | Pre-formed Molar Band with Upper triple , lower double tube (MBT 0.022” slot) |
| 37 | Lingual Sheath (weldable) |
| 38 | Lingual button (Bondable) |
| 39 | Technical Wire Stainless Steel |
| 40 | Clinical Wire Stainless Steel |
| 41 | TMA Wire Straight 0.017” X 0.025” |
| 42 | TMA Wire Preformed 0.019” X 0.025” |
| 43 | Niti open coil spring for orthodontic work |
| 44 | MBT BONDABLE MOLAR TUBE WITH 0.022’’ SLOT FOR SECOND MOLAR |
| 45 | Relief Wax (Orthodontics) |
| 46 | Proximal abrasive strip |
| 47 | Crimpable hook |
| 48 | Fixed functional appliance |
| 49 | shade guide set |
| 50 | Metalic perforated Dental impression Tray for dentulous arch |
| 51 | Metalic perforated Dental impression Tray for Edentulous arch |
| 52 | Mouth Mirror top with handle |
| 53 | Calibrated straight probe /Williams Probe |
| 54 | Tweezer Dental |
| 55 | Disposable suction tips for dental suction unit |
| 56 | Stainless Steel Crowns kit for primary tooth |
| 57 | Dental Examintion Explorer (17/23) |
| 58 | Ultrasonic Scaler tip |
| 59 | Microtome Blade |
| 60 | Wire cutter |
| 61 | S.S Wire (0.7mm) |
| 62 | Titanium Bone plate 1.5mm “L” plate with screws & Drill bit |
| 63 | Titanium Bone Plates 2.0 mm “L” plate with screw & Drill bit |
| 64 | Periosteal elevators( Howarth) |
| 65 | Austin Flap Retractor |
| 66 | Kilner Cheek Retractor |
| 67 | Punch biopsy blade with handle |
| 68 | Metal mallet |
| 69 | Chisel ( 3mm, 5 mm) |
| 70 | Osteotome( 3mm, 5mm ) |
| 71 | Bone file |
| 72 | Maxillary anterior forcep |
| 73 | Maxillary Premolar Forcep |
| 74 | Maxillary Molar Forcep (pair) |
| 75 | Maxillary Root Forcep/ bayonet Forcep |
| 76 | Mandibular anterior forcep |
| 77 | Mandibular premolar Forcep |
| 78 | Mandibular Molar Forcep |
| 79 | Moon’s Probe |
| 80 | Hanger for X-ray film (Dental) |
| 81 | Coupland elevator |
| 82 | Cryer elevator( paired) |
| 83 | Warwick James elevator set of three |
| 84 | 1.5mm Screw driver set( self holding & slotted) |
| 85 | 2.0mm Screw driver set( self holding & slotted) |
| 86 | 2.5mm Screw driver set( self holding & slotted) |
| 87 | Paediatric extraction forcep kit |
| 88 | Arch Bar for fracture Repairing/Erich Arch Bar |
| 89 | Mouth prop |
| 90 | Sterile skin marking pen |
| 91 | Wire twister, Lawsontait forcep type |
| 92 | Endodontic K-file |
| 93 | Endodontic H-file |
| 94 | Barbed Broach |
| 95 | Spreader |
| 96 | GP Plugger |
| 97 | Intra Oral Periapical X-Ray film (size 0 ) |
| 98 | Intra Oral Periapical X-Ray film (size 2 ) |
| 99 | Intra Oral Occlusal X-Ray film (size-4) |
| 100 | Matrix band ( Ivory type) |
| 101 | Matrix band non contoured for Tofflemire retainers |
| 102 | Protaper files |
| 103 | Valcanite Surgical Bar (flame shaped) |
| 104 | HP6 Round- Straight Surgical Bar |
| 105 | HP4 Round- Straight Surgical Bar |
| 106 | HP8 Round- Straight Surgical Ba |
| 107 | 701 Tapered Fissure Surgical Bar |
| 108 | 702 Tapered Fissure Surgical Bar |
| 109 | 703 Tapered Fissure Surgical Bar |
| 110 | Round Diamond Bar for Air Rotor Handpiece |
| 111 | Straight Fissure Diamond Bar for Air Rotor Handpiece |
| 112 | Tapered Fissure Diamond Bar for Air Rotor Handpiece |
| 113 | Composite Finishing Kit |
| 114 | Ceramic/Porcelain finishing kit |
| 115 | Metal Polishing Kit |
| 116 | Composite Polishing Kit |
