|
| 1 | Cartage of PCC Pole from ESC to Work side & All Other Associated Material |
| 2 | Cartage of L.T PVC Cable & All other Associated Material (Top Chhannel, Dropper Angle, Pin Insulator, Disc Insulator Etc.) |
| 3 | Cartage and Loading Unloading of 250 KVA T/F |
| 4 | Cartage of ACSR Weasel Conductor |
| 5 | Cartage of AB Cable with Size of (3x120+1x95+1x16) sq mm |
| 6 | Cartage of Distribution Box |
| 7 | Cartage of Dropper Angle & Pin Insulator 11 KV for DO Fuse Set |
| 8 | Errection of PCC Pole For New/Existing Line |
| 9 | Concreting/Grouting of PCC Pole as per standard |
| 10 | Earthing of Pole/ TF as per standared |
| 11 | Installation of Tailless Unit 500 AMP |
| 12 | Installtion of Dropper Angle for Fuse Set with Pin Insulator 11 KV |
| 13 | Sagging of Weasel Conductor on already errected Pole with All Electrical Accesseries |
| 14 | Connecting of LT PVC Cable with Alluminium Lug & Copper Z Clamp |
| 15 | Stringing of AB Cable with Size of (3x120+1x95+1x16) sq mm |
| 16 | Mounted of Distribution Box at Errected Pole |
| 17 | Construction of Plinth For 250 KVA T/F Plinth (2x2x1.5 M) with All Associated Material |
| 18 | Mounted of 250 T/F on Constructed Plinth with All Associated Material |
| 19 | Installation of 250 KVA T/F with Jumphiring and Winding with All Associated Material |
| 20 | Fencing of 250 KVA with All Associated material(Fabrication of jali 4x3x2 Mtr.with M.S.Angle of50x50x06 mm and M.S.Flat off size 40x5 mmwith arrangement of 01 No. Gate of size 2.5X2Mtr. Double Door with proper lockingarrangement, Grouting with Cement stoneBallast and Common Sand, Painting with RedOxide and one coad with super Enamel andcomplete construction retaining wall four side offencing with proper plastering all sides 300 x 300mm) |
| 21 | Chemical Earthing with GI Strip, Chemical with material for T/F |
| 22 | Dismental and Receive Back 100 KVA T/F due to capacity enhancement from site to Store Center JNP |
| 23 | Holding clamps for Top/ Dropper channel TPMO & fuse set ete. with bolts & nuts |
| 24 | Stone Pad 300x300x75 mm |
| 25 | Tailless Unit 500 AMP |
| 26 | Copper L-piece 62x225x12 mm (LS) |
| 27 | Copper L-piece 50x225x10 mm (LS) |
| 28 | All. Leg Long Barrel off size (LS) |
| 29 | Danger Board |
| 30 | Al. Lug 240 Sq Mm |
| 31 | Dead End Clamp |
| 32 | Suspension Clamp |
| 33 | Piercing Connector |
| 34 | Eye hook |
| 35 | 3-Phase D O Fuse Set |
| 36 | Nut & Bolt of Variouse Size |
| 37 | Al PG clamps Weasel to Weasel Please Enable Macros to View BoQ information |