| 117 | Ceramic Polishing Kit |
| 118 | Dental Implants |
| 119 | Die spacer |
| 120 | Fiber optic laser tip |
| 121 | Fiber optic laser tip (cable loop) |
| 122 | Duran sheet |
| 123 | HIV Protective Kit |
| 124 | Slide Mailer |
| 125 | Chittle forcep container |
| 126 | Dental Laser Tip |
| 127 | Tungsten Carbide Bur (flame shaped) compatible with lab motor |
| 128 | Vulcanite Bur (pear shaped) |
| 129 | Straight Fissure TC Bur |
| 130 | Crown remover |
| 131 | Wax Knife |
| 132 | Plaster Spatula |
| 133 | Plastic Articulated Base Former |
| 134 | Micro Torch |
| 135 | Lacron carver |
| 136 | SS Acrylic Trimming Bur for Micro Motor (assorted) |
| 137 | Black Bristle Brush for lathe |
| 138 | Felcon for Lathe |
| 139 | Linen buff for Lathe |
| 140 | Sand Paper Mandrel |
| 141 | Stone Wheel |
| 142 | Wooden Mallet Big |
| 143 | Half Round Plier/Universal Plier |
| 144 | Cotton Buff For Lathe |
| 145 | Water Proof Sand Paper (Size-P320-280) |
| 146 | Polishing Cake |
| 147 | Intra-Oral Ramus Distractor Device 20mm |
| 148 | Intra-Oral Ramus Distractor Device 15mm |
| 149 | Bipolar Cautery Pencil with Cord |
| 150 | Metal Trimming Bur -- various shapes & size |
| 151 | Carborundum disc-Thin |
| 152 | Mandrel |
| 153 | Carborundum disc Thick |
| 154 | MORTER & PESTLE |
| 155 | DVT (Deep Vein Thrombosis Pump ) |
| 156 | XCP Film Holder |
| 157 | Soft Tissue Laser Tip |
| 158 | Sahel's Hemoglobino Meter |
| 159 | Westergren Pipette |
| 160 | Neubauer Chamber |
| 161 | Wintrobe Tube |
| 162 | Test Tube |
| 163 | Sterile Swab stick |
| 164 | Dropper Bottle (Plastic) |
| 165 | Endodontic explorer |
| 166 | Blade for skin grafting (To be attached on Humby knife) (pack of 10 pcs) |
| 167 | Needle tip (Colorado type/Conventional) |
| 168 | GCF COLLECTING STRIPS (Pack of at least sixteen test strips) |
| 169 | Diode Laser Tip (Size : 75mm X 200m) |
| 170 | Diamond glass marker |
| 171 | L Block (Leuckhart L block) |
| 172 | Glass Jar With Cover(Best Quality Big Size) |
| 173 | Glass Pipette |
| 174 | Aluminium slide tray |
| 175 | Endodontic excavator |
| 176 | Rubber Bowl Small |
| 177 | Rubber Bowl Big |
| 178 | Mean Value Articulator (3 pin Articulator) |
| 179 | Wax Spatula |
| 180 | Stainless steel screws minus slot 2mm * 10mm |
| 181 | Stainless steel screws minus slot 2mm * 8mm |
| 182 | Adjustable stainless steel vernier calliper |
| 183 | Cheek retractor ( small, medium) |
| 184 | Intraoral upper & lower mirror for case photography (set of 3) |
| 185 | Double Mox with Bull Nose type connector for H type oxygen Cylinder |
| 186 | Double Mox with Bull Nose type connector for H type Nitrous Oxide Cylinder |
| 187 | NEEDLE SUTURE CUTTING With Eye different Sizes |
| 188 | Educational Model |
| 189 | Ringless casting ring (Silicone) (Set of 4) |
| 190 | Wax dropper |
| 191 | Metal Calliper |
| 192 | Burs-563 |
| 193 | Diode Laser Tip (Size : 75mm X 200m) |
| 194 | X-ray film developing tanks |
| 195 | X-ray film drying cabinet |
| 196 | Pulse Oxymeter (Finger trip) |
| 197 | Laryngoscope stubby handle |
| 198 | Laryngoscope bulb |
| 199 | Nasal airway (size 6 , 6.5 , 7 ,7.5) |
| 200 | Spatula osteotome various sizes (3,5,10)mm |
| 201 | Fine needle holder (For 5-0,6-0 suture) TC tipped |
| 202 | Smith’s spreader |
| 203 | Coronoid retractors |
| 204 | Channel restractors |
| 205 | Cross head screw driver universal for plating |
| 206 | PRF Container Box Size-18cm Stainless steel Type- Autoclavable |
| 207 | Glass Vacutainer (Volume-10 ml Type- Autoclavable) |
| 208 | Acrylic trimming burs |
| 209 | Sand Paper Mandrel |
| 210 | Metal Trimming Bur -- various shapes & size |
| 211 | Hand piece for hanging motor ( ball bearing type ) |
| 212 | Bracket Holding Pliers |
| 213 | Proximal Contouring Pliers |
| 214 | Band Pinching Beak Pliers |
| 215 | Curved Hoe Pliers |
| 216 | Double Beak Pliers Anterior & Posterior |
| 217 | Straight Hoe Pliers |
| 218 | Adjustable Mouth Prop ( Infant, Child, Adult ) |
| 219 | Fine needle holder (For 5-0,6-0 suture) TC tipped |
| 220 | Wooden Mallet Big |
| 221 | Plaster knife |
| 222 | Orthodontic Mini Screw 1.5 X 8mm |
| 223 | Snap A Ray Film Holder |
| 224 | Metal Trimming Tungsten Carbide Bur compatible with lab type hand-piece |
| 225 | Gas sampling line (p/n 2097307-002) GE Carestation 620 anesthesia machine (pack of 10 pcs) |
| 226 | GP cutting scissor |
| 227 | Dermatome blade for skin graft |
| 228 | Plate cutter heavy |
| 229 | Titanium wire mesh 0.6mm thickness sheets (blue colour) with 2 mm screw hole diameter holes for screw fixation for fracture repair size 50mm by 50mm |
| 230 | Signal Lock (Autoclave Tape) |
| 231 | Glass slab (6'' x 3'' with thickness of 10mm) |
| 232 | Tin Cutter/ Ampule Cutter |
| 233 | Cumine Scaler |
| 234 | Sickle Scaler |
| 235 | Double ended broad scaler (U+L) |
| 236 | GP Plugger (Hand) |
| 237 | Small bowl (Galipot)- 120ml to 180ml |
| 238 | D-fend pro water trap (p/n-M1182629) for GE Carestation 620 anesthesia machine (pack of 10 pcs) |
| 239 | Universal Scaler |
| 240 | Ball Burnisher |
| 241 | Cement Spatula |
| 242 | Hoe Scaler |
| 243 | Cement carrier |
| 244 | Small escavater |
| 245 | Amalgum Plugger |
| 246 | Columbia curette - 2R/2L |
| 247 | Columbia curette - 4R/4L |
| 248 | Die cutting circular saw |
| 249 | BSIS (Slim) 9mm saw intended for the in-depth cutting of very dense cortical bones |
| 250 | Endoblock |
| 251 | IPR strips (around 6 inch length) |
| 252 | Big Steel tray for equipments 50cm |
| 253 | Molt’s no 9 periosteal elevator |
| 254 | Big Steel tray for instruments 30 cm |
| 255 | Endodontic files |
| 256 | Round bur (sizes- #2,#4,#6) |
| 257 | Endo Z bur |
| 258 | Orthodontic micro implant (Intra radicular) |
| 259 | Orthodontic micro implant (Bone screw) |
| 260 | Lingual Bracket |
| 261 | Self ligating Barcket |
| 262 | Ceramic Bracket |
| 263 | Sheets for Pressure Moulding Machine |
| 264 | Screw driver for Orthodontic micro implant placement and a palatal driver for palatal implant placement |
| 265 | NiTi Expander |
| 266 | MARPE device |
| 267 | Arch wire sleeves |
| 268 | Applicator tips on handle |
| 269 | Metallic Perforated Dental Impression Tray for dentulous arch – Rim lock |
| 270 | Metallic Perforated Dental Impression Tray for Edentulous arch - Rim lock |
| 271 | Ceramic crucible |
| 272 | Denture flask |
| 273 | Clamp of denture flask |
| 274 | Cotton Polishing Buff Wheel Shank |
| 275 | Wool Polishing Wheel |
| 276 | End cutting Diamond bur |
| 277 | Dental Surgical Curette |
| 278 | Doyen’s mouth gag with silicon cover |
| 279 | TMJ Prosthesis |
| 280 | Long shank drill bit (1.5mm) |
| 281 | Drill guide |
| 282 | Orbital mesh floor (Preformed) (Medium) |
| 283 | Orbital mesh floor (Preformed) (Large) |
| 284 | Genioplasty plate |
| 285 | Self holding screw driver (cross head) |
| 286 | Spatula osteotome |
| 287 | Regular osteotome |
| 288 | Lindeman Bur |
| 289 | External Distractor uniplanner |
| 290 | External Distractor multiplanner |
| 291 | Internal Distractor |
| 292 | Sharpening stone |
| 293 | Trauma kit Box |
| 294 | Bone Rongeur |
| 295 | Metal Suction Tip (Fraser’s) |
| 296 | Pterygoid chisel |
| 297 | Double guarded septal osteotome |
| 298 | Single guarded lateral nasal osteotome |
| 299 | Drill bit |
| 300 | Straight handpiece |
| 301 | Artery forcep curve |
| 302 | Mosquito curved forceps |
| 303 | Babcock forcep |
| 304 | Allie’s forceps |
| 305 | Adson’s tissue forceps toothed |
| 306 | Right angle artery forceps (Mixter) |
| 307 | Suture cutting scissor TC tipped |
| 308 | Metzenbaum scissor TC tipped |
| 309 | Titanium screw (single slot) |
| 310 | Emergency Titanium screw (single slot) |
| 311 | IMF screw |
| 312 | Titanium Plates 1.5 X 50 hole continuous |
| 313 | Titanium Plates 2 X 50 hole continuous |
| 314 | Titanium Plates 2.5 X 50 hole continuous |
| 315 | Titanium Plates 2 X 6 hole with Bar |
| 316 | Titanium Plates 2 X 4 hole with Bar |
| 317 | Titanium Plates 2.5 X 6 hole with Bar |
| 318 | Titanium Plates 1.5 X 6 hole with Bar |
| 319 | Titanium Plates 1.5 X 4 hole with Bar |
| 320 | Titanium Plates 2.5 X 4 hole with Bar |
| 321 | C plate 1.5 X 4 hole with gap (titanium) |
| 322 | C plate 1.5 X6 hole with gap (titanium) |
| 323 | C plate 1.5 X 6 hole without gap (titanium) |
| 324 | X plate (titanium) |
| 325 | Y plate (titanium) |
| 326 | Low Profile Recon Plate (titanium) (straight) |
| 327 | Low Profile Recon Plate (titanium) (angle) |
| 328 | Titanium 3D Plate (square) |
| 329 | Titanium 3D Plate (trapezoid) |
| 330 | Titanium 3D Plate (delta) |
| 331 | 2.5 mm (heavy) Reconstruction plate continuous 20 hole straight (titanium) |
| 332 | 2.5 mm (heavy) Reconstruction plate continuous curved with angle left (titanium) |
| 333 | 2.5 mm (heavy) Reconstruction plate continuous curved with angle right (titanium) |
| 334 | 2.5 mm (heavy) Reconstruction plate continuous angel to angle (titanium) |
| 335 | Reconstruction plate cutter(heavy) |
| 336 | Plate bender |
| 337 | Towel clips |
| 338 | Copper malleable retractor |
| 339 | Gigli saw with handle |
| 340 | Skin hook |
| 341 | Langenbeck retractor |
| 342 | Cat’s paw retractor |
| 343 | Tongue depressor |
| 344 | Spirit lamp |
| 345 | Ultrasonic Scaler • Power input 110V_50Hz-220V_50Hz • Main unit output 24V_1.3A • Output power 3W_20W • Frequency 28KHz ± 3KHz • Water pressure 0.1bar_5bar |
| 346 | Diamond disc for Micromotor |
| 347 | Hinge articulator |
| 348 | Tungsten Carbide air rotor bur for crown cutting |
| 349 | Niti close coil spring |
| 350 | Brass wire 2 gauze |
| 351 | Titanium screw (cross head) |
| 352 | Emergency Titanium screw (cross head) |
| 353 | Hybrid Arch Bar |
| 354 | Corrugated Rubber drain |
| 355 | 2-0 polyglactin cutting body suture material 70-90cm |
| 356 | Sterilized adhesive bandages |
| 357 | Orthodontic Mini screw driver Please Enable Macros to View BoQ information |
